Various Kconfig fixes and improvements:
- Add helps texts to multiple user-visible Kconfig options. - Improve some menu and option names. - PAYLOAD_NONE should come before PAYLOAD_ELF, so that you scroll down (instead of up) when changing "no payload" to "ELF payload" (more intuitive, IMHO). - s/cbfs/cbfstool/. - Add some TODO items where needed. - Put GDB_STUB in a "Debugging" menu, no options should be top-level. There'll be more debug options later, I'm pretty sure. - Start converting help texts which are not user-visible to #-comments. - Re-order some options for more intuitive menus. - Set ARCH_X86 and ARCH_POWERPC to "default n", each boards selects them. - "Maximum reboot count" should proabably not be user-selectable, or at most if CONFIG_EXPERT (yet to be added) is enabled. It does definately not need its own "Misc options" menu. - Set PCI_ROM_RUN and VGA_ROM_RUN to "default y", most users will want to run option ROMs. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4734 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann
parent
dd56514502
commit
168b11bc41
62
src/Kconfig
62
src/Kconfig
|
|
@ -30,10 +30,15 @@ mainmenu "Coreboot Configuration"
|
|||
menu "General setup"
|
||||
|
||||
config LOCALVERSION
|
||||
string "Local version - append to coreboot release"
|
||||
string "Local version string"
|
||||
help
|
||||
Append an extra string to the end of the coreboot version.
|
||||
|
||||
This can be useful if, for instance, you want to append the
|
||||
respective board's hostname or some other identifying string to
|
||||
the coreboot version number, so that you can easily distinguish
|
||||
boot logs of different boards from each other.
|
||||
|
||||
endmenu
|
||||
|
||||
source src/mainboard/Kconfig
|
||||
|
|
@ -228,7 +233,7 @@ config GFXUMA
|
|||
#
|
||||
# endmenu
|
||||
|
||||
menu "Generated System Tables"
|
||||
menu "System tables"
|
||||
|
||||
config HAVE_LOW_TABLES
|
||||
bool
|
||||
|
|
@ -239,7 +244,7 @@ config HAVE_HIGH_TABLES
|
|||
default y
|
||||
|
||||
config MULTIBOOT
|
||||
bool "Add Multiboot tables (for grub2)"
|
||||
bool "Generate Multiboot tables (for GRUB2)"
|
||||
default n
|
||||
|
||||
config HAVE_ACPI_TABLES
|
||||
|
|
@ -258,16 +263,22 @@ endmenu
|
|||
|
||||
menu "Payload"
|
||||
|
||||
config COMPRESSED_PAYLOAD_LZMA
|
||||
bool "Use LZMA compression for payloads"
|
||||
default yes
|
||||
|
||||
choice
|
||||
prompt "Payload type"
|
||||
prompt "Add a payload"
|
||||
default PAYLOAD_NONE
|
||||
|
||||
config PAYLOAD_NONE
|
||||
bool "None"
|
||||
help
|
||||
Select this option if you want to create an "empty" coreboot
|
||||
ROM image for a certain mainboard, i.e. a coreboot ROM image
|
||||
which does not yet contain a payload.
|
||||
|
||||
For such an image to be useful, you have to use 'cbfstool'
|
||||
to add a payload to the ROM image later.
|
||||
|
||||
config PAYLOAD_ELF
|
||||
bool "An ELF executable payload file"
|
||||
bool "An ELF executable payload"
|
||||
help
|
||||
Select this option if you have a payload image (an ELF file)
|
||||
which coreboot should run as soon as the basic hardware
|
||||
|
|
@ -275,15 +286,6 @@ config PAYLOAD_ELF
|
|||
|
||||
You will be able to specify the location and file name of the
|
||||
payload image later.
|
||||
config PAYLOAD_NONE
|
||||
bool "No payload"
|
||||
help
|
||||
Select this option if you want to create an "empty" coreboot
|
||||
ROM image for a certain mainboard, i.e. a coreboot ROM image
|
||||
which does not yet contain a payload.
|
||||
|
||||
For such an image to be useful, you have to use the 'cbfs' tool
|
||||
to add a payload to the ROM image later.
|
||||
|
||||
endchoice
|
||||
|
||||
|
|
@ -294,6 +296,15 @@ config FALLBACK_PAYLOAD_FILE
|
|||
help
|
||||
The path and filename of the ELF executable file to use as payload.
|
||||
|
||||
# TODO: Defined if no payload? Breaks build?
|
||||
config COMPRESSED_PAYLOAD_LZMA
|
||||
bool "Use LZMA compression for payloads"
|
||||
default y
|
||||
depends on PAYLOAD_ELF
|
||||
help
|
||||
In order to reduce the size payloads take up in the ROM chip
|
||||
coreboot can compress them using the LZMA algorithm.
