mb/lenovo/t420(s): Do minor cosmetic changes

Align the whitespace and do some cosmetic changes. This makes it easier
to fold these two boards into a variant setup.

Change-Id: I53bdd90ae47b52dfdfec27229c6b904487fa2081
Signed-off-by: Peter Lemenkov <lemenkov@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40380
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit is contained in:
Peter Lemenkov 2019-10-23 22:07:58 +02:00 committed by Angel Pons
parent 75f4776610
commit 18f888598d
6 changed files with 13 additions and 10 deletions

View File

@ -16,10 +16,10 @@ config BOARD_SPECIFIC_OPTIONS
select HAVE_CMOS_DEFAULT
select HAVE_ACPI_RESUME
select INTEL_INT15
select MAINBOARD_HAS_LIBGFXINIT
select GFX_GMA_PANEL_1_ON_LVDS
select MAINBOARD_HAS_LPC_TPM
select MAINBOARD_HAS_TPM1
select MAINBOARD_HAS_LIBGFXINIT
select GFX_GMA_PANEL_1_ON_LVDS
select DRIVERS_LENOVO_HYBRID_GRAPHICS
select INTEL_GMA_HAVE_VBT
select MAINBOARD_USES_IFD_GBE_REGION

View File

@ -1,4 +1,5 @@
chip northbridge/intel/sandybridge
# IGD Displays
register "gfx" = "GMA_STATIC_DISPLAYS(1)"
# Enable DisplayPort Hotplug with 6ms pulse
@ -66,6 +67,7 @@ chip northbridge/intel/sandybridge
register "c2_latency" = "101" # c2 not supported
# device specific SPI configuration
register "spi_uvscc" = "0x2005"
register "spi_lvscc" = "0x2005"

View File

@ -35,8 +35,8 @@ static void hybrid_graphics_init(void)
}
const struct southbridge_usb_port mainboard_usb_ports[] = {
{ 0, 1, -1 }, /* P0 empty */
{ 1, 1, 1 }, /* P1 system port 2 (To system port) (EHCI debug), OC 1 */
{ 0, 1, -1 }, /* P0: empty */
{ 1, 1, 1 }, /* P1: system port 2 (To system port) (EHCI debug), OC 1 */
{ 1, 1, -1 }, /* P2: HALF MINICARD (WLAN) no oc */
{ 1, 0, -1 }, /* P3: WWAN, no OC */
{ 1, 1, -1 }, /* P4: smartcard, no OC */

View File

@ -2,6 +2,7 @@
/* This file is part of the coreboot project. */
#include <southbridge/intel/common/gpio.h>
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
.gpio0 = GPIO_MODE_GPIO, // -USB30_SMIB - input
.gpio1 = GPIO_MODE_GPIO, // -EC_SCI - input
@ -69,7 +70,7 @@ static const struct pch_gpio_set1 pch_gpio_set1_direction = {
.gpio28 = GPIO_DIR_OUTPUT,
.gpio29 = GPIO_DIR_OUTPUT,
.gpio30 = GPIO_DIR_OUTPUT,
.gpio31 = GPIO_DIR_INPUT
.gpio31 = GPIO_DIR_INPUT,
};
static const struct pch_gpio_set1 pch_gpio_set1_level = {

View File

@ -6,8 +6,8 @@
#include <cpu/x86/smm.h>
#include <ec/acpi/ec.h>
#include <ec/lenovo/h8/h8.h>
#include <southbridge/intel/common/pmutil.h>
#include <southbridge/intel/bd82x6x/pch.h>
#include <southbridge/intel/common/pmutil.h>
#define GPE_EC_SCI 1
#define GPE_EC_WAKE 13