GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/brya/var/vell: Swap TPM I2C with touchscreen I2C 

According to the latest schematic for the next build phase, exchange I2C port for TPM/touchscreen.
TPM: I2C3 -> I2C1
Touchscreen: I2C1 -> I2C3

BUG=b:210572663
TEST=FW_NAME=vell emerge-brya coreboot

Change-Id: If72717a2c073f5b871c3109399f466a04a9d2484
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Shon Wang 2021-12-14 20:41:48 +08:00 committed by Felix Held
parent af69af996e
commit 138f547c8b
3 changed files with 29 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
src/mainboard/google/brya/Kconfig
View File

@ -100,7 +100,7 @@ config DRIVER_TPM_I2C_BUS
default 0x1 if BOARD_GOOGLE_FELWINTER
default 0x1 if BOARD_GOOGLE_ANAHERA
default 0x3 if BOARD_GOOGLE_ANAHERA4ES
default 0x3 if BOARD_GOOGLE_VELL
default 0x1 if BOARD_GOOGLE_VELL
default 0x3 if BOARD_GOOGLE_TANIKS
default 0x0 if BOARD_GOOGLE_NIVVIKS
default 0x0 if BOARD_GOOGLE_NEREID

8
src/mainboard/google/brya/variants/vell/gpio.c
View File

@ -92,10 +92,10 @@ static const struct pad_config early_gpio_table[] = {
PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT),
/* B4 : PROC_GP3 ==> SSD_PERST_L */
PAD_CFG_GPO(GPP_B4, 0, DEEP),
/* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */
PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2),
/* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */
PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2),
/* H6 : I2C1_SDA ==> PCH_I2C_TPM_SDA */
PAD_CFG_NF(GPP_H6, NONE, DEEP, NF1),
/* H7 : IC1_SCL ==> PCH_I2C_TPM_SCL */
PAD_CFG_NF(GPP_H7, NONE, DEEP, NF1),
/*
* D1 : ISH_GP1 ==> FP_RST_ODL
* FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down.

27
src/mainboard/google/brya/variants/vell/overridetree.cb
View File

@ -39,13 +39,27 @@ chip soc/intel/alderlake
#+-------------------+---------------------------+
#| GSPI1 | Fingerprint MCU |
#| I2C0 | Audio |
#| I2C1 | Touchscreen |
#| I2C2 | |
#| I2C3 | cr50 TPM. Early init is |
#| I2C1 | cr50 TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| I2C2 | |
#| I2C3 | Touchscreen |
#| I2C5 | Trackpad |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.i2c[1] = {
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 600,
.fall_time_ns = 400,
.data_hold_time_ns = 50,
},
.i2c[3] = {
.rise_time_ns = 650,
.fall_time_ns = 400,
.data_hold_time_ns = 50,
},
}"
register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC3)" # USB2_C3
# I2C Port Config
@ -183,6 +197,13 @@ chip soc/intel/alderlake
end
end #I2C0
device ref i2c1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
device i2c 50 on end
end
end
device ref i2c3 on
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""