GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Initial Intel 440BX RAM initialization framework. 

This does _not_ fully work, yet. You will _not_ be able to boot any
payload with this code, yet.

Add missing license headers.

Base the northbridge.c file on the Intel 855PM version, that comes
closer to what we want.

The raminit.c file is written from scratch and hardcodes several
values for now. This needs to be fixed later by reading the
correct values via SPD.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2576 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2007-04-01 17:24:03 +00:00
parent 0d9d0bae8a
commit 1a9c892d58
6 changed files with 625 additions and 402 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
src/northbridge/intel/i440bx/Config.lb
View File

@ -1,2 +1,22 @@
##
## This file is part of the LinuxBIOS project.
##
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
config chip.h
object northbridge.o

20
src/northbridge/intel/i440bx/chip.h
View File

@ -1,3 +1,23 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
struct northbridge_intel_i440bx_config
{
};

60
src/northbridge/intel/i440bx/northbridge.c
View File

@ -9,15 +9,13 @@
#include <bitops.h>
#include "chip.h"
#include "northbridge.h"
#include "i440bx.h"
/*
*/
static void northbridge_init(device_t dev)
{
printk_spew("Northbridge Init\n");
}
static struct device_operations northbridge_operations = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
@ -34,20 +32,20 @@ static struct pci_driver northbridge_driver __pci_driver = {
};
#define BRIDGE_IO_MASK (IORESOURCE_IO | IORESOURCE_MEM)
static void pci_domain_read_resources(device_t dev)
{
struct resource *resource;
unsigned reg;
/* Initialize the system wide io space constraints */
resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0,0));
resource = new_resource(dev, IOINDEX_SUBTRACTIVE(0, 0));
resource->limit = 0xffffUL;
resource->flags = IORESOURCE_IO | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
/* Initialize the system wide memory resources constraints */
resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1,0));
resource = new_resource(dev, IOINDEX_SUBTRACTIVE(1, 0));
resource->limit = 0xffffffffULL;
resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
}
@ -93,36 +91,28 @@ static uint32_t find_pci_tolm(struct bus *bus)
static void pci_domain_set_resources(device_t dev)
{
static const uint8_t ramregs[] = {
0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
};
device_t mc_dev;
uint32_t pci_tolm;
pci_tolm = find_pci_tolm(&dev->link[0]);
mc_dev = dev->link[0].children;
if (mc_dev) {
/* Figure out which areas are/should be occupied by RAM.
* This is all computed in kilobytes and converted to/from
* the memory controller right at the edges.
* Having different variables in different units is
* too confusing to get right. Kilobytes are good up to
* 4 Terabytes of RAM...
*/
uint16_t tolm_r;
unsigned long tomk, tolmk;
unsigned char rambits;
int i, idx;
int idx;
for(rambits = 0, i = 0; i < sizeof(ramregs)/sizeof(ramregs[0]); i++) {
unsigned char reg;
reg = pci_read_config8(mc_dev, ramregs[i]);
/* these are ENDING addresses, not sizes.
* if there is memory in this slot, then reg will be > rambits.
* So we just take the max, that gives us total.
* We take the highest one to cover for once and future linuxbios
* bugs. We warn about bugs.
*/
if (reg > rambits)
rambits = reg;
if (reg < rambits)
printk_err("ERROR! register 0x%x is not set!\n",
ramregs[i]);
}
printk_debug("I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024);
tomk = rambits*8*1024;
/* Get the value of the highest DRB. This tells the end of
* the physical memory. The units are ticks of 8MB
* i.e. 1 means 8MB.
*/
tomk = ((unsigned long)pci_read_config8(mc_dev, DRB7)) << 15;
/* Compute the top of Low memory */
tolmk = pci_tolm >> 10;
if (tolmk >= tomk) {
@ -130,9 +120,17 @@ static void pci_domain_set_resources(device_t dev)
*/
tolmk = tomk;
}
/* Write the ram configuration registers,
* preserving the reserved bits.
*/
tolm_r = pci_read_config16(mc_dev, 0xc4);
tolm_r = ((tolmk >> 10) << 3) | (tolm_r & 0xf);
pci_write_config16(mc_dev, 0xc4, tolm_r);
/* Report the memory regions */
idx = 10;
ram_resource(dev, idx++, 0, tolmk);
ram_resource(dev, idx++, 0, 640);
ram_resource(dev, idx++, 768, tolmk - 768);
}
assign_resources(&dev->link[0]);
}
@ -170,6 +168,8 @@ static struct device_operations cpu_bus_ops = {
static void enable_dev(struct device *dev)
{
struct device_path path;
/* Set the operations if it is a special bus type */
if (dev->path.type == DEVICE_PATH_PCI_DOMAIN) {
dev->ops = &pci_domain_ops;
@ -182,5 +182,5 @@ static void enable_dev(struct device *dev)
struct chip_operations northbridge_intel_i440bx_ops = {
CHIP_NAME("Intel 440BX Northbridge")
.enable_dev = enable_dev,
.enable_dev = enable_dev,
};

