siemens/mc_apl4: Enable LVDS Display on mc_apl4
Enable PTN3460 chip initialization to get LVDS attached LCD working on mc_apl4. Change-Id: I3ccf5398f16831db321eba846d6b041daadf31dd Signed-off-by: Uwe Poeche <uwe.poeche@siemens.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/30204 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
This commit is contained in:
parent
7980d85a13
commit
18c1923e13
|
@ -2,3 +2,5 @@ romstage-y += memory.c
|
|||
romstage-y += gpio.c
|
||||
|
||||
ramstage-y += gpio.c
|
||||
ramstage-y += mainboard.c
|
||||
ramstage-y += ptn3460.c
|
||||
|
|
|
@ -0,0 +1,91 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014-2018 Siemens AG
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef PTN3460_H_
|
||||
#define PTN3460_H_
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define PTN_SLAVE_ADR 0x60
|
||||
#define PTN_I2C_CONTROLLER 7
|
||||
|
||||
#define PTN_EDID_OFF 0x00
|
||||
#define PTN_EDID_LEN 0x80
|
||||
#define PTN_CONFIG_OFF 0x80
|
||||
#define PTN_FLASH_CFG_OFF 0xE8
|
||||
#define PTN_FLASH_CFG_LEN 0x04
|
||||
#define PTN_MAX_EDID_NUM 6
|
||||
|
||||
/* Define some error codes that can be used. */
|
||||
#define PTN_NO_ERROR 0x00000000
|
||||
#define PTN_BUS_ERROR 0x10000000
|
||||
#define PTN_INVALID_EDID 0x20000000
|
||||
|
||||
struct ptn_3460_config {
|
||||
/* DiplayPort interface control. */
|
||||
uint8_t dp_interface_ctrl;
|
||||
/* LVDS interface control register 1. */
|
||||
uint8_t lvds_interface_ctrl1;
|
||||
/* LVDS interface control register 2. */
|
||||
uint8_t lvds_interface_ctrl2;
|
||||
/* LVDS interface control register 3. */
|
||||
uint8_t lvds_interface_ctrl3;
|
||||
/* Select which EDID-block is emulated. */
|
||||
uint8_t edid_rom_emulation;
|
||||
/* Select which EDID block to map to 0..0x7F. */
|
||||
uint8_t edid_rom_access_ctrl;
|
||||
/* Smallest PWM frequency for back light. */
|
||||
uint8_t pwm_min[3];
|
||||
/* Biggest PWM frequency for back light. */
|
||||
uint8_t pwm_max[3];
|
||||
/* Fast link training control register. */
|
||||
uint8_t fast_link_ctrl;
|
||||
/* Pin configuration control register 1. */
|
||||
uint8_t pin_cfg_ctrl1;
|
||||
/* Pin configuration control register 2. */
|
||||
uint8_t pin_cfg_ctrl2;
|
||||
/* Default PWM bit count in DPCD register. */
|
||||
uint8_t pwm_default;
|
||||
/* Current PWM bit count in DPCD register. */
|
||||
uint16_t pwm_value;
|
||||
/* Default PWM frequency in DPCD register. */
|
||||
uint8_t pwm_default_freq;
|
||||
/* Panel T3 timing value. */
|
||||
uint8_t t3_timing;
|
||||
/* Panel T12 timing value. */
|
||||
uint8_t t12_timing;
|
||||
/* Back light control register. */
|
||||
uint8_t backlight_ctrl;
|
||||
/* Panel T2 delay. */
|
||||
uint8_t t2_delay;
|
||||
/* Panel T4 timing value. */
|
||||
uint8_t t4_timing;
|
||||
/* Panel T5 delay. */
|
||||
uint8_t t5_delay;
|
||||
} __packed;
|
||||
|
||||
struct ptn_3460_flash {
|
||||
/* Flash command (erase or erase and flash). */
|
||||
uint8_t cmd;
|
||||
/* Magic number needed by the flash algorithm. */
|
||||
uint16_t magic;
|
||||
/* Trigger for starting flash operation. */
|
||||
uint8_t trigger;
|
||||
} __packed;
|
||||
|
||||
int ptn3460_init(const char *hwi_block);
|
||||
int ptn3460_write_edid(uint8_t edid_num, const uint8_t data[PTN_EDID_LEN]);
|
||||
int ptn_select_edid(uint8_t edid_num);
|
||||
#endif /* PTN3460_H_ */
|
|
@ -0,0 +1,35 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2018 Siemens AG
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <bootstate.h>
|
||||
#include <console/console.h>
|
||||
#include <hwilib.h>
|
||||
#include <baseboard/variants.h>
|
||||
#include <variant/ptn3460.h>
|
||||
|
||||
void variant_mainboard_final(void)
|
||||
{
|
||||
int status;
|
||||
|
||||
/*
|
||||
* Set up the DP2LVDS converter.
