google/oak: elm: Update the differences between oak-rev6 and elm-rev0

- Remove the deprecated revison settings.
- Change LID pin to SPI_CK.
- Add i2c bus number and i2c slave address for elm.
- Skip the pin configurations(ALC5514 and USB OC pins) belonging to Oak.
- Add Hynix 4GB DRAM config

BRANCH=none
BUG=chrome-os-partner:51725
TEST=boot to kernel on elm-rev0

Change-Id: Ifaedd115c84d095ee289b576ff76af6b0aa3e545
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2ed4543cdc7e84a0463b73dda96027270ec30272
Original-Change-Id: Id957374d7a67b8c72df1d07a6cecc1064d4e0356
Original-Signed-off-by: Yidi Lin <yidi.lin@mediatek.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/332733
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/14692
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

src/mainboard/google/oak/Kconfig

@@ -83,6 +83,6 @@ config GBB_HWID
 config BOARD_ID_ADJUSTMENT
 	int
 	default 0 if BOARD_GOOGLE_OAK
-	default 6
+	default 7
 
 endif # BOARD_GOOGLE_OAK

src/mainboard/google/oak/gpio.h

@@ -17,8 +17,11 @@
 #define __MAINBOARD_GOOGLE_OAK_GPIO_H__
 #include <soc/pinmux.h>
 
+#define LID ((board_id() + CONFIG_BOARD_ID_ADJUSTMENT < 7) ? \
+	PAD_EINT12 : PAD_SPI_CK)
+
+
 enum {
-	LID		= PAD_EINT12,
 	/* Board ID related GPIOS. */
 	BOARD_ID_0	= PAD_RDN3_A,
 	BOARD_ID_1	= PAD_RDP3_A,

src/mainboard/google/oak/mainboard.c

@@ -87,12 +87,23 @@ static void configure_audio(void)
 	gpio_set_mode(PAD_I2S0_MCK, PAD_I2S0_MCK_FUNC_I2S1_MCK);
 	gpio_set_mode(PAD_I2S0_DATA0, PAD_I2S0_DATA0_FUNC_I2S1_DO_1);
 	gpio_set_mode(PAD_I2S0_DATA1, PAD_I2S0_DATA1_FUNC_I2S2_DI_2);
-	if (board_id() + CONFIG_BOARD_ID_ADJUSTMENT >= 5)
-		gpio_set_mode(PAD_UCTS0, PAD_UCTS0_FUNC_I2S2_DI_1);
-
 	/* codec ext MCLK ON */
 	mt6391_gpio_output(MT6391_KP_COL4, 1);
+
+	switch (board_id() + CONFIG_BOARD_ID_ADJUSTMENT) {
+	case 2:
+	case 3:
+	case 4:
 		mt6391_gpio_output(MT6391_KP_COL5, 1);
+		break;
+	case 5:
+	case 6:
+		gpio_set_mode(PAD_UCTS0, PAD_UCTS0_FUNC_I2S2_DI_1);
+		mt6391_gpio_output(MT6391_KP_COL5, 1);
+		break;
+	default:
+		break;
+	}
 
 	/* Init i2c bus Timing register for audio codecs */
 	mtk_i2c_bus_init(CODEC_I2C_BUS);
@@ -111,10 +122,13 @@ static void configure_usb(void)
 		/* Configure USB OC pins*/
 		gpio_input_pullup(PAD_MSDC3_DSL);
 		gpio_input_pullup(PAD_CMPCLK);
+		if (board_id() + CONFIG_BOARD_ID_ADJUSTMENT < 7)
 			gpio_input_pullup(PAD_PCM_SYNC);
 	}
 
-	if (board_id() + CONFIG_BOARD_ID_ADJUSTMENT > 4) {
+	if (board_id() + CONFIG_BOARD_ID_ADJUSTMENT > 4 &&
+	    board_id() + CONFIG_BOARD_ID_ADJUSTMENT < 7)
+	{
 		/* USB 2.0 type A port over current interrupt pin(low active) */
 		gpio_input_pullup(PAD_UCTS2);
 		/* USB 2.0 type A port BC1.2 STATUS(low active) */
@@ -134,9 +148,6 @@ static void configure_backlight(void)
 {
 	/* Configure PANEL_LCD_POWER_EN */
 	switch (board_id() + CONFIG_BOARD_ID_ADJUSTMENT) {
-	case 1:
-	case 2:
-		break;
 	case 3:
 		gpio_output(PAD_UCTS2, 0);
 		break;
@@ -156,26 +167,6 @@ static void configure_display(void)
 {
 	mtcmos_display_power_on();
 
