[REMOVAL] tyan/s4880
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I41d1f9eac2f4c37bec4d046a68f3f1cf95b51703 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12384 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
Stefan Reinauer
parent
9fc5e0bc89
commit
1115625595
|
|
@ -1,57 +0,0 @@
|
|||
if BOARD_TYAN_S4880
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||
def_bool y
|
||||
select CPU_AMD_SOCKET_940
|
||||
select NORTHBRIDGE_AMD_AMDK8
|
||||
select SOUTHBRIDGE_AMD_AMD8111
|
||||
select SOUTHBRIDGE_AMD_AMD8131
|
||||
select SUPERIO_WINBOND_W83627HF
|
||||
select HAVE_OPTION_TABLE
|
||||
select HAVE_PIRQ_TABLE
|
||||
select HAVE_MP_TABLE
|
||||
select BOARD_ROMSIZE_KB_512
|
||||
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
|
||||
select QRANK_DIMM_SUPPORT
|
||||
|
||||
config MAINBOARD_DIR
|
||||
string
|
||||
default tyan/s4880
|
||||
|
||||
config DCACHE_RAM_BASE
|
||||
hex
|
||||
default 0xcf000
|
||||
|
||||
config DCACHE_RAM_SIZE
|
||||
hex
|
||||
default 0x01000
|
||||
|
||||
config APIC_ID_OFFSET
|
||||
hex
|
||||
default 0x10
|
||||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
default "S4880"
|
||||
|
||||
config MAX_CPUS
|
||||
int
|
||||
default 8
|
||||
|
||||
config MAX_PHYSICAL_CPUS
|
||||
int
|
||||
default 4
|
||||
|
||||
config HT_CHAIN_END_UNITID_BASE
|
||||
hex
|
||||
default 0x20
|
||||
|
||||
config HT_CHAIN_UNITID_BASE
|
||||
hex
|
||||
default 0x1
|
||||
|
||||
config IRQ_SLOT_COUNT
|
||||
int
|
||||
default 22
|
||||
|
||||
endif # BOARD_TYAN_S4880
|
||||
|
|
@ -1,2 +0,0 @@
|
|||
config BOARD_TYAN_S4880
|
||||
bool "S4880 (Thunder K8QS)"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Board name: Thunder K8QS (S4880)
|
||||
Category: server
|
||||
Board URL: http://www.tyan.com/archive/products/html/thunderk8qs.html
|
||||
Release year: 2004
|
||||
|
|
@ -1,60 +0,0 @@
|
|||
entries
|
||||
|
||||
0 384 r 0 reserved_memory
|
||||
384 1 e 4 boot_option
|
||||
388 4 r 0 reboot_bits
|
||||
392 3 e 5 baud_rate
|
||||
395 1 e 1 hw_scrubber
|
||||
396 1 e 1 interleave_chip_selects
|
||||
397 2 e 8 max_mem_clock
|
||||
399 1 e 2 multi_core
|
||||
400 1 e 1 power_on_after_fail
|
||||
412 4 e 6 debug_level
|
||||
440 4 e 9 slow_cpu
|
||||
444 1 e 1 nmi
|
||||
445 1 e 1 iommu
|
||||
456 1 e 1 ECC_memory
|
||||
728 256 h 0 user_data
|
||||
984 16 h 0 check_sum
|
||||
# Reserve the extended AMD configuration registers
|
||||
1000 24 r 0 amd_reserved
|
||||
|
||||
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
5 0 115200
|
||||
5 1 57600
|
||||
5 2 38400
|
||||
5 3 19200
|
||||
5 4 9600
|
||||
5 5 4800
|
||||
5 6 2400
|
||||
5 7 1200
|
||||
6 6 Notice
|
||||
6 7 Info
|
||||
6 8 Debug
|
||||
6 9 Spew
|
||||
8 0 DDR400
|
||||
8 1 DDR333
|
||||
8 2 DDR266
|
||||
8 3 DDR200
|
||||
9 0 off
|
||||
9 1 87.5%
|
||||
9 2 75.0%
|
||||
9 3 62.5%
|
||||
9 4 50.0%
|
||||
9 5 37.5%
|
||||
9 6 25.0%
|
||||
9 7 12.5%
|
||||
|
||||
checksums
|
||||
|
||||
checksum 392 983 984
|
||||
|
|
@ -1,98 +0,0 @@
|
|||
chip northbridge/amd/amdk8/root_complex
|
||||
device cpu_cluster 0 on
|
||||
chip cpu/amd/socket_940
|
||||
device lapic 0 on end
|
||||
end
|
||||
end
|
||||
|
||||
device domain 0 on
|
||||
subsystemid 0x10f1 0x4880 inherit
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 18.0 on end # LDT0
|
||||
device pci 18.0 on end # LDT1
|
||||
device pci 18.0 on # northbridge
|
||||
# devices on link 2, link 2 == LDT 2
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on
|
||||
# chip drivers/lsi/53c1030
|
||||
# device pci 4.0 on end
|
||||
# device pci 4.1 on end
|
||||
# register "fw_address" = "0xfff8c000"
|
||||
# end
|
||||
device pci 9.0 on end
|
||||
device pci 9.1 on end
|
||||
end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
chip southbridge/amd/amd8111
|
||||
# this "device pci 0.0" is the parent the next one
|
||||
# PCI bridge
|
||||
device pci 0.0 on
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 0.2 off end
|
||||
device pci 1.0 off end
|
||||
device pci 6.0 on end
|
||||
end