22
src/northbridge/intel/i440bx/northbridge.h
View File

@ -1,6 +1,26 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef NORTHBRIDGE_INTEL_440BX_H
#define NORTHBRIDGE_INTEL_440BX_H
extern unsigned int i440bx_scan_root_bus(device_t root, unsigned int max);
#endif /* NORTHBRIDGE_INTEL_440BX_H */
#endif /* NORTHBRIDGE_INTEL_440BX_H */

875
src/northbridge/intel/i440bx/raminit.c
View File

@ -1,399 +1,540 @@
#include <cpu/x86/mtrr.h>
#include "raminit.h"
/*
This software and ancillary information (herein called SOFTWARE )
called LinuxBIOS is made available under the terms described
here. The SOFTWARE has been approved for release with associated
LA-CC Number 00-34 . Unless otherwise indicated, this SOFTWARE has
been authored by an employee or employees of the University of
California, operator of the Los Alamos National Laboratory under
Contract No. W-7405-ENG-36 with the U.S. Department of Energy. The
U.S. Government has rights to use, reproduce, and distribute this
SOFTWARE. The public may copy, distribute, prepare derivative works
and publicly display this SOFTWARE without charge, provided that this
Notice and any statement of authorship are reproduced on all copies.
Neither the Government nor the University makes any warranty, express
or implied, or assumes any liability or responsibility for the use of
this SOFTWARE. If SOFTWARE is modified to produce derivative works,
such modified SOFTWARE should be clearly marked, so as not to confuse
it with the version available from LANL.
*/
/* Copyright 2000, Ron Minnich, Advanced Computing Lab, LANL
* rminnich@lanl.gov
*/
/*
* 11/26/02 - kevinh@ispiri.com - The existing comments implied that
* this didn't work yet. Therefore, I've updated it so that it works
* correctly - at least on my VIA epia motherboard. 64MB DIMM in slot 0.
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Added automatic detection of first equipped bank and its MA mapping type.
* (Rest of configuration is done in C)
* 5/19/03 by SONE Takeshi <ts1@tsn.or.jp>
*/
/* converted to C 9/2003 Ron Minnich */
#include <spd.h>
#include <sdram_mode.h>
#include <delay.h>
#include "i440bx.h"
/* Modified for the i440bx Richard Smith 01/2005 */
/*-----------------------------------------------------------------------------
Macros and definitions.
-----------------------------------------------------------------------------*/
/* Set to 1 if your DIMMs are PC133 Note that I'm assuming CPU's FSB
* frequency is 133MHz. If your CPU runs at another bus speed, you
* might need to change some of register values.
*/
#ifndef DIMM_PC133
#define DIMM_PC133 0
#endif
/* Uncomment this to enable debugging output. */
#define DEBUG_RAM_SETUP 1
// Set to 1 if your DIMMs are CL=2
#ifndef DIMM_CL2
#define DIMM_CL2 0
#endif
void dimms_read(unsigned long x)
{
uint8_t c;
unsigned long eax;
volatile unsigned long y;
eax = x;
for(c = 0; c < 6; c++) {
y = * (volatile unsigned long *) eax;
eax += 0x10000000;
}
}
void dimms_write(int x)
{
uint8_t c;
unsigned long eax = x;
for(c = 0; c < 6; c++) {
*(volatile unsigned long *) eax = 0;
eax += 0x10000000;
}
}
#ifdef DEBUG_SETNORTHB
void setnorthb(device_t north, uint8_t reg, uint8_t val)
{
print_debug("setnorth: reg ");
print_debug_hex8(reg);
print_debug(" to ");
print_debug_hex8(val);
print_debug("\r\n");
pci_write_config8(north, reg, val);
}
/* Debugging macros. */
#if defined(DEBUG_RAM_SETUP)
#define PRINT_DEBUG(x) print_debug(x)
#define PRINT_DEBUG_HEX8(x) print_debug_hex8(x)
#define PRINT_DEBUG_HEX16(x) print_debug_hex16(x)
