Fix usb debug dongle support

- move enable_usbdebug() declaration to usbdebug.h
- reinitialize debug driver in ramstage, as copying the data
  structure from romstage doesn't work right now. This way of copying
  data from romstage to ramstage is really board/cpu specific, and is
  likely to break often. So don't do it.

Change-Id: I394678ded6679c1803e29eb691b926182bdcab68
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Reviewed-on: http://review.coreboot.org/355
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
Sven Schnelle 2011-10-30 09:57:35 +01:00 committed by Stefan Reinauer
parent 28f6a43755
commit 20fc631ad2
20 changed files with 34 additions and 33 deletions

View File

@ -30,6 +30,10 @@
#include <console/ne2k.h>
#endif
#if CONFIG_USBDEBUG
#include <usbdebug.h>
#endif
#ifndef __PRE_RAM__
#include <string.h>
#include <pc80/mc146818rtc.h>

View File

@ -50,15 +50,7 @@ unsigned get_ehci_debug(void)
static void dbgp_init(void)
{
struct ehci_debug_info *dbg_infox;
/* At this point, all we have to do is copy the fixed address
* debug_info data structure to our version defined above. */
dbg_infox = (struct ehci_debug_info *)
((CONFIG_RAMTOP) - sizeof(struct ehci_debug_info));
memcpy(&dbg_info, dbg_infox, sizeof(struct ehci_debug_info));
usbdebug_init(CONFIG_EHCI_BAR, CONFIG_EHCI_DEBUG_OFFSET, &dbg_info);
}
static void dbgp_tx_byte(unsigned char data)

View File

@ -25,6 +25,7 @@
#define EHCI_BAR_INDEX 0x10
#ifndef __ROMCC__
/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
/* Section 2.2 Host Controller Capability Registers */
@ -199,5 +200,5 @@ struct ehci_dbg_port {
u32 address;
#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep))
} __attribute__ ((packed));
#endif
#endif

View File

@ -32,6 +32,8 @@ struct ehci_debug_info {
u32 endpoint_in;
};
#ifndef __ROMCC__
void enable_usbdebug(unsigned int port);
int dbgp_bulk_write_x(struct ehci_debug_info *dbg_info, const char *bytes, int size);
int dbgp_bulk_read_x(struct ehci_debug_info *dbg_info, void *data, int size);
void set_ehci_base(unsigned ehci_base);
@ -40,5 +42,6 @@ unsigned get_ehci_debug(void);
void set_debug_port(unsigned port);
int early_usbdebug_init(void);
void usbdebug_tx_byte(unsigned char data);
int usbdebug_init(unsigned ehci_bar, unsigned offset, struct ehci_debug_info *info);
#endif
#endif

View File

@ -40,5 +40,6 @@ driver-$(CONFIG_CONSOLE_NE2K) += ne2k.c
smm-y += memcpy.c cbfs.c memset.c memcmp.c
smm-$(CONFIG_CONSOLE_SERIAL8250) += uart8250.c
smm-$(CONFIG_CONSOLE_SERIAL8250MEM) += uart8250mem.c
smm-$(CONFIG_USBDEBUG) += usbdebug.c
$(obj)/lib/version.ramstage.o : $(obj)/build.h

View File

@ -238,7 +238,6 @@ int dbgp_bulk_read_x(struct ehci_debug_info *dbg_info, void *data, int size)
dbg_info->endpoint_in, data, size);
}
#ifdef __PRE_RAM__
static void dbgp_mdelay(int ms)
{
int i;
@ -356,7 +355,7 @@ static int ehci_wait_for_port(struct ehci_regs *ehci_regs, int port)
}
static int usbdebug_init(unsigned ehci_bar, unsigned offset, struct ehci_debug_info *info)
int usbdebug_init(unsigned ehci_bar, unsigned offset, struct ehci_debug_info *info)
{
struct ehci_caps *ehci_caps;
struct ehci_regs *ehci_regs;
@ -566,8 +565,6 @@ next_debug_port:
return -10;
}
// **** This part is probably x86 specific and used by romstage.c **** //
int early_usbdebug_init(void)
{
struct ehci_debug_info *dbg_info = (struct ehci_debug_info *)
@ -588,4 +585,3 @@ void usbdebug_tx_byte(unsigned char data)
dbgp_bulk_write_x(dbg_info, (char*)&data, 1);
}
}
#endif