|
||||
device pci 1.0 on
|
||||
chip superio/winbond/w83627hf
|
||||
device pnp 2e.0 on # Floppy
|
||||
io 0x60 = 0x3f0
|
||||
irq 0x70 = 6
|
||||
drq 0x74 = 2
|
||||
end
|
||||
device pnp 2e.1 off # Parallel Port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 7
|
||||
end
|
||||
device pnp 2e.2 on # Com1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 off # Com2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.5 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
irq 0x72 = 12
|
||||
end
|
||||
device pnp 2e.6 off # CIR
|
||||
io 0x60 = 0x100
|
||||
end
|
||||
device pnp 2e.7 off # GAME_MIDI_GIPO1
|
||||
io 0x60 = 0x220
|
||||
io 0x62 = 0x300
|
||||
irq 0x70 = 9
|
||||
end
|
||||
device pnp 2e.8 off end # GPIO2
|
||||
device pnp 2e.9 off end # GPIO3
|
||||
device pnp 2e.a off end # ACPI
|
||||
device pnp 2e.b on # HW Monitor
|
||||
io 0x60 = 0x290
|
||||
irq 0x70 = 5
|
||||
end
|
||||
end
|
||||
end
|
||||
device pci 1.1 on end
|
||||
device pci 1.2 on end
|
||||
device pci 1.3 on end
|
||||
device pci 1.5 off end
|
||||
device pci 1.6 off end
|
||||
register "ide0_enable" = "1"
|
||||
register "ide1_enable" = "1"
|
||||
end
|
||||
end # device pci 18.0
|
||||
|
||||
device pci 18.1 on end
|
||||
device pci 18.2 on end
|
||||
device pci 18.3 on end
|
||||
end
|
||||
|
||||
end #domain
|
||||
end
|
||||
|
|
@ -1,43 +0,0 @@
|
|||
#include <arch/pirq_routing.h>
|
||||
|
||||
static const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
|
||||
1, /* Where the interrupt router lies (bus) */
|
||||
(4<<3)|3, /* Where the interrupt router lies (dev) */
|
||||
0, /* IRQs devoted exclusively to PCI usage */
|
||||
0x1022, /* Vendor */
|
||||
0x7400, /* Device */
|
||||
0, /* Miniport data */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||
0x9a, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
|
||||
{
|
||||
{0,0xc0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{1,(3<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x4,0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
|
||||
{0x4,0x8, {{0x1, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x4,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x1, 0},
|
||||
{0x4,0x18, {{0x2, 0xdef8}, {0x1, 0xdef8}, {0x3, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x4,0x28, {{0x4, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x4,0x30, {{0x3, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{1,(4<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{1,(1<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x2,0x18, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x2, 0},
|
||||
{0x2,0x10, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x3, 0},
|
||||
{0x2,0x48, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x2,0x20, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{1,(2<<3)|0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0x3,0x18, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x4, 0},
|
||||
{0x3,0x8, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x5, 0},
|
||||
{0x3,0x20, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x6, 0},
|
||||
{0x3,0x28, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x7, 0},
|
||||
{0,0xc8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0,0xd0, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
{0,0xd8, {{0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}, {0, 0xdef8}}, 0, 0},
|
||||
}
|
||||
};
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
return copy_pirq_routing_table(addr, &intel_irq_routing_table);
|
||||
}
|
||||
|
|
@ -1,214 +0,0 @@
|
|||
#include <console/console.h>
|
||||
#include <arch/smp/mpspec.h>
|
||||
#include <arch/ioapic.h>
|
||||
#include <device/pci.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
#if CONFIG_LOGICAL_CPUS
|
||||
#include <cpu/amd/multicore.h>
|
||||
#endif
|
||||
|
||||
static unsigned node_link_to_bus(unsigned node, unsigned link)
|
||||
{
|
||||
device_t dev;
|
||||
unsigned reg;
|
||||
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