|
||||
|
||||
endmenu
|
||||
|
||||
menu "VGA BIOS"
|
||||
|
|
@ -319,11 +330,20 @@ config FALLBACK_VGA_BIOS_ID
|
|||
depends on VGA_BIOS
|
||||
default "1106,3230"
|
||||
help
|
||||
The ID that would associate your VGA BIOS to your video card.
|
||||
(PCI VendorID, PCI Device ID)
|
||||
The comma-separated PCI vendor and device ID that would associate
|
||||
your VGA BIOS to your video card.
|
||||
|
||||
Example: 1106,3230
|
||||
|
||||
In the above example 1106 is the PCI vendor ID (in hex, but without
|
||||
the "0x" prefix) and 3230 specifies the PCI device ID of the
|
||||
video card (also in hex, without "0x" prefix).
|
||||
|
||||
endmenu
|
||||
|
||||
menu "Debugging"
|
||||
|
||||
# TODO: Better help text and detailed instructions.
|
||||
config GDB_STUB
|
||||
bool "GDB debugging support"
|
||||
default y
|
||||
|
|
@ -331,3 +351,5 @@ config GDB_STUB
|
|||
If enabled, you will be able to set breakpoints for gdb debugging.
|
||||
See src/arch/i386/lib/c_start.S for details.
|
||||
|
||||
endmenu
|
||||
|
||||
|
|
|
|||
|
|
@ -1,23 +1,22 @@
|
|||
# This option is used to set the architecture of a mainboard to X86.
|
||||
# It is usually set in mainboard/*/Kconfig.
|
||||
config ARCH_X86
|
||||
bool
|
||||
help
|
||||
This option is used to set the architecture of a mainboard.
|
||||
It is usually set in mainboard/*/Kconfig.
|
||||
default n
|
||||
|
||||
# This is an SMP option. It relates to starting up APs.
|
||||
# It is usually set in mainboard/*/Kconfig.
|
||||
# TODO: Improve description.
|
||||
config AP_IN_SIPI_WAIT
|
||||
bool
|
||||
default n
|
||||
depends on ARCH_X86
|
||||
help
|
||||
This is an SMP option. It relates to starting up APs.
|
||||
It is usually set in mainboard/*/Kconfig.
|
||||
|
||||
# This is the name of the respective architecture subdirectory in arch/.
|
||||
config ARCH
|
||||
string
|
||||
default i386
|
||||
depends on ARCH_X86
|
||||
help
|
||||
This is the name of the respective subdirectory in arch/.
|
||||
|
||||
config ROMBASE
|
||||
hex
|
||||
|
|
@ -58,11 +57,9 @@ config STACK_SIZE
|
|||
hex
|
||||
default 0x8000
|
||||
|
||||
menu "Misc options"
|
||||
|
||||
# Maximum reboot count
|
||||
# TODO: Improve description.
|
||||
config MAX_REBOOT_CNT
|
||||
int "Maximum reboot count"
|
||||
int
|
||||
default 3
|
||||
|
||||
endmenu
|
||||
|
||||
|
|
|
|||
|
|
@ -1,13 +1,12 @@
|
|||
# This option is used to set the architecture of a mainboard to PowerPC.
|
||||
# It is usually set in mainboard/*/Kconfig.
|
||||
config ARCH_POWERPC
|
||||
bool
|
||||
help
|
||||
This option is used to set the architecture of a mainboard.
|
||||
It is usually set in mainboard/*/Kconfig.
|
||||
default n
|
||||
|
||||
# This is the name of the respective architecture subdirectory in arch/.
|
||||
config ARCH
|
||||
string
|
||||
default ppc
|
||||
depends on ARCH_POWERPC
|
||||
help
|
||||
This is the name of the respective subdirectory in arch/.
|
||||
|
||||
|
|
|
|||
|
|
@ -1,53 +1,96 @@
|
|||
menu "Console options"
|
||||
|
||||
# TODO: Rename to SERIAL_CONSOLE once Kconfig transition is complete.
|
||||
config CONSOLE_SERIAL8250
|
||||
#TODO Rename to SERIAL_CONSOLE once Kconfig transition is complete.
|
||||
bool "See output on the serial port console"
|
||||
bool "Enable serial port console output"
|
||||
default y
|
||||
help
|
||||
Send coreboot debug output to a serial port console.
