soc/mediatek: Fix typos in comments

Also add missing whitespace.

Change-Id: I3361122d5232072e68d018e84219a262acf34001
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39027
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>

src/soc/mediatek/common/include/soc/pmic_wrap_common.h

@@ -69,7 +69,7 @@ static inline s32 pwrap_write_nochk(u16 addr, u16 wdata)
 	return pwrap_wacs2(1, addr, wdata, 0, 0);
 }
 
-/* dewrapper defaule value */
+/* dewrapper default value */
 enum {
 	DEFAULT_VALUE_READ_TEST  = 0x5aa5,
 	WRITE_TEST_VALUE         = 0xa55a
@@ -81,7 +81,7 @@ enum {
 	TIMEOUT_WAIT_IDLE_US   = 255
 };
 
-/* manual commnd */
+/* manual command */
 enum {
 	OP_WR    = 0x1,
 	OP_CSH   = 0x0,

src/soc/mediatek/mt8173/dramc_pi_basic_api.c

@@ -450,7 +450,7 @@ static void dramc_set_mrs_value(int channel, int rank,
 	mrs_write(channel, rank, sdram_params->mrs_set.mrs_63, 10);
 	/* MR10 -> ZQ Init, tZQINIT>=1us */
 	mrs_write(channel, rank, sdram_params->mrs_set.mrs_10, 1);
-	/* MR3 driving stregth set to max */
+	/* MR3 driving strength set to max */
 	mrs_write(channel, rank, sdram_params->mrs_set.mrs_3, 1);
 	/* MR1 */
 	mrs_write(channel, rank, sdram_params->mrs_set.mrs_1, 1);

src/soc/mediatek/mt8173/dramc_pi_calibration_api.c

@@ -971,9 +971,9 @@ void perbit_window_cal(u32 channel, u8 type)
 		dqdqs_perbit_dly[i].best_last_dqsdly_pass = -2;
 	}
 
-	/* 1. delay DQ,find the pass widnow (left boundary)
+	/* 1. delay DQ,find the pass window (left boundary)
 	 * 2. delay DQS find the pass window (right boundary)
-	 * 3. find the best DQ / DQS to satify the middle value
+	 * 3. find the best DQ / DQS to satisfy the middle value
 	 *    of the overall pass window per bit
 	 * 4. set DQS delay to the max per byte, delay DQ to de-skew
 	 */

src/soc/mediatek/mt8173/emi.c

@@ -159,7 +159,7 @@ size_t sdram_size(void)
 	/* add bank address bit, LPDDR3 is 8 banks =2^3 */
 	bit_counter += 3;
 
-	/*transfor bits to bytes */
+	/* transform bits to bytes */
 	return ((size_t)1 << (bit_counter - 3));
 }
 

src/soc/mediatek/mt8173/include/soc/pmic_wrap.h

@@ -125,7 +125,7 @@ struct mt8173_pwrap_regs {
 
 check_member(mt8173_pwrap_regs, dcm_dbc_prd, 0x148);
 
-/* dewrapper regsister */
+/* dewrapper register */
 enum {
 	DEW_EVENT_OUT_EN   = DEW_BASE + 0x0,
 	DEW_DIO_EN         = DEW_BASE + 0x2,

src/soc/mediatek/mt8173/mt6391.c

@@ -201,7 +201,7 @@ static void mt6391_init_setting(void)
 	pwrap_write_field(PMIC_RG_VSRMCA15_CON8, 0x17, 0x7F, 0);
 	/* [6:0]: VSRMCA15_VOSEL_SLEEP; Sleep mode setting on */
 	pwrap_write_field(PMIC_RG_VSRMCA15_CON11, 0x00, 0x7F, 0);
-	/* [8:8]: VSRMCA15_VSLEEP_EN; set sleep mode referenc */
+	/* [8:8]: VSRMCA15_VSLEEP_EN; set sleep mode reference */
 	pwrap_write_field(PMIC_RG_VSRMCA15_CON18, 0x1, 0x1, 8);
 	/* [5:4]: VSRMCA15_VOSEL_TRANS_EN; rising & falling e */
 	pwrap_write_field(PMIC_RG_VSRMCA15_CON18, 0x3, 0x3, 4);
@@ -359,7 +359,7 @@ static void mt6391_init_setting(void)
 	pwrap_write_field(PMIC_RG_VDRM_CON9, 0x43, 0x7F, 0);
 	pwrap_write_field(PMIC_RG_VDRM_CON10, 0x43, 0x7F, 0);
 
-	/* 26M clock amplitute adjust */
+	/* 26M clock amplitude adjust */
 	pwrap_write_field(PMIC_RG_DCXO_ANALOG_CON1, 0x0, 0x3, 2);
 	pwrap_write_field(PMIC_RG_DCXO_ANALOG_CON1, 0x1, 0x3, 11);
 

src/soc/mediatek/mt8183/spm.c

@@ -274,7 +274,7 @@ static int spm_load_firmware(enum dyna_load_pcm_index index,
 	offset += copy_size;
 
 	/* version */
-	/* The termintating character should be contained in the spm binary */
+	/* The terminating character should be contained in the spm binary */
 	assert(spm_bin[file_size - 1] == '\0');
 	assert(offset < file_size);
 	printk(BIOS_DEBUG, "SPM: version = %s\n", spm_bin + offset);