Drop HAVE_MAINBOARD_RESOURCES

These existed to provide a hook to add reserved memory regions
in the coreboot memory table. Reserved memory are now
added as resources.

Change-Id: I9f83df33845cfa6973b018a51cf9444dbf0f8667
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/1414
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Peter Stuge <peter@stuge.se>

src/Kconfig

@@ -292,10 +292,6 @@ config HIGH_SCRATCH_MEMORY_SIZE
 	hex
 	default 0x0
 
-config HAVE_MAINBOARD_RESOURCES
-	bool
-	default n
-
 config USE_OPTION_TABLE
 	bool
 	default n

src/arch/x86/boot/coreboot_table.c

@@ -667,10 +667,6 @@ unsigned long write_coreboot_table(
 	/* Add reserved regions */
 	add_lb_reserved(mem);
 
-#if CONFIG_HAVE_MAINBOARD_RESOURCES
-	add_mainboard_resources(mem);
-#endif
-
 	lb_dump_memory_ranges(mem);
 
 	/* Note:

src/arch/x86/include/arch/coreboot_tables.h

@@ -16,10 +16,6 @@ void lb_memory_range(struct lb_memory *mem,
  */
 struct lb_memory *get_lb_mem(void);
 
-/* defined by mainboard.c if the mainboard requires extra resources */
-int add_mainboard_resources(struct lb_memory *mem);
-int add_northbridge_resources(struct lb_memory *mem);
-
 void fill_lb_gpios(struct lb_gpios *gpios);
 
 #endif /* COREBOOT_TABLE_H */

src/mainboard/advansus/a785e-i/Kconfig

@@ -16,7 +16,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_BUS_CONFIG
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID

src/mainboard/advansus/a785e-i/mainboard.c

@@ -82,11 +82,6 @@ static void a785e_i_enable(device_t dev)
 	enable_int_gfx();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("ADVANSUS A785E-I Mainboard")
 	.enable_dev = a785e_i_enable,

src/mainboard/amd/bimini_fam10/Kconfig

@@ -17,7 +17,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select GENERATE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/amd/bimini_fam10/mainboard.c

@@ -133,11 +133,6 @@ static void bimini_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD Bimini Mainboard")
 	.enable_dev = bimini_enable,

src/mainboard/amd/dbm690t/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_MP_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_OPTION_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_BUS_CONFIG
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select BOARD_ROMSIZE_KB_1024

src/mainboard/amd/dbm690t/mainboard.c

@@ -190,11 +190,6 @@ static void dbm690t_enable(device_t dev)
 	set_thermal_config();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD DBM690T   Mainboard")
 	.enable_dev = dbm690t_enable,

src/mainboard/amd/dinar/Kconfig

@@ -38,7 +38,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select HAVE_ACPI_TABLES
 	#TODO select HAVE_ACPI_RESUME

src/mainboard/amd/dinar/mainboard.c

@@ -74,10 +74,6 @@ static void dinar_enable(device_t dev)
 	printk(BIOS_INFO, "Mainboard Dinar Enable. dev=0x%p\n", dev);
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD DINAR Mainboard")
 		.enable_dev = dinar_enable,

src/mainboard/amd/inagua/Kconfig

@@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID

src/mainboard/amd/inagua/mainboard.c

@@ -82,10 +82,6 @@ static void inagua_enable(device_t dev)
 	set_pcie_dereset();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 		.enable_dev = inagua_enable,

src/mainboard/amd/mahogany/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_MP_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_OPTION_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_BUS_CONFIG
 	select LIFT_BSP_APIC_ID
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY

src/mainboard/amd/mahogany/mainboard.c

@@ -106,11 +106,6 @@ static void mahogany_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD MAHOGANY   Mainboard")
 	.enable_dev = mahogany_enable,

src/mainboard/amd/mahogany_fam10/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/amd/mahogany_fam10/mainboard.c

