mb/google/nissa/var/craask: Disable SD card based on fw_config
Use fw_config Bit 5 to control whether to disable SD card: Bit 5 = 0 --> enable SD card Bit 5 = 1 --> disable SD card BUG=b:229048361 TEST=emerge-nissa coreboot Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Ib5e92600564e2138e32a0d2e60259b9767516a4c Reviewed-on: https://review.coreboot.org/c/coreboot/+/65129 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
3c5a638e32
commit
129e6b7c09
|
@ -36,6 +36,15 @@ static const struct pad_config wfc_disable_pads[] = {
|
||||||
PAD_NC(GPP_R7, NONE),
|
PAD_NC(GPP_R7, NONE),
|
||||||
};
|
};
|
||||||
|
|
||||||
|
static const struct pad_config sd_disable_pads[] = {
|
||||||
|
/* D8 : SD_CLKREQ_ODL */
|
||||||
|
PAD_NC(GPP_D8, NONE),
|
||||||
|
/* H12 : SD_PERST_L */
|
||||||
|
PAD_NC(GPP_H12, NONE),
|
||||||
|
/* H13 : EN_PP3300_SD_X */
|
||||||
|
PAD_NC(GPP_H13, NONE),
|
||||||
|
};
|
||||||
|
|
||||||
static void fw_config_handle(void *unused)
|
static void fw_config_handle(void *unused)
|
||||||
{
|
{
|
||||||
if (fw_config_probe(FW_CONFIG(DB_USB, DB_1C_LTE))) {
|
if (fw_config_probe(FW_CONFIG(DB_USB, DB_1C_LTE))) {
|
||||||
|
@ -50,5 +59,11 @@ static void fw_config_handle(void *unused)
|
||||||
printk(BIOS_INFO, "Disable MIPI WFC GPIO pins.\n");
|
printk(BIOS_INFO, "Disable MIPI WFC GPIO pins.\n");
|
||||||
gpio_configure_pads(wfc_disable_pads, ARRAY_SIZE(wfc_disable_pads));
|
gpio_configure_pads(wfc_disable_pads, ARRAY_SIZE(wfc_disable_pads));
|
||||||
}
|
}
|
||||||
|
|
||||||
|
if (fw_config_probe(FW_CONFIG(SD_CARD, SD_ABSENT))) {
|
||||||
|
printk(BIOS_INFO, "Disable SD card GPIO pins.\n");
|
||||||
|
gpio_configure_pads(sd_disable_pads, ARRAY_SIZE(sd_disable_pads));
|
||||||
|
}
|
||||||
|
|
||||||
}
|
}
|
||||||
BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);
|
BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);
|
||||||
|
|
|
@ -13,6 +13,10 @@ fw_config
|
||||||
option STYLUS_ABSENT 0
|
option STYLUS_ABSENT 0
|
||||||
option STYLUS_PRESENT 1
|
option STYLUS_PRESENT 1
|
||||||
end
|
end
|
||||||
|
field SD_CARD 5
|
||||||
|
option SD_GL9750S 0
|
||||||
|
option SD_ABSENT 1
|
||||||
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
chip soc/intel/alderlake
|
chip soc/intel/alderlake
|
||||||
|
@ -320,6 +324,21 @@ chip soc/intel/alderlake
|
||||||
device generic 0 on end
|
device generic 0 on end
|
||||||
end
|
end
|
||||||
end
|
end
|
||||||
|
device ref pcie_rp7 on
|
||||||
|
# Enable SD Card PCIe 7 using clk 3
|
||||||
|
register "pch_pcie_rp[PCH_RP(7)]" = "{
|
||||||
|
.clk_src = 3,
|
||||||
|
.clk_req = 3,
|
||||||
|
.flags = PCIE_RP_HOTPLUG | PCIE_RP_LTR | PCIE_RP_AER,
|
||||||
|
}"
|
||||||
|
chip soc/intel/common/block/pcie/rtd3
|
||||||
|
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
|
||||||
|
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_H12)"
|
||||||
|
register "srcclk_pin" = "3"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
probe SD_CARD SD_GL9750S
|
||||||
|
end
|
||||||
device ref pch_espi on
|
device ref pch_espi on
|
||||||
chip ec/google/chromeec
|
chip ec/google/chromeec
|
||||||
use conn0 as mux_conn[0]
|
use conn0 as mux_conn[0]
|
||||||
|
|
Loading…
Reference in New Issue