diff --git a/src/mainboard/google/hatch/variants/kindred/gpio.c b/src/mainboard/google/hatch/variants/kindred/gpio.c
index 43948a35f8..f6aeb690c5 100644
--- a/src/mainboard/google/hatch/variants/kindred/gpio.c
+++ b/src/mainboard/google/hatch/variants/kindred/gpio.c
@@ -23,6 +23,30 @@ static const struct pad_config gpio_table[] = {
 	PAD_CFG_GPI(GPP_F3, NONE, PLTRST),
 	/* F10 : MEM_STRAP_2 */
 	PAD_CFG_GPI(GPP_F10, NONE, PLTRST),
+	/* F11 : EMMC_CMD ==> EMMC_CMD */
+	PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1),
+	/* F12 : EMMC_DATA0 ==> EMMC_DAT0 */
+	PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
+	/* F13 : EMMC_DATA1 ==> EMMC_DAT1 */
+	PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
+	/* F14 : EMMC_DATA2 ==> EMMC_DAT2 */
+	PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
+	/* F15 : EMMC_DATA3 ==> EMMC_DAT3 */
+	PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
+	/* F16 : EMMC_DATA4 ==> EMMC_DAT4 */
+	PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
+	/* F17 : EMMC_DATA5 ==> EMMC_DAT5 */
+	PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1),
+	/* F18 : EMMC_DATA6 ==> EMMC_DAT6 */
+	PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1),
+	/* F19 : EMMC_DATA7 ==> EMMC_DAT7 */
+	PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
+	/* F20 : EMMC_RCLK ==> EMMC_RCLK */
+	PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
+	/* F21 : EMMC_CLK ==> EMMC_CLK */
+	PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
+	/* F22 : EMMC_RESET# ==> EMMC_RST_L */
+	PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
 	/* H19 : MEM_STRAP_0 */
 	PAD_CFG_GPI(GPP_H19, NONE, PLTRST),
 	/* H22 : MEM_STRAP_1 */
diff --git a/src/mainboard/google/hatch/variants/kindred/overridetree.cb b/src/mainboard/google/hatch/variants/kindred/overridetree.cb
index 562bb8b229..cc068bb696 100644
--- a/src/mainboard/google/hatch/variants/kindred/overridetree.cb
+++ b/src/mainboard/google/hatch/variants/kindred/overridetree.cb
@@ -47,6 +47,9 @@ chip soc/intel/cannonlake
 	# GPIO for SD card detect
 	register "sdcard_cd_gpio" = "vSD3_CD_B"
 
+	# Enable eMMC HS400
+	register "ScsEmmcHs400Enabled" = "1"
+
 	device domain 0 on
 		device pci 15.0 on
 			chip drivers/i2c/generic
@@ -143,6 +146,7 @@ chip soc/intel/cannonlake
 				device i2c 1a on end
 			end
 		end #I2C #4
+		device pci 1a.0 on  end # eMMC
 		device pci 1e.3 on
 			chip drivers/spi/acpi
 				register "name" = ""CRFP""