|
||||
* ptn3460_init() may only be executed after i2c bus init.
|
||||
*/
|
||||
status = ptn3460_init("hwinfo.hex");
|
||||
if (status)
|
||||
printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
|
||||
else
|
||||
printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
|
||||
}
|
|
@ -0,0 +1,171 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2014-2018 Siemens AG
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <hwilib.h>
|
||||
#include <device/i2c_simple.h>
|
||||
#include <variant/ptn3460.h>
|
||||
|
||||
/*
|
||||
* This function sets up the DP2LVDS-converter to be used with the appropriate
|
||||
* lcd panel.
|
||||
*
|
||||
* @param *hwi_block Filename in CBFS of the block to use as HW-Info.
|
||||
* @return 0 on success or HWI-Data/PTN error code.
|
||||
*/
|
||||
int ptn3460_init(const char *hwi_block)
|
||||
{
|
||||
struct ptn_3460_config cfg;
|
||||
int status;
|
||||
uint8_t disp_con = 0, color_depth = 0;
|
||||
uint8_t edid_data[PTN_EDID_LEN];
|
||||
int i;
|
||||
|
||||
if (!hwi_block || hwilib_find_blocks(hwi_block) != CB_SUCCESS) {
|
||||
printk(BIOS_ERR, "LCD: Info block \"%s\" not found!\n",
|
||||
hwi_block);
|
||||
return 1;
|
||||
}
|
||||
/* Get all needed information from hwinfo block. */
|
||||
if (hwilib_get_field(Edid, edid_data, sizeof(edid_data)) !=
|
||||
sizeof(edid_data)) {
|
||||
printk(BIOS_ERR, "LCD: No EDID data available in %s\n",
|
||||
hwi_block);
|
||||
return 1;
|
||||
}
|
||||
if ((hwilib_get_field(PF_DisplCon, &disp_con, sizeof(disp_con)) !=
|
||||
sizeof(disp_con))) {
|
||||
printk(BIOS_ERR, "LCD: Missing panel features from %s\n",
|
||||
hwi_block);
|
||||
return 1;
|
||||
}
|
||||
if (hwilib_get_field(PF_Color_Depth, &color_depth, sizeof(color_depth))
|
||||
!= sizeof(color_depth)) {
|
||||
printk(BIOS_ERR, "LCD: Missing panel features from %s\n",
|
||||
hwi_block);
|
||||
return 1;
|
||||
}
|
||||
/*
|
||||
* Here, all the desired information for setting up DP2LVDS converter
|
||||
* is present. Inside the converter, table 6 will be used for the
|
||||
* timings.
