GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

asrock/imb-a180: Switch away from AGESA_LEGACY 

Change-Id: I00bd4d895b2585235bf5b3edd23fbcddba69d31e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/18714
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>
This commit is contained in:
Kyösti Mälkki 2016-12-20 06:43:45 +02:00
parent 2d98120d3b
commit 1dea4b13e8
2 changed files with 12 additions and 85 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
src/mainboard/asrock/imb-a180/Kconfig
View File

@ -17,7 +17,6 @@ if BOARD_ASROCK_IMB_A180
config BOARD_SPECIFIC_OPTIONS # dummy
def_bool y
select AGESA_LEGACY
select CPU_AMD_AGESA_FAMILY16_KB
select NORTHBRIDGE_AMD_AGESA_FAMILY16_KB
select SOUTHBRIDGE_AMD_AGESA_YANGTZE

96
src/mainboard/asrock/imb-a180/romstage.c
View File

@ -21,39 +21,21 @@
#include <arch/io.h>
#include <arch/stages.h>
#include <device/pnp_def.h>
#include <arch/cpu.h>
#include <cpu/x86/lapic.h>
#include <console/console.h>
#include <commonlib/loglevel.h>
#include <cpu/amd/car.h>
#include <northbridge/amd/agesa/agesawrapper.h>
#include <northbridge/amd/agesa/agesa_helper.h>
#include <cpu/x86/bist.h>
#include <cpu/x86/lapic.h>
#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <cpu/amd/agesa/s3_resume.h>
#include "cbmem.h"
#include <superio/winbond/common/winbond.h>
#include <superio/winbond/w83627uhg/w83627uhg.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627UHG_SP1)
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
void board_BeforeAgesa(struct sysinfo *cb)
{
u32 val, t32;
u32 *addr32;
/* In Hudson RRG, PMIOxD2[5:4] is "Drive strength control for
* LpcClk[1:0]". To be consistent with Parmer, setting to 4mA
* even though the register is not documented in the Kabini BKDG.
* Otherwise the serial output is bad code.
*/
//outb(0xD2, 0xcd6);
//outb(0x00, 0xcd7);
/* Must come first to enable PCI MMCONF. */
amd_initmmio();
volatile u32 *addr32;
u32 t32;
/* Set LPC decode enables. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
@ -65,6 +47,10 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
outb(0x24, 0xcd6);
outb(0x1, 0xcd7);
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
outb(0xea, 0xcd6);
outb(0x1, 0xcd7);
/* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */
addr32 = (u32 *)0xfed80e28;
t32 = *addr32;
@ -77,64 +63,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
t32 &= 0xffffbffb;
*addr32 = t32;
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
post_code(0x31);
/* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
}
/* Halt if there was a built in self test failure */
post_code(0x34);
report_bist_failure(bist);
/* Load MPB */
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
/* On Larne, after LpcClkDrvSth is set, it needs some time to be stable, because of the buffer ICS551M */
int i;
for(i = 0; i < 200000; i++)
val = inb(0xcd6);
post_code(0x37);
agesawrapper_amdinitreset();
post_code(0x38);
printk(BIOS_DEBUG, "Got past yangtze_early_setup\n");
post_code(0x39);
agesawrapper_amdinitearly();
int s3resume = acpi_is_wakeup_s3();
if (!s3resume) {
post_code(0x40);
agesawrapper_amdinitpost();
post_code(0x41);
agesawrapper_amdinitenv();
/* TODO: Disable cache is not ok. */
disable_cache_as_ram();
} else { /* S3 detect */
printk(BIOS_INFO, "S3 detected\n");
post_code(0x60);
agesawrapper_amdinitresume();
amd_initcpuio();
agesawrapper_amds3laterestore();
post_code(0x61);
prepare_for_resume();
}
outb(0xEA, 0xCD6);
outb(0x1, 0xcd7);
post_code(0x50);
copy_and_run();
post_code(0x54); /* Should never see this post code. */
/* w83627uhg has a default clk of 48MHz, p.9 of data-sheet */
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}