GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Signed-off-by: Rudolf Marek <r.marek@assembler.cz> 

Acked-by: Stefan Reinauer <stepan@coresystems.de>

Add Asrock 939a785gmh motherboard. The ACPI needs more cleanup, could be done when cleaning
the Mahagony board. The SidePort mode does not work because AMD hardcoded memory type in rs780_gfx.c
The UMA is enabled instead. The board boots, network and int VGA works, IDE too. 



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5357 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Rudolf Marek 2010-04-05 19:47:34 +00:00
parent f932c2edad
commit 133647aa86
22 changed files with 5166 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
src/mainboard/Kconfig
View File

@ -16,6 +16,8 @@ config VENDOR_ARTEC_GROUP
bool "Artec Group"
config VENDOR_ASI
bool "ASI"
config VENDOR_ASROCK
bool "ASROCK"
config VENDOR_ASUS
bool "ASUS"
config VENDOR_A_TREND
@ -129,6 +131,11 @@ config MAINBOARD_VENDOR
default "ASI"
depends on VENDOR_ASI
config MAINBOARD_VENDOR
string
default "ASROCK"
depends on VENDOR_ASROCK
config MAINBOARD_VENDOR
string
default "ASUS"
@ -366,6 +373,7 @@ source "src/mainboard/amd/Kconfig"
source "src/mainboard/arima/Kconfig"
source "src/mainboard/artecgroup/Kconfig"
source "src/mainboard/asi/Kconfig"
source "src/mainboard/asrock/Kconfig"
source "src/mainboard/asus/Kconfig"
source "src/mainboard/axus/Kconfig"
source "src/mainboard/azza/Kconfig"

123
src/mainboard/asrock/939a785gmh/Kconfig Normal file
View File

@ -0,0 +1,123 @@
config BOARD_ASROCK_939A785GMH
bool "939A785GMH/128M"
select ARCH_X86
select CPU_AMD_SOCKET_939
select K8_HT_FREQ_1G_SUPPORT
select NORTHBRIDGE_AMD_AMDK8
select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
select SOUTHBRIDGE_AMD_RS780
select SOUTHBRIDGE_AMD_SB700
select SUPERIO_WINBOND_W83627DHG
select BOARD_HAS_FADT
select GENERATE_ACPI_TABLES
select GENERATE_MP_TABLE
select GENERATE_PIRQ_TABLE
select HAVE_MAINBOARD_RESOURCES
select HAVE_BUS_CONFIG
select LIFT_BSP_APIC_ID
select USE_PRINTK_IN_CAR
select USE_DCACHE_RAM
select HAVE_HARD_RESET
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
select BOARD_ROMSIZE_KB_1024
select GFXUMA
config MAINBOARD_DIR
string
default asrock/939a785gmh
depends on BOARD_ASROCK_939A785GMH
config HAVE_HIGH_TABLES
bool
default n
depends on BOARD_ASROCK_939A785GMH
config DCACHE_RAM_BASE
hex
default 0xc8000
depends on BOARD_ASROCK_939A785GMH
config DCACHE_RAM_SIZE
hex
default 0x08000
depends on BOARD_ASROCK_939A785GMH
config DCACHE_RAM_GLOBAL_VAR_SIZE
hex
default 0x01000
depends on BOARD_ASROCK_939A785GMH
config APIC_ID_OFFSET
hex
default 0x0
depends on BOARD_ASROCK_939A785GMH
config LB_CKS_RANGE_END
int
default 122
depends on BOARD_ASROCK_939A785GMH
config LB_CKS_LOC
int
default 123
depends on BOARD_ASROCK_939A785GMH
config MAINBOARD_PART_NUMBER
string
default "939A785GMH"
depends on BOARD_ASROCK_939A785GMH
config HW_MEM_HOLE_SIZEK
hex
default 0x100000
depends on BOARD_ASROCK_939A785GMH
config MAX_CPUS
int
default 8
depends on BOARD_ASROCK_939A785GMH
config MAX_PHYSICAL_CPUS
int
default 2
depends on BOARD_ASROCK_939A785GMH
config HW_MEM_HOLE_SIZE_AUTO_INC
bool
default n
depends on BOARD_ASROCK_939A785GMH
config SB_HT_CHAIN_ON_BUS0
int
default 1
depends on BOARD_ASROCK_939A785GMH
config HT_CHAIN_END_UNITID_BASE
hex
default 0x1
depends on BOARD_ASROCK_939A785GMH
config HT_CHAIN_UNITID_BASE
hex
default 0x0
depends on BOARD_ASROCK_939A785GMH
config USE_INIT
bool
default n
depends on BOARD_ASROCK_939A785GMH
config IRQ_SLOT_COUNT
int
default 11
depends on BOARD_ASROCK_939A785GMH
config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
hex
default 0x1022
depends on BOARD_ASROCK_939A785GMH
config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
hex
default 0x3060
depends on BOARD_ASROCK_939A785GMH

198
src/mainboard/asrock/939a785gmh/acpi/debug.asl Normal file
View File

@ -0,0 +1,198 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
DefinitionBlock (
"DSDT.AML",
"DSDT",
0x01,
"XXXXXX",
"XXXXXXXX",
0x00010001
)
{
#include "debug.asl"
}
*/
/*
* 0x80: POST_BASE
* 0x3F8: DEBCOM_BASE
* X80: POST_REGION
* P80: PORT80
*
* CREG: DEBCOM_REGION
* CUAR: DEBCOM_UART
* CDAT: DEBCOM_DATA
* CDLM: DEBCOM_DLM
* DLCR: DEBCOM_LCR
* CMCR: DEBCOM_MCR
* CLSR: DEBCOM_LSR
*
* DEBUG_INIT DINI
*/
OperationRegion(X80, SystemIO, 0x80, 1)
Field(X80, ByteAcc, NoLock, Preserve)
{
P80, 8
}
OperationRegion(CREG, SystemIO, 0x3F8, 8)
Field(CREG, ByteAcc, NoLock, Preserve)
{
CDAT, 8,
CDLM, 8,, 8, DLCR, 8, CMCR, 8, CLSR, 8
}
/*
* DINI
* Initialize the COM port to 115,200 8-N-1
*/
Method(DINI)
{
store(0x83, DLCR)
store(0x01, CDAT) /* 115200 baud (low) */
store(0x00, CDLM) /* 115200 baud (high) */
store(0x03, DLCR) /* word=8 stop=1 parity=none */
store(0x03, CMCR) /* DTR=1 RTS=1 Out2=Off Loop=Off */
store(0x00, CDLM) /* turn off interrupts */
}
/*
* THRE
* Wait for COM port transmitter holding register to go empty
*/
Method(THRE)
{
and(CLSR, 0x20, local0)
while (Lequal(local0, Zero)) {
and(CLSR, 0x20, local0)
}
}
/*
* OUTX
* Send a single raw character
*/
Method(OUTX, 1)
{
THRE()
store(Arg0, CDAT)
}
/*
* OUTC
* Send a single character, expanding LF into CR/LF
*/
Method(OUTC, 1)
{
if (LEqual(Arg0, 0x0a)) {
OUTX(0x0d)
}
OUTX(Arg0)
}
/*
* DBGN
* Send a single hex nibble
*/
Method(DBGN, 1)
{
and(Arg0, 0x0f, Local0)
if (LLess(Local0, 10)) {
add(Local0, 0x30, Local0)
} else {
add(Local0, 0x37, Local0)
}
OUTC(Local0)
}
/*
* DBGB
* Send a hex byte
*/
Method(DBGB, 1)
{
ShiftRight(Arg0, 4, Local0)
DBGN(Local0)
DBGN(Arg0)
}
/*
* DBGW
* Send a hex word
*/
Method(DBGW, 1)
{
ShiftRight(Arg0, 8, Local0)
DBGB(Local0)
DBGB(Arg0)
}
/*
* DBGD
* Send a hex Dword
*/
Method(DBGD, 1)
{
ShiftRight(Arg0, 16, Local0)
DBGW(Local0)
DBGW(Arg0)
}
/*
* DBGO
* Send either a string or an integer
*/
Method(DBGO, 1)
{
/* DINI() */
if (LEqual(ObjectType(Arg0), 1)) {
if (LGreater(Arg0, 0xffff)) {
DBGD(Arg0)
} else {
if (LGreater(Arg0, 0xff)) {
DBGW(Arg0)
} else {
DBGB(Arg0)
}
}
} else {
Name(BDBG, Buffer(80) {})
store(Arg0, BDBG)
store(0, Local1)
while (One) {
store(GETC(BDBG, Local1), Local0)
if (LEqual(Local0, 0)) {
return (0)
}
OUTC(Local0)
Increment(Local1)
}
}
return (0)
}
/* Get a char from a string */
Method(GETC, 2)
{
CreateByteField(Arg0, Arg1, DBGC)
return (DBGC)
}

118
src/mainboard/asrock/939a785gmh/acpi/globutil.asl Normal file
View File

@ -0,0 +1,118 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
Scope(\_SB) {
#include "globutil.asl"
}
*/
/* string compare functions */
Method(MIN, 2)
{
if (LLess(Arg0, Arg1)) {
Return(Arg0)
} else {
Return(Arg1)
}
}
Method(SLEN, 1)
{
Store(Arg0, Local0)
Return(Sizeof(Local0))
}
Method(S2BF, 1)
{
Add(SLEN(Arg0), One, Local0)
Name(BUFF, Buffer(Local0) {})
Store(Arg0, BUFF)
Return(BUFF)
}
/* Strong string compare. Checks both length and content */
Method(SCMP, 2)
{
Store(S2BF(Arg0), Local0)
Store(S2BF(Arg1), Local1)
Store(Zero, Local4)
Store(SLEN(Arg0), Local5)
Store(SLEN(Arg1), Local6)
Store(MIN(Local5, Local6), Local7)
While(LLess(Local4, Local7)) {
Store(Derefof(Index(Local0, Local4)), Local2)
Store(Derefof(Index(Local1, Local4)), Local3)
if (LGreater(Local2, Local3)) {
Return(One)
} else {
if (LLess(Local2, Local3)) {
Return(Ones)
}
}
Increment(Local4)
}
if (LLess(Local4, Local5)) {
Return(One)
} else {
if (LLess(Local4, Local6)) {
Return(Ones)
} else {
Return(Zero)
}
}
}
/* Weak string compare. Checks to find Arg1 at beginning of Arg0.
* Fails if length(Arg0) < length(Arg1). Returns 0 on Fail, 1 on
* Pass.
*/
Method(WCMP, 2)
{
Store(S2BF(Arg0), Local0)
Store(S2BF(Arg1), Local1)
if (LLess(SLEN(Arg0), SLEN(Arg1))) {
Return(0)
}
Store(Zero, Local2)
Store(SLEN(Arg1), Local3)
While(LLess(Local2, Local3)) {
if (LNotEqual(Derefof(Index(Local0, Local2)),
Derefof(Index(Local1, Local2)))) {
Return(0)
}
Increment(Local2)
}
Return(One)
}
/* ARG0 = IRQ Number(0-15)
* Returns Bit Map
*/
Method(I2BM, 1)
{
Store(0, Local0)
if (LNotEqual(ARG0, 0)) {
Store(1, Local1)
ShiftLeft(Local1, ARG0, Local0)
}
Return(Local0)
}