View File

@ -8,4 +8,6 @@ driver-y += hda.c
driver-y += ac97.c
driver-y += pci.c
ramstage-y += reset.c
romstage-y += enable_usbdebug.c
romstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
smm-$(CONFIG_USBDEBUG) += enable_usbdebug.c

View File

@ -40,5 +40,4 @@ void sb600_enable(device_t dev);
void sb600_lpc_port80(void);
void sb600_pci_port80(void);
void enable_usbdebug(unsigned int port);
#endif /* SB600_H */

View File

@ -10,7 +10,9 @@ driver-y += pci.c
ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c
romstage-y += reset.c
ramstage-y += reset.c
romstage-y += enable_usbdebug.c
romstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
smm-$(CONFIG_USBDEBUG) += enable_usbdebug.c
romstage-y += early_setup.c
romstage-y += smbus.c

View File

@ -82,8 +82,6 @@ int acpi_is_wakeup_early(void);
int s3_save_nvram_early(u32 dword, int size, int nvram_pos);
int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
void enable_usbdebug(unsigned int port);
u32 __attribute__ ((weak)) get_sbdn(u32 bus);
void __attribute__((weak)) enable_fid_change_on_sb(u32 sbbusn, u32 sbdn);
#endif /* SB700_H */

View File

@ -9,4 +9,6 @@ driver-y += pci.c
driver-y += pcie.c
ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c
ramstage-y += reset.c
romstage-y += enable_usbdebug.c
romstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
smm-$(CONFIG_USBDEBUG) += enable_usbdebug.c

View File

@ -58,7 +58,6 @@ void sb800_clk_output_48Mhz(void);
int s3_save_nvram_early(u32 dword, int size, int nvram_pos);
int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
void enable_usbdebug(unsigned int port);
#else
void sb800_enable(device_t dev);
void __attribute__((weak)) sb800_setup_sata_phys(struct device *dev);

View File

@ -38,4 +38,6 @@ smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c
romstage-y += early_smbus.c
romstage-$(CONFIG_USBDEBUG) += usb_debug.c
ramstage-$(CONFIG_USBDEBUG) += usb_debug.c
smm-$(CONFIG_USBDEBUG) += usb_debug.c

View File

@ -46,7 +46,6 @@ extern void i82801gx_enable(device_t dev);
void enable_smbus(void);
int smbus_read_byte(unsigned device, unsigned address);
#endif
void enable_usbdebug(unsigned int port);
#endif
#define MAINBOARD_POWER_OFF 0

View File

@ -15,7 +15,9 @@ ramstage-y += reset.c
ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c
romstage-y += enable_usbdebug.c
romstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
smm-$(CONFIG_USBDEBUG) += enable_usbdebug.c
romstage-y += early_smbus.c
chipset_bootblock_inc += $(src)/southbridge/nvidia/ck804/romstrap.inc

View File

@ -24,7 +24,6 @@
#include "chip.h"
void ck804_enable(device_t dev);
void enable_usbdebug(unsigned int port);
extern struct pci_operations ck804_pci_ops;

View File

@ -15,7 +15,9 @@ driver-$(CONFIG_GENERATE_ACPI_TABLES) += fadt.c
ramstage-y += reset.c
romstage-y += enable_usbdebug.c
romstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
smm-$(CONFIG_USBDEBUG) += enable_usbdebug.c
chipset_bootblock_inc += $(src)/southbridge/nvidia/mcp55/romstrap.inc
chipset_bootblock_lds += $(src)/southbridge/nvidia/mcp55/romstrap.lds

View File

@ -35,7 +35,6 @@ extern struct pci_operations mcp55_pci_ops;
#else
#if !defined(__ROMCC__)
void enable_fid_change_on_sb(unsigned sbbusn, unsigned sbdn);
void enable_usbdebug(unsigned int port);
#endif
#endif

View File

@ -9,7 +9,10 @@ driver-y += sata.c
driver-y += pcie.c
driver-y += aza.c
ramstage-y += reset.c
romstage-y += enable_usbdebug.c
romstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
smm-$(CONFIG_USBDEBUG) += enable_usbdebug.c
chipset_bootblock_inc += $(src)/southbridge/sis/sis966/romstrap.inc
chipset_bootblock_lds += $(src)/southbridge/sis/sis966/romstrap.lds

View File

@ -39,8 +39,4 @@
void sis966_enable(device_t dev);
#endif
#if defined(__PRE_RAM__) && !defined(__ROMCC__)
void enable_usbdebug(unsigned int port);
#endif
#endif /* SIS966_H */