#define PRINT_DEBUG_HEX32(x) print_debug_hex32(x)
#define DUMPNORTH() dump_pci_device(PCI_DEV(0, 0, 0))
#else
#define setnorthb pci_write_config8
#define PRINT_DEBUG_(x)
#define PRINT_DEBUG_HEX8(x)
#define PRINT_DEBUG_HEX16(x)
#define PRINT_DEBUG_HEX32(x)
#define DUMPNORTH()
#endif
void
dumpnorth(device_t north)
{
unsigned int r, c;
for(r = 0; ; r += 16) {
print_debug_hex8(r);
print_debug(":");
for(c = 0; c < 16; c++) {
print_debug_hex8(pci_read_config8(north, r+c));
print_debug(" ");
}
print_debug("\r\n");
if (r >= 240)
break;
}
}
/* SDRAMC[7:5] - SDRAM Mode Select (SMS). */
#define RAM_COMMAND_NORMAL 0x0
#define RAM_COMMAND_NOP 0x1
#define RAM_COMMAND_PRECHARGE 0x2
#define RAM_COMMAND_MRS 0x3
#define RAM_COMMAND_CBR 0x4
static void sdram_set_registers(const struct mem_controller *ctrl)
{
device_t north = (device_t) 0;
uint8_t c, r;
/* Map the JEDEC SPD refresh rates (array index) to 440BX refresh rates as
* defined in DRAMC[2:0].
*
* [0] == Normal 15.625 us -> 15.6 us
* [1] == Reduced(.25X) 3.9 us -> 7.8 ns
* [2] == Reduced(.5X) 7.8 us -> 7.8 us
* [3] == Extended(2x) 31.3 us -> 31.2 us
* [4] == Extended(4x) 62.5 us -> 62.4 us
* [5] == Extended(8x) 125 us -> 124.8 us
*/
static const uint32_t refresh_rate_map[] = {
1, 5, 5, 2, 3, 4
};
print_err("vt8601 init starting\r\n");
north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
north = 0;
print_debug_hex32(north);
print_debug(" is the north\n");
print_debug_hex16(pci_read_config16(north, 0));
print_debug(" ");
print_debug_hex16(pci_read_config16(north, 2));
print_debug("\r\n");
/* All we are doing now is setting initial known-good values that will
* be revised later as we read SPD
*/
// memory clk enable. We are not using ECC
pci_write_config8(north,0x78, 0x01);
print_debug_hex8(pci_read_config8(north, 0x78));
// dram control, see the book.
#if DIMM_PC133
pci_write_config8(north,0x68, 0x52);
#else
pci_write_config8(north,0x68, 0x42);
#endif
// dram control, see the book.
pci_write_config8(north,0x6B, 0x0c);
// Initial setting, 256MB in each bank, will be rewritten later.
pci_write_config8(north,0x5A, 0x20);
print_debug_hex8(pci_read_config8(north, 0x5a));
pci_write_config8(north,0x5B, 0x40);
pci_write_config8(north,0x5C, 0x60);
pci_write_config8(north,0x5D, 0x80);
pci_write_config8(north,0x5E, 0xA0);
pci_write_config8(north,0x5F, 0xC0);
// It seems we have to take care of these 2 registers as if
// they are bank 6 and 7.
pci_write_config8(north,0x56, 0xC0);
pci_write_config8(north,0x57, 0xC0);
// SDRAM in all banks
pci_write_config8(north,0x60, 0x3F);
// DRAM timing. I'm suspicious of this
// This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5.
// ras precharge 4T, RAS pulse 5T
// cas2 is 0xd6, cas3 is 0xe6
// we're also backing off write pulse width to 2T, so result is 0xee
#if DIMM_CL2
pci_write_config8(north,0x64, 0xd4);
pci_write_config8(north,0x65, 0xd4);
pci_write_config8(north,0x66, 0xd4);
#else // CL=3
pci_write_config8(north,0x64, 0xe4);
pci_write_config8(north,0x65, 0xe4);
pci_write_config8(north,0x66, 0xe4);
#endif
// dram frequency select.
// enable 4K pages for 64M dram.
#if DIMM_PC133
pci_write_config8(north,0x69, 0x3c);
#else
pci_write_config8(north,0x69, 0xac);
#endif
/* IMPORTANT -- disable refresh counter */
// refresh counter, disabled.
pci_write_config8(north,0x6A, 0x00);
// clkenable configuration. kevinh FIXME - add precharge
pci_write_config8(north,0x6C, 0x00);
// dram read latch delay of 1 ns, MD drive 8 mA,