-	switch (board_id() + CONFIG_BOARD_ID_ADJUSTMENT) {
-	case 0:
-		/* board from Rev0, Rev1 */
-		/* vgp2 set to 1.8V for it6151 */
-		mt6391_configure_ldo(LDO_VGP2, LDO_1P8);
-		gpio_output(PAD_PCM_RX, 0); /* IT6151_SYSRSTN */
-		gpio_output(PAD_CMMCLK, 1); /* PANEL_3V3_ENABLE */
-		gpio_output(PAD_PCM_SYNC, 1); /* IT6151_1V2_ENABLE */
-		gpio_output(PAD_PCM_RX, 1); /* IT6151_SYSRSTN */
-		break;
-	case 1:
-		/* board from Rev0, Rev1 */
-		/* vgp2 set to 1.8V for it6151 */
-		mt6391_configure_ldo(LDO_VGP2, LDO_1P8);
-		gpio_output(PAD_URTS0, 0); /* IT6151_SYSRSTN */
-		gpio_output(PAD_URTS2, 1); /* IT6151_1V2_ENABLE */
-		gpio_output(PAD_CMMCLK, 1); /* PANEL_3V3_ENABLE */
-		gpio_output(PAD_URTS0, 1); /* IT6151_SYSRSTN */
-		break;
-	default:
 	/* board from Rev2 */
 	gpio_output(PAD_CMMCLK, 1); /* PANEL_3V3_ENABLE */
 	/* vgp2 set to 3.3V for ps8640 */
@@ -198,27 +189,25 @@ static void configure_display(void)
 	/* for level shift(1.8V to 3.3V) on */
 	udelay(100);
 }
-}
 
 static void display_startup(void)
 {
 	struct edid edid;
-	u8 i2c_bus;
+	u8 i2c_bus, i2c_addr;
 	int ret;
 
-	switch (board_id() + CONFIG_BOARD_ID_ADJUSTMENT) {
+	if (board_id() + CONFIG_BOARD_ID_ADJUSTMENT > 6) {
-	case 0:
+		i2c_bus = 0;
-	case 1:
+		i2c_addr = 0x8;
-		i2c_bus = 3;
+	} else {
-		break;
-	default:
 		i2c_bus = 4;
-		break;
+		i2c_addr = 0x18;
 	}
+
 	mtk_i2c_bus_init(i2c_bus);
 
-	ps8640_init(i2c_bus, 0x18);
+	ps8640_init(i2c_bus, i2c_addr);
-	if (ps8640_get_edid(i2c_bus, 0x18, &edid)) {
+	if (ps8640_get_edid(i2c_bus, i2c_addr, &edid)) {
 		printk(BIOS_ERR, "Can't get panel's edid\n");
 		return;
 	}

src/mainboard/google/oak/sdram_configs.c

@@ -22,7 +22,7 @@ static const struct mt8173_sdram_params sdram_configs[] = {
 #include "sdram_inf/sdram-lpddr3-hynix-2GB.inc"   /* ram_code = 0000 */
 #include "sdram_inf/sdram-lpddr3-samsung-2GB.inc" /* ram_code = 0001 */
 #include "sdram_inf/sdram-lpddr3-samsung-4GB.inc" /* ram_code = 0010 */
-#include "sdram_inf/sdram-unused.inc"             /* ram_code = 0011 */
+#include "sdram_inf/sdram-lpddr3-hynix-4GB.inc"   /* ram_code = 0011 */
 #include "sdram_inf/sdram-unused.inc"             /* ram_code = 0100 */
 #include "sdram_inf/sdram-unused.inc"             /* ram_code = 0101 */
 #include "sdram_inf/sdram-unused.inc"             /* ram_code = 0110 */