244
src/mainboard/asrock/939a785gmh/acpi/ide.asl Normal file
View File

@ -0,0 +1,244 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
Scope (_SB) {
Device(PCI0) {
Device(IDEC) {
Name(_ADR, 0x00140001)
#include "ide.asl"
}
}
}
*/
/* Some timing tables */
Name(UDTT, Package(){ /* Udma timing table */
120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
})
Name(MDTT, Package(){ /* MWDma timing table */
480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
})
Name(POTT, Package(){ /* Pio timing table */
600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
})
/* Some timing register value tables */
Name(MDRT, Package(){ /* MWDma timing register table */
0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
})
Name(PORT, Package(){
0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
})
OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
Field(ICRG, AnyAcc, NoLock, Preserve)
{
PPTS, 8, /* Primary PIO Slave Timing */
PPTM, 8, /* Primary PIO Master Timing */
OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
PMTM, 8, /* Primary MWDMA Master Timing */
OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
PPSM, 4, /* Primary PIO slave Mode */
OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
PDSM, 4, /* Primary UltraDMA Mode */
}
Method(GTTM, 1) /* get total time*/
{
Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
Increment(Local0)
Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
Increment(Local1)
Return(Multiply(30, Add(Local0, Local1)))
}
Device(PRID)
{
Name (_ADR, Zero)
Method(_GTM, 0)
{
NAME(OTBF, Buffer(20) { /* out buffer */
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
})
CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
/* Just return if the channel is disabled */
If(And(PPCR, 0x01)) { /* primary PIO control */
Return(OTBF)
}
/* Always tell them independent timing available and IOChannelReady used on both drives */
Or(BFFG, 0x1A, BFFG)
Store(GTTM(PPTM), PSD0) /* save total time of primary PIO master timming to PIO spd0 */
Store(GTTM(PPTS), PSD1) /* save total time of primary PIO slave Timing to PIO spd1 */
If(And(PDCR, 0x01)) { /* It's under UDMA mode */
Or(BFFG, 0x01, BFFG)
Store(DerefOf(Index(UDTT, PDMM)), DSD0)
}
Else {
Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
}
If(And(PDCR, 0x02)) { /* It's under UDMA mode */
Or(BFFG, 0x04, BFFG)
Store(DerefOf(Index(UDTT, PDSM)), DSD1)
}
Else {
Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
}
Return(OTBF) /* out buffer */
} /* End Method(_GTM) */
Method(_STM, 3, NotSerialized)
{
NAME(INBF, Buffer(20) { /* in buffer */
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
})
CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
CreateDwordField(INBF, 16, BFFG) /*buffer flag */
Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
Divide(Local0, 7, PDMM,)
Or(PDCR, 0x01, PDCR)
}
Else {
If(LNotEqual(DSD0, 0xFFFFFFFF)) {
Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
Store(DerefOf(Index(MDRT, Local0)), PMTM)
}
}
If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
Divide(Local0, 7, PDSM,)
Or(PDCR, 0x02, PDCR)
}
Else {
If(LNotEqual(DSD1, 0xFFFFFFFF)) {
Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
Store(DerefOf(Index(MDRT, Local0)), PMTS)
}
}
/* Return(INBF) */
} /*End Method(_STM) */
Device(MST)
{
Name(_ADR, 0)
Method(_GTF) {
Name(CMBF, Buffer(21) {
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
})
CreateByteField(CMBF, 1, POMD)
CreateByteField(CMBF, 8, DMMD)
CreateByteField(CMBF, 5, CMDA)
CreateByteField(CMBF, 12, CMDB)
CreateByteField(CMBF, 19, CMDC)
Store(0xA0, CMDA)
Store(0xA0, CMDB)
Store(0xA0, CMDC)
Or(PPMM, 0x08, POMD)
If(And(PDCR, 0x01)) {
Or(PDMM, 0x40, DMMD)
}
Else {
Store(Match
(MDTT, MLE, GTTM(PMTM),
MTR, 0, 0), Local0)
If(LLess(Local0, 3)) {
Or(0x20, Local0, DMMD)
}
}
Return(CMBF)
}
} /* End Device(MST) */
Device(SLAV)
{
Name(_ADR, 1)
Method(_GTF) {
Name(CMBF, Buffer(21) {
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
})
CreateByteField(CMBF, 1, POMD)
CreateByteField(CMBF, 8, DMMD)
CreateByteField(CMBF, 5, CMDA)
CreateByteField(CMBF, 12, CMDB)
CreateByteField(CMBF, 19, CMDC)
Store(0xB0, CMDA)
Store(0xB0, CMDB)
Store(0xB0, CMDC)
Or(PPSM, 0x08, POMD)
If(And(PDCR, 0x02)) {
Or(PDSM, 0x40, DMMD)
}
Else {
Store(Match
(MDTT, MLE, GTTM(PMTS),
MTR, 0, 0), Local0)
If(LLess(Local0, 3)) {
Or(0x20, Local0, DMMD)
}
}
Return(CMBF)
}
} /* End Device(SLAV) */
}

307
src/mainboard/asrock/939a785gmh/acpi/routing.asl Normal file
View File

@ -0,0 +1,307 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
)
{
#include "routing.asl"
}
*/
/* Routing is in System Bus scope */
Scope(\_SB) {
Name(PR0, Package(){
/* NB devices */
/* Bus 0, Dev 0 - RS780 Host Controller */
/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
/* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
Package(){0x0002FFFF, 0, INTC, 0 },
Package(){0x0002FFFF, 1, INTD, 0 },
Package(){0x0002FFFF, 2, INTA, 0 },
Package(){0x0002FFFF, 3, INTB, 0 },
/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
Package(){0x0004FFFF, 0, INTA, 0 },
Package(){0x0004FFFF, 1, INTB, 0 },
Package(){0x0004FFFF, 2, INTC, 0 },
Package(){0x0004FFFF, 3, INTD, 0 },
/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
/* Package(){0x0005FFFF, 0, INTB, 0 }, */
/* Package(){0x0005FFFF, 1, INTC, 0 }, */
/* Package(){0x0005FFFF, 2, INTD, 0 }, */
/* Package(){0x0005FFFF, 3, INTA, 0 }, */
/* Bus 0, Dev 6 - PCIe Bridge for Ethernet Chip */
Package(){0x0006FFFF, 0, INTC, 0 },
Package(){0x0006FFFF, 1, INTD, 0 },
Package(){0x0006FFFF, 2, INTA, 0 },
Package(){0x0006FFFF, 3, INTB, 0 },
/* Bus 0, Dev 7 - PCIe Bridge for x1 PCIe Slot */
Package(){0x0007FFFF, 0, INTD, 0 },
Package(){0x0007FFFF, 1, INTA, 0 },
Package(){0x0007FFFF, 2, INTB, 0 },
Package(){0x0007FFFF, 3, INTC, 0 },
/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
/* SB devices */
/* Bus 0, Dev 17 - SATA controller #2 */
/* Bus 0, Dev 18 - SATA controller #1 */
Package(){0x0011FFFF, 0, INTA, 0 },
/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
* EHCI, dev 18, 19 func 2 */
Package(){0x0012FFFF, 0, INTA, 0 },
Package(){0x0012FFFF, 1, INTB, 0 },
Package(){0x0012FFFF, 2, INTC, 0 },
Package(){0x0013FFFF, 0, INTC, 0 },
Package(){0x0013FFFF, 1, INTD, 0 },
Package(){0x0013FFFF, 2, INTA, 0 },
/* Package(){0x0014FFFF, 1, INTA, 0 }, */
/* Bus 0, Dev 20 - F0:SMBus/ACPI,F1:IDE;F2:HDAudio;F3:LPC;F4:PCIBridge;F5:USB */
Package(){0x0014FFFF, 0, INTA, 0 },
Package(){0x0014FFFF, 1, INTB, 0 },
Package(){0x0014FFFF, 2, INTC, 0 },
Package(){0x0014FFFF, 3, INTD, 0 },
})
Name(APR0, Package(){
/* NB devices in APIC mode */
/* Bus 0, Dev 0 - RS780 Host Controller */
/* Bus 0, Dev 1 - PCI Bridge for Internal Graphics */
/* Package(){0x0001FFFF, 0, 0, 18 }, */
/* package(){0x0001FFFF, 1, 0, 19 }, */
/* Bus 0, Dev 2 - PCIe Bridge for x8 PCIe Slot (GFX0) */
Package(){0x0002FFFF, 0, 0, 18 },
/* Package(){0x0002FFFF, 1, 0, 19 }, */
/* Package(){0x0002FFFF, 2, 0, 16 }, */
/* Package(){0x0002FFFF, 3, 0, 17 }, */
/* Bus 0, Dev 3 - PCIe graphics port 1 bridge */
Package(){0x0003FFFF, 0, 0, 19 },
/* Bus 0, Dev 4 - PCIe Bridge for Express Card Slot */
Package(){0x0004FFFF, 0, 0, 16 },
/* Package(){0x0004FFFF, 1, 0, 17 }, */
/* Package(){0x0004FFFF, 2, 0, 18 }, */
/* Package(){0x0004FFFF, 3, 0, 19 }, */
/* Bus 0, Dev 5 - General purpose PCIe bridge 5 */
/* Package(){0x0005FFFF, 0, 0, 17 }, */
/* Package(){0x0005FFFF, 1, 0, 18 }, */
/* Package(){0x0005FFFF, 2, 0, 19 }, */
/* Package(){0x0005FFFF, 3, 0, 16 }, */
/* Bus 0, Dev 6 - General purpose PCIe bridge 6 */
/* Package(){0x0006FFFF, 0, 0, 18 }, */
/* Package(){0x0006FFFF, 1, 0, 19 }, */
/* Package(){0x0006FFFF, 2, 0, 16 }, */
/* Package(){0x0006FFFF, 3, 0, 17 }, */
/* Bus 0, Dev 7 - PCIe Bridge for network card */
/* Package(){0x0007FFFF, 0, 0, 19 }, */
/* Package(){0x0007FFFF, 1, 0, 16 }, */
/* Package(){0x0007FFFF, 2, 0, 17 }, */
/* Package(){0x0007FFFF, 3, 0, 18 }, */
/* Bus 0, Dev 9 - PCIe Bridge for network card */
Package(){0x0009FFFF, 0, 0, 17 },
/* Package(){0x0009FFFF, 1, 0, 16 }, */
/* Package(){0x0009FFFF, 2, 0, 17 }, */
/* Package(){0x0009FFFF, 3, 0, 18 }, */
/* Bus 0, Dev A - PCIe Bridge for network card */
Package(){0x000AFFFF, 0, 0, 18 },
/* Package(){0x000AFFFF, 1, 0, 16 }, */
/* Package(){0x000AFFFF, 2, 0, 17 }, */
/* Package(){0x000AFFFF, 3, 0, 18 }, */
/* Bus 0, Funct 8 - Southbridge port (normally hidden) */
/* SB devices in APIC mode */
/* Bus 0, Dev 17 - SATA controller #2 */
/* Bus 0, Dev 18 - SATA controller #1 */
Package(){0x0011FFFF, 0, 0, 22 },
/* Bus 0, Dev 19 - USB: OHCI, dev 18,19 func 0-2, dev 20 func 5;
* EHCI, dev 18, 19 func 2 */
Package(){0x0012FFFF, 0, 0, 16 },
Package(){0x0012FFFF, 1, 0, 17 },
Package(){0x0012FFFF, 2, 0, 18 },
Package(){0x0013FFFF, 0, 0, 18 },
Package(){0x0013FFFF, 1, 0, 19 },
Package(){0x0013FFFF, 2, 0, 16 },
/* Package(){0x00140000, 0, 0, 16 }, */
/* Package(){0x00130004, 2, 0, 18 }, */
/* Package(){0x00130005, 3, 0, 19 }, */
/* Bus 0, Dev 20 - F0:SMBus/ACPI, F1:IDE; F2:HDAudio; F3:LPC; F4:PCIBridge; F5:USB */
Package(){0x0014FFFF, 0, 0, 16 },
Package(){0x0014FFFF, 1, 0, 17 },
Package(){0x0014FFFF, 2, 0, 18 },
Package(){0x0014FFFF, 3, 0, 19 },
/* Package(){0x00140004, 2, 0, 18 }, */
/* Package(){0x00140004, 3, 0, 19 }, */
/* Package(){0x00140005, 1, 0, 17 }, */
/* Package(){0x00140006, 1, 0, 17 }, */
})
Name(PR1, Package(){
/* Internal graphics - RS780 VGA, Bus1, Dev5 */
Package(){0x0005FFFF, 0, INTA, 0 },
Package(){0x0005FFFF, 1, INTB, 0 },
Package(){0x0005FFFF, 2, INTC, 0 },
Package(){0x0005FFFF, 3, INTD, 0 },
})
Name(APR1, Package(){
/* Internal graphics - RS780 VGA, Bus1, Dev5 */
Package(){0x0005FFFF, 0, 0, 18 },
Package(){0x0005FFFF, 1, 0, 19 },
/* Package(){0x0005FFFF, 2, 0, 20 }, */
/* Package(){0x0005FFFF, 3, 0, 17 }, */
})
Name(PS2, Package(){
/* The external GFX - Hooked to PCIe slot 2 */
Package(){0x0000FFFF, 0, INTC, 0 },
Package(){0x0000FFFF, 1, INTD, 0 },
Package(){0x0000FFFF, 2, INTA, 0 },
Package(){0x0000FFFF, 3, INTB, 0 },
})
Name(APS2, Package(){
/* The external GFX - Hooked to PCIe slot 2 */
Package(){0x0000FFFF, 0, 0, 18 },
Package(){0x0000FFFF, 1, 0, 19 },
Package(){0x0000FFFF, 2, 0, 16 },
Package(){0x0000FFFF, 3, 0, 17 },
})
Name(PS4, Package(){
/* PCIe slot - Hooked to PCIe slot 4 */
Package(){0x0000FFFF, 0, INTA, 0 },
Package(){0x0000FFFF, 1, INTB, 0 },
Package(){0x0000FFFF, 2, INTC, 0 },
Package(){0x0000FFFF, 3, INTD, 0 },
})
Name(APS4, Package(){
/* PCIe slot - Hooked to PCIe slot 4 */
Package(){0x0000FFFF, 0, 0, 16 },
Package(){0x0000FFFF, 1, 0, 17 },
Package(){0x0000FFFF, 2, 0, 18 },
Package(){0x0000FFFF, 3, 0, 19 },
})
Name(PS5, Package(){
/* PCIe slot - Hooked to PCIe slot 5 */
Package(){0x0000FFFF, 0, INTB, 0 },
Package(){0x0000FFFF, 1, INTC, 0 },
Package(){0x0000FFFF, 2, INTD, 0 },
Package(){0x0000FFFF, 3, INTA, 0 },
})
Name(APS5, Package(){
/* PCIe slot - Hooked to PCIe slot 5 */
Package(){0x0000FFFF, 0, 0, 17 },
Package(){0x0000FFFF, 1, 0, 18 },
Package(){0x0000FFFF, 2, 0, 19 },
Package(){0x0000FFFF, 3, 0, 16 },
})
Name(PS6, Package(){
/* PCIe slot - Hooked to PCIe slot 6 */
Package(){0x0000FFFF, 0, INTC, 0 },
Package(){0x0000FFFF, 1, INTD, 0 },
Package(){0x0000FFFF, 2, INTA, 0 },
Package(){0x0000FFFF, 3, INTB, 0 },
})
Name(APS6, Package(){
/* PCIe slot - Hooked to PCIe slot 6 */
Package(){0x0000FFFF, 0, 0, 18 },
Package(){0x0000FFFF, 1, 0, 19 },
Package(){0x0000FFFF, 2, 0, 16 },
Package(){0x0000FFFF, 3, 0, 17 },
})
Name(PS7, Package(){
/* The onboard Ethernet chip - Hooked to PCIe slot 7 */
Package(){0x0000FFFF, 0, INTD, 0 },
Package(){0x0000FFFF, 1, INTA, 0 },
Package(){0x0000FFFF, 2, INTB, 0 },
Package(){0x0000FFFF, 3, INTC, 0 },
})
Name(APS7, Package(){
/* The onboard Ethernet chip - Hooked to PCIe slot 7 */
Package(){0x0000FFFF, 0, 0, 19 },
Package(){0x0000FFFF, 1, 0, 16 },
Package(){0x0000FFFF, 2, 0, 17 },
Package(){0x0000FFFF, 3, 0, 18 },
})
Name(PS9, Package(){
/* PCIe slot - Hooked to PCIe slot 9 */
Package(){0x0000FFFF, 0, INTD, 0 },
Package(){0x0000FFFF, 1, INTA, 0 },
Package(){0x0000FFFF, 2, INTB, 0 },
Package(){0x0000FFFF, 3, INTC, 0 },
})
Name(APS9, Package(){
/* PCIe slot - Hooked to PCIe slot 9 */
Package(){0x0000FFFF, 0, 0, 17 },
Package(){0x0000FFFF, 1, 0, 18 },
Package(){0x0000FFFF, 2, 0, 19 },
Package(){0x0000FFFF, 3, 0, 16 },
})
Name(PSa, Package(){
/* PCIe slot - Hooked to PCIe slot 10 */
Package(){0x0000FFFF, 0, INTD, 0 },
Package(){0x0000FFFF, 1, INTA, 0 },
Package(){0x0000FFFF, 2, INTB, 0 },
Package(){0x0000FFFF, 3, INTC, 0 },
})
Name(APSa, Package(){
/* PCIe slot - Hooked to PCIe slot 10 */
Package(){0x0000FFFF, 0, 0, 18 },
Package(){0x0000FFFF, 1, 0, 19 },
Package(){0x0000FFFF, 2, 0, 16 },
Package(){0x0000FFFF, 3, 0, 17 },
})
Name(PCIB, Package(){
/* PCI slots: slot 0, slot 1, behind Dev14, Fun4. */
Package(){0x0005FFFF, 0, 0, 0x14 },
Package(){0x0005FFFF, 1, 0, 0x15 },
Package(){0x0005FFFF, 2, 0, 0x16 },
Package(){0x0005FFFF, 3, 0, 0x17 },
Package(){0x0006FFFF, 0, 0, 0x15 },
Package(){0x0006FFFF, 1, 0, 0x16 },
Package(){0x0006FFFF, 2, 0, 0x17 },
Package(){0x0006FFFF, 3, 0, 0x14 },
})
}