// high drive strength on MA[2: 13], we#, cas#, ras#
// As per Cindy Lee, set to 0x37, not 0x57
pci_write_config8(north,0x6D, 0x7f);
}
/* slot is the dram slot. Return size of side0 in lower 16-bit,
* side1 in upper 16-bit, in units of 8MB */
static unsigned long
spd_module_size(unsigned char slot)
{
/* for all the DRAMS, see if they are there and get the size of each
* module. This is just a very early first cut at sizing.
/* Table format: register, bitmask, value. */
static const long register_values[] = {
/* NBXCFG - NBX Configuration Register
* 0x50
*
* [31:24] SDRAM Row Without ECC
* 0 = ECC components are populated in this row
* 1 = ECC components are not populated in this row
* [23:19] Reserved
* [18:18] Host Bus Fast Data Ready Enable (HBFDRE)
* Assertion of DRAM data on host bus occurs...
* 0 = ...one clock after sampling snoop results (default)
* 1 = ...on the same clock the snoop result is being sampled
* (this mode is faster by one clock cycle)
* [17:17] ECC - EDO static Drive mode
* 0 = Normal mode (default)
* 1 = ECC signals are always driven
* [16:16] IDSEL_REDIRECT
* 0 = IDSEL1 is allocated to this bridge (default)
* 1 = IDSEL7 is allocated to this bridge
* [15:15] WSC# Handshake Disable
* 1 = Uni-processor mode
* 0 = Dual-processor mode with external IOAPIC (default)
* [14:14] Intel Reserved
* [13:12] Host/DRAM Frequency
* 00 = 100 MHz
* 01 = Reserved
* 10 = 66 MHz
* 11 = Reserved
* [11:11] AGP to PCI Access Enable
* 1 = Enable
* 0 = Disable
* [10:10] PCI Agent to Aperture Access Disable
* 1 = Disable
* 0 = Enable (default)
* [09:09] Aperture Access Global Enable
* 1 = Enable
* 0 = Disable
* [08:07] DRAM Data Integrity Mode (DDIM)
* 00 = Non-ECC
* 01 = EC-only
* 10 = ECC Mode
* 11 = ECC Mode with hardware scrubbing enabled
* [06:06] ECC Diagnostic Mode Enable (EDME)
* 1 = Enable
* 0 = Normal operation mode (default)
* [05:05] MDA Present (MDAP)
* Works in conjunction with the VGA_EN bit.
* VGA_EN MDAP
* 0 x All VGA cycles are sent to PCI
* 1 0 All VGA cycles are sent to AGP
* 1 1 All VGA cycles are sent to AGP, except for
* cycles in the MDA range.
* [04:04] Reserved
* [03:03] USWC Write Post During I/O Bridge Access Enable (UWPIO)
* 1 = Enable
* 0 = Disable
* [02:02] In-Order Queue Depth (IOQD)
* 1 = In-order queue = maximum
* 0 = A7# is sampled asserted (i.e., 0)
* [01:00] Reserved
*/
/* we may run out of registers ... */
unsigned int banks, rows, cols, reg;
unsigned int value = 0;
/* unsigned int module = ((0x50 + slot) << 1) + 1; */
unsigned int module = 0x50 + slot;
/* is the module there? if byte 2 is not 4, then we'll assume it
* is useless.
// TODO
NBXCFG, 0x00000000, 0xff00a00c,
/* DRAMC - DRAM Control Register
* 0x57
*
* [7:6] Reserved
* [5:5] Module Mode Configuration (MMCONFIG)
* TODO
* [4:3] DRAM Type (DT)
* 00 = EDO
* 01 = SDRAM
* 10 = Registered SDRAM
* 11 = Reserved
* Note: EDO, SDRAM and Registered SDRAM cannot be mixed.
* [2:0] DRAM Refresh Rate (DRR)
* 000 = Refresh disabled
* 001 = 15.6 us
* 010 = 31.2 us
* 011 = 62.4 us
* 100 = 124.8 us
* 101 = 249.6 us
* 110 = Reserved
* 111 = Reserved
*/
print_info("Slot ");
print_info_hex8(slot);
if (smbus_read_byte(module, 2) != 4) {
print_info(" is empty\r\n");
return 0;
}
print_info(" is SDRAM ");
banks = smbus_read_byte(module, 17);
/* we're going to assume symmetric banks. Sorry. */
cols = smbus_read_byte(module, 4) & 0xf;
rows = smbus_read_byte(module, 3) & 0xf;
/* grand total. You have rows+cols addressing, * times of banks, times
* width of data in bytes */
