mb/google/poppy/variants/rammus: add rammus devicetree.cb
Use the default value for Iccmax which is specified in vr_config.c. The AcLoadline and DcLoadline keep the poppy value. Besides, the USB 2.0 ports located on the mainboard are set to USB2_PORT_SHORT and the others on the daughterboard are set to USB2_PORT_LONG. Those setting need to be fine tuned later. BUG=b:111579386 BRANCH=Master TEST=Build pass Change-Id: Icabfac04c94b3d480872c243d811509e274ef122 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/27808 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
This commit is contained in:
Zhuohao Lee
Patrick Georgi
parent
351655cfd0
commit
11f016063f
|
|
@ -30,6 +30,7 @@ config DEVICETREE
|
|||
default "variants/nami/devicetree.cb" if BOARD_GOOGLE_NAMI
|
||||
default "variants/nautilus/devicetree.cb" if BOARD_GOOGLE_NAUTILUS
|
||||
default "variants/nocturne/devicetree.cb" if BOARD_GOOGLE_NOCTURNE
|
||||
default "variants/rammus/devicetree.cb" if BOARD_GOOGLE_RAMMUS
|
||||
default "variants/soraka/devicetree.cb" if BOARD_GOOGLE_SORAKA
|
||||
default "variants/baseboard/devicetree.cb"
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,336 @@
|
|||
chip soc/intel/skylake
|
||||
|
||||
# Deep Sx states
|
||||
register "deep_s3_enable_ac" = "0"
|
||||
register "deep_s3_enable_dc" = "0"
|
||||
register "deep_s5_enable_ac" = "1"
|
||||
register "deep_s5_enable_dc" = "1"
|
||||
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN | DSX_EN_WAKE_PIN | DSX_DIS_AC_PRESENT_PD"
|
||||
|
||||
# GPE configuration
|
||||
# Note that GPE events called out in ASL code rely on this
|
||||
# route. i.e. If this route changes then the affected GPE
|
||||
# offset bits also need to be changed.
|
||||
register "gpe0_dw0" = "GPP_B"
|
||||
register "gpe0_dw1" = "GPP_D"
|
||||
register "gpe0_dw2" = "GPP_E"
|
||||
|
||||
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
|
||||
register "gen1_dec" = "0x00fc0801"
|
||||
register "gen2_dec" = "0x000c0201"
|
||||
# EC memory map range is 0x900-0x9ff
|
||||
register "gen3_dec" = "0x00fc0901"
|
||||
|
||||
# Enable DPTF
|
||||
register "dptf_enable" = "1"
|
||||
|
||||
# Enable S0ix
|
||||
register "s0ix_enable" = "1"
|
||||
|
||||
# FSP Configuration
|
||||
register "ProbelessTrace" = "0"
|
||||
register "EnableLan" = "0"
|
||||
register "EnableSata" = "0"
|
||||
register "SataSalpSupport" = "0"
|
||||
register "SataMode" = "0"
|
||||
register "SataPortsEnable[0]" = "0"
|
||||
register "EnableAzalia" = "1"
|
||||
register "DspEnable" = "1"
|
||||
register "IoBufferOwnership" = "3"
|
||||
register "EnableTraceHub" = "0"
|
||||
register "SsicPortEnable" = "0"
|
||||
register "SmbusEnable" = "1"
|
||||
register "Cio2Enable" = "1"
|
||||
register "SaImguEnable" = "1"
|
||||
register "ScsEmmcEnabled" = "1"
|
||||
register "ScsEmmcHs400Enabled" = "1"
|
||||
register "ScsSdCardEnabled" = "2"
|
||||
register "PttSwitch" = "0"
|
||||
register "InternalGfx" = "1"
|
||||
register "SkipExtGfxScan" = "1"
|
||||
register "Device4Enable" = "1"
|
||||
register "HeciEnabled" = "0"
|
||||
register "SaGv" = "3"
|
||||
register "SerialIrqConfigSirqEnable" = "1"
|
||||
register "PmConfigSlpS3MinAssert" = "2" # 50ms
|
||||
register "PmConfigSlpS4MinAssert" = "1" # 1s
|
||||
register "PmConfigSlpSusMinAssert" = "1" # 500ms
|
||||
register "PmConfigSlpAMinAssert" = "3" # 2s
|
||||
register "PmTimerDisabled" = "1"
|
||||
register "VmxEnable" = "1"
|
||||
|
||||
register "pirqa_routing" = "PCH_IRQ11"
|
||||
register "pirqb_routing" = "PCH_IRQ10"
|
||||
register "pirqc_routing" = "PCH_IRQ11"
|
||||
register "pirqd_routing" = "PCH_IRQ11"
|
||||
register "pirqe_routing" = "PCH_IRQ11"
|
||||
register "pirqf_routing" = "PCH_IRQ11"
|
||||
register "pirqg_routing" = "PCH_IRQ11"
|
||||
register "pirqh_routing" = "PCH_IRQ11"
|
||||
|
||||
# VR Settings Configuration for 4 Domains
|
||||
#+----------------+-------+-------+-------+-------+
|
||||
