util/board_status: do a spell check

Change-Id: Ie39be471851586076343b8e9454a9140d4664b8d
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: https://review.coreboot.org/21322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
This commit is contained in:
Idwer Vollering 2017-09-01 17:24:18 +02:00
parent 3f43edc351
commit 1918c81d65
1 changed files with 6 additions and 6 deletions

View File

@ -9,13 +9,13 @@ Else you will need to have to set the default log level at compile
time, to do that go in "Console --->" in make menuconfig, then set
"Default console log level" to SPEW
Rereference:
------------
Reference:
----------
[1] in make menuconfig you should have: [*] Use CMOS for configuration values
This option is also known as CONFIG_USE_OPTION_TABLE in Kconfig.
Information trough SSH
Information through SSH
======================
board_status.sh can gather information trough ssh with the -r
board_status.sh can gather information through ssh with the -r
option.
When using "-r <host>", The script will attempt to log into
@ -28,10 +28,10 @@ That can be achieved with the use of SSH keys and ssh-agent.
board_status.sh expects the remote host to have the following
programs in its path: cbmem, dmesg
Boot log gathering trough a serial port
Boot log gathering through a serial port
=======================================
When using -s </dev/xxx>, board_status.sh starts by retrieving the
boot log trough the serial port.
boot log through the serial port.
To produce such logs, power off the board, run board_status.sh
with the right arguments, power on the board.