149
src/mainboard/asrock/939a785gmh/acpi/sata.asl Normal file
View File

@ -0,0 +1,149 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* simple name description */
/*
Scope (_SB) {
Device(PCI0) {
Device(SATA) {
Name(_ADR, 0x00120000)
#include "sata.asl"
}
}
}
*/
Name(STTM, Buffer(20) {
0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
0x78, 0x00, 0x00, 0x00, 0x0f, 0x00, 0x00, 0x00,
0x1f, 0x00, 0x00, 0x00
})
/* Start by clearing the PhyRdyChg bits */
Method(_INI) {
\_GPE._L1F()
}
Device(PMRY)
{
Name(_ADR, 0)
Method(_GTM, 0x0, NotSerialized) {
Return(STTM)
}
Method(_STM, 0x3, NotSerialized) {}
Device(PMST) {
Name(_ADR, 0)
Method(_STA,0) {
if (LGreater(P0IS,0)) {
return (0x0F) /* sata is visible */
}
else {
return (0x00) /* sata is missing */
}
}
}/* end of PMST */
Device(PSLA)
{
Name(_ADR, 1)
Method(_STA,0) {
if (LGreater(P1IS,0)) {
return (0x0F) /* sata is visible */
}
else {
return (0x00) /* sata is missing */
}
}
} /* end of PSLA */
} /* end of PMRY */
Device(SEDY)
{
Name(_ADR, 1) /* IDE Scondary Channel */
Method(_GTM, 0x0, NotSerialized) {
Return(STTM)
}
Method(_STM, 0x3, NotSerialized) {}
Device(SMST)
{
Name(_ADR, 0)
Method(_STA,0) {
if (LGreater(P2IS,0)) {
return (0x0F) /* sata is visible */
}
else {
return (0x00) /* sata is missing */
}
}
} /* end of SMST */
Device(SSLA)
{
Name(_ADR, 1)
Method(_STA,0) {
if (LGreater(P3IS,0)) {
return (0x0F) /* sata is visible */
}
else {
return (0x00) /* sata is missing */
}
}
} /* end of SSLA */
} /* end of SEDY */
/* SATA Hot Plug Support */
Scope(\_GPE) {
Method(_L1F,0x0,NotSerialized) {
if (\_SB.P0PR) {
if (LGreater(\_SB.P0IS,0)) {
sleep(32)
}
Notify(\_SB.PCI0.STCR.PMRY.PMST, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P0PR)
}
if (\_SB.P1PR) {
if (LGreater(\_SB.P1IS,0)) {
sleep(32)
}
Notify(\_SB.PCI0.STCR.PMRY.PSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P1PR)
}
if (\_SB.P2PR) {
if (LGreater(\_SB.P2IS,0)) {
sleep(32)
}
Notify(\_SB.PCI0.STCR.SEDY.SMST, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P2PR)
}
if (\_SB.P3PR) {
if (LGreater(\_SB.P3IS,0)) {
sleep(32)
}
Notify(\_SB.PCI0.STCR.SEDY.SSLA, 0x01) /* NOTIFY_DEVICE_CHECK */
store(one, \_SB.P3PR)
}
}
}

93
src/mainboard/asrock/939a785gmh/acpi/statdef.asl Normal file
View File

@ -0,0 +1,93 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Status and notification definitions */
#define STA_MISSING 0x00
#define STA_PRESENT 0x01
#define STA_ENABLED 0x03
#define STA_DISABLED 0x09
#define STA_INVISIBLE 0x0B
#define STA_UNAVAILABLE 0x0D
#define STA_VISIBLE 0x0F
/* SMBus status codes */
#define SMB_OK 0x00
#define SMB_UnknownFail 0x07
#define SMB_DevAddrNAK 0x10
#define SMB_DeviceError 0x11
#define SMB_DevCmdDenied 0x12
#define SMB_UnknownErr 0x13
#define SMB_DevAccDenied 0x17
#define SMB_Timeout 0x18
#define SMB_HstUnsuppProtocol 0x19
#define SMB_Busy 0x1A
#define SMB_PktChkError 0x1F
/* Device Object Notification Values */
#define NOTIFY_BUS_CHECK 0x00
#define NOTIFY_DEVICE_CHECK 0x01
#define NOTIFY_DEVICE_WAKE 0x02
#define NOTIFY_EJECT_REQUEST 0x03
#define NOTIFY_DEVICE_CHECK_JR 0x04
#define NOTIFY_FREQUENCY_ERROR 0x05
#define NOTIFY_BUS_MODE 0x06
#define NOTIFY_POWER_FAULT 0x07
#define NOTIFY_CAPABILITIES 0x08
#define NOTIFY_PLD_CHECK 0x09
#define NOTIFY_SLIT_UPDATE 0x0B
/* Battery Device Notification Values */
#define NOTIFY_BAT_STATUSCHG 0x80
#define NOTIFY_BAT_INFOCHG 0x81
#define NOTIFY_BAT_MAINTDATA 0x82
/* Power Source Object Notification Values */
#define NOTIFY_PWR_STATUSCHG 0x80
/* Thermal Zone Object Notification Values */
#define NOTIFY_TZ_STATUSCHG 0x80
#define NOTIFY_TZ_TRIPPTCHG 0x81
#define NOTIFY_TZ_DEVLISTCHG 0x82
#define NOTIFY_TZ_RELTBLCHG 0x83
/* Power Button Notification Values */
#define NOTIFY_POWER_BUTTON 0x80
/* Sleep Button Notification Values */
#define NOTIFY_SLEEP_BUTTON 0x80
/* Lid Notification Values */
#define NOTIFY_LID_STATUSCHG 0x80
/* Processor Device Notification Values */
#define NOTIFY_CPU_PPCCHG 0x80
#define NOTIFY_CPU_CSTATECHG 0x81
#define NOTIFY_CPU_THROTLCHG 0x82
/* User Presence Device Notification Values */
#define NOTIFY_USR_PRESNCECHG 0x80
/* Battery Device Notification Values */
#define NOTIFY_ALS_ILLUMCHG 0x80
#define NOTIFY_ALS_COLORTMPCHG 0x81
#define NOTIFY_ALS_RESPCHG 0x82

