This patch allows support for multiple so-dimms, single or double sided.

Signed-off-by: Joseph Smith <joe@settoplinux.org>
Acked-by: Peter Stuge <peter@stuge.se>

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3380 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Joseph Smith 2008-06-22 04:22:46 +00:00 committed by Joseph Smith
parent 67939dc75f
commit 14669ae023
1 changed files with 45 additions and 49 deletions

View File

@ -53,7 +53,7 @@ Macros and definitions.
* 0x2 for Refresh interval 7.8 us for 133MHz
* 0x7 /* Refresh interval 128 Clocks. (Fast Refresh Mode)
*/
#define RAM_COMMAND_REFRESH 0x2
#define RAM_COMMAND_REFRESH 0x1
/* DRC[6:4] - SDRAM Mode Select (SMS). */
#define RAM_COMMAND_SELF_REFRESH 0x0
@ -76,7 +76,7 @@ static void do_ram_command(const struct mem_controller *ctrl, uint32_t command,
uint32_t addr_offset)
{
int i;
uint8_t reg8, reg8_2 = 0;
uint8_t dimm_start, dimm_end;
uint32_t reg32;
/* Configure the RAM command. */
@ -84,28 +84,27 @@ static void do_ram_command(const struct mem_controller *ctrl, uint32_t command,
/* Clear bits 29, 10-8, 6-4. */
reg32 &= 0xdffff88f;
reg32 |= command << 4;
/* If RAM_COMMAND_NORMAL set the refresh mode and IC bit. */
if (command == RAM_COMMAND_NORMAL)
reg32 |= ((RAM_COMMAND_REFRESH << 8) | (RAM_COMMAND_IC << 29));
pci_write_config32(ctrl->d0, DRC, reg32);
/* RAM_COMMAND_NORMAL affects only the memory controller and
doesn't need to be "sent" to the DIMMs. */
/* if (command == RAM_COMMAND_NORMAL) return; */
/* Send the ram command to each row of memory.
* (DIMM_SOCKETS * 2) is the maximum number of rows possible.
* Note: Each DRB defines the upper boundary address of
* each SDRAM row in 32-MB granularity.
*/
dimm_start = 0;
PRINT_DEBUG(" Sending RAM command 0x");
PRINT_DEBUG_HEX32(reg32);
PRINT_DEBUG(" to 0x");
PRINT_DEBUG_HEX32(0 + addr_offset);
PRINT_DEBUG("\r\n");
/* NOTE: Dual-sided ready. */
read32(0 + addr_offset);
for (i = 0; i < 4; i++) {
reg8 = pci_read_config8(ctrl->d0, DRB + i);
if (reg8 != reg8_2)
read32(reg8 * 32 * 1024 * 1024);
reg8_2 = reg8;
for (i = 0; i < (DIMM_SOCKETS * 2); i++) {
dimm_end = pci_read_config8(ctrl->d0, DRB + i);
if (dimm_end > dimm_start) {
PRINT_DEBUG(" Sending RAM command 0x");
PRINT_DEBUG_HEX32(reg32);
PRINT_DEBUG(" to 0x");
PRINT_DEBUG_HEX32((dimm_start * 32 * 1024 * 1024) + addr_offset);
PRINT_DEBUG("\r\n");
read32((dimm_start * 32 * 1024 * 1024) + addr_offset);
}
/* Set the start of the next DIMM. */
dimm_start = dimm_end;
}
}
@ -316,38 +315,28 @@ static void set_dram_row_attributes(const struct mem_controller *ctrl)
value = spd_read_byte(device, 5);
if (value == 1) {
switch (dra) {
case 2: /* 2KB */
dra = 0xF0;
break;
case 4: /* 4KB */
dra = 0xF1;
break;
case 8: /* 8KB */
dra = 0xF2;
break;
case 16: /* 16KB */
dra = 0xF3;
break;
default:
if (dra == 2) {
dra = 0xF0; /* 2KB */
} else if (dra == 4) {
dra = 0xF1; /* 4KB */
} else if (dra == 8) {
dra = 0xF2; /* 8KB */
} else if (dra == 16) {
dra = 0xF3; /* 16KB */
} else {
print_err("Page size not supported\r\n");
die("HALT\r\n");
}
} else if (value == 2) {
switch (dra) {
case 2: /* 2KB */
dra = 0x00;
break;
case 4: /* 4KB */
dra = 0x11;
break;
case 8: /* 8KB */
dra = 0x22;
break;
case 16: /* 16KB */
dra = 0x33;
break;
default:
if (dra == 2) {
dra = 0x00; /* 2KB */
} else if (dra == 4) {
dra = 0x11; /* 4KB */
} else if (dra == 8) {
dra = 0x22; /* 8KB */
} else if (dra == 16) {
dra = 0x33; /* 16KB */
} else {
print_err("Page size not supported\r\n");
die("HALT\r\n");
}
@ -471,6 +460,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
int i;
uint32_t reg32;
/* 0. Wait until power/voltages and clocks are stable (200us). */
udelay(200);
@ -503,6 +493,12 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0);
udelay(1);
/* 6. Enable refresh and Set initialization complete. */
PRINT_DEBUG("RAM Enable 6: Enable Refresh and IC\r\n");
reg32 = pci_read_config32(ctrl->d0, DRC);
reg32 |= ((RAM_COMMAND_REFRESH << 8) | (RAM_COMMAND_IC << 29));
pci_write_config32(ctrl->d0, DRC, reg32);
PRINT_DEBUG("Northbridge following SDRAM init:\r\n");
DUMPNORTH();
}