lynxpoint: Move ME lock down to ramstage

Now that we have RW ramstage we don't need to have the
management engine lock down step done in a final SMM.

ME: mkhi_end_of_post
ME: END OF POST message successful (0)
PCI: 00:16.0: Disabling device

Change-Id: I9db4e72e38be58cc875c1622a966d8fcacc83280
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://gerrit.chromium.org/gerrit/49757
Reviewed-on: http://review.coreboot.org/4153
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

src/mainboard/google/slippy/smihandler.c

@@ -133,7 +133,6 @@ int mainboard_smi_apmc(u8 apmc)
 			return 0;
 		}
 
-		intel_me_finalize_smm();
 		intel_pch_finalize_smm();
 		intel_northbridge_haswell_finalize_smm();
 		intel_cpu_haswell_finalize_smm();

src/mainboard/intel/baskingridge/mainboard_smi.c

@@ -84,7 +84,6 @@ int mainboard_smi_apmc(u8 apmc)
 			return 0;
 		}
 
-		intel_me_finalize_smm();
 		intel_pch_finalize_smm();
 		intel_northbridge_haswell_finalize_smm();
 		intel_cpu_haswell_finalize_smm();

src/mainboard/intel/wtm2/mainboard_smi.c

@@ -60,7 +60,6 @@ int mainboard_smi_apmc(u8 apmc)
 			return 0;
 		}
 
-		intel_me_finalize_smm();
 		intel_pch_finalize_smm();
 		intel_northbridge_haswell_finalize_smm();
 		intel_cpu_haswell_finalize_smm();

src/southbridge/intel/lynxpoint/Makefile.inc

@@ -46,7 +46,7 @@ ramstage-y += spi.c
 smm-$(CONFIG_SPI_FLASH_SMM) += spi.c
 
 ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c pmutil.c
-smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c me_9.x.c finalize.c pch.c
+smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c finalize.c pch.c
 smm-$(CONFIG_HAVE_SMI_HANDLER) += pmutil.c
 
 romstage-y += early_usb.c early_smbus.c early_me.c me_status.c early_pch.c

src/southbridge/intel/lynxpoint/me_9.x.c

@@ -47,7 +47,6 @@
 #include <vendorcode/google/chromeos/gnvs.h>
 #endif
 
-#ifndef __SMM__
 /* Path that the BIOS should take based on ME state */
 static const char *me_bios_path_values[] = {
 	[ME_NORMAL_BIOS_PATH]		= "Normal",
@@ -58,7 +57,6 @@ static const char *me_bios_path_values[] = {
 	[ME_FIRMWARE_UPDATE_BIOS_PATH]	= "Firmware Update",
 };
 static int intel_me_read_mbp(me_bios_payload *mbp_data, device_t dev);
-#endif
 
 /* MMIO base address for MEI interface */
 static u32 mei_base_address;
@@ -116,14 +114,12 @@ static inline void mei_write_dword_ptr(void *ptr, int offset)
 	mei_dump(ptr, dword, offset, "WRITE");
 }
 
-#ifndef __SMM__
 static inline void pci_read_dword_ptr(device_t dev, void *ptr, int offset)
 {
 	u32 dword = pci_read_config32(dev, offset);
 	memcpy(ptr, &dword, sizeof(dword));
 	mei_dump(ptr, dword, offset, "PCI READ");
 }
-#endif
 
 static inline void read_host_csr(struct mei_csr *csr)
 {
@@ -351,7 +347,7 @@ static inline int mei_sendrecv(struct mei_header *mei, struct mkhi_header *mkhi,
 	return 0;
 }
 
-#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG) && !defined(__SMM__)
+#if (CONFIG_DEFAULT_CONSOLE_LOGLEVEL >= BIOS_DEBUG)
 static inline void print_cap(const char *name, int state)
 {
 	printk(BIOS_DEBUG, "ME Capability: %-41s : %sabled\n",
@@ -456,8 +452,6 @@ static int mkhi_global_reset(void)
 }
 #endif
 
-#ifdef __SMM__
-
 /* Send END OF POST message to the ME */
 static int mkhi_end_of_post(void)
 {
@@ -485,43 +479,6 @@ static int mkhi_end_of_post(void)
 	return 0;
 }
 
-void intel_me_finalize_smm(void)
-{
-	struct me_hfs hfs;
-	u32 reg32;
-
-	mei_base_address =
-		pci_read_config32(PCH_ME_DEV, PCI_BASE_ADDRESS_0) & ~0xf;
-
-	/* S3 path will have hidden this device already */
-	if (!mei_base_address || mei_base_address == 0xfffffff0)
-		return;
-
-	/* Make sure ME is in a mode that expects EOP */
-	reg32 = pci_read_config32(PCH_ME_DEV, PCI_ME_HFS);
-	memcpy(&hfs, &reg32, sizeof(u32));
-
-	/* Abort and leave device alone if not normal mode */
-	if (hfs.fpt_bad ||
-	    hfs.working_state != ME_HFS_CWS_NORMAL ||
-	    hfs.operation_mode != ME_HFS_MODE_NORMAL)
-		return;
-
-	/* Try to send EOP command so ME stops accepting other commands */
-	mkhi_end_of_post();
-
-	/* Make sure IO is disabled */
-	reg32 = pci_read_config32(PCH_ME_DEV, PCI_COMMAND);
-	reg32 &= ~(PCI_COMMAND_MASTER |
-		   PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
-	pci_write_config32(PCH_ME_DEV, PCI_COMMAND, reg32);
-
-	/* Hide the PCI device */
-	RCBA32_OR(FD2, PCH_DISABLE_MEI1);
-}
-
-#else /* !__SMM__ */
-
 /* Determine the path that we should take based on ME status */
 static me_bios_path intel_me_path(device_t dev)
 {
@@ -679,6 +636,12 @@ static int intel_me_extend_valid(device_t dev)
 /* Hide the ME virtual PCI devices */
 static void intel_me_hide(device_t dev)
 {
+	/* Make sure IO is disabled */
+	u32 reg32 = pci_read_config32(dev, PCI_COMMAND);
+	reg32 &= ~(PCI_COMMAND_MASTER |
+		   PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
+	pci_write_config32(dev, PCI_COMMAND, reg32);
+
 	dev->enabled = 0;
 	pch_enable(dev);
 }
@@ -729,9 +692,9 @@ static void intel_me_init(device_t dev)
 	}
 #endif
 
-	/*
+	/* Lock down and hide Management Engine */
-	 * Leave the ME unlocked. It will be locked via SMI command later.
+	mkhi_end_of_post();
-	 */
+	intel_me_hide(dev);
 }
 
 static void set_subsystem(device_t dev, unsigned vendor, unsigned device)
@@ -953,5 +916,3 @@ mbp_failure:
 	intel_me_mbp_give_up(dev);
 	return -1;
 }
-
-#endif /* !__SMM__ */