enable apic ext id

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1839 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Yinghai Lu 2005-01-05 20:29:05 +00:00
parent a734f53721
commit 23202a9870
4 changed files with 46 additions and 14 deletions

View File

@ -150,6 +150,13 @@ static inline int spd_read_byte(unsigned device, unsigned address)
//#include "northbridge/amd/amdk8/setup_resource_map.c"
#include "northbridge/amd/amdk8/raminit.c"
#if 1
#define ENABLE_APIC_EXT_ID 1
#define APIC_ID_OFFSET 0x10
#else
#define ENABLE_APIC_EXT_ID 0
#endif
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
@ -228,23 +235,22 @@ static void main(unsigned long bist)
};
int i;
int needs_reset;
unsigned nodeid;
if (bist == 0) {
/* Skip this if there was a built in self test failure */
amd_early_mtrr_init();
enable_lapic();
init_timer();
if (cpu_init_detected()) {
#if 1
nodeid = lapicid() & 0xf;
#if ENABLE_APIC_EXT_ID == 1
enable_apic_ext_id(nodeid);
lapic_write(LAPIC_ID, ( lapic_read(LAPIC_ID) | (APIC_ID_OFFSET<<24) ) ); // CPU apicid is from 0x10
#endif
if (cpu_init_detected(nodeid)) {
asm volatile ("jmp __cpu_reset");
#else
/* cpu reset also reset the memtroller ????
need soft_reset to reset all except keep HT link freq and width */
distinguish_cpu_resets();
soft2_reset();
#endif
}
distinguish_cpu_resets();
distinguish_cpu_resets(nodeid);
if (!boot_cpu()) {
stop_this_cpu();
}
@ -259,7 +265,12 @@ static void main(unsigned long bist)
setup_s4882_resource_map();
needs_reset = setup_coherent_ht_domain();
#if 0
needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xa0);
#else
// automatically set that for you, but you might meet tight space
needs_reset |= ht_setup_chains_x();
#endif
if (needs_reset) {
print_info("ht reset -\r\n");
soft_reset();

View File

@ -133,6 +133,23 @@ static void disable_probes(void)
}
#ifndef ENABLE_APIC_EXT_ID
#define ENABLE_APIC_EXT_ID 0
#endif
static void enable_apic_ext_id(u8 node)
{
#if ENABLE_APIC_EXT_ID==1
#warning "FIXME Is the right place to enable apic ext id here?"
u32 val;
val = pci_read_config32(NODE_HT(node), 0x68);
val |= HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST ;
pci_write_config32(NODE_HT(node), 0x68, val);
#endif
}
static void enable_routing(u8 node)
{
u32 val;

View File

@ -715,6 +715,7 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
{
struct bus *cpu_bus;
int i;
int apic_id_offset = lapicid(); // bsp apicid
/* Find which cpus are present */
cpu_bus = &dev->link[0];
@ -749,6 +750,9 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
/* Report what I have done */
if (cpu) {
if(cpu->path.u.apic.apic_id<apic_id_offset) {
cpu->path.u.apic.apic_id += apic_id_offset;
}
printk_debug("CPU: %s %s\n", dev_path(cpu),
cpu->enabled?"enabled":"disabled");
}

View File

@ -7,12 +7,12 @@
#define HTIC_BIOSR_Detect (1<<5)
#define HTIC_INIT_Detect (1<<6)
static int cpu_init_detected(void)
static int cpu_init_detected(unsigned nodeid)
{
unsigned long htic;
device_t dev;
dev = PCI_DEV(0, 0x18 + lapicid(), 0);
dev = PCI_DEV(0, 0x18 + nodeid, 0);
htic = pci_read_config32(dev, HT_INIT_CONTROL);
return !!(htic & HTIC_INIT_Detect);
@ -34,11 +34,11 @@ static int cold_reset_detected(void)
return !(htic & HTIC_ColdR_Detect);
}
static void distinguish_cpu_resets(void)
static void distinguish_cpu_resets(unsigned nodeid)
{
uint32_t htic;
device_t device;
device = PCI_DEV(0, 0x18 + lapicid(), 0);
device = PCI_DEV(0, 0x18 + nodeid, 0);
htic = pci_read_config32(device, HT_INIT_CONTROL);
htic |= HTIC_ColdR_Detect | HTIC_BIOSR_Detect | HTIC_INIT_Detect;
pci_write_config32(device, HT_INIT_CONTROL, htic);