/* Width is assumed to be 64 bits == 8 bytes */
value = (1 << (cols + rows)) * banks * 8;
print_info_hex32(value);
print_info(" bytes ");
/* Return in 8MB units */
value >>= 23;
/* Choose SDRAM (not registered), and disable refresh for now. */
DRAMC, 0x00, 0x8,
/* We should have single or double side */
if (smbus_read_byte(module, 5) == 2) {
print_info("x2");
value = (value << 16) | value;
}
print_info("\r\n");
return value;
/*
* PAM[6:0] - Programmable Attribute Map Registers
*
* 0x59 [3:0] Reserved
* 0x59 [5:4] 0xF0000 - 0xFFFFF BIOS area
* 0x5a [1:0] 0xC0000 - 0xC3FFF ISA add-on BIOS
* 0x5a [5:4] 0xC4000 - 0xC7FFF ISA add-on BIOS
* 0x5b [1:0] 0xC8000 - 0xCBFFF ISA add-on BIOS
* 0x5b [5:4] 0xCC000 - 0xCFFFF ISA add-on BIOS
* 0x5c [1:0] 0xD0000 - 0xD3FFF ISA add-on BIOS
* 0x5c [5:4] 0xD4000 - 0xD7FFF ISA add-on BIOS
* 0x5d [1:0] 0xD8000 - 0xDBFFF ISA add-on BIOS
* 0x5d [5:4] 0xDC000 - 0xDFFFF ISA add-on BIOS
* 0x5e [1:0] 0xE0000 - 0xE3FFF BIOS entension
* 0x5e [5:4] 0xE4000 - 0xE7FFF BIOS entension
* 0x5f [1:0] 0xE8000 - 0xEBFFF BIOS entension
* 0x5f [5:4] 0xEC000 - 0xEFFFF BIOS entension
*
* Bit assignment:
* 00 = DRAM Disabled (all access goes to memory mapped I/O space)
* 01 = Read Only (Reads to DRAM, writes to memory mapped I/O space)
* 10 = Write Only (Writes to DRAM, reads to memory mapped I/O space)
* 11 = Read/Write (all access goes to DRAM)
*/
// TODO
PAM0, 0x00000000, 0x00,
PAM1, 0x00000000, 0x00,
PAM2, 0x00000000, 0x00,
PAM3, 0x00000000, 0x00,
PAM4, 0x00000000, 0x00,
PAM5, 0x00000000, 0x00,
PAM6, 0x00000000, 0x00,
/* DRB[0:7] - DRAM Row Boundary Registers
* 0x60 - 0x67
*
* An array of 8 byte registers, which hold the ending memory address
* assigned to each pair of DIMMs, in 8MB granularity.
*
* 0x60 DRB0 = Total memory in row0 (in 8 MB)
* 0x61 DRB1 = Total memory in row0+1 (in 8 MB)
* 0x62 DRB2 = Total memory in row0+1+2 (in 8 MB)
* 0x63 DRB3 = Total memory in row0+1+2+3 (in 8 MB)
* 0x64 DRB4 = Total memory in row0+1+2+3+4 (in 8 MB)
* 0x65 DRB5 = Total memory in row0+1+2+3+4+5 (in 8 MB)
* 0x66 DRB6 = Total memory in row0+1+2+3+4+5+6 (in 8 MB)
* 0x67 DRB7 = Total memory in row0+1+2+3+4+5+6+7 (in 8 MB)
*/
// TODO
DRB0, 0x00, 0x00,
DRB1, 0x00, 0x00,
DRB2, 0x00, 0x00,
DRB3, 0x00, 0x00,
DRB4, 0x00, 0x00,
DRB5, 0x00, 0x00,
DRB6, 0x00, 0x00,
DRB7, 0x00, 0x00,
/* FDHC - Fixed DRAM Hole Control Register
* 0x68
*
* Controls two fixed DRAM holes: 512 KB - 640 KB and 15 MB - 16 MB.
*
* [7:6] Hole Enable (HEN)
* 00 = None
* 01 = 512 KB - 640 KB (128 KB)
* 10 = 15 MB - 16 MB (1 MB)
* 11 = Reserved
* [5:0] Reserved
*/
/* No memory holes. */
FDHC, 0x00, 0x00,
/* RPS - SDRAM Row Page Size Register
* 0x74 - 0x75
*
* Sets the row page size for SDRAM. For EDO memory, the page
* size is fixed at 2 KB.
*
* [15:0] Page Size (PS)
* TODO
*/
// TODO
RPS, 0x0000, 0x0000,
/* SDRAMC - SDRAM Control Register
* 0x76-0x77
*
* [15:10] Reserved
* [09:08] Idle/Pipeline DRAM Leadoff Timing (IPDLT)
* 00 = Illegal
* 01 = Add a clock delay to the lead-off clock count
* 10 = Illegal
* 11 = Illegal
* [07:05] SDRAM Mode Select (SMS)
* 000 = Normal SDRAM Operation (default)
* 001 = NOP Command Enable
* 010 = All Banks Precharge Enable
* 011 = Mode Register Set Enable
* 100 = CBR Enable
* 101 = Reserved
* 110 = Reserved
* 111 = Reserved
* [04:04] SDRAMPWR
* 0 = 3 DIMM configuration
* 1 = 4 DIMM configuration
* [03:03] Leadoff Command Timing (LCT)
* 0 = 4 CS# Clock
* 1 = 3 CS# Clock
* [02:02] CAS# Latency (CL)
* 0 = 3 DCLK CAS# latency
* 1 = 2 DCLK CAS# latency