|
||||
|
||||
config SERIAL_POST
|
||||
bool "See POST output on the serial port console"
|
||||
default n
|
||||
|
||||
# TODO: COM1, COM2 etc.
|
||||
config TTYS0_BASE
|
||||
hex "I/O base for the serial port"
|
||||
depends on CONSOLE_SERIAL8250
|
||||
default 0x3f8
|
||||
|
||||
config SERIAL_SET_SPEED
|
||||
bool "Override the serial console BAUD rate"
|
||||
bool "Override the serial port BAUD rate"
|
||||
default y
|
||||
depends on CONSOLE_SERIAL8250
|
||||
|
||||
config TTYS0_BAUD
|
||||
int "Serial console BAUD rate"
|
||||
int "Serial port BAUD rate"
|
||||
depends on SERIAL_SET_SPEED
|
||||
default 115200
|
||||
|
||||
# TODO: Allow user-friendly selection of settings other than 8n1.
|
||||
config TTYS0_LCS
|
||||
int
|
||||
default 3
|
||||
depends on CONSOLE_SERIAL8250
|
||||
|
||||
config USBDEBUG_DIRECT
|
||||
bool "USB debug dongle support. Not supported on all chipsets."
|
||||
config SERIAL_POST
|
||||
bool "Enable POST output on the serial port console"
|
||||
depends on CONSOLE_SERIAL8250
|
||||
default n
|
||||
help
|
||||
If enabled, coreboot will additionally print POST codes (which are
|
||||
usually displayed using a so-called "POST card" ISA/PCI/PCI-E
|
||||
device) on the serial console.
|
||||
|
||||
# TODO: FIX DEPENDENCY HERE
|
||||
config USBDEBUG_DIRECT
|
||||
bool "USB 2.0 EHCI debug dongle support"
|
||||
default n
|
||||
help
|
||||
This option allows you to use a so-called USB EHCI Debug device
|
||||
to retrieve the coreboot debug messages (instead, or in addition
|
||||
to, a serial port).
|
||||
|
||||
This feature is NOT supported on all chipsets in coreboot!
|
||||
|
||||
It also requires a USB2 controller which supports the EHCI
|
||||
Debug Port capability. Controllers which are known to work:
|
||||
|
||||
* 10b9:5239 ALi Corporation USB 2.0 (USB PCI card)
|
||||
* 8086:24cd Intel ICH4/ICH4-M
|
||||
* 8086:24dd Intel ICH5
|
||||
* 8086:265c Intel ICH6
|
||||
* 8086:268c Intel 631xESB/632xESB/3100
|
||||
* 8086:27cc Intel ICH7
|
||||
* 8086:2836 Intel ICH8
|
||||
* 8086:283a Intel ICH8
|
||||
* 8086:293a Intel ICH9
|
||||
* 10de:0088 NVIDIA MCP2A
|
||||
* 10de:005b NVIDIA CK804
|
||||
* 10de:026e NVIDIA MCP51
|
||||
* 10de:036d NVIDIA MCP55
|
||||
* 10de:03f2 NVIDIA MCP61
|
||||
* 1002:4386 ATI/AMD SB600
|
||||
* 1106:3104 VIA VX800
|
||||
|
||||
See http://www.coreboot.org/EHCI_Debug_Port for an up-to-date list.
|
||||
|
||||
config CONSOLE_VGA
|
||||
bool "Use VGA console, once initialized."
|
||||
bool "Use VGA console once initialized"
|
||||
default n
|
||||
|
||||
# TODO: Deps?
|
||||
# TODO: Improve description.
|
||||
config CONSOLE_VGA_ONBOARD_AT_FIRST
|
||||
bool "Use onboard VGA as primary"
|
||||
bool "Use onboard VGA as primary video device"
|
||||
default n
|
||||
help
|
||||
If not selected, the last adapter found will be used.
|
||||
|
||||
# TODO: User-friendly "choice" selection.
|
||||
# TODO: Add help text.
|
||||
config MAXIMUM_CONSOLE_LOGLEVEL
|
||||
int "Maximum console loglevel"
|
||||
default 9
|
||||
|
||||
# TODO: User-friendly "choice" selection.
|
||||
# TODO: Add help text.
|
||||
config DEFAULT_CONSOLE_LOGLEVEL
|
||||
int "Default console loglevel"
|
||||
default 9
|
||||
|
|
|
|||
|
|
@ -27,40 +27,55 @@ config VGA_BRIDGE_SETUP
|
|||
Allow bridges to set up legacy decoding ranges for VGA. Don't disable
|
||||
this unless you're sure you don't want the briges setup for VGA.