#| Domain/Setting | SA | IA | GTUS | GTS |
|
||||
#+----------------+-------+-------+-------+-------+
|
||||
#| Psi1Threshold | 20A | 20A | 20A | 20A |
|
||||
#| Psi2Threshold | 2A | 2A | 2A | 2A |
|
||||
#| Psi3Threshold | 1A | 1A | 1A | 1A |
|
||||
#| Psi3Enable | 1 | 1 | 1 | 1 |
|
||||
#| Psi4Enable | 1 | 1 | 1 | 1 |
|
||||
#| ImonSlope | 0 | 0 | 0 | 0 |
|
||||
#| ImonOffset | 0 | 0 | 0 | 0 |
|
||||
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
|
||||
#| AcLoadline | 15 | 5.7 | 5.5 | 5.5 |
|
||||
#| DcLoadline | 14.3 | 4.83 | 4.2 | 4.2 |
|
||||
#+----------------+-------+-------+-------+-------+
|
||||
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(2),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.voltage_limit = 1520,
|
||||
.ac_loadline = 1500,
|
||||
.dc_loadline = 1430,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_IA_CORE]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(2),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.voltage_limit = 1520,
|
||||
.ac_loadline = 570,
|
||||
.dc_loadline = 483,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(2),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.voltage_limit = 1520,
|
||||
.ac_loadline = 550,
|
||||
.dc_loadline = 420,
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_SLICED]" = "{
|
||||
.vr_config_enable = 1,
|
||||
.psi1threshold = VR_CFG_AMP(20),
|
||||
.psi2threshold = VR_CFG_AMP(2),
|
||||
.psi3threshold = VR_CFG_AMP(1),
|
||||
.psi3enable = 1,
|
||||
.psi4enable = 1,
|
||||
.imon_slope = 0x0,
|
||||
.imon_offset = 0x0,
|
||||
.voltage_limit = 1520,
|
||||
.ac_loadline = 550,
|
||||
.dc_loadline = 420,
|
||||
}"
|
||||
|
||||
# Enable Root port 1.
|
||||
register "PcieRpEnable[0]" = "1"
|
||||
# Enable CLKREQ#
|
||||
register "PcieRpClkReqSupport[0]" = "1"
|
||||
# RP 1 uses SRCCLKREQ1#
|
||||
register "PcieRpClkReqNumber[0]" = "1"
|
||||
# RP 1 uses uses CLK SRC 1
|
||||
register "PcieRpClkSrcNumber[0]" = "1"
|
||||
# RP 1, Enable Advanced Error Reporting
|
||||
register "PcieRpAdvancedErrorReporting[0]" = "1"
|
||||
# RP 1, Enable Latency Tolerance Reporting Mechanism
|
||||
register "PcieRpLtrEnable[0]" = "1"
|
||||
|
||||
register "usb2_ports[0]" = "USB2_PORT_SHORT(OC0)" # Type-C Port 1
|
||||
register "usb2_ports[1]" = "USB2_PORT_LONG(OC3)" # Type-A Port
|
||||
register "usb2_ports[2]" = "USB2_PORT_SHORT(OC_SKIP)" # Bluetooth
|
||||
register "usb2_ports[4]" = "USB2_PORT_LONG(OC1)" # Type-C Port 2
|
||||
register "usb2_ports[6]" = "USB2_PORT_SHORT(OC_SKIP)" # H1
|
||||
register "usb2_ports[8]" = "USB2_PORT_SHORT(OC_SKIP)" # Camera
|
||||
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # Type-C Port 1
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC1)" # Type-C Port 2
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port
|
||||
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Empty
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT |
|
||||
#| I2C0 | Touchscreen |
|
||||
#| I2C1 | Trackpad |
|
||||
#| I2C5 | Audio |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 36,
|
||||
},
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 36,
|
||||
},
|
||||
.early_init = 1,
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.speed_config[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.scl_lcnt = 190,
|
||||
.scl_hcnt = 100,
|
||||
.sda_hold = 36,
|
||||
},
|
||||
},
|
||||
}"
|
||||
|
||||
# Touchscreen
|
||||
register "i2c_voltage[0]" = "I2C_VOLTAGE_3V3"
|
||||
|
||||
# Trackpad
|
||||
register "i2c_voltage[1]" = "I2C_VOLTAGE_3V3"
|
||||
|
||||
# Audio
|
||||
register "i2c_voltage[5]" = "I2C_VOLTAGE_1V8"
|
||||
|
||||
# Must leave UART0 enabled or SD/eMMC will not work as PCI
|
||||
register "SerialIoDevMode" = "{
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci,
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSpi0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexSpi1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUart0] = PchSerialIoPci,