* [01:01] SDRAM RAS# to CAS# Delay (SRCD)
* 0 = 3 clocks between a row activate and a read or write cmd.
* 1 = 2 clocks between a row activate and a read or write cmd.
* [00:00] SDRAM RAS# Precharge (SRP)
* 0 = 3 clocks of RAS# precharge
* 1 = 2 clocks of RAS# precharge
*/
SDRAMC, 0x0000, 0x0000,
/* PGPOL - Paging Policy Register
* 0x78 - 0x79
*
* [15:08] Banks per Row (BPR)
* TODO
* 0 = 2 banks
* 1 = 4 banks
* [07:05] Reserved
* [04:04] Intel Reserved
* [03:00] DRAM Idle Timer (DIT)
* 0000 = 0 clocks
* 0001 = 2 clocks
* 0010 = 4 clocks
* 0011 = 8 clocks
* 0100 = 10 clocks
* 0101 = 12 clocks
* 0110 = 16 clocks
* 0111 = 32 clocks
* 1xxx = Infinite (pages are not closed for idle condition)
*/
// TODO
PGPOL, 0x0000, 0xff00,
/* PMCR - Power Management Control Register
* 0x7a
*
* [07:07] Power Down SDRAM Enable (PDSE)
* 1 = Enable
* 0 = Disable
* [06:06] ACPI Control Register Enable (SCRE)
* 1 = Enable
* 0 = Disable (default)
* [05:05] Suspend Refresh Type (SRT)
* 1 = Self refresh mode
* 0 = CBR fresh mode
* [04:04] Normal Refresh Enable (NREF_EN)
* 1 = Enable
* 0 = Disable
* [03:03] Quick Start Mode (QSTART)
* 1 = Quick start mode for the processor is enabled
* [02:02] Gated Clock Enable (GCLKEN)
* 1 = Enable
* 0 = Disable
* [01:01] AGP Disable (AGP_DIS)
* 1 = Disable
* 0 = Enable
* [00:00] CPU reset without PCIRST enable (CRst_En)
* 1 = Enable
* 0 = Disable
*/
/* Enable normal refresh and the gated clock. */
// TODO: Only do this later?
// PMCR, 0x00, 0x14,
// PMCR, 0x00, 0x10,
PMCR, 0x00, 0x00,
};
/*-----------------------------------------------------------------------------
SDRAM configuration functions.
-----------------------------------------------------------------------------*/
/**
* Send the specified RAM command to all DIMMs.
*
* @param Memory controller
* @param TODO
* @param TODO
*/
static void do_ram_command(const struct mem_controller *ctrl,
uint32_t command, uint32_t addr_offset)
{
int i;
uint16_t reg;
/* TODO: Support for multiple DIMMs. */
/* Configure the RAM command. */
reg = pci_read_config16(ctrl->d0, SDRAMC);
reg &= 0xff1f; /* Clear bits 7-5. */
reg |= (uint16_t) (command << 5);
pci_write_config16(ctrl->d0, SDRAMC, reg);
/* RAM_COMMAND_NORMAL affects only the memory controller and
doesn't need to be "sent" to the DIMMs. */
/* if (command == RAM_COMMAND_NORMAL) return; */
PRINT_DEBUG(" Sending RAM command 0x");
PRINT_DEBUG_HEX16(reg);
PRINT_DEBUG(" to 0x");
PRINT_DEBUG_HEX32(0 + addr_offset); // FIXME
PRINT_DEBUG("\r\n");
/* Read from (DIMM start address + addr_offset). */
read32(0 + addr_offset); // FIXME
}
static int
spd_num_chips(unsigned char slot)
{
/* unsigned int module = ((0x50 + slot) << 1) + 1; */
unsigned int module = 0x50 + slot;
unsigned int width;
/*-----------------------------------------------------------------------------
DIMM-independant configuration functions.
-----------------------------------------------------------------------------*/
width = smbus_read_byte(module, 13);
if (width == 0)
width = 8;
return 64 / width;
/**
* TODO.
*
* @param Memory controller
*/
static void spd_enable_refresh(const struct mem_controller *ctrl)
{
int i, value;
uint8_t reg;
reg = pci_read_config8(ctrl->d0, DRAMC);
for (i = 0; i < DIMM_SOCKETS; i++) {
value = spd_read_byte(ctrl->channel0[i], SPD_REFRESH);
if (value < 0)
continue;
reg = (reg & 0xf8) | refresh_rate_map[(value & 0x7f)];
PRINT_DEBUG(" Enabling refresh (DRAMC = 0x");
PRINT_DEBUG_HEX8(reg);
PRINT_DEBUG(") for DIMM ");
PRINT_DEBUG_HEX8(i);
PRINT_DEBUG("\r\n");
