GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

sb/intel/i82801gx: Clean up sata.c 

This tidies up the setting of the PCS register.
An assumption is made that bit 4 of this register is read-only,
which according to the ICH7 datasheet, it is.

Change-Id: Ia9b7d38a87e26236f6ebc951c169cae12b13139f
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Reviewed-on: https://review.coreboot.org/13015
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins)
This commit is contained in:
Damien Zammit 2016-01-16 02:52:53 +11:00 committed by Nico Huber
parent 19bb1391bf
commit 1533f13d43
1 changed files with 5 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
src/southbridge/intel/i82801gx/sata.c
View File

@ -116,8 +116,8 @@ static void sata_init(struct device *dev)
/* Combine IDE - SATA configuration */
pci_write_config8(dev, SATA_MAP, 0x02);
/* Port 0 & 1 enable */
pci_write_config8(dev, SATA_PCS, 0x0f);
/* Restrict ports - 0 and 2 only available */
ports &= 0x5;
} else if(config->sata_ahci) {
printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n");
/* Allow both Legacy and Native mode */
@ -127,12 +127,6 @@ static void sata_init(struct device *dev)
/* Interrupt Pin is set by D31IP.PIP */
pci_write_config8(dev, INTR_LN, 0x0a);
/* In ACHI mode, bit[3:0] must always be set
* (Port status is controlled through AHCI BAR)
* Different settings for different controller models.
*/
pci_write_config8(dev, SATA_PCS, ports);
ahci_bar = (u32 *)(pci_read_config32(dev, 0x27) & ~0x3ff);
ahci_bar[3] = config->sata_ports_implemented;
} else {
@ -172,11 +166,11 @@ static void sata_init(struct device *dev)
/* Set IDE I/O Configuration */
reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0;
pci_write_config32(dev, IDE_CONFIG, reg32);
/* Port 0 & 1 enable XXX */
pci_write_config8(dev, SATA_PCS, 0x15);
}
/* Set port control */
pci_write_config8(dev, SATA_PCS, ports);
/* Enable clock gating for unused ports and set initialization reg */
pci_write_config32(dev, SATA_IR, SIF3(ports) | SIF2 | SIF1 | SCRE);