src/mainboard/google/oak/sdram_inf/sdram-lpddr3-hynix-4GB.inc

@@ -0,0 +1,116 @@
+{ /* 2GB (8Gb + 8Gb) for single rank dram setting */
+	{
+		.impedance_drvp = 0x9,
+		.impedance_drvn = 0xa,
+		.datlat_ucfirst = 19,
+
+		.ca_train = {
+			[CHANNEL_A] = { 7, 7, 5, 6, 2, 1, 0, 1, 0, 2},
+			[CHANNEL_B] = { 1, 2, 2, 0, 2, 3, 3, 3, 3, 3}
+		},
+
+		.ca_train_center = {
+			[CHANNEL_A] = 2,
+			[CHANNEL_B] = 0
+		},
+
+		.wr_level = {
+			[CHANNEL_A] = { 5, 6, 5, 6},
+			[CHANNEL_B] = { 6, 6, 6, 4}
+		},
+
+		.gating_win = {
+			[CHANNEL_A] = {
+					{ 28, 56},
+					{ 28, 56}
+			},
+			[CHANNEL_B] = {
+					{ 28, 56},
+					{ 28, 56}
+			}
+		},
+
+		.rx_dqs_dly = {
+			[CHANNEL_A] = 0x110e0b0b,
+			[CHANNEL_B] = 0x12100d0d
+		},
+
+		.rx_dq_dly = {
+			[CHANNEL_A] = {
+						0x01040302,
+						0x04010300,
+						0x02040300,
+						0x04030302,
+						0x04070400,
+						0x07070707,
+						0x05070808,
+						0x00010404
+			},
+			[CHANNEL_B] = {
+						0x05060604,
+						0x04010400,
+						0x05070300,
+						0x05030504,
+						0x07090500,
+						0x08090707,
+						0x080a0a0a,
+						0x02000604
+			}
+		},
+	},
+	{
+		.actim     = 0xaafd478c,
+		.actim1    = 0x91001f59,
+		.actim05t  = 0x000025e1,
+		.conf1     = 0x00048403,
+		.conf2     = 0x030000a9,
+		.ddr2ctl   = 0x000063b1,
+		.gddr3ctl1 = 0x11000000,
+		.misctl0   = 0x21000000,
+		.pd_ctrl   = 0xd1976442,
+		.rkcfg     = 0x002156c1,
+		.test2_3   = 0xbfc70401,
+		.test2_4   = 0x2801110d
+	},
+	{
+		.cona     = 0x50a350a7,
+		.conb     = 0x17283544,
+		.conc     = 0x0a1a0b1a,
+		.cond     = 0x00000000,
+		.cone     = 0xffff0848,
+		.conf     = 0x08420000,
+		.cong     = 0x2b2b2a38,
+		.conh     = 0x00000000,
+		.conm_1   = 0x40000500,
+		.conm_2   = 0x400005ff,
+		.mdct_1   = 0x80030303,
+		.mdct_2   = 0x34220c3f,
+		.test0    = 0xcccccccc,
+		.test1    = 0xcccccccc,
+		.testb    = 0x00060124,
+		.testc    = 0x38470000,
+		.testd    = 0x00000000,
+		.arba     = 0x7f077a49,
+		.arbc     = 0xa0a070dd,
+		.arbd     = 0x07007046,
+		.arbe     = 0x40407046,
+		.arbf     = 0xa0a070c6,
+		.arbg     = 0xffff7047,
+		.arbi     = 0x20406188,
+		.arbj     = 0x9719595e,
+		.arbk     = 0x64f3fc79,
+		.slct_1   = 0x00010800,
+		.slct_2   = 0xff03ff00,
+		.bmen     = 0x00ff0001
+	},
+	{
+		.mrs_1  = 0x00830001,
+		.mrs_2  = 0x001c0002,
+		.mrs_3  = 0x00010003,
+		.mrs_10 = 0x00ff000a,
+		.mrs_11 = 0x0000000b,
+		.mrs_63 = 0x0000003f
+	},
+	.type = TYPE_LPDDR3,
+	.dram_freq = 896 * MHz,
+},