IEI NOVA-4899R: Fix incorrect irq_tables.c.

Signed-off-by: Luis Correia <luis.f.correia@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2666 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Luis Correia 2007-05-15 06:55:03 +00:00 committed by Uwe Hermann
parent 8bcf08b119
commit 197daeda5a
1 changed files with 201 additions and 29 deletions

View File

@ -1,39 +1,211 @@
/* This file was generated by getpir.c, do not modify! /*
(but if you do, please run checkpir on it to verify) * This file is part of the LinuxBIOS project.
* Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
* *
* Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM * Copyright (C) 2007 Luis Correia <luis.f.correia@gmail.com>
*/ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/pirq_routing.h> #include <arch/pirq_routing.h>
/*
* IRQ 5530 USB Network Network Network free
* controller northbridge device device#0 device#1 device#2 slot
* 00.13.0 00.0a.00 00.0b.00 00.0c.00 00.0f.00
* ------------------------------------------------------------------------
* 14 INTA# INTA# n.c. n.c. n.c. INTA#
* 5 INTB# n.c. n.c. n.c. INTA# n.c.
* 10 INTC# n.c. n.c. INTA# n.c. n.c.
* 11 INTD# n.c. INTA# n.c. n.c. n.c.
*/
/*
* - the USB controller should be connected to IRQ14
* - the network controller #0 should be connected to IRQ11
* - the network controller #1 should be connected to IRQ10
* - the network controller #2 should be connected to IRQ5
* - the additional PCI slot must share the IRQ with the internal USB
*/
#define IRQ_BITMAP_LINK0 0x0200 /* bit 9 means IRQ 9 available for this cs5530 INT input*/
#define IRQ_BITMAP_LINK1 0x0020 /* bit 5 means IRQ 5 available for this cs5530 INT input*/
#define IRQ_BITMAP_LINK2 0x0400 /* bit 10 means IRQ10 available for this cs5530 INT input*/
#define IRQ_BITMAP_LINK3 0x0800 /* bit 11 means IRQ11 available for this cs5530 INT input*/
const struct irq_routing_table intel_irq_routing_table = { const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */ .signature = PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */ .version = PIRQ_VERSION, /* u16 version */
32+16*5, /* there can be total 5 devices on the bus */ .size = 32+16*IRQ_SLOT_COUNT, /* there can be total 4 devices on the bus */
0x00, /* Where the interrupt router lies (bus) */ .rtr_bus = 0x00, /* Where the interrupt router lies (bus) */
(0x12<<3)|0x0, /* Where the interrupt router lies (dev) */ .rtr_devfn = (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
0xe00, /* IRQs devoted exclusively to PCI usage */ .exclusive_irqs = 0x4C20, /* IRQs devoted exclusively to PCI usage */
0x1078, /* Vendor */ .rtr_vendor = 0x1078, /* Vendor */
0x0002, /* Device */ .rtr_device = 0x0100, /* Device */
0, /* Crap (miniport) */ .miniport_data = 0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */ .checksum = 0xBF+16, /* TODO! calculate correct sum ! */
0x2d, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */ /*
{ * Definition for "slot#0". There is no real slot,
/* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */ * the network device is soldered...
// USB */
{0x00,(0x13<<3)|0x0, {{0x01, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, .slots = {