161
src/mainboard/asrock/939a785gmh/acpi/usb.asl Normal file
View File

@ -0,0 +1,161 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* simple name description */
/*
DefinitionBlock ("DSDT.AML","DSDT",0x01,"XXXXXX","XXXXXXXX",0x00010001
)
{
#include "usb.asl"
}
*/
Method(UCOC, 0) {
Sleep(20)
Store(0x13,CMTI)
Store(0,GPSL)
}
/* USB Port 0 overcurrent uses Gpm 0 */
If(LLessEqual(UOM0,9)) {
Scope (\_GPE) {
Method (_L13) {
UCOC()
if(LEqual(GPB0,PLC0)) {
Not(PLC0,PLC0)
Store(PLC0, \_SB.PT0D)
}
}
}
}
/* USB Port 1 overcurrent uses Gpm 1 */
If (LLessEqual(UOM1,9)) {
Scope (\_GPE) {
Method (_L14) {
UCOC()
if (LEqual(GPB1,PLC1)) {
Not(PLC1,PLC1)
Store(PLC1, \_SB.PT1D)
}
}
}
}
/* USB Port 2 overcurrent uses Gpm 2 */
If (LLessEqual(UOM2,9)) {
Scope (\_GPE) {
Method (_L15) {
UCOC()
if (LEqual(GPB2,PLC2)) {
Not(PLC2,PLC2)
Store(PLC2, \_SB.PT2D)
}
}
}
}
/* USB Port 3 overcurrent uses Gpm 3 */
If (LLessEqual(UOM3,9)) {
Scope (\_GPE) {
Method (_L16) {
UCOC()
if (LEqual(GPB3,PLC3)) {
Not(PLC3,PLC3)
Store(PLC3, \_SB.PT3D)
}
}
}
}
/* USB Port 4 overcurrent uses Gpm 4 */
If (LLessEqual(UOM4,9)) {
Scope (\_GPE) {
Method (_L19) {
UCOC()
if (LEqual(GPB4,PLC4)) {
Not(PLC4,PLC4)
Store(PLC4, \_SB.PT4D)
}
}
}
}
/* USB Port 5 overcurrent uses Gpm 5 */
If (LLessEqual(UOM5,9)) {
Scope (\_GPE) {
Method (_L1A) {
UCOC()
if (LEqual(GPB5,PLC5)) {
Not(PLC5,PLC5)
Store(PLC5, \_SB.PT5D)
}
}
}
}
/* USB Port 6 overcurrent uses Gpm 6 */
If (LLessEqual(UOM6,9)) {
Scope (\_GPE) {
/* Method (_L1C) { */
Method (_L06) {
UCOC()
if (LEqual(GPB6,PLC6)) {
Not(PLC6,PLC6)
Store(PLC6, \_SB.PT6D)
}
}
}
}
/* USB Port 7 overcurrent uses Gpm 7 */
If (LLessEqual(UOM7,9)) {
Scope (\_GPE) {
/* Method (_L1D) { */
Method (_L07) {
UCOC()
if (LEqual(GPB7,PLC7)) {
Not(PLC7,PLC7)
Store(PLC7, \_SB.PT7D)
}
}
}
}
/* USB Port 8 overcurrent uses Gpm 8 */
If (LLessEqual(UOM8,9)) {
Scope (\_GPE) {
Method (_L17) {
if (LEqual(G8IS,PLC8)) {
Not(PLC8,PLC8)
Store(PLC8, \_SB.PT8D)
}
}
}
}
/* USB Port 9 overcurrent uses Gpm 9 */
If (LLessEqual(UOM9,9)) {
Scope (\_GPE) {
Method (_L0E) {
if (LEqual(G9IS,0)) {
Store(1,\_SB.PT9D)
}
}
}
}

274
src/mainboard/asrock/939a785gmh/acpi_tables.c Normal file
View File

@ -0,0 +1,274 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <string.h>
#include <arch/acpi.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <cpu/amd/amdk8_sysconf.h>
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
#include <arch/cpu.h>
#include <cpu/amd/model_fxx_powernow.h>
extern u16 pm_base;
#define DUMP_ACPI_TABLES 0
/*
* Assume the max pstate number is 8
* 0x21(33 bytes) is one package length of _PSS package
*/
#define Maxpstate 8
#define Defpkglength 0x21
#if DUMP_ACPI_TABLES == 1
static void dump_mem(u32 start, u32 end)
{
u32 i;
print_debug("dump_mem:");
for (i = start; i < end; i++) {
if ((i & 0xf) == 0) {
printk(BIOS_DEBUG, "\n%08x:", i);
}
printk(BIOS_DEBUG, " %02x", (u8)*((u8 *)i));
}
print_debug("\n");
}
#endif
extern const acpi_header_t AmlCode;
#if CONFIG_ACPI_SSDTX_NUM >= 1
extern const acpi_header_t AmlCode_ssdt2;
extern const acpi_header_t AmlCode_ssdt3;
extern const acpi_header_t AmlCode_ssdt4;
extern const acpi_header_t AmlCode_ssdt5;
#endif
#define IO_APIC_ADDR 0xfec00000UL
unsigned long acpi_fill_mcfg(unsigned long current)
{
/* Just a dummy */
return current;
}
unsigned long acpi_fill_madt(unsigned long current)
{
/* create all subtables for processors */
current = acpi_create_madt_lapics(current);
/* Write SB700 IOAPIC, only one */
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, 2,
IO_APIC_ADDR, 0);
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 0, 2, 0);
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
current, 0, 9, 9, 0xF);
/* 0: mean bus 0--->ISA */
/* 0: PIC 0 */
/* 2: APIC 2 */
/* 5 mean: 0101 --> Edige-triggered, Active high */
/* create all subtables for processors */
/* current = acpi_create_madt_lapic_nmis(current, 5, 1); */
/* 1: LINT1 connect to NMI */
return current;
}
extern void get_bus_conf(void);
#if CONFIG_ACPI_SSDTX_NUM >= 1
static void update_ssdtx(void *ssdtx, int i)
{
u8 *PCI;
u8 *HCIN;
u8 *UID;
PCI = ssdtx + 0x32;
HCIN = ssdtx + 0x39;
UID = ssdtx + 0x40;
if (i < 7) {
*PCI = (u8) ('4' + i - 1);
} else {
*PCI = (u8) ('A' + i - 1 - 6);
}
*HCIN = (u8) i;
*UID = (u8) (i + 3);
/* FIXME: need to update the GSI id in the ssdtx too */
}
#endif
unsigned long acpi_fill_ssdt_generator(unsigned long current, const char *oem_table_id) {
k8acpi_write_vars();
amd_model_fxx_generate_powernow(pm_base + 8, 6, 1);
return (unsigned long) (acpigen_get_current());
}
unsigned long write_acpi_tables(unsigned long start)
{
unsigned long current;
acpi_rsdp_t *rsdp;
acpi_rsdt_t *rsdt;
acpi_hpet_t *hpet;
acpi_madt_t *madt;
acpi_fadt_t *fadt;
acpi_facs_t *facs;
acpi_header_t *dsdt;
acpi_header_t *ssdt;
#if CONFIG_ACPI_SSDTX_NUM >= 1
acpi_header_t *ssdtx;
acpi_header_t const *p;
int i;
#endif
get_bus_conf(); /* it will get sblk, pci1234, hcdn, and sbdn */
/* Align ACPI tables to 16 bytes */
start = (start + 0x0f) & -0x10;
current = start;
printk(BIOS_INFO, "ACPI: Writing ACPI tables at %lx...\n", start);
/* We need at least an RSDP and an RSDT Table */
rsdp = (acpi_rsdp_t *) current;
current += sizeof(acpi_rsdp_t);
rsdt = (acpi_rsdt_t *) current;
current += sizeof(acpi_rsdt_t);
/* clear all table memory */
memset((void *)start, 0, current - start);
acpi_write_rsdp(rsdp, rsdt, NULL);
acpi_write_rsdt(rsdt);
/*
* We explicitly add these tables later on:
*/
/* If we want to use HPET Timers Linux wants an MADT */
printk(BIOS_DEBUG, "ACPI: * HPET\n");
hpet = (acpi_hpet_t *) current;
current += sizeof(acpi_hpet_t);
acpi_create_hpet(hpet);
acpi_add_table(rsdp, hpet);
printk(BIOS_DEBUG, "ACPI: * MADT\n");
madt = (acpi_madt_t *) current;
acpi_create_madt(madt);
current += madt->header.length;
acpi_add_table(rsdp, madt);
/* SSDT */
printk(BIOS_DEBUG, "ACPI: * SSDT\n");
ssdt = (acpi_header_t *)current;
acpi_create_ssdt_generator(ssdt, "DYNADATA");
current += ssdt->length;
acpi_add_table(rsdp, ssdt);
#if CONFIG_ACPI_SSDTX_NUM >= 1
/* same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table */
for (i = 1; i < sysconf.hc_possible_num; i++) { /* 0: is hc sblink */
if ((sysconf.pci1234[i] & 1) != 1)
continue;
u8 c;
if (i < 7) {
c = (u8) ('4' + i - 1);
} else {
c = (u8) ('A' + i - 1 - 6);
}
printk(BIOS_DEBUG, "ACPI: * SSDT for PCI%c Aka hcid = %d\n", c, sysconf.hcid[i]); /* pci0 and pci1 are in dsdt */
current = (current + 0x07) & -0x08;
ssdtx = (acpi_header_t *) current;
switch (sysconf.hcid[i]) {
case 1: /* 8132 */
p = &AmlCode_ssdt2;
break;
case 2: /* 8151 */
p = &AmlCode_ssdt3;
break;
case 3: /* 8131 */
p = &AmlCode_ssdt4;
break;
default:
/* HTX no io apic */
p = &AmlCode_ssdt5;
break;
}
current += p->length;
memcpy((void *)ssdtx, p, p->length);
update_ssdtx((void *)ssdtx, i);
ssdtx->checksum = 0;
ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
acpi_add_table(rsdp, ssdtx);
}
#endif
/* FACS */
printk(BIOS_DEBUG, "ACPI: * FACS\n");
facs = (acpi_facs_t *) current;
current += sizeof(acpi_facs_t);
acpi_create_facs(facs);
/* DSDT */
printk(BIOS_DEBUG, "ACPI: * DSDT\n");
dsdt = (acpi_header_t *) current;
memcpy((void *)dsdt, &AmlCode, AmlCode.length);
current += dsdt->length;
printk(BIOS_DEBUG, "ACPI: * DSDT @ %p Length %x\n", dsdt, dsdt->length);
/* FADT */
printk(BIOS_DEBUG, "ACPI: * FADT\n");
fadt = (acpi_fadt_t *) current;
current += sizeof(acpi_fadt_t);
acpi_create_fadt(fadt, facs, dsdt);
acpi_add_table(rsdp, fadt);
#if DUMP_ACPI_TABLES == 1
printk(BIOS_DEBUG, "rsdp\n");
dump_mem(rsdp, ((void *)rsdp) + sizeof(acpi_rsdp_t));
printk(BIOS_DEBUG, "rsdt\n");
dump_mem(rsdt, ((void *)rsdt) + sizeof(acpi_rsdt_t));
printk(BIOS_DEBUG, "madt\n");
dump_mem(madt, ((void *)madt) + madt->header.length);
printk(BIOS_DEBUG, "ssdt\n");
dump_mem(ssdt, ((void *)ssdt) + ssdt->length);
printk(BIOS_DEBUG, "fadt\n");
dump_mem(fadt, ((void *)fadt) + fadt->header.length);
#endif
printk(BIOS_INFO, "ACPI: done.\n");
return current;
}