|
||||
if (!dev) {
|
||||
return 0;
|
||||
}
|
||||
for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
|
||||
uint32_t config_map;
|
||||
unsigned dst_node;
|
||||
unsigned dst_link;
|
||||
unsigned bus_base;
|
||||
config_map = pci_read_config32(dev, reg);
|
||||
if ((config_map & 3) != 3) {
|
||||
continue;
|
||||
}
|
||||
dst_node = (config_map >> 4) & 7;
|
||||
dst_link = (config_map >> 8) & 3;
|
||||
bus_base = (config_map >> 16) & 0xff;
|
||||
#if 0
|
||||
printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
|
||||
dst_node, dst_link, bus_base,
|
||||
reg, config_map);
|
||||
#endif
|
||||
if ((dst_node == node) && (dst_link == link))
|
||||
{
|
||||
return bus_base;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void *smp_write_config_table(void *v)
|
||||
{
|
||||
struct mp_config_table *mc;
|
||||
int bus_isa;
|
||||
unsigned char bus_chain_0;
|
||||
unsigned char bus_8131_1;
|
||||
unsigned char bus_8131_2;
|
||||
unsigned char bus_8111_1;
|
||||
unsigned apicid_base;
|
||||
unsigned apicid_8111;
|
||||
unsigned apicid_8131_1;
|
||||
unsigned apicid_8131_2;
|
||||
|
||||
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
||||
|
||||
mptable_init(mc, LOCAL_APIC_ADDR);
|
||||
|
||||
smp_write_processors(mc);
|
||||
|
||||
{
|
||||
device_t dev;
|
||||
|
||||
/* HT chain 0 */
|
||||
bus_chain_0 = node_link_to_bus(0, 2);
|
||||
if (bus_chain_0 == 0) {
|
||||
printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n");
|
||||
bus_chain_0 = 1;
|
||||
}
|
||||
|
||||
/* 8111 */
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x03,0));
|
||||
if (dev) {
|
||||
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
else {
|
||||
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
|
||||
|
||||
bus_8111_1 = 4;
|
||||
}
|
||||
/* 8131-1 */
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x01,0));
|
||||
if (dev) {
|
||||
bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
|
||||
}
|
||||
else {
|
||||
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:01.0, using defaults\n");
|
||||
|
||||
bus_8131_1 = 2;
|
||||
}
|
||||
/* 8131-2 */
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0));
|
||||
if (dev) {
|
||||
bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
|
||||
}
|
||||
else {
|
||||
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n");
|
||||
|
||||
bus_8131_2 = 3;
|
||||
}
|
||||
}
|
||||
|
||||
/*Bus: Bus ID Type*/
|
||||
mptable_write_buses(mc, NULL, &bus_isa);
|
||||
|
||||
/*I/O APICs: APIC ID Version State Address*/
|
||||
#if CONFIG_LOGICAL_CPUS
|
||||
apicid_base = get_apicid_base(3);
|
||||
#else
|
||||
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
|
||||
#endif
|
||||
apicid_8111 = apicid_base+0;
|
||||
apicid_8131_1 = apicid_base+1;
|
||||
apicid_8131_2 = apicid_base+2;
|
||||
|
||||
smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR);
|
||||
{
|
||||
device_t dev;
|
||||
struct resource *res;
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x1,1));
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
smp_write_ioapic(mc, apicid_8131_1, 0x11,
|
||||
res2mmio(res, 0, 0));
|
||||
}
|
||||
}
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x2,1));
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
smp_write_ioapic(mc, apicid_8131_2, 0x11,
|
||||
res2mmio(res, 0, 0));
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0);
|
||||
|
||||
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (4<<2)|0, apicid_8111, 0x13);
|
||||
|
||||
|
||||
//On Board AMD USB
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
|
||||
|
||||
//On Board Via USB 1.1 and 2
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|0, apicid_8111, 0x11); //1.1
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|1, apicid_8111, 0x10); //1.1
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (3<<2)|2, apicid_8111, 0x12); //2
|
||||
|
||||
//Slot 5 PCI 32