}
pci_write_config8(ctrl->d0, DRAMC, reg);
}
/*-----------------------------------------------------------------------------
Public interface.
-----------------------------------------------------------------------------*/
/**
* TODO.
*
* @param Memory controller
*/
static void sdram_set_registers(const struct mem_controller *ctrl)
{
int i, max;
uint32_t reg;
PRINT_DEBUG("Northbridge prior to SDRAM init:\r\n");
DUMPNORTH();
max = sizeof(register_values) / sizeof(register_values[0]);
/* Set registers as specified in the register_values array. */
for (i = 0; i < max; i += 3) {
reg = pci_read_config32(ctrl->d0, register_values[i]);
reg &= register_values[i + 1];
reg |= register_values[i + 2] & ~(register_values[i + 1]);
pci_write_config32(ctrl->d0, register_values[i], reg);
PRINT_DEBUG(" Set register 0x");
PRINT_DEBUG_HEX32(register_values[i]);
PRINT_DEBUG(" to 0x");
PRINT_DEBUG_HEX32(reg);
PRINT_DEBUG("\r\n");
}
}
/**
* TODO.
*
* @param Memory controller
*/
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
#define T133 7
unsigned char Trp = 1, Tras = 1, casl = 2, val;
unsigned char timing = 0xe4;
/* read Trp */
val = smbus_read_byte(0x50, 27);
if (val < 2*T133)
Trp = 1;
val = smbus_read_byte(0x50, 30);
if (val < 5*T133)
Tras = 0;
val = smbus_read_byte(0x50, 18);
if (val < 8)
casl = 1;
if (val < 4)
casl = 0;
val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
print_debug_hex8(val); print_debug(" is the computed timing\n");
/* don't set it. Experience shows that this screwy chipset should just
* be run with the most conservative timing.
* pci_write_config8(0, 0x64, val);
*/
/* TODO: Don't hardcode the values here, get info via SPD. */
/* TODO: Set DRB0-DRB7. */
pci_write_config8(ctrl->d0, DRB0, 0x08);
pci_write_config8(ctrl->d0, DRB1, 0x08);
pci_write_config8(ctrl->d0, DRB2, 0x08);
pci_write_config8(ctrl->d0, DRB3, 0x08);
pci_write_config8(ctrl->d0, DRB4, 0x08);
pci_write_config8(ctrl->d0, DRB5, 0x08);
pci_write_config8(ctrl->d0, DRB6, 0x08);
pci_write_config8(ctrl->d0, DRB7, 0x08);
/* TODO: Set DRAMC. Don't enable refresh for now. */
pci_write_config8(ctrl->d0, DRAMC, 0x08);
/* TODO: Set RPS. */
pci_write_config16(ctrl->d0, RPS, 0x0001);
/* TODO: Set SDRAMC. */
// pci_write_config16(ctrl->d0, SDRAMC, 0x0000);
/* TODO: Set PGPOL. */
pci_write_config16(ctrl->d0, PGPOL, 0x0107);
/* TODO: Set NBXCFG. */
// pci_write_config32(ctrl->d0, NBXCFG, 0x0100220c);
/* TODO: Set PMCR? */
// pci_write_config8(ctrl->d0, PMCR, 0x14);
// pci_write_config8(ctrl->d0, PMCR, 0x10);
/* TODO? */
// pci_write_config8(ctrl->d0, MLT, 0x40);
// pci_write_config8(ctrl->d0, DRAMT, 0x03);
// pci_write_config8(ctrl->d0, MBSC, 0x03);
// pci_write_config8(ctrl->d0, SCRR, 0x38);
}
static void set_ma_mapping(device_t north, int slot, int type)
/**
* Enable SDRAM.
*
* @param Number of controllers
* @param Memory controller
*/
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
unsigned char reg, val;
int shift;
int i;
reg = 0x58 + slot/2;
if (slot%2 >= 1)
shift = 0;
else
shift = 4;
/* TODO: Use a delay here? Needed? */
mdelay(200);
val = pci_read_config8(north, reg);
val &= ~(0xf << shift);
val |= type << shift;
pci_write_config8(north, reg, val);
}
/* TODO: How long should the delays be? Fix later. */
/* 1. Apply NOP. */
PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n");
do_ram_command(ctrl, RAM_COMMAND_NOP, 0);
mdelay(10);
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
unsigned char i;
static const uint8_t ramregs[] = {