|
||||
|
||||
# TODO: Explain differences (if any) for onboard cards.
|
||||
config VGA_ROM_RUN
|
||||
bool "Run VGA Option ROMs"
|
||||
bool "Run VGA option ROMs"
|
||||
default y
|
||||
help
|
||||
Execute VGA option ROMs if found. This is required to enable PCI/AGP
|
||||
VGA plugin cards.
|
||||
Execute VGA option ROMs, if found. This is required to enable
|
||||
PCI/AGP/PCI-E video cards.
|
||||
|
||||
config PCI_ROM_RUN
|
||||
bool "Run non-VGA Option ROMs"
|
||||
bool "Run non-VGA option ROMs"
|
||||
default y
|
||||
help
|
||||
Execute non-VGA PCI option ROMs if found.
|
||||
Execute non-VGA PCI option ROMs, if found.
|
||||
|
||||
Examples include IDE/SATA controller option ROMs and option ROMs
|
||||
for network cards (NICs).
|
||||
|
||||
# TODO: Describe YABEL vs. x86emu differences in more detail.
|
||||
choice
|
||||
prompt "Option ROM Execution"
|
||||
prompt "Option ROM execution type"
|
||||
default PCI_OPTION_ROM_RUN_REALMODE
|
||||
depends on PCI_ROM_RUN || VGA_ROM_RUN
|
||||
help
|
||||
You can choose to execute PCI option ROMs natively (32bit x86 system
|
||||
required) or in an emulator (x86emu or YABEL).
|
||||
|
||||
config PCI_OPTION_ROM_RUN_REALMODE
|
||||
prompt "Real mode"
|
||||
bool
|
||||
help
|
||||
If you select this option, PCI option ROMs will be executed
|
||||
natively on the hardware (a 32bit x86 system is required).
|
||||
|
||||
config PCI_OPTION_ROM_RUN_YABEL
|
||||
prompt "YABEL"
|
||||
bool
|
||||
help
|
||||
If you select this option, the YABEL BIOS emulator will be used to
|
||||
execute PCI option ROMs.
|
||||
|
||||
config PCI_OPTION_ROM_RUN_X86EMU
|
||||
prompt "X86EMU"
|
||||
prompt "x86emu"
|
||||
bool
|
||||
help
|
||||
If you select this option, the x86emu BIOS emulator will be used to
|
||||
execute PCI option ROMs.
|
||||
|
||||
endchoice
|
||||
|
||||
# TODO: Describe better, and/or make a "choice" selection for this.
|
||||
config YABEL_DEBUG_FLAGS
|
||||
prompt "Hex value for debug flags"
|
||||
prompt "Hex value for YABEL debug flags"
|
||||
hex
|
||||
default 0x0
|
||||
depends on PCI_OPTION_ROM_RUN_YABEL
|
||||
|
|
|
|||
|
|
@ -370,9 +370,15 @@ source "src/mainboard/thomson/Kconfig"
|
|||
source "src/mainboard/tyan/Kconfig"
|
||||
source "src/mainboard/via/Kconfig"
|
||||
|
||||
# TODO: No help text possible for choice fields?
|
||||
choice
|
||||
prompt "ROM chip size"
|
||||
default COREBOOT_ROMSIZE_KB_256
|
||||
help
|
||||
Select the size of the ROM chip you intend to flash coreboot on.
|
||||
|
||||
The build system will take care of creating a coreboot.rom file
|
||||
of the matching size.
|
||||
|
||||
config COREBOOT_ROMSIZE_KB_128
|
||||
bool "128 KB"
|
||||
|
|
@ -406,6 +412,7 @@ config COREBOOT_ROMSIZE_KB_4096
|
|||
|
||||
endchoice
|
||||
|
||||
# Map the config names to an integer (KB).
|
||||
config COREBOOT_ROMSIZE_KB
|
||||
int
|
||||
default 128 if COREBOOT_ROMSIZE_KB_128
|
||||
|
|
@ -414,9 +421,8 @@ config COREBOOT_ROMSIZE_KB
|
|||
default 1024 if COREBOOT_ROMSIZE_KB_1024
|
||||
default 2048 if COREBOOT_ROMSIZE_KB_2048
|
||||
default 4096 if COREBOOT_ROMSIZE_KB_4096
|
||||
help
|
||||
Map the config names to an integer.
|
||||
|
||||
# Map the config names to a hex value (bytes).
|
||||
config ROM_SIZE
|
||||
hex
|
||||
default 0x20000 if COREBOOT_ROMSIZE_KB_128
|
||||
|
|
|
|||
Loading…
Reference in New Issue