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|0, apicid_8111, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|1, apicid_8111, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|2, apicid_8111, 0x12); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (4<<2)|3, apicid_8111, 0x13); //
|
||||
|
||||
|
||||
//On Board SI Serial ATA
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (5<<2)|0, apicid_8111, 0x13);
|
||||
//On Board ATI Display Adapter
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (6<<2)|0, apicid_8111, 0x12);
|
||||
|
||||
|
||||
//Slot 4 PCIX 100/66
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|0, apicid_8131_1, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|1, apicid_8131_1, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|2, apicid_8131_1, 0x1);//
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (3<<2)|3, apicid_8131_1, 0x2);//
|
||||
|
||||
//Slot 3 PCIX 100/66
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|0, apicid_8131_1, 0x2);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|1, apicid_8131_1, 0x3);//
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|2, apicid_8131_1, 0x0);//
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (2<<2)|3, apicid_8131_1, 0x1);//
|
||||
|
||||
//On Board LSI scsi and NIC
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|0, apicid_8131_1, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (4<<2)|1, apicid_8131_1, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|0, apicid_8131_1, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_1, (9<<2)|1, apicid_8131_1, 0x1);
|
||||
|
||||
//Slot 2 PCI-X 133/100/66
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|0, apicid_8131_2, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|1, apicid_8131_2, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|2, apicid_8131_2, 0x2); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (3<<2)|3, apicid_8131_2, 0x3); //
|
||||
|
||||
//Slot 1 PCI-X 133/100/66
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|0, apicid_8131_2, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|1, apicid_8131_2, 0x2);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|2, apicid_8131_2, 0x3);//
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8131_2, (1<<2)|3, apicid_8131_2, 0x0);//
|
||||
|
||||
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
|
||||
mptable_lintsrc(mc, bus_isa);
|
||||
/* There is no extension information... */
|
||||
|
||||
/* Compute the checksums */
|
||||
return mptable_finalize(mc);
|
||||
}
|
||||
|
||||
unsigned long write_smp_table(unsigned long addr)
|
||||
{
|
||||
void *v;
|
||||
v = smp_write_floating_table(addr, 0);
|
||||
return (unsigned long)smp_write_config_table(v);
|
||||
}
|
||||
|
|
@ -1,263 +0,0 @@
|
|||
/*
|
||||
* Tyan S4880 needs a different resource map
|
||||
*
|
||||
*/
|
||||
|
||||
static void setup_s4880_resource_map(void)
|
||||
{
|
||||
static const unsigned int register_values[] = {
|
||||
/* Careful set limit registers before base registers which contain the enables */
|
||||
/* DRAM Limit i Registers
|
||||
* F1:0x44 i = 0
|
||||
* F1:0x4C i = 1
|
||||
* F1:0x54 i = 2
|
||||
* F1:0x5C i = 3
|
||||
* F1:0x64 i = 4
|
||||
* F1:0x6C i = 5
|
||||
* F1:0x74 i = 6
|
||||
* F1:0x7C i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 3] Reserved
|
||||
* [10: 8] Interleave select
|
||||
* specifies the values of A[14:12] to use with interleave enable.
|
||||
* [15:11] Reserved
|
||||
* [31:16] DRAM Limit Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||
/* DRAM Base i Registers
|
||||
* F1:0x40 i = 0
|
||||
* F1:0x48 i = 1
|
||||
* F1:0x50 i = 2
|
||||
* F1:0x58 i = 3
|
||||
* F1:0x60 i = 4
|
||||
* F1:0x68 i = 5
|
||||
* F1:0x70 i = 6
|
||||
* F1:0x78 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 7: 2] Reserved
|
||||
* [10: 8] Interleave Enable
|
||||
* 000 = No interleave
|
||||
* 001 = Interleave on A[12] (2 nodes)
|
||||
* 010 = reserved
|
||||
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||
* 100 = reserved
|
||||
* 101 = reserved
|
||||
* 110 = reserved
|
||||
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||