0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
};
device_t north = 0;
uint32_t size, base, slot, ma;
/* begin to initialize*/
// I forget why we need this, but we do
dimms_write(0xa55a5aa5);
/* set NOP*/
pci_write_config8(north,0x6C, 0x01);
print_debug("NOP\r\n");
/* wait 200us*/
// You need to do the memory reference. That causes the nop cycle.
dimms_read(0);
udelay(400);
print_debug("PRECHARGE\r\n");
/* set precharge */
pci_write_config8(north,0x6C, 0x02);
print_debug("DUMMY READS\r\n");
/* dummy reads*/
dimms_read(0);
udelay(200);
print_debug("CBR\r\n");
/* set CBR*/
pci_write_config8(north,0x6C, 0x04);
/* do 8 reads and wait >100us between each - from via*/
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
dimms_read(0);
udelay(200);
print_debug("MRS\r\n");
/* set MRS*/
pci_write_config8(north,0x6c, 0x03);
#if DIMM_CL2
dimms_read(0x150);
#else // CL=3
dimms_read(0x1d0);
#endif
udelay(200);
print_debug("NORMAL\r\n");
/* set to normal mode */
pci_write_config8(north,0x6C, 0x08);
dimms_write(0x55aa55aa);
dimms_read(0);
udelay(200);
print_debug("set ref. rate\r\n");
// Set the refresh rate.
#if DIMM_PC133
pci_write_config8(north,0x6A, 0x86);
#else
pci_write_config8(north,0x6A, 0x65);
#endif
print_debug("enable multi-page open\r\n");
// enable multi-page open
pci_write_config8(north,0x6B, 0x0d);
base = 0;
for(slot = 0; slot < 4; slot++) {
size = spd_module_size(slot);
/* side 0 */
base += size & 0xffff;
pci_write_config8(north, ramregs[2*slot], base);
/* side 1 */
base += size >> 16;
if (base > 0xff)
base = 0xff;
pci_write_config8(north, ramregs[2*slot + 1], base);
/* 2. Precharge all. Wait tRP. */
PRINT_DEBUG("RAM Enable 2: Precharge all\r\n");
do_ram_command(ctrl, RAM_COMMAND_PRECHARGE, 0);
mdelay(10);
if (!size)
continue;
/* Calculate the value of MA mapping type register,
* based on size of SDRAM chips. */
size = (size & 0xffff) << (3 + 3);
/* convert module size to be in Mbits */
size /= spd_num_chips(slot);
print_debug_hex16(size);
print_debug(" is the chip size\r\n");
if (size < 64)
ma = 0;
if (size < 256)
ma = 8;
else
ma = 0xe;
print_debug_hex16(ma);
print_debug(" is the MA type\r\n");
set_ma_mapping(north, slot, ma);
/* 3. Perform 8 refresh cycles. Wait tRC each time. */
PRINT_DEBUG("RAM Enable 3: CBR\r\n");
for (i = 0; i < 8; i++) {
do_ram_command(ctrl, RAM_COMMAND_CBR, 0);
mdelay(10);
}
print_err("vt8601 done\r\n");
/* 4. Mode register set. Wait two memory cycles. */
PRINT_DEBUG("RAM Enable 4: Mode register set\r\n");
do_ram_command(ctrl, RAM_COMMAND_MRS, 0x1d0);
// TODO: Is 0x1d0 correct?
// do_ram_command(ctrl, RAM_COMMAND_MRS, 0x1d0000);
mdelay(10);
mdelay(10);
/* 5. Normal operation. */
PRINT_DEBUG("RAM Enable 5: Normal operation\r\n");
do_ram_command(ctrl, RAM_COMMAND_NORMAL, 0);
mdelay(10);
/* 6. Finally enable refresh. */
PRINT_DEBUG("RAM Enable 6: Enable refresh\r\n");
// pci_write_config8(ctrl->d0, PMCR, 0x10);
spd_enable_refresh(ctrl);
mdelay(10);
PRINT_DEBUG("Northbridge following SDRAM init:\r\n");
DUMPNORTH();
}

30
src/northbridge/intel/i440bx/raminit.h
View File

@ -1,11 +1,33 @@
/*
* This file is part of the LinuxBIOS project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef RAMINIT_H
#define RAMINIT_H
/* The 440BX supports up to four (single- or double-sided) DIMMs. */
#define DIMM_SOCKETS 4
/* The 440BX memory controller has one channel only. */
struct mem_controller {
device_t d0;
uint16_t channel0[DIMM_SOCKETS];
device_t d0;
uint16_t channel0[DIMM_SOCKETS];
};
#endif /* RAMINIT_H */
#endif /* RAMINIT_H */