Skylake: Initialize GPIOs for UART2

FSP will initialize GPIOs during TempRamInit.
So configure LPSS UART2 GPIOs in native mode
after TempRamInit.

BRANCH=none
BUG=chrome-os-partner:41374
EST=Build and boot on RVP3. Check LPSS logs on UART2

Change-Id: I8016dd76a5bc06e90f9460273be7e83c5e8f8bb1
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: eb72e715ef3f566e900727ac8b9494bca1d5971c
Original-Change-Id: If1b1a1047ebd5e5f170d91972d11c51aa6fd84a9
Original-Signed-off-by: rsatapat <rishavnath.satapathy@intel.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/281604
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Wenkai Du <wenkai.du@intel.com>
Original-Tested-by: Wenkai Du <wenkai.du@intel.com>
Reviewed-on: http://review.coreboot.org/10995
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
rsatapat 2015-06-24 20:49:16 +05:30 committed by Patrick Georgi
parent 5c56ce13f4
commit 1b9635de66
2 changed files with 74 additions and 2 deletions

View File

@ -257,6 +257,18 @@ typedef struct {
.owner = GPIO_OWNER_GPIO, \ .owner = GPIO_OWNER_GPIO, \
.conf1 = GPIO_SENSE_DISABLE } .conf1 = GPIO_SENSE_DISABLE }
/* Number of pins used by SerialIo controllers */
#define PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER 4
#define PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER_NO_FLOW_CTRL 2
/* Below defines are based on GPIO_CONFIG structure fields */
#define GPIO_CONF_PAD_MODE_MASK 0xF
#define GPIO_CONF_PAD_MODE_BIT_POS 0
/* GPIO Pad Mode */
#define B_PCH_GPIO_PAD_MODE (0x1000 | 0x800 | 0x400)
#define N_PCH_GPIO_PAD_MODE 10
struct gpio_config { struct gpio_config {
u8 gpio; u8 gpio;
u32 conf0; u32 conf0;

View File

@ -25,6 +25,9 @@
#include <soc/pcr.h> #include <soc/pcr.h>
#include <soc/romstage.h> #include <soc/romstage.h>
#include <soc/serialio.h> #include <soc/serialio.h>
#include <gpio.h>
static void uartgpioinit(u8 hwflowcontrol);
void pch_uart_init(void) void pch_uart_init(void)
{ {
@ -32,7 +35,7 @@ void pch_uart_init(void)
u32 tmp; u32 tmp;
u8 *base = (u8 *)CONFIG_TTYS0_BASE; u8 *base = (u8 *)CONFIG_TTYS0_BASE;
/* Set configured UART base address */ /* Set configured UART2 base address */
pci_write_config32(dev, PCI_BASE_ADDRESS_0, (u32)base); pci_write_config32(dev, PCI_BASE_ADDRESS_0, (u32)base);
/* Enable memory access and bus master */ /* Enable memory access and bus master */
@ -40,7 +43,7 @@ void pch_uart_init(void)
tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
pci_write_config32(dev, PCI_COMMAND, tmp); pci_write_config32(dev, PCI_COMMAND, tmp);
/* Take UART out of reset */ /* Take UART2 out of reset */
tmp = read32(base + SIO_REG_PPR_RESETS); tmp = read32(base + SIO_REG_PPR_RESETS);
tmp |= SIO_REG_PPR_RESETS_FUNC | SIO_REG_PPR_RESETS_APB | tmp |= SIO_REG_PPR_RESETS_FUNC | SIO_REG_PPR_RESETS_APB |
SIO_REG_PPR_RESETS_IDMA; SIO_REG_PPR_RESETS_IDMA;
@ -56,4 +59,61 @@ void pch_uart_init(void)
/* Put UART2 in byte access mode for 16550 compatibility */ /* Put UART2 in byte access mode for 16550 compatibility */
pcr_andthenor32(PID_SERIALIO, R_PCH_PCR_SERIAL_IO_GPPRVRW7, 0, pcr_andthenor32(PID_SERIALIO, R_PCH_PCR_SERIAL_IO_GPPRVRW7, 0,
SIO_PCH_LEGACY_UART2); SIO_PCH_LEGACY_UART2);
/* Configure GPIO for UART2 in native mode*/
uartgpioinit(FALSE);
}
/*
* GPIO modes
*/
typedef struct {
GPIO_PAD pad;
GPIO_PAD_MODE mode;
} GPIO_PAD_NATIVE_FUNCTION;
/*
* GPP_C Community for UART2 GPIO
* pin order RXD/TXD/RTSB/CTSB
*/
static const GPIO_PAD_NATIVE_FUNCTION uartgpio[] = {
{GPIO_LP_GPP_C20, GpioPadModeNative1},
{GPIO_LP_GPP_C21, GpioPadModeNative1},
{GPIO_LP_GPP_C22, GpioPadModeNative1},
{GPIO_LP_GPP_C23, GpioPadModeNative1}
};
/*
* GPIO config registers
*/
static const GPIO_GROUP_INFO gpio_group_info = {
PID_GPIOCOM1,
R_PCH_PCR_GPIO_GPP_C_PADCFG_OFFSET,
V_PCH_GPIO_GPP_C_PAD_MAX,
R_PCH_PCR_GPIO_GPP_C_SMI_STS,
R_PCH_PCR_GPIO_GPP_C_SMI_EN
};
static void uartgpioinit(u8 hwflowcontrol)
{
u32 index, pinsused, dw0reg, dw0regmask, padcfgreg, padnumber;
if (hwflowcontrol)
pinsused = PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER;
else
pinsused = PCH_SERIAL_IO_PINS_PER_UART_CONTROLLER_NO_FLOW_CTRL;
for (index = 0; index < pinsused; index++) {
padnumber = GPIO_GET_PAD_NUMBER(uartgpio[index].pad);
padcfgreg = 0x8 * padnumber + gpio_group_info.padcfgoffset;
dw0regmask = (uartgpio[index].mode & GPIO_CONF_PAD_MODE_MASK)
>> GPIO_CONF_PAD_MODE_BIT_POS;
dw0regmask = (GpioHardwareDefault == dw0regmask) ?
0x0 : B_PCH_GPIO_PAD_MODE;
dw0reg = (((uartgpio[index].mode & GPIO_CONF_PAD_MODE_MASK) >>
(GPIO_CONF_PAD_MODE_BIT_POS + 1)) << N_PCH_GPIO_PAD_MODE);
pcr_andthenor32(gpio_group_info.community, padcfgreg,
~(u32)dw0regmask, (u32)dw0reg);
}
} }