From 14cde9e96a777f9d75016a13b23fab0480515f58 Mon Sep 17 00:00:00 2001 From: Li-Ta Lo Date: Thu, 7 Jul 2005 21:31:50 +0000 Subject: [PATCH] add ibm e326 support, basically it is the same as e325 git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1981 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/ibm/e326/Config.lb | 210 +++++++++++++++++++++ src/mainboard/ibm/e326/Options.lb | 218 +++++++++++++++++++++ src/mainboard/ibm/e326/auto.c | 237 +++++++++++++++++++++++ src/mainboard/ibm/e326/chip.h | 5 + src/mainboard/ibm/e326/cmos.layout | 96 ++++++++++ src/mainboard/ibm/e326/failover.c | 72 +++++++ src/mainboard/ibm/e326/irq_tables.c | 61 ++++++ src/mainboard/ibm/e326/mainboard.c | 10 + src/mainboard/ibm/e326/mptable.c | 175 +++++++++++++++++ src/mainboard/ibm/e326/resourcemap.c | 271 +++++++++++++++++++++++++++ 10 files changed, 1355 insertions(+) create mode 100644 src/mainboard/ibm/e326/Config.lb create mode 100644 src/mainboard/ibm/e326/Options.lb create mode 100644 src/mainboard/ibm/e326/auto.c create mode 100644 src/mainboard/ibm/e326/chip.h create mode 100644 src/mainboard/ibm/e326/cmos.layout create mode 100644 src/mainboard/ibm/e326/failover.c create mode 100644 src/mainboard/ibm/e326/irq_tables.c create mode 100644 src/mainboard/ibm/e326/mainboard.c create mode 100644 src/mainboard/ibm/e326/mptable.c create mode 100644 src/mainboard/ibm/e326/resourcemap.c diff --git a/src/mainboard/ibm/e326/Config.lb b/src/mainboard/ibm/e326/Config.lb new file mode 100644 index 0000000000..604a82d46d --- /dev/null +++ b/src/mainboard/ibm/e326/Config.lb @@ -0,0 +1,210 @@ +## +## Compute the location and size of where this firmware image +## (linuxBIOS plus bootloader) will live in the boot rom chip. +## +if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + default ROM_SECTION_OFFSET = 0 +end + +## +## Compute the start location and size size of +## The linuxBIOS bootloader. +## +default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) +default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) + +## +## Compute where this copy of linuxBIOS will start in the boot rom +## +default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) + +## +## Compute a range of ROM that can cached to speed up linuxBIOS, +## execution speed. +## +## XIP_ROM_SIZE must be a power of 2. +## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE +## +default XIP_ROM_SIZE=65536 +default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) + +## +## Set all of the defaults for an x86 architecture +## + +arch i386 end + +## +## Build the objects we have code for in this directory. +## + +driver mainboard.o +if HAVE_MP_TABLE object mptable.o end +if HAVE_PIRQ_TABLE object irq_tables.o end + +## +## Romcc output +## +makerule ./failover.E + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +end + +makerule ./failover.inc + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" +end + +makerule ./auto.E + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end +makerule ./auto.inc + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" +end + +## +## Build our 16 bit and 32 bit linuxBIOS entry code +## +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds + +## +## Build our reset vector (This is where linuxBIOS is entered) +## +if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds +else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds +end + +### Should this be in the northbridge code? +mainboardinit arch/i386/lib/cpu_reset.inc + +## +## Include an id string (For safe flashing) +## +mainboardinit arch/i386/lib/id.inc +ldscript /arch/i386/lib/id.lds + +### +### This is the early phase of linuxBIOS startup +### Things are delicate and we test to see if we should +### failover to another image. +### +if USE_FALLBACK_IMAGE + ldscript /arch/i386/lib/failover.lds + mainboardinit ./failover.inc +end + +### +### O.k. We aren't just an intermediary anymore! +### + +## +## Setup RAM +## +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc +mainboardinit ./auto.