binarypi mainboards: Clean up IS_ENABLED fan control
Remove all checks for #if IS_ENABLED(CONFIG_HUDSON_IMC_FWM) around the imc.h includes. Convert from #if to if() for all fan control setup code. Where necessary, make functions non-static to match the prototypes in imc.h. Change-Id: If88af42d00227285931829441909a982fc292b2b Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This commit is contained in:
parent
6dd620bf10
commit
23e5ba9a73
|
@ -23,9 +23,7 @@
|
|||
#include "heapManager.h"
|
||||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
#include "northbridge/amd/pi/dimmSpd.h"
|
||||
|
@ -74,9 +72,8 @@ AGESA_STATUS Fch_Oem_config(UINT32 Func, UINTN FchData, VOID *ConfigPtr)
|
|||
} else if (StdHeader->Func == AMD_INIT_ENV) {
|
||||
FCH_DATA_BLOCK *FchParams_env = (FCH_DATA_BLOCK *)FchData;
|
||||
printk(BIOS_DEBUG, "Fch OEM config in INIT ENV ");
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
oem_fan_control(FchParams_env);
|
||||
#endif
|
||||
if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM))
|
||||
oem_fan_control(FchParams_env);
|
||||
|
||||
/* XHCI configuration */
|
||||
if (IS_ENABLED(CONFIG_HUDSON_XHCI_ENABLE))
|
||||
|
|
|
@ -22,9 +22,7 @@
|
|||
#include "heapManager.h"
|
||||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
|
||||
|
@ -125,7 +123,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
|
|||
* software switches the I2C address. AMD recommends using IMC
|
||||
* to control fans, instead of HWM.
|
||||
*/
|
||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
{
|
||||
FCH_HWM_FAN_CTR oem_factl[5] = {
|
||||
/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
|
||||
|
@ -140,128 +138,126 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
|||
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof (FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
|
||||
|
||||
/* Enable IMC fan control. the recommended way */
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00; /* 6 | BIT3 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
|
||||
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x00; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x00; /* 6 | BIT3 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0;
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
|
||||
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0x00; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; /*BIT0 | BIT4 |BIT8; */
|
||||
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; /*BIT0 | BIT4 |BIT8; */
|
||||
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
|
||||
#else /* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
|
||||
#endif /* CONFIG_HUDSON_IMC_FWM */
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
} else {
|
||||
/* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
|
@ -20,9 +20,7 @@
|
|||
#include "heapManager.h"
|
||||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
#include <device/azalia.h>
|
||||
|
@ -140,7 +138,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
|
|||
* software switches the I2C address. AMD recommends using IMC
|
||||
* to control fans, instead of HWM.
|
||||
*/
|
||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
{
|
||||
FCH_HWM_FAN_CTR oem_factl[5] = {
|
||||
/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
|
||||
|
@ -155,130 +153,128 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
|||
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
|
||||
|
||||
/* Enable IMC fan control. the recommended way */
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
|
||||
imc_reg_init();
|
||||
|
||||
imc_reg_init();
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e; /* 6 | BIT3 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x0e; /* 6 | BIT3 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x54;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x02;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /* AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /* AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /* AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /* AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /* AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /* AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /* AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /* AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /* critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; /* BIT0 | BIT2 | BIT5 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;/* BIT0 | BIT4 |BIT8 */
|
||||
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333;/* BIT0 | BIT4 |BIT8 */
|
||||
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
|
||||
#else /* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
|
||||
|
||||
#endif /* CONFIG_HUDSON_IMC_FWM */
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
} else {
|
||||
/* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
|
@ -20,9 +20,7 @@
|
|||
#include "heapManager.h"
|
||||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
|
||||
|
@ -108,7 +106,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
|
|||
* software switches the I2C address. AMD recommends using IMC
|
||||
* to control fans, instead of HWM.
|
||||
*/
|
||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
{
|
||||
FCH_HWM_FAN_CTR oem_factl[5] = {
|
||||
/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
|
||||
|
@ -123,128 +121,126 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
|||
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
|
||||
|
||||
/* Enable IMC fan control. the recommended way */
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
|
||||
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
|
||||
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
|
||||
#else /* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
|
||||
#endif /* CONFIG_HUDSON_IMC_FWM */
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
} else {
|
||||
/* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
|
@ -20,9 +20,7 @@
|
|||
#include "heapManager.h"
|
||||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
#include <spd_bin.h>
|
||||
|
@ -110,7 +108,7 @@ static const CODEC_TBL_LIST CodecTableList[] =
|
|||
* software switches the I2C address. AMD recommends using IMC
|
||||
* to control fans, instead of HWM.