26
src/mainboard/asrock/939a785gmh/chip.h Normal file
View File

@ -0,0 +1,26 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
extern struct chip_operations mainboard_ops;
struct mainboard_config
{
u32 uma_size; /* How many UMA should be used in memory for TOP. */
};

119
src/mainboard/asrock/939a785gmh/cmos.layout Normal file
View File

@ -0,0 +1,119 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2010 Advanced Micro Devices, Inc.
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
##
##
entries
#start-bit length config config-ID name
#0 8 r 0 seconds
#8 8 r 0 alarm_seconds
#16 8 r 0 minutes
#24 8 r 0 alarm_minutes
#32 8 r 0 hours
#40 8 r 0 alarm_hours
#48 8 r 0 day_of_week
#56 8 r 0 day_of_month
#64 8 r 0 month
#72 8 r 0 year
#80 4 r 0 rate_select
#84 3 r 0 REF_Clock
#87 1 r 0 UIP
#88 1 r 0 auto_switch_DST
#89 1 r 0 24_hour_mode
#90 1 r 0 binary_values_enable
#91 1 r 0 square-wave_out_enable
#92 1 r 0 update_finished_enable
#93 1 r 0 alarm_interrupt_enable
#94 1 r 0 periodic_interrupt_enable
#95 1 r 0 disable_clock_updates
#96 288 r 0 temporary_filler
0 384 r 0 reserved_memory
384 1 e 4 boot_option
385 1 e 4 last_boot
386 1 e 1 ECC_memory
388 4 r 0 reboot_bits
392 3 e 5 baud_rate
395 1 e 1 hw_scrubber
396 1 e 1 interleave_chip_selects
397 2 e 8 max_mem_clock
399 1 e 2 dual_core
400 1 e 1 power_on_after_fail
412 4 e 6 debug_level
416 4 e 7 boot_first
420 4 e 7 boot_second
424 4 e 7 boot_third
428 4 h 0 boot_index
432 8 h 0 boot_countdown
440 4 e 9 slow_cpu
444 1 e 1 nmi
445 1 e 1 iommu
728 256 h 0 user_data
984 16 h 0 check_sum
# Reserve the extended AMD configuration registers
1000 24 r 0 reserved_memory
enumerations
#ID value text
1 0 Disable
1 1 Enable
2 0 Enable
2 1 Disable
4 0 Fallback
4 1 Normal
5 0 115200
5 1 57600
5 2 38400
5 3 19200
5 4 9600
5 5 4800
5 6 2400
5 7 1200
6 6 Notice
6 7 Info
6 8 Debug
6 9 Spew
7 0 Network
7 1 HDD
7 2 Floppy
7 8 Fallback_Network
7 9 Fallback_HDD
7 10 Fallback_Floppy
#7 3 ROM
8 0 DDR400
8 1 DDR333
8 2 DDR266
8 3 DDR200
9 0 off
9 1 87.5%
9 2 75.0%
9 3 62.5%
9 4 50.0%
9 5 37.5%
9 6 25.0%
9 7 12.5%
checksums
checksum 392 983 984

133
src/mainboard/asrock/939a785gmh/devicetree.cb Normal file
View File

@ -0,0 +1,133 @@
#Define gpp_configuration, A=0, B=1, C=2, D=3, E=4(default)
#Define port_enable, (bit map): GFX(2,3), GPP(4,5,6,7)
#Define gfx_dev2_dev3, 0: a link will never be established on Dev2 or Dev3,
# 1: the system allows a PCIE link to be established on Dev2 or Dev3.
#Define gfx_dual_slot, 0: single slot, 1: dual slot
#Define gfx_lane_reversal, 0: disable lane reversal, 1: enable
#Define gfx_tmds, 0: didn't support TMDS, 1: support
#Define gfx_compliance, 0: didn't support compliance, 1: support
#Define gfx_reconfiguration, 0: short reconfiguration, 1(default): long reconfiguration
#Define gfx_link_width, 0: x16, 1: x1, 2: x2, 3: x4, 4: x8, 5: x12 (not supported), 6: x16
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_939
device apic 0 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on # southbridge
chip southbridge/amd/rs780
device pci 0.0 on end # HT 0x9600
device pci 1.0 on end # Internal Graphics P2P bridge 0x9602
device pci 2.0 on end # PCIE P2P bridge (external graphics) 0x9603
device pci 3.0 on end # PCIE P2P bridge 0x960b
device pci 4.0 on end # PCIE P2P bridge 0x9604
device pci 5.0 off end # PCIE P2P bridge 0x9605
device pci 6.0 off end # PCIE P2P bridge 0x9606
device pci 7.0 off end # PCIE P2P bridge 0x9607
device pci 8.0 off end # NB/SB Link P2P bridge
device pci 9.0 on end #
device pci a.0 on end #
register "gppsb_configuration" = "1" # Configuration B
register "gpp_configuration" = "3" # Configuration D default
register "port_enable" = "0x6fc"
register "gfx_dev2_dev3" = "1"
register "gfx_dual_slot" = "1"
register "gfx_lane_reversal" = "0"
register "gfx_tmds" = "0"
register "gfx_compliance" = "0"
register "gfx_reconfiguration" = "1"
register "gfx_link_width" = "0"
end
chip southbridge/amd/sb700 # it is under NB/SB Link, but on the same pri bus
device pci 11.0 on end # SATA
device pci 12.0 on end # USB
device pci 12.1 on end # USB
device pci 12.2 on end # USB
device pci 13.0 on end # USB
device pci 13.1 on end # USB
device pci 13.2 on end # USB
device pci 14.0 on # SM
chip drivers/generic/generic #dimm 0-0-0
device i2c 50 on end
end
chip drivers/generic/generic #dimm 0-0-1
device i2c 51 on end
end
chip drivers/generic/generic #dimm 0-1-0
device i2c 52 on end
end
chip drivers/generic/generic #dimm 0-1-1
device i2c 53 on end
end
end # SM
device pci 14.1 on end # IDE 0x439c
device pci 14.2 on end # HDA 0x4383
device pci 14.3 on # LPC 0x439d
chip superio/winbond/w83627dhg
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 on # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
end
#device pnp 2e.6 off # SPI
#end
device pnp 2e.307 off # GPIO6
end
device pnp 2e.8 on # WDTO#, PLED
end
device pnp 2e.009 on # GPIO2
end
device pnp 2e.109 on # GPIO3
end
device pnp 2e.209 on # GPIO4
end
device pnp 2e.309 off # GPIO5
end
device pnp 2e.a off # ACPI
end
device pnp 2e.b on # HWM
io 0x60 = 0x290
end
device pnp 2e.c off # PECI, SST
end
end #superio/winbond/w8362
end #LPC
device pci 14.4 on end # PCI 0x4384
device pci 14.5 on end # USB 2
register "ide0_enable" = "1"
register "sata0_enable" = "1"
register "boot_switch_sata_ide" = "0" # 0: boot from SATA. 1: IDE
register "hda_viddid" = "0x10ec0882"
end #southbridge/amd/sb700
end # device pci 18.0
device pci 18.0 on end
device pci 18.0 on end
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
end #northbridge/amd/amdk8
end #pci_domain
end #northbridge/amd/amdk8/root_complex