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc + +## +## Include the secondary Configuration files +## +dir /pc80 +config chip.h + + +chip northbridge/amd/amdk8/root_complex + device pci_domain 0 on + chip northbridge/amd/amdk8 + device pci 18.0 on end # LDT 0 + device pci 18.0 on # LDT 1 + chip southbridge/amd/amd8131 + device pci 0.0 on end + device pci 0.1 on end + device pci 1.0 on end + device pci 1.1 on end + end + chip southbridge/amd/amd8111 + device pci 0.0 on + device pci 0.0 on end + device pci 0.1 on end + device pci 0.2 on end + device pci 1.0 off end + end + device pci 1.0 on + chip superio/NSC/pc87366 + device pnp 2e.0 off # Floppy + io 0x60 = 0x3f0 + irq 0x70 = 6 + drq 0x74 = 2 + end + device pnp 2e.1 off # Parallel Port + io 0x60 = 0x378 + irq 0x70 = 7 + end + device pnp 2e.2 off # Com 2 + io 0x60 = 0x2f8 + irq 0x70 = 3 + end + device pnp 2e.3 on # Com 1 + io 0x60 = 0x3f8 + irq 0x70 = 4 + end + device pnp 2e.4 off end # SWC + device pnp 2e.5 off end # Mouse + device pnp 2e.6 on # Keyboard + io 0x60 = 0x60 + io 0x62 = 0x64 + irq 0x70 = 1 + end + device pnp 2e.7 off end # GPIO + device pnp 2e.8 off end # ACB + device pnp 2e.9 off end # FSCM + device pnp 2e.a off end # WDT + end + end + device pci 1.1 on end + device pci 1.2 on end + device pci 1.3 on end + device pci 1.5 off end + device pci 1.6 off end + end + end # device pci 18.0 + device pci 18.0 on end # LDT2 + device pci 18.1 on end + device pci 18.2 on end + device pci 18.3 on end + end + chip northbridge/amd/amdk8 + device pci 19.0 on end + device pci 19.0 on end + device pci 19.0 on end + device pci 19.1 on end + device pci 19.2 on end + device pci 19.3 on end + end + end + device apic_cluster 0 on + chip cpu/amd/socket_940 + device apic 0 on end + end + chip cpu/amd/socket_940 + device apic 1 on end + end + end +end + diff --git a/src/mainboard/ibm/e326/Options.lb b/src/mainboard/ibm/e326/Options.lb new file mode 100644 index 0000000000..0a1c6666d1 --- /dev/null +++ b/src/mainboard/ibm/e326/Options.lb @@ -0,0 +1,218 @@ +uses HAVE_MP_TABLE +uses HAVE_PIRQ_TABLE +uses USE_FALLBACK_IMAGE +uses HAVE_FALLBACK_BOOT +uses HAVE_HARD_RESET +uses HARD_RESET_BUS +uses HARD_RESET_DEVICE +uses HARD_RESET_FUNCTION +uses IRQ_SLOT_COUNT +uses HAVE_OPTION_TABLE +uses CONFIG_MAX_CPUS +uses CONFIG_MAX_PHYSICAL_CPUS +uses CONFIG_IOAPIC +uses CONFIG_SMP +uses FALLBACK_SIZE +uses ROM_SIZE +uses ROM_SECTION_SIZE +uses ROM_IMAGE_SIZE +uses ROM_SECTION_SIZE +uses ROM_SECTION_OFFSET +uses CONFIG_ROM_STREAM +uses CONFIG_ROM_STREAM_START +uses PAYLOAD_SIZE +uses _ROMBASE +uses XIP_ROM_SIZE +uses XIP_ROM_BASE +uses STACK_SIZE +uses HEAP_SIZE +uses USE_OPTION_TABLE +uses LB_CKS_RANGE_START +uses LB_CKS_RANGE_END +uses LB_CKS_LOC +uses MAINBOARD_PART_NUMBER +uses MAINBOARD_VENDOR +uses MAINBOARD +uses LINUXBIOS_EXTRA_VERSION +uses _RAMBASE +uses TTYS0_BAUD +uses TTYS0_BASE +uses TTYS0_LCS +uses DEFAULT_CONSOLE_LOGLEVEL +uses MAXIMUM_CONSOLE_LOGLEVEL +uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL +uses CONFIG_CONSOLE_SERIAL8250 +uses CROSS_COMPILE +uses CC +uses HOSTCC +uses OBJCOPY + +uses CONFIG_USE_INIT + + +### +### Build options +### + +## +## ROM_SIZE is the size of boot ROM that this board will use. +## +default ROM_SIZE=524288 + +## +## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use +## +default FALLBACK_SIZE=131072 + +## +## Build code for the fallback boot +## +default HAVE_FALLBACK_BOOT=1 + +## +## Build code to reset the motherboard from linuxBIOS +## +default HAVE_HARD_RESET=1 + +## +## Funky hard reset implementation +## +default HARD_RESET_BUS=1 +default HARD_RESET_DEVICE=4 +default HARD_RESET_FUNCTION=0 + +## +## Build code to export a programmable irq routing table +## +default HAVE_PIRQ_TABLE=1 +default IRQ_SLOT_COUNT=9 + +## +## Build code to export an x86 MP table +## Useful for specifying IRQ routing values +## +default HAVE_MP_TABLE=1 + +## +## Build code to export a CMOS option table +## +default HAVE_OPTION_TABLE=1 + +## +## Move the default LinuxBIOS cmos range off of AMD RTC registers +## +default LB_CKS_RANGE_START=49 +default LB_CKS_RANGE_END=122 +default LB_CKS_LOC=123 + +## +## Build code for SMP support +## Only worry about 2 micro processors +## +default CONFIG_SMP=1 +default CONFIG_MAX_CPUS=2 +default CONFIG_MAX_PHYSICAL_CPUS=2 + +## +## Build code to setup a generic IOAPIC +## +default CONFIG_IOAPIC=1 + +## +## Clean up the motherboard id strings +## +default MAINBOARD_PART_NUMBER="E326" +default MAINBOARD_VENDOR="IBM" +#default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x161f +#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x3016 + +### +### LinuxBIOS layout values +### + +## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. +default ROM_IMAGE_SIZE = 65536 + +## +## Use a small 8K stack +## +default STACK_SIZE=0x2000 + +## +## Use a small 16K heap +## +default HEAP_SIZE=0x8000 + +## +## Only use the option table in a normal image +## +default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE + +## +## LinuxBIOS C code runs at this location in RAM +## +default _RAMBASE=0x00004000 + +## +## Load the payload from the ROM +## +default CONFIG_ROM_STREAM = 1 + +### +### Defaults of options that you may want to override in the target config file +### + +## +## The default compiler +## +default CC="$(CROSS_COMPILE)gcc -m32" +default HOSTCC="gcc" + +## +## The Serial Console +## + +# To Enable the Serial Console +default CONFIG_CONSOLE_SERIAL8250=1 + +## Select the serial console baud rate +default TTYS0_BAUD=115200 +#default TTYS0_BAUD=57600 +#default TTYS0_BAUD=38400 +#default TTYS0_BAUD=19200 +#default TTYS0_BAUD=9600 +#default TTYS0_BAUD=4800 +#default TTYS0_BAUD=2400 +#default TTYS0_BAUD=1200 + +# Select the serial console base port +default TTYS0_BASE=0x3f8 + +# Select the serial protocol +# This defaults to 8 data bits, 1 stop bit, and no parity +default TTYS0_LCS=0x3 + +## +### Select the linuxBIOS loglevel +## +## EMERG 1 system is unusable +## ALERT 2 action must be taken immediately +## CRIT 3 critical conditions +## ERR 4 error conditions +## WARNING 5 warning conditions +## NOTICE 6 normal but significant condition +## INFO 7 informational +## DEBUG 8 debug-level messages +## SPEW 9 Way too many details + +## Request this level of debugging output +default DEFAULT_CONSOLE_LOGLEVEL=8 +## At a maximum only compile in this level of debugging +default MAXIMUM_CONSOLE_LOGLEVEL=8 + +## +## Select power on after power fail setting +default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" + +### End Options.lb +end diff --git a/src/mainboard/ibm/e326/auto.c b/src/mainboard/ibm/e326/auto.c new file mode 100644 index 0000000000..1f3aef1c56 --- /dev/null +++ b/src/mainboard/ibm/e326/auto.c @@ -0,0 +1,237 @@ +#define ASSEMBLY 1 +#define DEFAULT_CONSOLE_LOGLEVEL 8 +#define MAXIMUM_CONSOLE_LOGLEVEL 8 +#include +#include +#include +#include +#include +#include +#include +#include "option_table.h" +#include "pc80/mc146818rtc_early.c" +#include "pc80/serial.c" +#include "arch/i386/lib/console.c" +#include "ram/ramtest.c" +#include "northbridge/amd/amdk8/incoherent_ht.c" +#include "southbridge/amd/amd8111/amd8111_early_smbus.c" +#include "northbridge/amd/amdk8/raminit.h" +#include "cpu/amd/model_fxx/apic_timer.c" +#include "lib/delay.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" +#include "northbridge/amd/amdk8/debug.c" +#include "northbridge/amd/amdk8/cpu_rev.c" +#include "superio/NSC/pc87366/pc87366_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" + +#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1) + +static void hard_reset(void) +{ + set_bios_reset(); + + /* enable cf9 */ + pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1); + /* reset */ + outb(0x0e, 0x0cf9); +} + +static void soft_reset(void) +{ + set_bios_reset(); + pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1); +} + +static void memreset_setup(void) +{ + if (is_cpu_pre_c0()) { + /* Set the memreset low */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); + /* Ensure the BIOS has control of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17); + } else { + /* Ensure the CPU has controll of the memory lines */ + outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); + } +} + +static void memreset(int controllers, const struct mem_controller *ctrl) +{ + if (is_cpu_pre_c0()) { + udelay(800); + /* Set memreset_high */ + outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); + udelay(90); + } +} + +static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes) +{ + /* Routing Table Node i + * + * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c + * i: 0, 1, 2, 3, 4, 5, 6, 7 + * + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [11: 8] Response Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + * [19:16] Broadcast route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + + uint32_t ret = 0x00010101; /* default row entry */ + + /* CPU0 LDT2 <-> LDT2 CPU1 */ + static const unsigned int rows_2p[2][2] = { + { 0x00090101, 0x00010808 }, + { 0x00010808, 0x00090101 } + }; + + if (maxnodes > 2) { + print_debug("this mainboard is only designed for 2 cpus\r\n"); + maxnodes = 2; + } + + if (!(node >= maxnodes || row >= maxnodes)) { + ret = rows_2p[node][row]; + } + + return ret; +} + +static inline void activate_spd_rom(const struct mem_controller *ctrl) +{ + /* nothing to do */ +} + +static inline int spd_read_byte(unsigned device, unsigned address) +{ + return smbus_read_byte(device, address); +} + +#include "northbridge/amd/amdk8/raminit.c" + +#include "northbridge/amd/amdk8/coherent_ht.c" +#include "sdram/generic_sdram.c" +#include "mainboard/ibm/e326/resourcemap.c" + +#define FIRST_CPU 1 +#define SECOND_CPU 1 +#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU) +static void main(unsigned long bist) +{ + static const struct mem_controller cpu[] = { +#if FIRST_CPU + { + .node_id = 0, + .f0 = PCI_DEV(0, 0x18, 0), + .f1 = PCI_DEV(0, 0x18, 1), + .f2 = PCI_DEV(0, 0x18, 2), + .f3 = PCI_DEV(0, 0x18, 3), + .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, + .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, + }, +#endif +#if SECOND_CPU + { + .node_id = 1, + .f0 = PCI_DEV(0, 0x19, 0), + .f1 = PCI_DEV(0, 0x19, 1), + .f2 = PCI_DEV(0, 0x19, 2), + .f3 = PCI_DEV(0, 0x19, 3), + .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, + .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, + }, +#endif + }; + + int needs_reset; + unsigned nodeid; + + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + + nodeid = lapicid() & 0xf; + + /* Has this cpu already booted? */ + if (cpu_init_detected(nodeid)) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(nodeid); + if (!boot_cpu()) { + stop_this_cpu(); + } + } + /* Setup the console */ + pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE); + uart_init(); + console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + +#if 0 + print_pci_devices(); +#endif + + setup_ibm_e326_resource_map(); + +#if 0 + print_debug("after setting resource\n"); + print_pci_devices(); +#endif + + needs_reset = setup_coherent_ht_domain(); + needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xA0); + +#if 0 + print_debug("after ht stuff\n"); + print_pci_devices(); +#endif + + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + +#if 0 + print_pci_devices(); +#endif + + enable_smbus(); + +#if 0 + dump_spd_registers(&cpu[0]); +#endif + + memreset_setup(); + sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); + +#if 0 + dump_pci_devices(); +#endif + +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 2)); +#endif + +#if 0 + /* Check the first 1M */ + ram_check(0x00000000, 0x001000000); +#endif +} diff --git a/src/mainboard/ibm/e326/chip.h b/src/mainboard/ibm/e326/chip.h new file mode 100644 index 0000000000..35f10e64cf --- /dev/null +++ b/src/mainboard/ibm/e326/chip.h @@ -0,0 +1,5 @@ +extern struct chip_operations mainboard_ibm_e326_ops; + +struct mainboard_ibm_e326_config { + int nothing; +}; diff --git a/src/mainboard/ibm/e326/cmos.layout b/src/mainboard/ibm/e326/cmos.layout new file mode 100644 index 0000000000..247715e6ac --- /dev/null +++ b/src/mainboard/ibm/e326/cmos.layout @@ -0,0 +1,96 @@ +entries + +#start-bit length config config-ID name +#0 8 r 0 seconds +#8 8 r 0 alarm_seconds +#16 8 r 0 minutes +#24 8 r 0 alarm_minutes +#32 8 r 0 hours +#40 8 r 0 alarm_hours +#48 8 r 0 day_of_week +#56 8 r 0 day_of_month +#64 8 r 0 month +#72 8 r 0 year +#80 4 r 0 rate_select +#84 3 r 0 REF_Clock +#87 1 r 0 UIP +#88 1 r 0 auto_switch_DST +#89 1 r 0 24_hour_mode +#90 1 r 0 binary_values_enable +#91 1 r 0 square-wave_out_enable +#92 1 r 0 update_finished_enable +#93 1 r 0 alarm_interrupt_enable +#94 1 r 0 periodic_interrupt_enable +#95 1 r 0 disable_clock_updates +#96 288 r 0 temporary_filler +0 384 r 0 reserved_memory +384 1 e 4 boot_option +385 1 e 4 last_boot +386 1 e 1 ECC_memory +388 4 r 0 reboot_bits +392 3 e 5 baud_rate +395 1 e 1 hw_scrubber +396 1 e 1 interleave_chip_selects +397 2 e 8 max_mem_clock +400 1 e 1 power_on_after_fail +412 4 e 6 debug_level +416 4 e 7 boot_first +420 4 e 7 boot_second +424 4 e 7 boot_third +428 4 h 0 boot_index +432 8 h 0 boot_countdown +440 4 e 9 slow_cpu +444 1 e 1 nmi +728 256 h 0 user_data +984 16 h 0 check_sum +# Reserve the extended AMD configuration registers +1000 24 r 0 reserved_memory + + + +enumerations + +#ID value text +1 0 Disable +1 1 Enable +2 0 Enable +2 1 Disable +4 0 Fallback +4 1 Normal +5 0 115200 +5 1 57600 +5 2 38400 +5 3 19200 +5 4 9600 +5 5 4800 +5 6 2400 +5 7 1200 +6 6 Notice +6 7 Info +6 8 Debug +6 9 Spew +7 0 Network +7 1 HDD +7 2 Floppy +7 8 Fallback_Network +7 9 Fallback_HDD +7 10 Fallback_Floppy +#7 3 ROM +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz +9 0 off +9 1 87.5% +9 2 75.0% +9 3 62.5% +9 4 50.0% +9 5 37.5% +9 6 25.0% +9 7 12.5% + +checksums + +checksum 392 983 984 + + diff --git a/src/mainboard/ibm/e326/failover.c b/src/mainboard/ibm/e326/failover.c new file mode 100644 index 0000000000..ed5ce32d81 --- /dev/null +++ b/src/mainboard/ibm/e326/failover.c @@ -0,0 +1,72 @@ +#define ASSEMBLY 1 +#include +#include +#include +#include +#include +#include +#include "pc80/mc146818rtc_early.c" +#include "southbridge/amd/amd8111/amd8111_enable_rom.c" +#include "northbridge/amd/amdk8/early_ht.c" +#include "cpu/x86/lapic/boot_cpu.c" +#include "northbridge/amd/amdk8/reset_test.c" + +static unsigned long main(unsigned long bist) +{ + unsigned nodeid; + /* Make cerain my local apic is useable */ + enable_lapic(); + + nodeid = lapicid() & 0xf; + + /* Is this a cpu only reset? */ + if (cpu_init_detected(nodeid)) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto cpu_reset; + } + } + /* Is this a secondary cpu? */ + if (!boot_cpu()) { + if (last_boot_normal()) { + goto normal_image; + } else { + goto fallback_image; + } + } + + + /* Nothing special needs to be done to find bus 0 */ + /* Allow the HT devices to be found */ + enumerate_ht_chain(); + + /* Setup the 8111 */ + amd8111_enable_rom(); + + /* Is this a deliberate reset by the bios */ + if (bios_reset_detected() && last_boot_normal()) { + goto normal_image; + } + /* This is the primary cpu how should I boot? */ + else if (do_normal_boot()) { + goto normal_image; + } + else { + goto fallback_image; + } + normal_image: + asm volatile ("jmp __normal_image" + : /* outputs */ + : "a" (bist) /* inputs */ + : /* clobbers */ + ); + cpu_reset: + asm volatile ("jmp __cpu_reset" + : /* outputs */ + : "a"(bist) /* inputs */ + : /* clobbers */ + ); + fallback_image: + return bist; +} diff --git a/src/mainboard/ibm/e326/irq_tables.c b/src/mainboard/ibm/e326/irq_tables.c new file mode 100644 index 0000000000..f340a2d31e --- /dev/null +++ b/src/mainboard/ibm/e326/irq_tables.c @@ -0,0 +1,61 @@ +#include +#include + +#define IRQ_SLOT_COUNT 12 +#define IRQ_ROUTER_BUS 0 +#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3) +#define IRQ_ROUTER_VENDOR 0x1022 +#define IRQ_ROUTER_DEVICE 0x746b + +#define AVAILABLE_IRQS 0xdef8 +#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \ + { bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \ + {linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0} + +/* Each IRQ_SLOT entry consists of: + * bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu + */ + +const struct irq_routing_table intel_irq_routing_table = { + PIRQ_SIGNATURE, /* u32 signature */ + PIRQ_VERSION, /* u16 version */ + 32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */ + IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */ + IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */ + 0x00, /* IRQs devoted exclusively to PCI usage */ + IRQ_ROUTER_VENDOR, /* Vendor */ + IRQ_ROUTER_DEVICE, /* Device */ + 0x00, /* Crap (miniport) */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ + 0x34, /* u8 checksum , mod 256 checksum must give zero */ + { /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */ + /* Northbridge, Node 0 */ + IRQ_SLOT(0x0, 0x00,0x18,0x0, 0,0,0,0), + /* AMD-8131 PCI-X Bridge */ + IRQ_SLOT(0x0, 0x01,0x01,0x0, 0,0,0,0), + /* Onboard LSI SCSI Controller */ + IRQ_SLOT(0x0, 0x02,0x02,0x0, 3,0,0,0), + /* Onboard Broadcom NICs */ + IRQ_SLOT(0x0, 0x02,0x01,0x0, 1,2,0,0), + /* AMD-8131 PCI-X Bridge */ + IRQ_SLOT(0x0, 0x01,0x02,0x0, 0,0,0,0), + /* PCI Slot 1-2 */ + IRQ_SLOT(0x1, 0x03,0x03,0x0, 1,2,3,4), + IRQ_SLOT(0x2, 0x03,0x04,0x0, 2,3,4,1), + /* AMD-8111 PCI Bridge */ + IRQ_SLOT(0x0, 0x01,0x03,0x0, 0,0,0,0), + /* USB Controller */ + IRQ_SLOT(0x0, 0x04,0x00,0x0, 0,0,0,4), + /* ATI Rage XL VGA */ + IRQ_SLOT(0x0, 0x04,0x05,0x0, 1,0,0,0), + /* AMD-8111 LPC Dridge */ + IRQ_SLOT(0x0, 0x01,0x04,0x0, 0,0,0,0), + /* Northbridge, Node 1 */ + IRQ_SLOT(0x0, 0x00,0x19,0x0, 0,0,0,0), + + } +}; +unsigned long write_pirq_routing_table(unsigned long addr) +{ + return copy_pirq_routing_table(addr); +} diff --git a/src/mainboard/ibm/e326/mainboard.c b/src/mainboard/ibm/e326/mainboard.c new file mode 100644 index 0000000000..9eb3d9ef45 --- /dev/null +++ b/src/mainboard/ibm/e326/mainboard.c @@ -0,0 +1,10 @@ +#include +#include +#include +#include +#include +#include "chip.h" + +struct chip_operations mainboard_ibm_e326_ops = { + CHIP_NAME("IBM E326 mainboard ") +}; diff --git a/src/mainboard/ibm/e326/mptable.c b/src/mainboard/ibm/e326/mptable.c new file mode 100644 index 0000000000..6ad8b945b4 --- /dev/null +++ b/src/mainboard/ibm/e326/mptable.c @@ -0,0 +1,175 @@ +#include +#include +#include +#include +#include + +void *smp_write_config_table(void *v) +{ + static const char sig[4] = "PCMP"; + static const char oem[8] = "IBM "; + static const char productid[12] = "E325 "; + struct mp_config_table *mc; + + unsigned char bus_num; + unsigned char bus_isa; + unsigned char bus_8111_0; + unsigned char bus_8111_1; + unsigned char bus_8131_1; + unsigned char bus_8131_2; + + mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN); + memset(mc, 0, sizeof(*mc)); + + memcpy(mc->mpc_signature, sig, sizeof(sig)); + mc->mpc_length = sizeof(*mc); /* initially just the header */ + mc->mpc_spec = 0x04; + mc->mpc_checksum = 0; /* not yet computed */ + memcpy(mc->mpc_oem, oem, sizeof(oem)); + memcpy(mc->mpc_productid, productid, sizeof(productid)); + mc->mpc_oemptr = 0; + mc->mpc_oemsize = 0; + mc->mpc_entry_count = 0; /* No entries yet... */ + mc->mpc_lapic = LAPIC_ADDR; + mc->mpe_length = 0; + mc->mpe_checksum = 0; + mc->reserved = 0; + + smp_write_processors(mc); + + { + device_t dev; + + /* 8111 */ + dev = dev_find_slot(1, PCI_DEVFN(0x03,0)); + if (dev) { + bus_8111_0 = pci_read_config8(dev, PCI_PRIMARY_BUS); + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; + } else { + printk_debug("ERROR - could not find PCI 1:03.0, using defaults\n"); + bus_8111_1 = 4; + bus_isa = 5; + } + + /* 8131-1 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + + } else { + printk_debug("ERROR - could not find PCI 1:01.0, using defaults\n"); + bus_8131_1 = 2; + } + + /* 8131-2 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk_debug("ERROR - could not find PCI 1:02.0, using defaults\n"); + bus_8131_2 = 3; + } + } + + /* define bus and isa numbers */ + for (bus_num = 0; bus_num < bus_isa; bus_num++) { + smp_write_bus(mc, bus_num, "PCI "); + } + smp_write_bus(mc, bus_isa, "ISA "); + + /* Legacy IOAPIC #2 */ + smp_write_ioapic(mc, 2, 0x11, 0xfec00000); + { + device_t dev; + struct resource *res; + /* 8131-1 apic #3 */ + dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } + } + /* 8131-2 apic #4 */ + dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); + if (dev) { + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } + } + } + + /* ISA backward compatibility interrupts */ + smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x00); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x01, 0x02, 0x01); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, 0x02, 0x02); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x03, 0x02, 0x03); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x04, 