|
||||
*/
|
||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
{
|
||||
FCH_HWM_FAN_CTR oem_factl[5] = {
|
||||
/*temperature input, fan mode, frequency, low_duty, med_duty, multiplier, lowtemp, medtemp, hightemp, LinearRange, LinearHoldCount */
|
||||
|
@ -125,128 +123,126 @@ static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
|||
LibAmdMemCopy ((VOID *)(FchParams->Hwm.HwmFanControl), &oem_factl, (sizeof(FCH_HWM_FAN_CTR) * 5), FchParams->StdHeader);
|
||||
|
||||
/* Enable IMC fan control. the recommended way */
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
if (IS_ENABLED(CONFIG_HUDSON_IMC_FWM)) {
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
|
||||
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE; /* 0 disable, 1 enable TSI Auto Polling */
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
|
||||
FchParams->Imc.ImcEnable = TRUE;
|
||||
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
|
||||
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC , 1 enable IMC, 0 following hw strap setting */
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
|
||||
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
|
||||
/* Thermal Zone Parameter */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e; //6 | BIT3;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
|
||||
/* IMC Fan Policy temperature thresholds */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 0x46; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 0x3c; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 0x32; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
|
||||
/* IMC Fan Policy PWM Settings */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 0x5a; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 0x46; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 0x28; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg1 = 0x01; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg2 = 0x55; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg3 = 0x17;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg6 = 0x90; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone1MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg1 = 0x01; /* zone */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg2 = 60; /*AC0 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg3 = 40; /*AC1 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg4 = 0; /*AC2 threshold in Celsius */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg5 = 0; /*AC3 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg6 = 0; /*AC4 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg7 = 0; /*AC5 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg8 = 0; /*AC6 threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgReg9 = 0; /*AC7 lowest threshold in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegA = 0; /*critical threshold* in Celsius, 0xFF is not define */
|
||||
FchParams->Imc.EcStruct.MsgFun83Zone1MsgRegB = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg1 = 0x01; /*Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg2 = 0; /* AL0 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg3 = 0; /* AL1 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg4 = 0; /* AL2 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg5 = 0x00; /* AL3 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg6 = 0x00; /* AL4 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg7 = 0x00; /* AL5 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg8 = 0x00; /* AL6 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun85Zone1MsgReg9 = 0x00; /* AL7 percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg1 = 0x2; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg6 = 0x98; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg7 = 2;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg8 = 5; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone2MsgReg9 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg0 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg1 = 0x3; /* Zone */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg2 = 0x0; //BIT0 | BIT2 | BIT5;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg3 = 0x0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg4 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg5 = 0x00;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg6 = 0x0; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg7 = 0;
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg8 = 0; /* PWM steping rate in unit of PWM level percentage */
|
||||
FchParams->Imc.EcStruct.MsgFun81Zone3MsgReg9 = 0;
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
|
||||
|
||||
/* IMC Function */
|
||||
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x333; //BIT0 | BIT4 |BIT8;
|
||||
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
|
||||
#else /* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
|
||||
#endif /* CONFIG_HUDSON_IMC_FWM */
|
||||
/* NOTE:
|
||||
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
|
||||
* AGESA put EcDefaultMessage as global data in ROM, so we can't override it.
|
||||
* so we remove it from AGESA code. Please See FchInitLateHwm.
|
||||
*/
|
||||
} else {
|
||||
/* HWM fan control, using the alternative method */
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = TRUE;
|
||||
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE; /* 1 enable, 0 disable TSI Auto Polling */
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
|
@ -23,9 +23,7 @@
|
|||
#include "FchPlatform.h"
|
||||
#include "cbfs.h"
|
||||
#include "gpio_ftns.h"
|
||||
#if IS_ENABLED(CONFIG_HUDSON_IMC_FWM)
|
||||
#include "imc.h"
|
||||
#endif
|
||||
#include "hudson.h"
|
||||
#include <stdlib.h>
|
||||
|
||||
|
@ -55,7 +53,7 @@ const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
|
|||
* software switches the I2C address. AMD recommends using IMC
|
||||
* to control fans, instead of HWM.
|
||||
*/
|
||||
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
void oem_fan_control(FCH_DATA_BLOCK *FchParams)
|
||||
{
|
||||
FchParams->Imc.ImcEnable = FALSE;
|
||||
FchParams->Hwm.HwMonitorEnable = FALSE;
|
||||
|
|
Loading…
Reference in New Issue