@@ -107,11 +107,6 @@ static void mahogany_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD MAHOGANY   Mainboard")
 	.enable_dev = mahogany_enable,

src/mainboard/amd/parmer/Kconfig

@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_ACPI_RESUME
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY

src/mainboard/amd/parmer/mainboard.c

@@ -47,10 +47,6 @@ static void parmer_enable(device_t dev)
 #endif
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = parmer_enable,

src/mainboard/amd/persimmon/Kconfig

@@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_ACPI_RESUME
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY

src/mainboard/amd/persimmon/mainboard.c

@@ -66,11 +66,6 @@ static void persimmon_enable(device_t dev)
 #endif
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = persimmon_enable,

src/mainboard/amd/pistachio/mainboard.c

@@ -259,11 +259,6 @@ static void pistachio_enable(device_t dev)
 	set_thermal_config();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD Pistachio Mainboard")
 	.enable_dev = pistachio_enable,

src/mainboard/amd/south_station/Kconfig

@@ -31,7 +31,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID

src/mainboard/amd/south_station/mainboard.c

@@ -82,10 +82,6 @@ static void southstation_enable(device_t dev)
 	southstation_led_init();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = southstation_enable,

src/mainboard/amd/thatcher/Kconfig

@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_ACPI_RESUME
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY

src/mainboard/amd/thatcher/mainboard.c

@@ -64,10 +64,6 @@ static void thatcher_enable(device_t dev)
 #endif
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = thatcher_enable,

src/mainboard/amd/tilapia_fam10/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/amd/tilapia_fam10/mainboard.c

@@ -284,11 +284,6 @@ static void tilapia_enable(device_t dev)
 	set_gpio40_gfx();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD TILAPIA   Mainboard")
 	.enable_dev = tilapia_enable,

src/mainboard/amd/torpedo/Kconfig

@@ -34,7 +34,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
         select HAVE_OPTION_TABLE
         select HAVE_PIRQ_TABLE
         select HAVE_MP_TABLE
-        select HAVE_MAINBOARD_RESOURCES
         select HAVE_HARD_RESET
         select SB_HT_CHAIN_UNITID_OFFSET_ONLY
         select LIFT_BSP_APIC_ID

src/mainboard/amd/torpedo/mainboard.c

@@ -58,10 +58,6 @@ static void torpedo_enable(device_t dev)
   printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable. dev=0x%p\n", dev);
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-  return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
   .enable_dev = torpedo_enable,

src/mainboard/amd/union_station/Kconfig

@@ -30,7 +30,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID

src/mainboard/amd/union_station/mainboard.c

@@ -55,10 +55,6 @@ static void unionstation_enable(device_t dev)
 	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = unionstation_enable,

src/mainboard/asrock/939a785gmh/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_ACPI_RESUME
 	select HAVE_MP_TABLE
 	select HAVE_PIRQ_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_OPTION_TABLE
 	select HAVE_BUS_CONFIG
 	select LIFT_BSP_APIC_ID

src/mainboard/asrock/939a785gmh/mainboard.c

@@ -104,11 +104,6 @@ static void mb_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("Asrock 939A785GMH/128M Mainboard")
 	.enable_dev = mb_enable,

src/mainboard/asrock/e350m1/Kconfig

@@ -32,7 +32,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
         select HAVE_OPTION_TABLE
         select HAVE_PIRQ_TABLE
         select HAVE_MP_TABLE
-        select HAVE_MAINBOARD_RESOURCES
         select HAVE_HARD_RESET
         select SB_HT_CHAIN_UNITID_OFFSET_ONLY
         select LIFT_BSP_APIC_ID

src/mainboard/asrock/e350m1/mainboard.c

@@ -54,10 +54,6 @@ static void e350m1_enable(device_t dev)
 	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = e350m1_enable,

src/mainboard/asus/m2v-mx_se/Kconfig

@@ -36,7 +36,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select RAMINIT_SYSINFO
 	select VGA
 	select HAVE_ACPI_RESUME
-	select HAVE_MAINBOARD_RESOURCES
 	select QRANK_DIMM_SUPPORT
 	select SET_FIDVID
 	# TODO test on multicore machines and enable if it works:

src/mainboard/asus/m2v-mx_se/mainboard.c

@@ -23,11 +23,6 @@
 #include <boot/tables.h>
 #include <southbridge/via/k8t890/k8t890.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("ASUS M2V-MX SE Mainboard")
 };

src/mainboard/asus/m5a88-v/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_BUS_CONFIG
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID

src/mainboard/asus/m5a88-v/mainboard.c

@@ -83,11 +83,6 @@ static void m5a88pm_v_enable(device_t dev)
 	enable_int_gfx();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("ASUS M5A88-V Mainboard")
 	.enable_dev = m5a88pm_v_enable,

src/mainboard/asus/mew-am/Kconfig

@@ -28,7 +28,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/asus/mew-am/mainboard.c

