diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig index b7f2dc92c4..a9f49dbbfd 100644 --- a/src/soc/intel/apollolake/Kconfig +++ b/src/soc/intel/apollolake/Kconfig @@ -57,6 +57,7 @@ config CPU_SPECIFIC_OPTIONS select PCIEX_LENGTH_256MB select POSTCAR_CONSOLE select POSTCAR_STAGE + select PMC_INVALID_READ_AFTER_WRITE select REG_SCRIPT select RELOCATABLE_RAMSTAGE # Build fails if this is not selected select RTC diff --git a/src/soc/intel/common/block/pmc/Kconfig b/src/soc/intel/common/block/pmc/Kconfig index cfd12d8f3e..46f134e3b1 100644 --- a/src/soc/intel/common/block/pmc/Kconfig +++ b/src/soc/intel/common/block/pmc/Kconfig @@ -30,3 +30,10 @@ config POWER_STATE_PREVIOUS_AFTER_FAILURE power endchoice + +config PMC_INVALID_READ_AFTER_WRITE + bool + default n + help + Enable this for PMC devices where a read back of ACPI BAR and + IO access bit does not return the previously written value. diff --git a/src/soc/intel/common/block/pmc/pmc.c b/src/soc/intel/common/block/pmc/pmc.c index a3c5c4216c..f9563302df 100644 --- a/src/soc/intel/common/block/pmc/pmc.c +++ b/src/soc/intel/common/block/pmc/pmc.c @@ -65,6 +65,23 @@ static void pch_pmc_add_io_resources(struct device *dev, cfg->abase_addr, cfg->abase_size, IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED); + if (IS_ENABLED(CONFIG_PMC_INVALID_READ_AFTER_WRITE)) { + /* + * The ACPI IO BAR (offset 0x20) is not PCI compliant. We've + * observed cases where the BAR reads back as 0, but the IO + * window is open. This also means that it will not respond + * to PCI probing. + */ + pci_write_config16(dev, cfg->abase_offset, cfg->abase_addr); + /* + * In pci_dev_enable_resources, reading IO SPACE ACCESS bit in + * STATUSCOMMAND register does not read back the written + * value correctly, hence IO access gets disabled. This is + * seen in some PMC devices, hence this code makes sure + * IO access is available. + */ + dev->command |= PCI_COMMAND_IO; + } } static void pch_pmc_read_resources(struct device *dev)