src/drivers: Fix typo

Change-Id: I9144937b72a98517cbd41c093cff7bad543b4140
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/27916
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Elyes HAOUAS 2018-08-07 12:23:16 +02:00 committed by Martin Roth
parent 5cdd9aab34
commit 1895838e7a
15 changed files with 18 additions and 18 deletions

View File

@ -91,7 +91,7 @@ AGESA_STATUS agesa_Reset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
// //
// Perform the RESET based upon the ResetType. In case of // Perform the RESET based upon the ResetType. In case of
// WARM_RESET_WHENVER and COLD_RESET_WHENEVER, the request will go to // WARM_RESET_WHENEVER and COLD_RESET_WHENEVER, the request will go to
// AmdResetManager. During the critical condition, where reset is required // AmdResetManager. During the critical condition, where reset is required
// immediately, the reset will be invoked directly by writing 0x04 to port // immediately, the reset will be invoked directly by writing 0x04 to port
// 0xCF9 (Reset Port). // 0xCF9 (Reset Port).

View File

@ -670,7 +670,7 @@ static int elog_find_flash(void)
} }
if (region_device_sz(rdev) < 4*KiB) { if (region_device_sz(rdev) < 4*KiB) {
printk(BIOS_WARNING, "ELOG: Needs a minium size of 4KiB: %zu\n", printk(BIOS_WARNING, "ELOG: Needs a minimum size of 4KiB: %zu\n",
region_device_sz(rdev)); region_device_sz(rdev));
return -1; return -1;
} }

View File

@ -360,7 +360,7 @@ static int _dw_i2c_transfer(unsigned int bus, const struct i2c_msg *segments,
} }
/* The assumption is that the host controller is disabled -- either /* The assumption is that the host controller is disabled -- either
after running this function or from performing the intialization after running this function or from performing the initialization
sequence in dw_i2c_init(). */ sequence in dw_i2c_init(). */
/* Set target slave address */ /* Set target slave address */

View File

@ -35,7 +35,7 @@ struct drivers_i2c_generic_config {
struct acpi_gpio irq_gpio; struct acpi_gpio irq_gpio;
/* /*
* This flag will add a device propery which will indicate * This flag will add a device property which will indicate
* to the OS that it should probe this device before adding it. * to the OS that it should probe this device before adding it.
* *
* This can be used to declare a device that may not exist on * This can be used to declare a device that may not exist on

View File

@ -74,7 +74,7 @@
#define LP55231_RESET_VALUE 0xff #define LP55231_RESET_VALUE 0xff
/* /*
* The controller has 192 bytes of SRAM for code/data, availabe as six 32 byte * The controller has 192 bytes of SRAM for code/data, available as six 32 byte
* pages. * pages.
*/ */
#define LP55231_PROG_PAGE_SIZE 32 #define LP55231_PROG_PAGE_SIZE 32
@ -119,7 +119,7 @@ static int ledc_transfer(TiLp55231 *ledc, struct i2c_msg *segs,
while (max_attempts--) { while (max_attempts--) {
rv = i2c_transfer(ledc->i2c_bus, segs, seg_count); rv = i2c_transfer(ledc->i2c_bus, segs, seg_count);
/* Accessing reset regsiter is expected to fail. */ /* Accessing reset register is expected to fail. */
if (!rv || reset) if (!rv || reset)
break; break;
} }

View File

@ -128,7 +128,7 @@ void romstage_common(struct romstage_params *params)
params->pei_data->saved_data_size = params->pei_data->saved_data_size =
region_device_sz(&rdev); region_device_sz(&rdev);
params->pei_data->saved_data = rdev_mmap_full(&rdev); params->pei_data->saved_data = rdev_mmap_full(&rdev);
/* Assum boot device is memory mapped. */ /* Assume boot device is memory mapped. */
assert(IS_ENABLED(CONFIG_BOOT_DEVICE_MEMORY_MAPPED)); assert(IS_ENABLED(CONFIG_BOOT_DEVICE_MEMORY_MAPPED));
} else if (params->pei_data->boot_mode == ACPI_S3) { } else if (params->pei_data->boot_mode == ACPI_S3) {
/* Waking from S3 and no cache. */ /* Waking from S3 and no cache. */

View File

@ -36,7 +36,7 @@ void fsp_debug_before_memory_init(fsp_memory_init_fn memory_init,
if (IS_ENABLED(CONFIG_DISPLAY_UPD_DATA)) if (IS_ENABLED(CONFIG_DISPLAY_UPD_DATA))
fspm_display_upd_values(fspm_old_upd, fspm_new_upd); fspm_display_upd_values(fspm_old_upd, fspm_new_upd);
/* Display the call entry point and paramters */ /* Display the call entry point and parameters */
if (!IS_ENABLED(CONFIG_DISPLAY_FSP_CALLS_AND_STATUS)) if (!IS_ENABLED(CONFIG_DISPLAY_FSP_CALLS_AND_STATUS))
return; return;
printk(BIOS_SPEW, "Calling FspMemoryInit: 0x%p\n", memory_init); printk(BIOS_SPEW, "Calling FspMemoryInit: 0x%p\n", memory_init);