* [15:11] Reserved
|
||||
* [13:16] DRAM Base Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40-bit address
|
||||
* that define the start of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
|
||||
|
||||
/* Memory-Mapped I/O Limit i Registers
|
||||
* F1:0x84 i = 0
|
||||
* F1:0x8C i = 1
|
||||
* F1:0x94 i = 2
|
||||
* F1:0x9C i = 3
|
||||
* F1:0xA4 i = 4
|
||||
* F1:0xAC i = 5
|
||||
* F1:0xB4 i = 6
|
||||
* F1:0xBC i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = Reserved
|
||||
* [ 6: 6] Reserved
|
||||
* [ 7: 7] Non-Posted
|
||||
* 0 = CPU writes may be posted
|
||||
* 1 = CPU writes must be non-posted
|
||||
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||
* This field defines the upp adddress bits of a 40-bit address that
|
||||
* defines the end of a memory-mapped I/O region n
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff20,
|
||||
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
* F1:0x88 i = 1
|
||||
* F1:0x90 i = 2
|
||||
* F1:0x98 i = 3
|
||||
* F1:0xA0 i = 4
|
||||
* F1:0xA8 i = 5
|
||||
* F1:0xB0 i = 6
|
||||
* F1:0xB8 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Cpu Disable
|
||||
* 0 = Cpu can use this I/O range
|
||||
* 1 = Cpu requests do not use this I/O range
|
||||
* [ 3: 3] Lock
|
||||
* 0 = base/limit registers i are read/write
|
||||
* 1 = base/limit registers i are read-only
|
||||
* [ 7: 4] Reserved
|
||||
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||
* This field defines the upper address bits of a 40bit address
|
||||
* that defines the start of memory-mapped I/O region i
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
|
||||
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
* F1:0xCC i = 1
|
||||
* F1:0xD4 i = 2
|
||||
* F1:0xDC i = 3
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = reserved
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Limit Address i
|
||||
* This field defines the end of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff020,
|
||||
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||
|
||||
/* PCI I/O Base i Registers
|
||||
* F1:0xC0 i = 0
|
||||
* F1:0xC8 i = 1
|
||||
* F1:0xD0 i = 2
|
||||
* F1:0xD8 i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 3: 2] Reserved
|
||||
* [ 4: 4] VGA Enable
|
||||
* 0 = VGA matches Disabled
|
||||
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||
* [ 5: 5] ISA Enable
|
||||
* 0 = ISA matches Disabled
|
||||
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||
* from matching agains this base/limit pair
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Base i
|
||||
* This field defines the start of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||
|
||||
/* Config Base and Limit i Registers
|
||||
* F1:0xE0 i = 0
|
||||
* F1:0xE4 i = 1
|
||||
* F1:0xE8 i = 2
|
||||
* F1:0xEC i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Device Number Compare Enable
|
||||
* 0 = The ranges are based on bus number
|
||||
* 1 = The ranges are ranges of devices on bus 0
|
||||
* [ 3: 3] Reserved
|
||||
* [ 6: 4] Destination Node
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 7] Reserved
|
||||
* [ 9: 8] Destination Link
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 - Reserved
|
||||
* [15:10] Reserved
|
||||
* [23:16] Bus Number Base i
|
||||
* This field defines the lowest bus number in configuration region i
|
||||
* [31:24] Bus Number Limit i
|
||||
* This field defines the highest bus number in configuration regin i
|
||||
*/
|
||||
// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0xff000203,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||
};
|
||||
int max;
|
||||
max = ARRAY_SIZE(register_values);
|
||||
setup_resource_map(register_values, max);
|
||||
}
|
||||
|
|
@ -1,151 +0,0 @@
|
|||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <stdlib.h>
|
||||
#include <pc80/mc146818rtc.h>
|
||||
#include <console/console.h>
|
||||
#include <lib.h>
|
||||
#include <cpu/amd/model_fxx_rev.h>
|
||||
#include "northbridge/amd/amdk8/incoherent_ht.c"
