mb/roda/rk9: Document flash header
Change-Id: I5bd131635340ffa0c6b8979fc8e263fc5f09fdc5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32025 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
This commit is contained in:
parent
2b99a01e0d
commit
10490b98e2
|
@ -81,6 +81,10 @@ The boards in this section are not real mainboards, but emulators.
|
||||||
|
|
||||||
- [MS-7707](msi/ms7707/ms7707.md)
|
- [MS-7707](msi/ms7707/ms7707.md)
|
||||||
|
|
||||||
|
## Roda
|
||||||
|
|
||||||
|
- [RK9 Flash Header](roda/rk9/flash_header.md)
|
||||||
|
|
||||||
## SiFive
|
## SiFive
|
||||||
|
|
||||||
- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
|
- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
|
||||||
|
|
|
@ -0,0 +1,23 @@
|
||||||
|
Roda RK9 Flash Header
|
||||||
|
=====================
|
||||||
|
|
||||||
|
There is a 5x2 pin, 1.27mm pitch header *J1* south of the BIOS flash. It
|
||||||
|
follows the pinout of the Dediprog adaptor board:
|
||||||
|
|
||||||
|
+------+
|
||||||
|
| 1 2 | 1: HOLD 2 2: CS 2
|
||||||
|
| 3 4 | 3: CS 1 4: VCC
|
||||||
|
| 5 6 | 5: MISO 6: HOLD 1
|
||||||
|
| 7 8 | 7: 8: CLK
|
||||||
|
| 9 10 | 9: GND 10: MOSI
|
||||||
|
+------+
|
||||||
|
|
||||||
|
Pins 3 to 10 directly map to the regular SPI flash pinout.
|
||||||
|
|
||||||
|
There is also a *JP17* around. Ideally, it should be closed during
|
||||||
|
programming (isolates the SPI bus from the southbridge):
|
||||||
|
|
||||||
|
+---+
|
||||||
|
| 1 | 1: SF100-I/O3
|
||||||
|
| 2 | 2: GND
|
||||||
|
+---+
|
Loading…
Reference in New Issue