0x02, 0x04); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x05, 0x02, 0x05); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x06, 0x02, 0x06); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x07, 0x02, 0x07); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x08, 0x02, 0x08); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x09, 0x02, 0x09); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0a, 0x02, 0x0a); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0b, 0x02, 0x0b); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0c, 0x02, 0x0c); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0d, 0x02, 0x0d); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0e, 0x02, 0x0e); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x0f, 0x02, 0x0f); + + /* PCI Ints: Type Polarity Trigger Bus ID PCIDEVNUM|IRQ APIC ID PIN# */ + /* Integrated SMBus 2.0 */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|3, 0x2, 0x13); + /* Integrated AMD AC97 Audio */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_0, (0x04<<2)|1, 0x2, 0x11); + + /* Integrated AMD USB */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x00<<2)|3, 0x2, 0x13); + + /* On board ATI Rage XL */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8111_1, (0x05<<2)|0, 0x2, 0x10); + + /* On board Broadcom nics */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|0, 0x3, 0x00); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x01<<2)|1, 0x3, 0x01); + + /* On board LSI SCSI */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_1, (0x02<<2)|0, 0x3, 0x02); + + /* PCI Slot 1 PCIX */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|0, 0x2, 0x10); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|1, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|2, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x03<<2)|3, 0x2, 0x13); + + /* PCI Slot 2 PCIX */ + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|0, 0x2, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|1, 0x2, 0x12); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|2, 0x2, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_8131_2, (0x04<<2)|3, 0x2, 0x10); + + /* Standard local interrupt assignments: + * Type Polarity Trigger Bus ID IRQ APIC ID PIN# */ + smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x00); + smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, bus_isa, 0x00, MP_APIC_ALL, 0x01); + + /* There is no extension information... */ + + /* Compute the checksums */ + mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); + mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); + printk_debug("Wrote the mp table end at: %p - %p\n", + mc, smp_next_mpe_entry(mc)); + return smp_next_mpe_entry(mc); +} + +unsigned long write_smp_table(unsigned long addr) +{ + void *v; + v = smp_write_floating_table(addr); + return (unsigned long)smp_write_config_table(v); +} + diff --git a/src/mainboard/ibm/e326/resourcemap.c b/src/mainboard/ibm/e326/resourcemap.c new file mode 100644 index 0000000000..8a19d786b6 --- /dev/null +++ b/src/mainboard/ibm/e326/resourcemap.c @@ -0,0 +1,271 @@ +/* + * IBM E325 needs a different resource map + * + */ + +static void setup_ibm_e326_resource_map(void) +{ + static const unsigned int register_values[] = { + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + /* Memory-Mapped I/O Limit i Registers + * F1:0x84 i = 0 + * F1:0x8C i = 1 + * F1:0x94 i = 2 + * F1:0x9C i = 3 + * F1:0xA4 i = 4 + * F1:0xAC i = 5 + * F1:0xB4 i = 6 + * F1:0xBC i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = Reserved + * [ 6: 6] Reserved + * [ 7: 7] Non-Posted + * 0 = CPU writes may be posted + * 1 = CPU writes must be non-posted + * [31: 8] Memory-Mapped I/O Limit Address i (39-16) + * This field defines the upp adddress bits of a 40-bit address that + * defines the end of a memory-mapped I/O region n + */ + /* Memory-Mapped I/O Base i Registers + * F1:0x80 i = 0 + * F1:0x88 i = 1 + * F1:0x90 i = 2 + * F1:0x98 i = 3 + * F1:0xA0 i = 4 + * F1:0xA8 i = 5 + * F1:0xB0 i = 6 + * F1:0xB8 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes disabled + * 1 = Writes Enabled + * [ 2: 2] Cpu Disable + * 0 = Cpu can use this I/O range + * 1 = Cpu requests do not use this I/O range + * [ 3: 3] Lock + * 0 = base/limit registers i are read/write + * 1 = base/limit registers i are read-only + * [ 7: 4] Reserved + * [31: 8] Memory-Mapped I/O Base Address i (39-16) + * This field defines the upper address bits of a 40bit address + * that defines the start of memory-mapped I/O region i + */ + + PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0xfe2f10, + PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0xfc0003, + //PCI_ADDR(0, 0x18, 1, 0xbc), 0x48, 0x0, + // PCI_ADDR(0, 0x18, 1, 0xb8), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0xfec010, + PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0xfec003, + //PCI_ADDR(0, 0x18, 1, 0xb4), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xb0), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0xb10, + PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0xa03, + //PCI_ADDR(0, 0x18, 1, 0xac), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xa8), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0xfed010, + PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0xfed003, + //PCI_ADDR(0, 0x18, 1, 0xa4), 0x48, 0x0, + //PCI_ADDR(0, 0x18, 1, 0xa0), 0xf0, 0x0, + + PCI_ADDR(0, 0x18, 1, 0x9c), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x98), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x94), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x90), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x8c), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x88), 0xf0, 0x0, + PCI_ADDR(0, 0x18, 1, 0x84), 0x48, 0x0, + PCI_ADDR(0, 0x18, 1, 0x80), 0xf0, 0x0, + /* PCI I/O Limit i Registers + * F1:0xC4 i = 0 + * F1:0xCC i = 1 + * F1:0xD4 i = 2 + * F1:0xDC i = 3 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 3: 3] Reserved + * [ 5: 4] Destination Link ID + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 = reserved + * [11: 6] Reserved + * [24:12] PCI I/O Limit Address i + * This field defines the end of PCI I/O region n + * [31:25] Reserved + */ + /* PCI I/O Base i Registers + * F1:0xC0 i = 0 + * F1:0xC8 i = 1 + * F1:0xD0 i = 2 + * F1:0xD8 i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 3: 2] Reserved + * [ 4: 4] VGA Enable + * 0 = VGA matches Disabled + * 1 = matches all address < 64K and where A[9:0] is in the + * range 3B0-3BB or 3C0-3DF independen of the base & limit registers + * [ 5: 5] ISA Enable + * 0 = ISA matches Disabled + * 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block + * from matching agains this base/limit pair + * [11: 6] Reserved + * [24:12] PCI I/O Base i + * This field defines the start of PCI I/O region n + * [31:25] Reserved + */ + PCI_ADDR(0, 0x18, 1, 0xdc), 0xFE000FC8, 0x1fff010, + PCI_ADDR(0, 0x18, 1, 0xd8), 0xFE000FCC, 0x33, + PCI_ADDR(0, 0x18, 1, 0xd4), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xd0), 0xFE000FCC, 0x0, + PCI_ADDR(0, 0x18, 1, 0xcc), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc8), 0xFE000FCC, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc4), 0xFE000FC8, 0x0, + PCI_ADDR(0, 0x18, 1, 0xc0), 0xFE000FCC, 0x0, + /* Config Base and Limit i Registers + * F1:0xE0 i = 0 + * F1:0xE4 i = 1 + * F1:0xE8 i = 2 + * F1:0xEC i = 3 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 2: 2] Device Number Compare Enable + * 0 = The ranges are based on bus number + * 1 = The ranges are ranges of devices on bus 0 + * [ 3: 3] Reserved + * [ 6: 4] Destination Node + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 7] Reserved + * [ 9: 8] Destination Link + * 00 = Link 0 + * 01 = Link 1 + * 10 = Link 2 + * 11 - Reserved + * [15:10] Reserved + * [23:16] Bus Number Base i + * This field defines the lowest bus number in configuration region i + * [31:24] Bus Number Limit i + * This field defines the highest bus number in configuration regin i + */ + PCI_ADDR(0, 0x18, 1, 0xe0), 0x0000FC88, 0xff040103, + PCI_ADDR(0, 0x18, 1, 0xe4), 0x0000FC88, 0, + PCI_ADDR(0, 0x18, 1, 0xe8), 0x0000FC88, 0, + PCI_ADDR(0, 0x18, 1, 0xec), 0x0000FC88, 0, + }; + int max; + max = sizeof(register_values)/sizeof(register_values[0]); + setup_resource_map(register_values, max); +}