|
||||
#include "southbridge/amd/amd8111/early_smbus.c"
|
||||
#include <northbridge/amd/amdk8/raminit.h>
|
||||
#include <delay.h>
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
#include "northbridge/amd/amdk8/debug.c"
|
||||
#include <superio/winbond/common/winbond.h>
|
||||
#include <superio/winbond/w83627hf/w83627hf.h>
|
||||
#include <cpu/x86/bist.h>
|
||||
#include "northbridge/amd/amdk8/setup_resource_map.c"
|
||||
#include "southbridge/amd/amd8111/early_ctrl.c"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||
|
||||
static void memreset_setup(void)
|
||||
{
|
||||
if (is_cpu_pre_c0())
|
||||
outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
|
||||
else
|
||||
outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
|
||||
outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
udelay(800);
|
||||
outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
|
||||
udelay(90);
|
||||
}
|
||||
}
|
||||
|
||||
static inline void activate_spd_rom(const struct mem_controller *ctrl)
|
||||
{
|
||||
#define SMBUS_HUB 0x18
|
||||
unsigned device=(ctrl->channel0[0])>>8;
|
||||
smbus_write_byte(SMBUS_HUB, 0x01, device);
|
||||
smbus_write_byte(SMBUS_HUB, 0x03, 0);
|
||||
}
|
||||
|
||||
|
||||
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||
{
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
#include "northbridge/amd/amdk8/raminit.c"
|
||||
#include "northbridge/amd/amdk8/coherent_ht.c"
|
||||
#include "lib/generic_sdram.c"
|
||||
#include "resourcemap.c"
|
||||
#include "cpu/amd/dualcore/dualcore.c"
|
||||
#include <spd.h>
|
||||
#include "cpu/amd/model_fxx/init_cpus.c"
|
||||
|
||||
#define RC0 ((1<<2)<<8)
|
||||
#define RC1 ((1<<1)<<8)
|
||||
#define RC2 ((1<<4)<<8)
|
||||
#define RC3 ((1<<3)<<8)
|
||||
|
||||
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
static const struct mem_controller cpu[] = {
|
||||
{
|
||||
.node_id = 0,
|
||||
.f0 = PCI_DEV(0, 0x18, 0),
|
||||
.f1 = PCI_DEV(0, 0x18, 1),
|
||||
.f2 = PCI_DEV(0, 0x18, 2),
|
||||
.f3 = PCI_DEV(0, 0x18, 3),
|
||||
.channel0 = { RC0|DIMM0, RC0|DIMM2, 0, 0 },
|
||||
.channel1 = { RC0|DIMM1, RC0|DIMM3, 0, 0 },
|
||||
},
|
||||
#if CONFIG_MAX_PHYSICAL_CPUS > 1
|
||||
{
|
||||
.node_id = 1,
|
||||
.f0 = PCI_DEV(0, 0x19, 0),
|
||||
.f1 = PCI_DEV(0, 0x19, 1),
|
||||
.f2 = PCI_DEV(0, 0x19, 2),
|
||||
.f3 = PCI_DEV(0, 0x19, 3),
|
||||
.channel0 = { RC1|DIMM0, RC1|DIMM2 , 0, 0 },
|
||||
.channel1 = { RC1|DIMM1, RC1|DIMM3 , 0, 0 },
|
||||
|
||||
},
|
||||
#endif
|
||||
#if CONFIG_MAX_PHYSICAL_CPUS > 2
|
||||
{
|
||||
.node_id = 2,
|
||||
.f0 = PCI_DEV(0, 0x1a, 0),
|
||||
.f1 = PCI_DEV(0, 0x1a, 1),
|
||||
.f2 = PCI_DEV(0, 0x1a, 2),
|
||||
.f3 = PCI_DEV(0, 0x1a, 3),
|
||||
.channel0 = { RC2|DIMM0, RC2|DIMM2, 0, 0 },
|
||||
.channel1 = { RC2|DIMM1, RC2|DIMM3, 0, 0 },
|
||||
|
||||
},
|
||||
{
|
||||
.node_id = 3,
|
||||
.f0 = PCI_DEV(0, 0x1b, 0),
|
||||
.f1 = PCI_DEV(0, 0x1b, 1),
|
||||
.f2 = PCI_DEV(0, 0x1b, 2),
|
||||
.f3 = PCI_DEV(0, 0x1b, 3),
|
||||
.channel0 = { RC3|DIMM0, RC3|DIMM2, 0, 0 },
|
||||
.channel1 = { RC3|DIMM1, RC3|DIMM3, 0, 0 },
|
||||
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
int needs_reset;
|
||||
|
||||
if (bist == 0)
|
||||
init_cpus(cpu_init_detectedx);
|
||||
|
||||
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||
console_init();
|
||||
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
setup_s4880_resource_map();
|
||||
|
||||
needs_reset = setup_coherent_ht_domain();
|
||||
|
||||
#if CONFIG_LOGICAL_CPUS
|
||||
// It is said that we should start core1 after all core0 launched
|
||||
start_other_cores();
|
||||
#endif
|
||||
// automatically set that for you, but you might meet tight space
|
||||
needs_reset |= ht_setup_chains_x();
|
||||
|
||||
if (needs_reset) {
|
||||
printk(BIOS_INFO, "ht reset -\n");
|
||||
soft_reset();
|
||||
}
|
||||
|
||||
enable_smbus();
|
||||
|
||||
memreset_setup();
|
||||
sdram_initialize(ARRAY_SIZE(cpu), cpu);
|
||||
|
||||
post_cache_as_ram();
|
||||
}
|
||||
Loading…
Reference in New Issue