mb/google/nissa/var/quandiso: Add P-sensor support
- GPIO changes: GPP_B5 ==> I2C_P_SENSOR_SDA GPP_B6 ==> I2C_P_SENSOR_SCL GPP_H19 ==> P_SENSOR_INT_L - I2C SX9324 support - Disable GPIOs when sub board LTE not used BUG=b:296506936 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I5ed82b125b6c594225efca418017ef42f4f63b9d Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
This commit is contained in:
Robert Chen
Felix Held
parent
4a0b599ad6
commit
242bed2ec5
|
|
@ -294,6 +294,8 @@ config BOARD_GOOGLE_QUANDISO
|
|||
select CHROMEOS_WIFI_SAR if CHROMEOS
|
||||
select DRIVERS_GENESYSLOGIC_GL9750
|
||||
select DRIVERS_GENERIC_GPIO_KEYS
|
||||
select DRIVERS_I2C_SX9324
|
||||
select DRIVERS_I2C_SX9324_SUPPORT_LEGACY_LINUX_DRIVER
|
||||
select HAVE_WWAN_POWER_SEQUENCE
|
||||
|
||||
config BOARD_GOOGLE_REDRIX
|
||||
|
|
|
|||
|
|
@ -9,10 +9,16 @@
|
|||
static const struct pad_config lte_disable_pads[] = {
|
||||
/* A8 : WWAN_RF_DISABLE_ODL */
|
||||
PAD_NC(GPP_A8, NONE),
|
||||
/* B5 : I2C_P_SENSOR_SDA */
|
||||
PAD_NC(GPP_B5, NONE),
|
||||
/* B6 : I2C_P_SENSOR_SCL */
|
||||
PAD_NC(GPP_B6, NONE),
|
||||
/* D6 : WWAN_EN */
|
||||
PAD_NC(GPP_D6, NONE),
|
||||
/* F12 : WWAN_RST_L */
|
||||
PAD_NC(GPP_F12, NONE),
|
||||
/* H19 : P_SENSOR_INT_L */
|
||||
PAD_NC(GPP_H19, NONE),
|
||||
/* H23 : WWAN_SAR_DETECT_ODL */
|
||||
PAD_NC(GPP_H23, NONE),
|
||||
};
|
||||
|
|
|
|||
|
|
@ -16,6 +16,11 @@ static const struct pad_config override_gpio_table[] = {
|
|||
/* A22 : GPP_A22 ==> USB_C1_AUX_DC_N */
|
||||
PAD_CFG_GPO(GPP_A22, 1, DEEP),
|
||||
|
||||
/* B5 : I2C2_SDA ==> I2C_P_SENSOR_SDA */
|
||||
PAD_CFG_NF(GPP_B5, NONE, DEEP, NF2),
|
||||
/* B6 : I2C2_SCL ==> I2C_P_SENSOR_SCL */
|
||||
PAD_CFG_NF(GPP_B6, NONE, DEEP, NF2),
|
||||
|
||||
/* D3 : WCAM_RST_L ==> NC */
|
||||
PAD_NC_LOCK(GPP_D3, NONE, LOCK_CONFIG),
|
||||
/* D6 : WWAN_EN */
|
||||
|
|
@ -42,8 +47,8 @@ static const struct pad_config override_gpio_table[] = {
|
|||
PAD_CFG_NF(GPP_H15, NONE, DEEP, NF1),
|
||||
/* H17 : HDMI_SRC_SDA */
|
||||
PAD_CFG_NF(GPP_H17, NONE, DEEP, NF1),
|
||||
/* H19 : SRCCLKREQ4# ==> NC */
|
||||
PAD_NC(GPP_H19, NONE),
|
||||
/* H19 : SRCCLKREQ4# ==> P_SENSOR_INT_L */
|
||||
PAD_CFG_GPI_APIC(GPP_H19, NONE, PLTRST, LEVEL, NONE),
|
||||
/* H23 : WWAN_SAR_DETECT_ODL */
|
||||
PAD_CFG_GPO(GPP_H23, 1, DEEP),
|
||||
};
|
||||
|
|
|
|||
|
|
@ -106,7 +106,7 @@ chip soc/intel/alderlake
|
|||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| I2C1 | Touchscreen |
|
||||
#| I2C2 | WCAM |
|
||||
#| I2C2 | P-sensor |
|
||||
#| I2C3 | Audio |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
|
|
@ -280,6 +280,58 @@ chip soc/intel/alderlake
|
|||
end
|
||||
end
|
||||
end
|
||||
device ref i2c2 on
|
||||
chip drivers/i2c/sx9324
|
||||
register "desc" = ""SAR Proximity Sensor""
|
||||
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_H19_IRQ)"
|
||||
register "speed" = "I2C_SPEED_FAST"
|
||||
register "uid" = "1"
|
||||
register "reg_gnrl_ctrl0" = "0x16"
|
||||
register "reg_gnrl_ctrl1" = "0x21"
|
||||
register "reg_afe_ctrl0" = "0x00"
|
||||
register "reg_afe_ctrl1" = "0x10"
|
||||
register "reg_afe_ctrl2" = "0x00"
|
||||
register "reg_afe_ctrl3" = "0x00"
|
||||
register "reg_afe_ctrl4" = "0x07"
|
||||
register "reg_afe_ctrl5" = "0x00"
|
||||
register "reg_afe_ctrl6" = "0x00"
|
||||
register "reg_afe_ctrl7" = "0x07"
|
||||
register "reg_afe_ctrl8" = "0x12"
|
||||
register "reg_afe_ctrl9" = "0x0f"
|
||||
register "reg_prox_ctrl0" = "0x12"
|
||||
register "reg_prox_ctrl1" = "0x12"
|
||||
register "reg_prox_ctrl2" = "0x90"
|
||||
register "reg_prox_ctrl3" = "0x60"
|
||||
register "reg_prox_ctrl4" = "0x0c"
|
||||
register "reg_prox_ctrl5" = "0x12"
|
||||
register "reg_prox_ctrl6" = "0x3c"
|
||||
register "reg_prox_ctrl7" = "0x58"
|
||||
register "reg_adv_ctrl0" = "0x00"
|
||||
register "reg_adv_ctrl1" = "0x00"
|
||||
register "reg_adv_ctrl2" = "0x00"
|
||||
register "reg_adv_ctrl3" = "0x00"
|
||||
register "reg_adv_ctrl4" = "0x00"
|
||||
register "reg_adv_ctrl5" = "0x05"
|
||||
register "reg_adv_ctrl6" = "0x00"
|
||||
register "reg_adv_ctrl7" = "0x00"
|
||||
register "reg_adv_ctrl8" = "0x00"
|
||||
register "reg_adv_ctrl9" = "0x00"
|
||||
register "reg_adv_ctrl10" = "0x5c"
|
||||
register "reg_adv_ctrl11" = "0x52"
|
||||
register "reg_adv_ctrl12" = "0xb5"
|
||||
register "reg_adv_ctrl13" = "0x00"
|
||||
register "reg_adv_ctrl14" = "0x80"
|
||||
register "reg_adv_ctrl15" = "0x0c"
|
||||
register "reg_adv_ctrl16" = "0x38"
|
||||
register "reg_adv_ctrl17" = "0x56"
|
||||
register "reg_adv_ctrl18" = "0x33"
|
||||
register "reg_adv_ctrl19" = "0xf0"
|
||||
register "reg_adv_ctrl20" = "0xf0"
|
||||
device i2c 28 on
|
||||
probe DB_USB DB_1C_LTE
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref i2c3 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""RTL5682""
|
||||
|
|
|
|||
Loading…
Reference in New Issue