View File

@ -107,7 +107,7 @@ void soc_update_memory_params_for_mma(FSP_M_CONFIG *memory_cfg,
* *
* This function is responsible for loading and executing the notify code from * This function is responsible for loading and executing the notify code from
* the FSP-S binary. It expects that fsp_silicon_init() has already been called * the FSP-S binary. It expects that fsp_silicon_init() has already been called
* succesfully, and that the FSP-S binary is still loaded into memory. * successfully, and that the FSP-S binary is still loaded into memory.
*/ */
#endif /* _FSP2_0_API_H_ */ #endif /* _FSP2_0_API_H_ */

View File

@ -609,7 +609,7 @@
#define LM_FIFO_WATERMARK 0x0000001F #define LM_FIFO_WATERMARK 0x0000001F
#define MI_ARB_STATE 0x020e4 /* 915+ only */ #define MI_ARB_STATE 0x020e4 /* 915+ only */
/* Make render/texture TLB fetches lower priorty than associated data /* Make render/texture TLB fetches lower priority than associated data
* fetches. This is not turned on by default * fetches. This is not turned on by default
*/ */
#define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15) #define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15)
@ -1636,9 +1636,9 @@
#define BLM_PIPE_C (2 << 29) /* ivb + */ #define BLM_PIPE_C (2 << 29) /* ivb + */
#define BLM_PIPE(pipe) ((pipe) << 29) #define BLM_PIPE(pipe) ((pipe) << 29)
#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ #define BLM_POLARITY_I965 (1 << 28) /* gen4 only */
#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) #define BLM_PHASE_IN_INTERRUPT_STATUS (1 << 26)
#define BLM_PHASE_IN_ENABLE (1 << 25) #define BLM_PHASE_IN_ENABLE (1 << 25)
#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) #define BLM_PHASE_IN_INTERRUPT_ENABL (1 << 24)
#define BLM_PHASE_IN_TIME_BASE_SHIFT (16) #define BLM_PHASE_IN_TIME_BASE_SHIFT (16)
#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) #define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16)
#define BLM_PHASE_IN_COUNT_SHIFT (8) #define BLM_PHASE_IN_COUNT_SHIFT (8)

View File

@ -318,7 +318,7 @@ intel_gma_init_igd_opregion(igd_opregion_t *opregion)
opregion->header.size = sizeof(igd_opregion_t) / 1024; opregion->header.size = sizeof(igd_opregion_t) / 1024;
/* /*
* Left-shift version field to accomodate Intel Windows driver quirk * Left-shift version field to accommodate Intel Windows driver quirk
* when not using a VBIOS. * when not using a VBIOS.
* Required for Legacy boot + NGI, UEFI + NGI, and UEFI + GOP driver. * Required for Legacy boot + NGI, UEFI + NGI, and UEFI + GOP driver.
* *

View File

@ -227,7 +227,7 @@ enum {
/* /*
* MAX77802_REG_PMIC_BBAT set to * MAX77802_REG_PMIC_BBAT set to
* Back up batery charger on and * Back up battery charger on and
* limit voltage setting to 3.5v * limit voltage setting to 3.5v
*/ */
#define MAX77802_BBCHOSTEN (1 << 0) #define MAX77802_BBCHOSTEN (1 << 0)

View File

@ -19,7 +19,7 @@ struct drivers_net_config {
unsigned wake; /* Wake pin for ACPI _PRW */ unsigned wake; /* Wake pin for ACPI _PRW */
/* /*
* There maybe many NIC cards in a system. * There maybe many NIC cards in a system.
* This paramter is for driver to identify what * This parameter is for driver to identify what
* the device number is and the valid range is [1-10]. * the device number is and the valid range is [1-10].
*/ */
uint8_t device_index; uint8_t device_index;

View File

@ -743,7 +743,7 @@ static int tis_setup_interrupt(int vector, int polarity)
/* Set TPM interrupt vector */ /* Set TPM interrupt vector */
tpm_write_int_vector(vector, locality); tpm_write_int_vector(vector, locality);
/* Set TPM interupt polarity and disable interrupts */ /* Set TPM interrupt polarity and disable interrupts */
tpm_write_int_polarity(polarity, locality); tpm_write_int_polarity(polarity, locality);
/* Close connection if it was opened */ /* Close connection if it was opened */

View File

@ -29,7 +29,7 @@ enum TPS65913_RTC_REG {
TPS65913_WEEKS_REG = 0x06, TPS65913_WEEKS_REG = 0x06,
TPS65913_RTC_CTRL_REG = 0x10, TPS65913_RTC_CTRL_REG = 0x10,
TPS65913_RTC_STATUS_REG = 0x11, TPS65913_RTC_STATUS_REG = 0x11,
TPS65913_RTC_INTERRUPS_REG = 0x12, TPS65913_RTC_INTERRUPTS_REG = 0x12,
}; };
enum { enum {

View File

@ -958,7 +958,7 @@ static void XGI_SetCRT1FIFO(struct xgi_hw_device_info *HwDeviceExtension,
data = xgifb_reg_get(pVBInfo->P3c4, 0x3D); data = xgifb_reg_get(pVBInfo->P3c4, 0x3D);
data &= 0xfe; data &= 0xfe;
xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); /* diable auto-threshold */ xgifb_reg_set(pVBInfo->P3c4, 0x3D, data); /* disable auto-threshold */
xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34); xgifb_reg_set(pVBInfo->P3c4, 0x08, 0x34);
data = xgifb_reg_get(pVBInfo->P3c4, 0x09); data = xgifb_reg_get(pVBInfo->P3c4, 0x09);