@@ -21,11 +21,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("ASUS MEW-AM Mainboard")
 };

src/mainboard/asus/mew-vm/Kconfig

@@ -29,7 +29,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/asus/mew-vm/mainboard.c

@@ -1,11 +1,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("ASUS MEW-VM Mainboard")
 };

src/mainboard/avalue/eax-785e/Kconfig

@@ -16,7 +16,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_BUS_CONFIG
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_HARD_RESET
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID

src/mainboard/avalue/eax-785e/mainboard.c

@@ -82,11 +82,6 @@ static void eax_785e(device_t dev)
 	enable_int_gfx();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 	.enable_dev = eax_785e,

src/mainboard/ecs/p6iwp-fe/Kconfig

@@ -29,7 +29,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/ecs/p6iwp-fe/mainboard.c

@@ -21,11 +21,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("ECS P6IWP-Fe Mainboard")
 };

src/mainboard/gigabyte/ma785gm/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/gigabyte/ma785gm/mainboard.c

@@ -144,11 +144,6 @@ static void ma785gm_enable(device_t dev)
 	set_gpio40_gfx();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("GIGABYTE MA785GM-US2H   Mainboard")
 	.enable_dev = ma785gm_enable,

src/mainboard/gigabyte/ma785gmt/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/gigabyte/ma785gmt/mainboard.c

@@ -255,11 +255,6 @@ static void ma785gmt_enable(device_t dev)
 	set_gpio40_gfx();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("GIGABYTE MA785GMT-UD2H   Mainboard")
 	.enable_dev = ma785gmt_enable,

src/mainboard/gigabyte/ma78gm/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/gigabyte/ma78gm/mainboard.c

@@ -80,11 +80,6 @@ static void ma78gm_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("GIGABYTE MA78GM-US2H")
 	.enable_dev = ma78gm_enable,

src/mainboard/hp/e_vectra_p2706t/Kconfig

@@ -32,7 +32,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/hp/e_vectra_p2706t/mainboard.c

@@ -21,11 +21,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("HP e-Vectra P2706T Mainboard")
 };

src/mainboard/iei/kino-780am2-fam10/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/iei/kino-780am2-fam10/mainboard.c

@@ -62,11 +62,6 @@ static void kino_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("IEI Kino-780AM2 Mainboard")
 	.enable_dev = kino_enable,

src/mainboard/intel/d810e2cb/Kconfig

@@ -29,7 +29,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select USE_WATCHDOG_ON_BOOT
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/intel/d810e2cb/mainboard.c

@@ -20,11 +20,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("Intel D810E2CB Mainboard")
 };

src/mainboard/intel/eagleheights/mainboard.c

@@ -24,11 +24,6 @@
 #include <boot/tables.h>
 #include <arch/coreboot_tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("Intel Eagle Heights Mainboard")
 };

src/mainboard/intel/emeraldlake2/Kconfig

@@ -12,7 +12,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_ACPI_TABLES
 	select HAVE_OPTION_TABLE
 	select HAVE_ACPI_RESUME
-	select HAVE_MAINBOARD_RESOURCES
 	select MMCONF_SUPPORT
 	select HAVE_SMI_HANDLER
 	select GFXUMA

src/mainboard/intel/emeraldlake2/mainboard.c

@@ -42,11 +42,6 @@ void mainboard_suspend_resume(void)
 	outb(0xcb, 0xb2);
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 #if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE
 static int int15_handler(struct eregs *regs)
 {

src/mainboard/jetway/pa78vm5/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_OPTION_TABLE
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select SB_HT_CHAIN_UNITID_OFFSET_ONLY
 	select LIFT_BSP_APIC_ID
 	select SERIAL_CPU_INIT

src/mainboard/jetway/pa78vm5/mainboard.c

@@ -109,11 +109,6 @@ static void pa78vm5_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD PA78VM5 Mainboard")
 	.enable_dev = pa78vm5_enable,

src/mainboard/kontron/kt690/Kconfig

@@ -14,7 +14,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_BUS_CONFIG
 	select HAVE_PIRQ_TABLE
 	select HAVE_MP_TABLE
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 	select HAVE_ACPI_TABLES
 	select BOARD_ROMSIZE_KB_1024

src/mainboard/kontron/kt690/mainboard.c

@@ -190,11 +190,6 @@ static void kt690_enable(device_t dev)
 	set_thermal_config();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("Kontron KT690/mITX Mainboard")
 	.enable_dev = kt690_enable,

src/mainboard/mitac/6513wu/Kconfig

@@ -28,7 +28,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/mitac/6513wu/mainboard.c

