GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/volteer/variant/lindar: Correct SD card reader power sequence 

According to the spec provided by Bayhub, the 3.3V power rail must be enabled at least 100ms before reset is released.
To ensure this, set the power enable signal in the bootblock GPIO table.

BUG=b:173676531
BRANCH=firmware-volteer-13521.B
TEST=Built and booted into OS, test USB function normally.

Change-Id: I0c536f36c138ace93766f3024f6ec5d47b38269f
Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47799
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Kevin Chang 2020-11-20 17:18:48 +08:00 committed by Patrick Georgi
parent bb3b314807
commit 22b42a87de
1 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
src/mainboard/google/volteer/variants/lindar/gpio.c
View File

@ -134,6 +134,9 @@ static const struct pad_config early_gpio_table[] = {
/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
PAD_CFG_GPO(GPP_D16, 1, DEEP),
/* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */
PAD_CFG_GPO(GPP_H11, 1, DEEP),
};