|
||||
*/
|
||||
status = ptn3460_write_edid(6, edid_data);
|
||||
if (status)
|
||||
return status;
|
||||
/* Select this table to be emulated. */
|
||||
ptn_select_edid(6);
|
||||
/* Read PTN configuration data. */
|
||||
status = i2c_read_bytes(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
|
||||
PTN_CONFIG_OFF, (uint8_t *)&cfg,
|
||||
sizeof(cfg));
|
||||
if (status)
|
||||
return (PTN_BUS_ERROR | status);
|
||||
/* Set up configuration data according to the hwinfo block we get. */
|
||||
cfg.dp_interface_ctrl = 0;
|
||||
/* Use odd-bus for clock distribution only. */
|
||||
cfg.lvds_interface_ctrl1 = 0x01;
|
||||
if (disp_con == PF_DISPLCON_LVDS_DUAL)
|
||||
/* Turn on dual LVDS lane and clock. */
|
||||
cfg.lvds_interface_ctrl1 |= 0x0b;
|
||||
if (color_depth == PF_COLOR_DEPTH_6BIT)
|
||||
/* Use 18 bits per pixel. */
|
||||
cfg.lvds_interface_ctrl1 |= 0x20;
|
||||
|
||||
/* No clock spreading, 300 mV LVDS swing. */
|
||||
cfg.lvds_interface_ctrl2 = 0x03;
|
||||
/* Swap LVDS signal (N vs. P). */
|
||||
cfg.lvds_interface_ctrl3 = 0x04;
|
||||
/* Delay T2 (VDD to LVDS active) by 16 ms. */
|
||||
cfg.t2_delay = 1;
|
||||
/* 250 ms from LVDS to backlight active. */
|
||||
cfg.t3_timing = 10;
|
||||
/* 1 second re-power delay. */
|
||||
cfg.t12_timing = 20;
|
||||
/* 150 ms backlight off to LVDS inactive. */
|
||||
cfg.t4_timing = 3;
|
||||
/* Delay T5 (LVDS to VDD inactive) by 16 ms. */
|
||||
cfg.t5_delay = 1;
|
||||
/* Enable backlight control. */
|
||||
cfg.backlight_ctrl = 0;
|
||||
|
||||
/* Write back configuration data to PTN3460. */
|
||||
for (i = 0; i < sizeof(struct ptn_3460_config); i++) {
|
||||
status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
|
||||
PTN_CONFIG_OFF+i,
|
||||
*(((uint8_t *)&cfg)+i));
|
||||
if (status)
|
||||
return (PTN_BUS_ERROR | status);
|
||||
}
|
||||
|
||||
return PTN_NO_ERROR;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function writes one Extended Display Identification Data (EDID)
|
||||
* structure to PTN3460.
|
||||
*
|
||||
* @param edid_num Number of EDID that must be written (0..6).
|
||||
* @param *data Pointer to a buffer where data to write is stored in.
|
||||
* @return 0 on success or error code.
|
||||
*/
|
||||
int ptn3460_write_edid(uint8_t edid_num, const uint8_t data[PTN_EDID_LEN])
|
||||
{
|
||||
int status;
|
||||
int i;
|
||||
|
||||
if (edid_num > PTN_MAX_EDID_NUM)
|
||||
return PTN_INVALID_EDID;
|
||||
|
||||
/* First enable access to the desired EDID table. */
|
||||
status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
|
||||
PTN_CONFIG_OFF + 5, edid_num);
|
||||
if (status)
|
||||
return (PTN_BUS_ERROR | status);
|
||||
|
||||
/* Now we can simply write EDID-data to ptn3460. */
|
||||
for (i = 0; i < PTN_EDID_LEN; i++) {
|
||||
status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
|
||||
PTN_EDID_OFF + i, data[i]);
|
||||
if (status)
|
||||
return (PTN_BUS_ERROR | status);
|
||||
}
|
||||
|
||||
return PTN_NO_ERROR;
|
||||
}
|
||||
|
||||
/*
|
||||
* This function selects one of 7 EDID-tables inside PTN3460 which should be
|
||||
* emulated on DisplayPort and turn emulation ON.
|
||||
*
|
||||
* @param edid_num Number of EDID to emulate (0..6).
|
||||
* @return 0 on success or error code.
|
||||
*/
|
||||
int ptn_select_edid(uint8_t edid_num)
|
||||
{
|
||||
int status;
|
||||
uint8_t val;
|
||||
|
||||
if (edid_num > PTN_MAX_EDID_NUM)
|
||||
return PTN_INVALID_EDID;
|
||||
/* Enable emulation of the desired EDID table. */
|
||||
val = (edid_num << 1) | 1;
|
||||
status = i2c_writeb(PTN_I2C_CONTROLLER, PTN_SLAVE_ADR,
|
||||
PTN_CONFIG_OFF + 4, val);
|
||||
if (status)
|
||||
return (PTN_BUS_ERROR | status);
|
||||
else
|
||||
return PTN_NO_ERROR;
|
||||
}
|
Loading…
Reference in New Issue