@@ -21,11 +21,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("Mitac 6513WU Mainboard")
 };

src/mainboard/msi/ms6178/Kconfig

@@ -27,7 +27,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select SUPERIO_WINBOND_W83627HF
 	select HAVE_PIRQ_TABLE
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/msi/ms6178/mainboard.c

@@ -21,11 +21,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("MSI MS-6178 Mainboard")
 };

src/mainboard/nec/powermate2000/Kconfig

@@ -28,7 +28,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select GFXUMA
 
 config MAINBOARD_DIR

src/mainboard/nec/powermate2000/mainboard.c

@@ -21,11 +21,6 @@
 #include <device/device.h>
 #include <boot/tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("NEC PowerMate 2000 Mainboard")
 };

src/mainboard/rca/rm4100/Kconfig

@@ -10,7 +10,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_1024
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_SMI_HANDLER
 	select GFXUMA
 

src/mainboard/rca/rm4100/mainboard.c

@@ -22,11 +22,6 @@
 #include <boot/tables.h>
 #include <arch/coreboot_tables.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 static void mainboard_init(device_t dev)
 {
 	// TODO Switch parport LEDs again

src/mainboard/samsung/lumpy/Kconfig

@@ -12,7 +12,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select GFXUMA
 	select HAVE_ACPI_RESUME
 	select HAVE_ACPI_TABLES
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_OPTION_TABLE
 	select HAVE_SMI_HANDLER
 	select MMCONF_SUPPORT

src/mainboard/samsung/lumpy/mainboard.c

@@ -49,11 +49,6 @@ void mainboard_suspend_resume(void)
 	send_ec_command(EC_ACPI_ENABLE);
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 #if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE
 static int int15_handler(struct eregs *regs)
 {

src/mainboard/samsung/stumpy/Kconfig

@@ -11,7 +11,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select GFXUMA
 	select HAVE_ACPI_RESUME
 	select HAVE_ACPI_TABLES
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_OPTION_TABLE
 	select HAVE_SMI_HANDLER
 	select MMCONF_SUPPORT

src/mainboard/samsung/stumpy/mainboard.c

@@ -42,11 +42,6 @@ void mainboard_suspend_resume(void)
 	outb(0xcb, 0xb2);
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 #if defined(CONFIG_PCI_OPTION_ROM_RUN_REALMODE) && CONFIG_PCI_OPTION_ROM_RUN_REALMODE
 static int int15_handler(struct eregs *regs)
 {

src/mainboard/supermicro/h8qgi/mainboard.c

@@ -71,13 +71,6 @@ static void h8qgi_enable(device_t dev)
 	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
 }
 
-#if CONFIG_HAVE_MAINBOARD_RESOURCES
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-#endif
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
 		.enable_dev = h8qgi_enable,

src/mainboard/supermicro/h8scm_fam10/mainboard.c

@@ -92,13 +92,6 @@ static void h8scm_enable(device_t dev)
 	/* get_ide_dma66(); */
 }
 
-#if CONFIG_HAVE_MAINBOARD_RESOURCES
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-#endif
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("AMD H8SCM   Mainboard")
 	.enable_dev = h8scm_enable,

src/mainboard/technexion/tim8690/mainboard.c

@@ -149,11 +149,6 @@ static void tim8690_enable(device_t dev)
 	set_thermal_config();
 }
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 struct chip_operations mainboard_ops = {
 	CHIP_NAME("TechNexion TIM-8690   Mainboard")
 	.enable_dev = tim8690_enable,

src/mainboard/thomson/ip1000/Kconfig

@@ -10,7 +10,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_PIRQ_TABLE
 	select UDELAY_TSC
 	select BOARD_ROMSIZE_KB_512
-	select HAVE_MAINBOARD_RESOURCES
 	select HAVE_SMI_HANDLER
 	select GFXUMA
 

src/mainboard/thomson/ip1000/mainboard.c

@@ -28,11 +28,6 @@
 #include <arch/coreboot_tables.h>
 #include <arch/io.h>
 
-int add_mainboard_resources(struct lb_memory *mem)
-{
-	return 0;
-}
-
 // setting the bit disables the led.
 #define PARPORT_GPIO_LED_GREEN	(1 << 0)
 #define PARPORT_GPIO_LED_ORANGE	(1 << 1)