1807
src/mainboard/asrock/939a785gmh/dsdt.asl Normal file
View File

File diff suppressed because it is too large Load Diff

201
src/mainboard/asrock/939a785gmh/fadt.c Normal file
View File

@ -0,0 +1,201 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/*
* ACPI - create the Fixed ACPI Description Tables (FADT)
*/
#include <string.h>
#include <console/console.h>
#include <arch/acpi.h>
#include <arch/io.h>
#include <device/device.h>
#include <../southbridge/amd/sb700/sb700.h>
/*extern*/ u16 pm_base = 0x800;
/* pm_base should be set in sb acpi */
/* pm_base should be got from bar2 of rs780. Here I compact ACPI
* registers into 32 bytes limit.
* */
#define ACPI_PM_EVT_BLK (pm_base + 0x00) /* 4 bytes */
#define ACPI_PM1_CNT_BLK (pm_base + 0x04) /* 2 bytes */
#define ACPI_PMA_CNT_BLK (pm_base + 0x0F) /* 1 byte */
#define ACPI_PM_TMR_BLK (pm_base + 0x18) /* 4 bytes */
#define ACPI_GPE0_BLK (pm_base + 0x10) /* 8 bytes */
#define ACPI_CPU_CONTORL (pm_base + 0x08) /* 6 bytes */
void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
{
acpi_header_t *header = &(fadt->header);
pm_base &= 0xFFFF;
printk(BIOS_DEBUG, "pm_base: 0x%04x\n", pm_base);
/* Prepare the header */
memset((void *)fadt, 0, sizeof(acpi_fadt_t));
memcpy(header->signature, "FACP", 4);
header->length = 244;
header->revision = 1;
memcpy(header->oem_id, OEM_ID, 6);
memcpy(header->oem_table_id, "COREBOOT", 8);
memcpy(header->asl_compiler_id, ASLC, 4);
header->asl_compiler_revision = 0;
fadt->firmware_ctrl = (u32) facs;
fadt->dsdt = (u32) dsdt;
/* 3=Workstation,4=Enterprise Server, 7=Performance Server */
fadt->preferred_pm_profile = 0x03;
fadt->sci_int = 9;
/* disable system management mode by setting to 0: */
fadt->smi_cmd = 0;
fadt->acpi_enable = 0xf0;
fadt->acpi_disable = 0xf1;
fadt->s4bios_req = 0x0;
fadt->pstate_cnt = 0xe2;
pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xFF);
pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
pm_iowrite(0x22, ACPI_PM1_CNT_BLK & 0xFF);
pm_iowrite(0x23, ACPI_PM1_CNT_BLK >> 8);
pm_iowrite(0x24, ACPI_PM_TMR_BLK & 0xFF);
pm_iowrite(0x25, ACPI_PM_TMR_BLK >> 8);
pm_iowrite(0x28, ACPI_GPE0_BLK & 0xFF);
pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
/* CpuControl is in \_PR.CPU0, 6 bytes */
pm_iowrite(0x26, ACPI_CPU_CONTORL & 0xFF);
pm_iowrite(0x27, ACPI_CPU_CONTORL >> 8);
pm_iowrite(0x2A, 0); /* AcpiSmiCmdLo */
pm_iowrite(0x2B, 0); /* AcpiSmiCmdHi */
pm_iowrite(0x2C, ACPI_PMA_CNT_BLK & 0xFF);
pm_iowrite(0x2D, ACPI_PMA_CNT_BLK >> 8);
pm_iowrite(0x0E, 1<<3 | 0<<2); /* AcpiDecodeEnable, When set, SB uses
* the contents of the PM registers at
* index 20-2B to decode ACPI I/O address.
* AcpiSmiEn & SmiCmdEn*/
pm_iowrite(0x10, 1<<1 | 1<<3| 1<<5); /* RTC_En_En, TMR_En_En, GBL_EN_EN */
outl(0x1, ACPI_PM1_CNT_BLK); /* set SCI_EN */
fadt->pm1a_evt_blk = ACPI_PM_EVT_BLK;
fadt->pm1b_evt_blk = 0x0000;
fadt->pm1a_cnt_blk = ACPI_PM1_CNT_BLK;
fadt->pm1b_cnt_blk = 0x0000;
fadt->pm2_cnt_blk = ACPI_PMA_CNT_BLK;
fadt->pm_tmr_blk = ACPI_PM_TMR_BLK;
fadt->gpe0_blk = ACPI_GPE0_BLK;
fadt->gpe1_blk = 0x0000; /* we dont have gpe1 block, do we? */
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
fadt->pm2_cnt_len = 1;
fadt->pm_tmr_len = 4;
fadt->gpe0_blk_len = 8;
fadt->gpe1_blk_len = 0;
fadt->gpe1_base = 0;
fadt->cst_cnt = 0xe3;
fadt->p_lvl2_lat = 101;
fadt->p_lvl3_lat = 1001;
fadt->flush_size = 0;
fadt->flush_stride = 0;
fadt->duty_offset = 1;
fadt->duty_width = 3;
fadt->day_alrm = 0; /* 0x7d these have to be */
fadt->mon_alrm = 0; /* 0x7e added to cmos.layout */
fadt->century = 0; /* 0x7f to make rtc alrm work */
fadt->iapc_boot_arch = 0x3; /* See table 5-11 */
fadt->flags = 0x0001c1a5;/* 0x25; */
fadt->res2 = 0;
fadt->reset_reg.space_id = 1;
fadt->reset_reg.bit_width = 8;
fadt->reset_reg.bit_offset = 0;
fadt->reset_reg.resv = 0;
fadt->reset_reg.addrl = 0xcf9;
fadt->reset_reg.addrh = 0x0;
fadt->reset_value = 6;
fadt->x_firmware_ctl_l = (u32) facs;
fadt->x_firmware_ctl_h = 0;
fadt->x_dsdt_l = (u32) dsdt;
fadt->x_dsdt_h = 0;
fadt->x_pm1a_evt_blk.space_id = 1;
fadt->x_pm1a_evt_blk.bit_width = 32;
fadt->x_pm1a_evt_blk.bit_offset = 0;
fadt->x_pm1a_evt_blk.resv = 0;
fadt->x_pm1a_evt_blk.addrl = ACPI_PM_EVT_BLK;
fadt->x_pm1a_evt_blk.addrh = 0x0;
fadt->x_pm1b_evt_blk.space_id = 1;
fadt->x_pm1b_evt_blk.bit_width = 4;
fadt->x_pm1b_evt_blk.bit_offset = 0;
fadt->x_pm1b_evt_blk.resv = 0;
fadt->x_pm1b_evt_blk.addrl = 0x0;
fadt->x_pm1b_evt_blk.addrh = 0x0;
fadt->x_pm1a_cnt_blk.space_id = 1;
fadt->x_pm1a_cnt_blk.bit_width = 16;
fadt->x_pm1a_cnt_blk.bit_offset = 0;
fadt->x_pm1a_cnt_blk.resv = 0;
fadt->x_pm1a_cnt_blk.addrl = ACPI_PM1_CNT_BLK;
fadt->x_pm1a_cnt_blk.addrh = 0x0;
fadt->x_pm1b_cnt_blk.space_id = 1;
fadt->x_pm1b_cnt_blk.bit_width = 2;
fadt->x_pm1b_cnt_blk.bit_offset = 0;
fadt->x_pm1b_cnt_blk.resv = 0;
fadt->x_pm1b_cnt_blk.addrl = 0x0;
fadt->x_pm1b_cnt_blk.addrh = 0x0;
fadt->x_pm2_cnt_blk.space_id = 1;
fadt->x_pm2_cnt_blk.bit_width = 0;
fadt->x_pm2_cnt_blk.bit_offset = 0;
fadt->x_pm2_cnt_blk.resv = 0;
fadt->x_pm2_cnt_blk.addrl = ACPI_PMA_CNT_BLK;
fadt->x_pm2_cnt_blk.addrh = 0x0;
fadt->x_pm_tmr_blk.space_id = 1;
fadt->x_pm_tmr_blk.bit_width = 32;
fadt->x_pm_tmr_blk.bit_offset = 0;
fadt->x_pm_tmr_blk.resv = 0;
fadt->x_pm_tmr_blk.addrl = ACPI_PM_TMR_BLK;
fadt->x_pm_tmr_blk.addrh = 0x0;
fadt->x_gpe0_blk.space_id = 1;
fadt->x_gpe0_blk.bit_width = 32;
fadt->x_gpe0_blk.bit_offset = 0;
fadt->x_gpe0_blk.resv = 0;
fadt->x_gpe0_blk.addrl = ACPI_GPE0_BLK;
fadt->x_gpe0_blk.addrh = 0x0;
fadt->x_gpe1_blk.space_id = 1;
fadt->x_gpe1_blk.bit_width = 0;
fadt->x_gpe1_blk.bit_offset = 0;
fadt->x_gpe1_blk.resv = 0;
fadt->x_gpe1_blk.addrl = 0;
fadt->x_gpe1_blk.addrh = 0x0;
header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
}

139
src/mainboard/asrock/939a785gmh/get_bus_conf.c Normal file
View File

@ -0,0 +1,139 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
#include <stdlib.h>
#if CONFIG_LOGICAL_CPUS==1
#include <cpu/amd/multicore.h>
#endif
#include <cpu/amd/amdk8_sysconf.h>
/* Global variables for MB layouts and these will be shared by irqtable mptable
* and acpi_tables busnum is default.
*/
u8 bus_isa;
u8 bus_rs780[11];
u8 bus_sb700[2];
u32 apicid_sb700;
/*
* Here you only need to set value in pci1234 for HT-IO that could be installed or not
* You may need to preset pci1234 for HTIO board,
* please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
*/
u32 pci1234x[] = {
0x0000ff0,
};
/*
* HT Chain device num, actually it is unit id base of every ht device in chain,
* assume every chain only have 4 ht device at most
*/
u32 hcdnx[] = {
0x20202020,
};
u32 bus_type[256];
u32 sbdn_rs780;
u32 sbdn_sb700;
extern void get_sblk_pci1234(void);
static u32 get_bus_conf_done = 0;
void get_bus_conf(void);
void get_bus_conf(void)
{
u32 apicid_base;
device_t dev;
int i, j;
if (get_bus_conf_done == 1)
return; /* do it only once */
get_bus_conf_done = 1;
sysconf.hc_possible_num = ARRAY_SIZE(pci1234x);
for (i = 0; i < sysconf.hc_possible_num; i++) {
sysconf.pci1234[i] = pci1234x[i];
sysconf.hcdn[i] = hcdnx[i];
}
get_sblk_pci1234();
sysconf.sbdn = (sysconf.hcdn[0] & 0xff);
sbdn_rs780 = sysconf.sbdn;
sbdn_sb700 = 0;
for (i = 0; i < 2; i++) {
bus_sb700[i] = 0;
}
for (i = 0; i < ARRAY_SIZE(bus_rs780); i++) {
bus_rs780[i] = 0;
}
for (i = 0; i < 256; i++) {
bus_type[i] = 0; /* default ISA bus. */
}
bus_type[0] = 1; /* pci */
bus_rs780[0] = (sysconf.pci1234[0] >> 16) & 0xff;
bus_sb700[0] = bus_rs780[0];
bus_type[bus_rs780[0]] = 1;
/* sb700 */
dev = dev_find_slot(bus_sb700[0], PCI_DEVFN(sbdn_sb700 + 0x14, 4));
if (dev) {
bus_sb700[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_isa++;
for (j = bus_sb700[1]; j < bus_isa; j++)
bus_type[j] = 1;
}
/* rs780 */
for (i = 1; i < ARRAY_SIZE(bus_rs780); i++) {
dev = dev_find_slot(bus_rs780[0], PCI_DEVFN(sbdn_rs780 + i, 0));
if (dev) {
bus_rs780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
if(255 != bus_rs780[i]) {
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
bus_isa++;
bus_type[bus_rs780[i]] = 1; /* PCI bus. */
}
}
}
/* I/O APICs: APIC ID Version State Address */
bus_isa = 10;
#if CONFIG_LOGICAL_CPUS==1
apicid_base = get_apicid_base(1);
#else
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
#endif
apicid_sb700 = apicid_base + 0;
}

119
src/mainboard/asrock/939a785gmh/irq_tables.c Normal file
View File

@ -0,0 +1,119 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/
#include <console/console.h>
#include <device/pci.h>
#include <string.h>
#include <stdint.h>
#include <arch/pirq_routing.h>
#include <cpu/amd/amdk8_sysconf.h>
extern void get_bus_conf(void);
static void write_pirq_info(struct irq_info *pirq_info, u8 bus, u8 devfn,
u8 link0, u16 bitmap0, u8 link1, u16 bitmap1,
u8 link2, u16 bitmap2, u8 link3, u16 bitmap3,
u8 slot, u8 rfu)
{
pirq_info->bus = bus;
pirq_info->devfn = devfn;
pirq_info->irq[0].link = link0;
pirq_info->irq[0].bitmap = bitmap0;
pirq_info->irq[1].link = link1;
pirq_info->irq[1].bitmap = bitmap1;
pirq_info->irq[2].link = link2;
pirq_info->irq[2].bitmap = bitmap2;
pirq_info->irq[3].link = link3;
pirq_info->irq[3].bitmap = bitmap3;
pirq_info->slot = slot;
pirq_info->rfu = rfu;
}
extern u8 bus_isa;
extern u8 bus_rs780[8];
extern u8 bus_sb700[2];
extern unsigned long sbdn_sb700;
unsigned long write_pirq_routing_table(unsigned long addr)
{
struct irq_routing_table *pirq;
struct irq_info *pirq_info;
u32 slot_num;
u8 *v;
u8 sum = 0;
int i;
get_bus_conf(); /* it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c */
/* Align the table to be 16 byte aligned. */
addr += 15;
addr &= ~15;
/* This table must be betweeen 0xf0000 & 0x100000 */
printk(BIOS_INFO, "Writing IRQ routing tables to 0x%lx...", addr);
pirq = (void *)(addr);
v = (u8 *) (addr);
pirq->signature = PIRQ_SIGNATURE;
pirq->version = PIRQ_VERSION;
pirq->rtr_bus = bus_sb700[0];
pirq->rtr_devfn = ((sbdn_sb700 + 0x14) << 3) | 4;
pirq->exclusive_irqs = 0;
pirq->rtr_vendor = 0x1002;
pirq->rtr_device = 0x4384;
pirq->miniport_data = 0;
memset(pirq->rfu, 0, sizeof(pirq->rfu));
pirq_info = (void *)(&pirq->checksum + 1);
slot_num = 0;
/* pci bridge */
write_pirq_info(pirq_info, bus_sb700[0], ((sbdn_sb700 + 0x14) << 3) | 4,
0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0,
0);
pirq_info++;
slot_num++;
pirq->size = 32 + 16 * slot_num;
for (i = 0; i < pirq->size; i++)
sum += v[i];
sum = pirq->checksum - sum;
if (sum != pirq->checksum) {
pirq->checksum = sum;
}
printk(BIOS_INFO, "write_pirq_routing_table done.\n");
return (unsigned long)pirq_info;
}