// eth0 [0] = {
{0x00,(0x0a<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},//0x3, 0x0}, .bus = 0x00,
// eth1 .devfn = (0x0a<<3)|0x0,
{0x00,(0x0b<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x02, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},//0x2, 0x0}, .irq = {
// eth2 [0] = {
{0x00,(0x0c<<3)|0x0, {{0x04, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0},//0x1, 0x0}, .link = 0x03, /* INT C */
// PCI slot .bitmap = IRQ_BITMAP_LINK2
{0x00,(0x0f<<3)|0x0, {{0x04, 0xdeb8}, {0x03, 0xdeb8}, {0x02, 0xdeb8}, {0x00, 0x0deb8}}, 0x0, 0x0}, },
[1] = {
.link = 0x02, /* INT B */
.bitmap = IRQ_BITMAP_LINK1
},
[2] = { /* = device INTA output */
.link = 0x01, /* INT A */
.bitmap = IRQ_BITMAP_LINK0
},
[3] = {
.link = 0x04, /* = cs5530 INT D input */
.bitmap = IRQ_BITMAP_LINK3
}
},
.slot = 0x3, /* soldered */
},
/*
* Definition for "slot#1". There is no real slot,
* the network device is soldered...
*
* Configuration is ommited on purpose in the attempt of solving the
* issue with IRQ panics (this is device is actually eth1)
[1] = {
.bus = 0x00,
.devfn = (0x0b<<3)|0x0,
.irq = {
[0] = {
.link = 0x04,
.bitmap = IRQ_BITMAP_LINK3
},
[1] = {
.link = 0x03,
.bitmap = IRQ_BITMAP_LINK2
},
[2] = {
.link = 0x02,
.bitmap = IRQ_BITMAP_LINK1
},
[3] = {
.link = 0x01,
.bitmap = IRQ_BITMAP_LINK0
}
},
.slot = 0x2,
},
*/
/*
* Definition for "slot#2". There is no real slot,
* the network device is soldered...
*/
[2] = {
.bus = 0x00,
.devfn = (0x0c<<3)|0x0,
.irq = {
[0] = {
.link = 0x01, /* INT A */
.bitmap = IRQ_BITMAP_LINK0
},
[1] = {
.link = 0x04, /* INT D */
.bitmap = IRQ_BITMAP_LINK3
},
[2] = { /* = device INTA output */
.link = 0x03, /* INT C */
.bitmap = IRQ_BITMAP_LINK2
},
[3] = {
.link = 0x02, /* = cs5530 INT B input */
.bitmap = IRQ_BITMAP_LINK1
}
},
.slot = 0x1, /* soldered */
},
/*
* This is a free PCI slot
*/
[3] = {
.bus = 0x00,
.devfn = (0x0f<<3)|0x0,
.irq = {
[0] = { /* = device INTA output */
.link = 0x04, /* INT D */
.bitmap = IRQ_BITMAP_LINK3
},
[1] = {
.link = 0x03, /* = cs5530 INT C input */
.bitmap = IRQ_BITMAP_LINK2
},
[2] = {
.link = 0x02, /* INT B */
.bitmap = IRQ_BITMAP_LINK1
},
[3] = {
.link = 0x01, /* INT A */
.bitmap = IRQ_BITMAP_LINK0
}
},
.slot = 0x6, /* FIXME: should be not 0, as it defines a real slot */
},
/*
* Definition for "slot#3". There is no real slot,
* the USB device is embedded...
*/
[4] = {
.bus = 0x00,
.devfn = (0x13<<3)|0x0,
.irq = {
[0] = {
.link = 0x02, /* INT B */
.bitmap = IRQ_BITMAP_LINK1
},
[1] = {
.link = 0x01, /* INT A */
.bitmap = IRQ_BITMAP_LINK0
},
[2] = {
.link = 0x04, /* INT D */
.bitmap = IRQ_BITMAP_LINK3
},
[3] = {
.link = 0x03, /* INT C */
.bitmap = IRQ_BITMAP_LINK2
}
},
.slot = 0x5, /* chip internal */
}
} }
}; };
/**
* Copy the IRQ routing table to memory.
*
* @param addr Destination address (between 0xF0000...0x100000).
* @return The end address of the pirq routing table in memory.
**/
unsigned long write_pirq_routing_table(unsigned long addr) unsigned long write_pirq_routing_table(unsigned long addr)
{ {
return copy_pirq_routing_table(addr); return copy_pirq_routing_table(addr);
} }