|
||||
[PchSerialIoIndexUart1] = PchSerialIoDisabled,
|
||||
[PchSerialIoIndexUart2] = PchSerialIoSkipInit,
|
||||
}"
|
||||
|
||||
register "speed_shift_enable" = "1"
|
||||
register "psys_pmax" = "45"
|
||||
# PL2 override 18W for AML-Y
|
||||
register "tdp_pl2_override" = "18"
|
||||
register "tcc_offset" = "10" # TCC of 90C
|
||||
|
||||
# Use default SD card detect GPIO configuration
|
||||
register "sdcard_cd_gpio_default" = "GPP_E15"
|
||||
|
||||
# PCH Trip Temperature in degree C
|
||||
register "pch_trip_temp" = "75"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # Host Bridge
|
||||
device pci 02.0 on end # Integrated Graphics Device
|
||||
device pci 14.0 on end # USB xHCI
|
||||
device pci 14.1 on end # USB xDCI (OTG)
|
||||
device pci 14.2 on end # Thermal Subsystem
|
||||
device pci 15.0 on end # I2C #0
|
||||
device pci 15.1 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
|
||||
register "wake" = "GPE0_DW0_05" # GPP_B5
|
||||
device i2c 15 on end
|
||||
end
|
||||
end # I2C #1
|
||||
device pci 15.2 off end # I2C #2
|
||||
device pci 15.3 off end # I2C #3
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 16.1 off end # Management Engine Interface 2
|
||||
device pci 16.2 off end # Management Engine IDE-R
|
||||
device pci 16.3 off end # Management Engine KT Redirection
|
||||
device pci 16.4 off end # Management Engine Interface 3
|
||||
device pci 17.0 off end # SATA
|
||||
device pci 19.0 on end # UART #2
|
||||
device pci 19.1 on
|
||||
chip drivers/i2c/max98927
|
||||
register "interleave_mode" = "1"
|
||||
register "vmon_slot_no" = "4"
|
||||
register "imon_slot_no" = "5"
|
||||
register "uid" = "0"
|
||||
register "desc" = ""SSM4567 Right Speaker Amp""
|
||||
register "name" = ""MAXR""
|
||||
device i2c 39 on end
|
||||
end
|
||||
chip drivers/i2c/max98927
|
||||
register "interleave_mode" = "1"
|
||||
register "vmon_slot_no" = "6"
|
||||
register "imon_slot_no" = "7"
|
||||
register "uid" = "1"
|
||||
register "desc" = ""SSM4567 Left Speaker Amp""
|
||||
register "name" = ""MAXL""
|
||||
device i2c 3A on end
|
||||
end
|
||||
end # I2C #5
|
||||
device pci 19.2 off end # I2C #4
|
||||
device pci 1c.0 on
|
||||
chip drivers/intel/wifi
|
||||
register "wake" = "GPE0_DW0_00" # GPP_B0
|
||||
device pci 00.0 on end
|
||||
end
|
||||
end # PCI Express Port 1
|
||||
device pci 1c.1 off end # PCI Express Port 2
|
||||
device pci 1c.2 off end # PCI Express Port 3
|
||||
device pci 1c.3 off end # PCI Express Port 4
|
||||
device pci 1c.4 off end # PCI Express Port 5
|
||||
device pci 1c.5 off end # PCI Express Port 6
|
||||
device pci 1c.6 off end # PCI Express Port 7
|
||||
device pci 1c.7 off end # PCI Express Port 8
|
||||
device pci 1d.0 off end # PCI Express Port 9
|
||||
device pci 1d.1 off end # PCI Express Port 10
|
||||
device pci 1d.2 off end # PCI Express Port 11
|
||||
device pci 1d.3 off end # PCI Express Port 12
|
||||
device pci 1e.0 on end # UART #0
|
||||
device pci 1e.1 off end # UART #1
|
||||
device pci 1e.2 on
|
||||
chip drivers/spi/acpi
|
||||
register "hid" = "ACPI_DT_NAMESPACE_HID"
|
||||
register "compat_string" = ""google,cr50""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_E0_IRQ)"
|
||||
device spi 0 on end
|
||||
end
|
||||
end # GSPI #0
|
||||
device pci 1e.3 off end # GSPI #1
|
||||
device pci 1e.4 on end # eMMC
|
||||
device pci 1e.5 off end # SDIO
|
||||
device pci 1e.6 on end # SDCard
|
||||
device pci 1f.0 on
|
||||
chip ec/google/chromeec
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end # LPC Interface
|
||||
device pci 1f.1 on end # P2SB
|
||||
device pci 1f.2 on end # Power Management Controller
|
||||
device pci 1f.3 on end # Intel HDA
|
||||
device pci 1f.4 on end # SMBus
|
||||
device pci 1f.5 on end # PCH SPI
|
||||
device pci 1f.6 off end # GbE
|
||||
end
|
||||
end
|
||||
Loading…
Reference in New Issue