174
src/mainboard/asrock/939a785gmh/mainboard.c Normal file
View File

@ -0,0 +1,174 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <boot/coreboot_tables.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <arch/coreboot_tables.h>
#include <../southbridge/amd/sb700/sb700.h>
#include "chip.h"
#define SMBUS_IO_BASE 0x6000
extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type,
uint64_t start, uint64_t size);
uint64_t uma_memory_base, uma_memory_size;
void set_pcie_dereset(void);
void set_pcie_reset(void);
/*
* Mahogany uses GPIO 6 as PCIe slot reset, GPIO4 as GFX slot reset. We need to
* pull it up before training the slot.
***/
void set_pcie_dereset()
{
u16 word;
device_t sm_dev;
/* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0xA8);
word |= (1 << 0) | (1 << 2); /* Set Gpio6,4 as output */
word &= ~((1 << 8) | (1 << 10));
pci_write_config16(sm_dev, 0xA8, word);
}
void set_pcie_reset()
{
u16 word;
device_t sm_dev;
/* GPIO 6 reset PCIe slot, GPIO 4 reset GFX PCIe */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0xA8);
word &= ~((1 << 0) | (1 << 2)); /* Set Gpio6,4 as output */
word &= ~((1 << 8) | (1 << 10));
pci_write_config16(sm_dev, 0xA8, word);
}
#if 0 /* not tested yet */
/********************************************************
* mahogany uses SB700 GPIO9 to detect IDE_DMA66.
* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
* get the cable type, 40 pin or 80 pin?
********************************************************/
static void get_ide_dma66(void)
{
u8 byte;
/*u32 sm_dev, ide_dev; */
device_t sm_dev, ide_dev;
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
byte = pci_read_config8(sm_dev, 0xA9);
byte |= (1 << 5); /* Set Gpio9 as input */
pci_write_config8(sm_dev, 0xA9, byte);
ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
byte = pci_read_config8(ide_dev, 0x56);
byte &= ~(7 << 0);
if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
byte |= 2 << 0; /* mode 2 */
else
byte |= 5 << 0; /* mode 5 */
pci_write_config8(ide_dev, 0x56, byte);
}
#endif /* get_ide_dma66 */
/*************************************************
* enable the dedicated function in mahogany board.
* This function called early than rs780_enable.
*************************************************/
static void mahogany_enable(device_t dev)
{
/* Leave it for future. */
/* struct mainboard_config *mainboard =
(struct mainboard_config *)dev->chip_info;*/
printk(BIOS_INFO, "Mainboard MAHOGANY Enable. dev=0x%p\n", dev);
#if (CONFIG_GFXUMA == 1)
msr_t msr, msr2;
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk
(BIOS_INFO, "%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
__func__, msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk
(BIOS_INFO, "%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
__func__, msr2.lo, msr2.hi);
/* refer to UMA Size Consideration in 780 BDG. */
switch (msr.lo) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x10000000; /* 256M recommended UMA */
break;
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
__func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
#else
uma_memory_size = 0x8000000; /* 128M recommended UMA */
uma_memory_base = 0x38000000; /* 1GB system memory supposed */
#endif
set_pcie_dereset();
/* get_ide_dma66(); */
}
int add_mainboard_resources(struct lb_memory *mem)
{
/* UMA is removed from system memory in the northbridge code, but
* in some circumstances we want the memory mentioned as reserved.
*/
#if (CONFIG_GFXUMA == 1)
printk(BIOS_INFO, "uma_memory_start=0x%llx, uma_memory_size=0x%llx \n",
uma_memory_base, uma_memory_size);
lb_add_memory_range(mem, LB_MEM_RESERVED, uma_memory_base,
uma_memory_size);
#endif
return 0;
}
struct chip_operations mainboard_ops = {
CHIP_NAME("AMD MAHOGANY Mainboard")
.enable_dev = mahogany_enable,
};

219
src/mainboard/asrock/939a785gmh/mptable.c Normal file
View File

@ -0,0 +1,219 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <arch/smp/mpspec.h>
#include <device/pci.h>
#include <arch/io.h>
#include <string.h>
#include <stdint.h>
#include <cpu/amd/amdk8_sysconf.h>
extern u8 bus_isa;
extern u8 bus_rs780[11];
extern u8 bus_sb700[2];
extern u32 apicid_sb700;
extern u32 bus_type[256];
extern u32 sbdn_rs780;
extern u32 sbdn_sb700;
extern void get_bus_conf(void);
static void *smp_write_config_table(void *v)
{
static const char sig[4] = "PCMP";
static const char oem[8] = "AMD ";
static const char productid[12] = "MAHOGANY ";
struct mp_config_table *mc;
int j;
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
memset(mc, 0, sizeof(*mc));
memcpy(mc->mpc_signature, sig, sizeof(sig));
mc->mpc_length = sizeof(*mc); /* initially just the header */
mc->mpc_spec = 0x04;
mc->mpc_checksum = 0; /* not yet computed */
memcpy(mc->mpc_oem, oem, sizeof(oem));
memcpy(mc->mpc_productid, productid, sizeof(productid));
mc->mpc_oemptr = 0;
mc->mpc_oemsize = 0;
mc->mpc_entry_count = 0; /* No entries yet... */
mc->mpc_lapic = LAPIC_ADDR;
mc->mpe_length = 0;
mc->mpe_checksum = 0;
mc->reserved = 0;
smp_write_processors(mc);
get_bus_conf();
/* Bus: Bus ID Type */
/* define bus and isa numbers */
for (j = 0; j < bus_isa; j++) {
smp_write_bus(mc, j, (char *)"PCI ");
}
smp_write_bus(mc, bus_isa, (char *)"ISA ");
/* I/O APICs: APIC ID Version State Address */
{
device_t dev;
u32 dword;
u8 byte;
dev =
dev_find_slot(bus_sb700[0],
PCI_DEVFN(sbdn_sb700 + 0x14, 0));
if (dev) {
dword = pci_read_config32(dev, 0x74) & 0xfffffff0;
smp_write_ioapic(mc, apicid_sb700, 0x11, dword);
/* Initialize interrupt mapping */
/* aza */
byte = pci_read_config8(dev, 0x63);
byte &= 0xf8;
byte |= 0; /* 0: INTA, ...., 7: INTH */
pci_write_config8(dev, 0x63, byte);
/* SATA */
dword = pci_read_config32(dev, 0xac);
dword &= ~(7 << 26);
dword |= 6 << 26; /* 0: INTA, ...., 7: INTH */
/* dword |= 1<<22; PIC and APIC co exists */
pci_write_config32(dev, 0xac, dword);
/*
* 00:12.0: PROG SATA : INT F
* 00:13.0: INTA USB_0
* 00:13.1: INTB USB_1
* 00:13.2: INTC USB_2
* 00:13.3: INTD USB_3
* 00:13.4: INTC USB_4
* 00:13.5: INTD USB2
* 00:14.1: INTA IDE
* 00:14.2: Prog HDA : INT E
* 00:14.5: INTB ACI
* 00:14.6: INTB MCI
*/
}
}
/* I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
#define IO_LOCAL_INT(type, intr, apicid, pin) \
smp_write_intsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, bus_isa, (intr), (apicid), (pin));
IO_LOCAL_INT(mp_ExtINT, 0x0, apicid_sb700, 0x0);
/* ISA ints are edge-triggered, and usually originate from the ISA bus,
* or its remainings.
*/
#define ISA_INT(intr, pin) \
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, (intr), apicid_sb700, (pin))
ISA_INT(0x1, 0x1);
ISA_INT(0x0, 0x2);
ISA_INT(0x3, 0x3);
ISA_INT(0x4, 0x4);
ISA_INT(0x6, 0x6);
ISA_INT(0x7, 0x7);
ISA_INT(0xc, 0xc);
ISA_INT(0xd, 0xd);
ISA_INT(0xe, 0xe);
/* PCI interrupts are level triggered, and are
* associated with a specific bus/device/function tuple.
*/
#if CONFIG_GENERATE_ACPI_TABLES == 0
#define PCI_INT(bus, dev, fn, pin) \
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, (bus), (((dev)<<2)|(fn)), apicid_sb700, (pin))
#else
#define PCI_INT(bus, dev, fn, pin)
#endif
/* usb */
PCI_INT(0x0, 0x12, 0x0, 0x10); /* USB */
PCI_INT(0x0, 0x12, 0x1, 0x11);
PCI_INT(0x0, 0x13, 0x0, 0x12);
PCI_INT(0x0, 0x13, 0x1, 0x13);
PCI_INT(0x0, 0x14, 0x0, 0x10);
/* sata */
PCI_INT(0x0, 0x11, 0x0, 0x16);
/* HD Audio: b0:d20:f1:reg63 should be 0. */
/* PCI_INT(0x0, 0x14, 0x2, 0x12); */
/* on board NIC & Slot PCIE. */
/* PCI_INT(bus_rs780[0x1], 0x5, 0x0, 0x12); */
/* PCI_INT(bus_rs780[0x1], 0x5, 0x1, 0x13); */
PCI_INT(bus_rs780[0x2], 0x0, 0x0, 0x12); /* Dev 2, external GFX */
/* PCI_INT(bus_rs780[0x3], 0x0, 0x0, 0x13); */
PCI_INT(bus_rs780[0x4], 0x0, 0x0, 0x10);
/* configuration B doesnt need dev 5,6,7 */
/*
* PCI_INT(bus_rs780[0x5], 0x0, 0x0, 0x11);
* PCI_INT(bus_rs780[0x6], 0x0, 0x0, 0x12);
* PCI_INT(bus_rs780[0x7], 0x0, 0x0, 0x13);
*/
PCI_INT(bus_rs780[0x9], 0x0, 0x0, 0x11);
PCI_INT(bus_rs780[0xA], 0x0, 0x0, 0x12); /* NIC */
/* PCI slots */
/* PCI_SLOT 0. */
PCI_INT(bus_sb700[1], 0x5, 0x0, 0x14);
PCI_INT(bus_sb700[1], 0x5, 0x1, 0x15);
PCI_INT(bus_sb700[1], 0x5, 0x2, 0x16);
PCI_INT(bus_sb700[1], 0x5, 0x3, 0x17);
/* PCI_SLOT 1. */
PCI_INT(bus_sb700[1], 0x6, 0x0, 0x15);
PCI_INT(bus_sb700[1], 0x6, 0x1, 0x16);
PCI_INT(bus_sb700[1], 0x6, 0x2, 0x17);
PCI_INT(bus_sb700[1], 0x6, 0x3, 0x14);
/* PCI_SLOT 2. */
PCI_INT(bus_sb700[1], 0x7, 0x0, 0x16);
PCI_INT(bus_sb700[1], 0x7, 0x1, 0x17);
PCI_INT(bus_sb700[1], 0x7, 0x2, 0x14);
PCI_INT(bus_sb700[1], 0x7, 0x3, 0x15);
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0);
IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1);
/* There is no extension information... */
/* Compute the checksums */
mc->mpe_checksum =
smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n",
mc, smp_next_mpe_entry(mc));
return smp_next_mpe_entry(mc);
}
unsigned long write_smp_table(unsigned long addr)
{
void *v;
v = smp_write_floating_table(addr);
return (unsigned long)smp_write_config_table(v);
}

278
src/mainboard/asrock/939a785gmh/resourcemap.c Normal file
View File

@ -0,0 +1,278 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
static void setup_939a785gmh_resource_map(void)
{
static const unsigned int register_values[] = {
/* Careful set limit registers before base registers which contain the enables */
/* DRAM Limit i Registers
* F1:0x44 i = 0
* F1:0x4C i = 1
* F1:0x54 i = 2
* F1:0x5C i = 3
* F1:0x64 i = 4
* F1:0x6C i = 5
* F1:0x74 i = 6
* F1:0x7C i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 3] Reserved
* [10: 8] Interleave select
* specifies the values of A[14:12] to use with interleave enable.
* [15:11] Reserved
* [31:16] DRAM Limit Address i Bits 39-24
* This field defines the upper address bits of a 40 bit address
* that define the end of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
/* DRAM Base i Registers
* F1:0x40 i = 0
* F1:0x48 i = 1
* F1:0x50 i = 2
* F1:0x58 i = 3
* F1:0x60 i = 4
* F1:0x68 i = 5
* F1:0x70 i = 6
* F1:0x78 i = 7
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 7: 2] Reserved
* [10: 8] Interleave Enable
* 000 = No interleave
* 001 = Interleave on A[12] (2 nodes)
* 010 = reserved
* 011 = Interleave on A[12] and A[14] (4 nodes)
* 100 = reserved
* 101 = reserved
* 110 = reserved
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
* [15:11] Reserved
* [13:16] DRAM Base Address i Bits 39-24
* This field defines the upper address bits of a 40-bit address
* that define the start of the DRAM region.
*/
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
/* Memory-Mapped I/O Limit i Registers
* F1:0x84 i = 0
* F1:0x8C i = 1
* F1:0x94 i = 2
* F1:0x9C i = 3
* F1:0xA4 i = 4
* F1:0xAC i = 5
* F1:0xB4 i = 6
* F1:0xBC i = 7
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = Reserved
* [ 6: 6] Reserved
* [ 7: 7] Non-Posted
* 0 = CPU writes may be posted
* 1 = CPU writes must be non-posted
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
* This field defines the upp adddress bits of a 40-bit address that
* defines the end of a memory-mapped I/O region n
*/
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
/* Memory-Mapped I/O Base i Registers
* F1:0x80 i = 0
* F1:0x88 i = 1
* F1:0x90 i = 2
* F1:0x98 i = 3
* F1:0xA0 i = 4
* F1:0xA8 i = 5
* F1:0xB0 i = 6
* F1:0xB8 i = 7
* [ 0: 0] Read Enable
* 0 = Reads disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes disabled
* 1 = Writes Enabled
* [ 2: 2] Cpu Disable
* 0 = Cpu can use this I/O range
* 1 = Cpu requests do not use this I/O range
* [ 3: 3] Lock
* 0 = base/limit registers i are read/write
* 1 = base/limit registers i are read-only
* [ 7: 4] Reserved
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
* This field defines the upper address bits of a 40bit address
* that defines the start of memory-mapped I/O region i
*/
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
/* PCI I/O Limit i Registers
* F1:0xC4 i = 0
* F1:0xCC i = 1
* F1:0xD4 i = 2
* F1:0xDC i = 3
* [ 2: 0] Destination Node ID
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 3: 3] Reserved
* [ 5: 4] Destination Link ID
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 = reserved
* [11: 6] Reserved
* [24:12] PCI I/O Limit Address i
* This field defines the end of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff000,
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
/* PCI I/O Base i Registers
* F1:0xC0 i = 0
* F1:0xC8 i = 1
* F1:0xD0 i = 2
* F1:0xD8 i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 3: 2] Reserved
* [ 4: 4] VGA Enable
* 0 = VGA matches Disabled
* 1 = matches all address < 64K and where A[9:0] is in the
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
* [ 5: 5] ISA Enable
* 0 = ISA matches Disabled
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
* from matching agains this base/limit pair
* [11: 6] Reserved
* [24:12] PCI I/O Base i
* This field defines the start of PCI I/O region n
* [31:25] Reserved
*/
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
/* Config Base and Limit i Registers
* F1:0xE0 i = 0
* F1:0xE4 i = 1
* F1:0xE8 i = 2
* F1:0xEC i = 3
* [ 0: 0] Read Enable
* 0 = Reads Disabled
* 1 = Reads Enabled
* [ 1: 1] Write Enable
* 0 = Writes Disabled
* 1 = Writes Enabled
* [ 2: 2] Device Number Compare Enable
* 0 = The ranges are based on bus number
* 1 = The ranges are ranges of devices on bus 0
* [ 3: 3] Reserved
* [ 6: 4] Destination Node
* 000 = Node 0
* 001 = Node 1
* 010 = Node 2
* 011 = Node 3
* 100 = Node 4
* 101 = Node 5
* 110 = Node 6
* 111 = Node 7
* [ 7: 7] Reserved
* [ 9: 8] Destination Link
* 00 = Link 0
* 01 = Link 1
* 10 = Link 2
* 11 - Reserved
* [15:10] Reserved
* [23:16] Bus Number Base i
* This field defines the lowest bus number in configuration region i
* [31:24] Bus Number Limit i
* This field defines the highest bus number in configuration regin i
*/
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x08000003,
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000,
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000,
};
int max;
max = ARRAY_SIZE(register_values);
setup_resource_map(register_values, max);
}

248
src/mainboard/asrock/939a785gmh/romstage.c Normal file
View File

@ -0,0 +1,248 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
* Copyright (C) 2010 Rudolf Marek <r.marek@assembler.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define RAMINIT_SYSINFO 1
#define K8_SET_FIDVID 1
#define QRANK_DIMM_SUPPORT 1
#if CONFIG_LOGICAL_CPUS==1
#define SET_NB_CFG_54 1
#endif
#define RC0 (6<<8)
#define RC1 (7<<8)
#define DIMM0 0x50
#define DIMM1 0x51
#define ICS951462_ADDRESS 0x69
#define SMBUS_HUB 0x71
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "console/console.c"
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/winbond/w83627dhg/w83627dhg_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"
#include "southbridge/amd/rs780/rs780_early_setup.c"
#include "southbridge/amd/sb700/sb700_early_setup.c"
#include "northbridge/amd/amdk8/debug.c" /* After sb700_early_setup.c! */
#define SERIAL_DEV PNP_DEV(0x2e, W83627DHG_SP1)
#define GPIO6_DEV PNP_DEV(0x2e, W83627DHG_GPIO6)
#define GPIO2345_DEV PNP_DEV(0x2e, W83627DHG_GPIO2345)
/* CAN'T BE REMOVED! crt0.S will use it. I don't know WHY!*/
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
/* called in raminit_f.c */
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
}
/*called in raminit_f.c */
static inline int spd_read_byte(u32 device, u32 address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdk8/amdk8.h"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "lib/generic_sdram.c"
#include "resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/early_ht.c"
void sio_init(void)
{
u8 reg;
pnp_enter_ext_func_mode(GPIO2345_DEV);
pnp_set_logical_device(GPIO2345_DEV);
/* Pin 119 ~ 120 GP21, GP20 */
reg = pnp_read_config(GPIO2345_DEV, 0x29);
pnp_write_config(GPIO2345_DEV, 0x29, (reg | 2));
/* todo document this */
pnp_write_config(GPIO2345_DEV, 0x2c, 0x1);
pnp_write_config(GPIO2345_DEV, 0x2d, 0x1);
//idx 30 e0 e1 e2 e3 e4 e5 e6 e7 e8 e9 f0 f1 f2 f3 f4 f5 f6 f7 fe
//val 07 XX XX XX f6 0e 00 00 00 00 ff d6 96 00 40 d0 83 00 00 07
//GPO20 - 1 = 1.82 0 = 1.92 sideport voltage
//mGPUV GPO40 | GPO41 | GPIO23 - 000 - 1.45V step 0.05 -- 111 - 1.10V
//DDR voltage 44 45 46
/* GPO20 - sideport voltage GPO23 - mgpuV */
pnp_write_config(GPIO2345_DEV, 0x30, 0x07); /* Enable GPIO 2,3,4. */
pnp_write_config(GPIO2345_DEV, 0xe3, 0xf6); /* dir of GPIO2 11110110*/
pnp_write_config(GPIO2345_DEV, 0xe4, 0x0e); /* data */
pnp_write_config(GPIO2345_DEV, 0xe5, 0x00); /* No inversion */
/* GPO30 GPO33 GPO35 */
//GPO35 - loadline control 0 - enabled
//GPIO30 - unknown
//GPIO33 - unknown
pnp_write_config(GPIO2345_DEV, 0xf0, 0xd6); /* dir of GPIO3 11010110*/
pnp_write_config(GPIO2345_DEV, 0xf1, 0x96); /* data */
pnp_write_config(GPIO2345_DEV, 0xf2, 0x00); /* No inversion */
/* GPO40 GPO41 GPO42 GPO43 PO45 */
pnp_write_config(GPIO2345_DEV, 0xf4, 0xd0); /* dir of GPIO4 11010000 */
pnp_write_config(GPIO2345_DEV, 0xf5, 0x83); /* data */
pnp_write_config(GPIO2345_DEV, 0xf6, 0x00); /* No inversion */
pnp_write_config(GPIO2345_DEV, 0xf7, 0x00); /* MFC */
pnp_write_config(GPIO2345_DEV, 0xf8, 0x00); /* MFC */
pnp_write_config(GPIO2345_DEV, 0xfe, 0x07); /* trig type */
pnp_exit_ext_func_mode(GPIO2345_DEV);
}
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const u16 spd_addr[] = { DIMM0, 0, 0, 0, DIMM1, 0, 0, 0, };
int needs_reset = 0;
u32 bsp_apicid = 0;
msr_t msr;
struct cpuid_result cpuid1;
struct sys_info *sysinfo = (struct sys_info *)(CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* sb700_lpc_port80(); */
sb700_pci_port80();
}
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
}
enable_rs780_dev8();
sb700_lpc_init();
sio_init();
w83627dhg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
printk(BIOS_DEBUG, "bsp_apicid=0x%x\n", bsp_apicid);
setup_939a785gmh_resource_map();
setup_coherent_ht_domain();
#if CONFIG_LOGICAL_CPUS==1
/* It is said that we should start core1 after all core0 launched */
wait_all_core0_started();
start_other_cores();
#endif
wait_all_aps_started(bsp_apicid);
ht_setup_chains_x(sysinfo);
/* run _early_setup before soft-reset. */
rs780_early_setup();
sb700_early_setup();
/* Check to see if processor is capable of changing FIDVID */
/* otherwise it will throw a GP# when reading FIDVID_STATUS */
cpuid1 = cpuid(0x80000007);
if( (cpuid1.edx & 0x6) == 0x6 ) {
/* Read FIDVID_STATUS */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "begin msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
enable_fid_change();
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
init_fidvid_bsp(bsp_apicid);
/* show final fid and vid */
msr=rdmsr(0xc0010042);
printk(BIOS_DEBUG, "end msr fid, vid: hi=0x%x, lo=0x%x\n", msr.hi, msr.lo);
} else {
printk(BIOS_DEBUG, "Changing FIDVID not supported\n");
}
needs_reset = optimize_link_coherent_ht();
needs_reset |= optimize_link_incoherent_ht(sysinfo);
rs780_htinit();
printk(BIOS_DEBUG, "needs_reset=0x%x\n", needs_reset);
if (needs_reset) {
print_info("ht reset -\n");
soft_reset();
}
allow_all_aps_stop(bsp_apicid);
/* It's the time to set ctrl now; */
printk(BIOS_DEBUG, "sysinfo->nodes: %2x sysinfo->ctrl: %p spd_addr: %p\n",
sysinfo->nodes, sysinfo->ctrl, spd_addr);
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
rs780_before_pci_init();
sb700_before_pci_init();
post_cache_as_ram();
}

28
src/mainboard/asrock/Kconfig Normal file
View File

@ -0,0 +1,28 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2009 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
choice
prompt "Mainboard model"
depends on VENDOR_ASROCK
source "src/mainboard/asrock/939a785gmh/Kconfig"
endchoice