mb/samsung: Clean up LPC and IOAPIC configuration

Don't overwrite the LPC decode config of the generic PCH code, move
UART init into bootblock_mainboard_early_init() and don't enable the
IOAPIC, which is already done by generic code.

Change-Id: I90d090f5bff29174e68981fea3c3f04c666b1d28
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36895
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit is contained in:
Nico Huber 2019-11-17 01:24:44 +01:00 committed by Patrick Georgi
parent cc32a69807
commit 25128a7997
2 changed files with 7 additions and 42 deletions

View File

@ -17,6 +17,7 @@
#include <stdint.h>
#include <string.h>
#include <arch/io.h>
#include <bootblock_common.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <cpu/x86/lapic.h>
@ -33,22 +34,10 @@
#include <superio/smsc/lpc47n207/lpc47n207.h>
#endif
void mainboard_pch_lpc_setup(void)
void bootblock_mainboard_early_init(void)
{
/* Set COM1/COM2 decode range */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
#if CONFIG(DRIVERS_UART_8250IO)
/* Enable SuperIO + EC + KBC + COM1 + lpc47n207 config*/
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
KBC_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN);
try_enabling_LPC47N207_uart();
#else
/* Enable SuperIO + EC + KBC */
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
KBC_LPC_EN);
#endif
if (CONFIG(DRIVERS_UART_8250IO))
try_enabling_LPC47N207_uart();
}
void mainboard_late_rcba_config(void)
@ -88,11 +77,6 @@ void mainboard_late_rcba_config(void)
DIR_ROUTE(D26IR, PIRQB, PIRQC, PIRQD, PIRQA);
DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD);
DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD);
/* Enable IOAPIC (generic) */
RCBA16(OIC) = 0x0100;
/* PCH BWG says to read back the IOAPIC enable register */
(void) RCBA16(OIC);
}
static const uint8_t *locate_spd(void)

View File

@ -46,23 +46,6 @@
#define SERIAL_DEV PNP_DEV(0x2e, IT8772F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8772F_GPIO)
void mainboard_pch_lpc_setup(void)
{
/* Set COM1/COM2 decode range */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
#if CONFIG(DRIVERS_UART_8250IO)
/* Enable SuperIO + PS/2 Keyboard/Mouse + COM1 + lpc47n207 config*/
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN |\
CNF2_LPC_EN | COMA_LPC_EN);
try_enabling_LPC47N207_uart();
#else
/* Enable SuperIO + PS/2 Keyboard/Mouse */
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN);
#endif
}
void mainboard_late_rcba_config(void)
{
/*
@ -97,11 +80,6 @@ void mainboard_late_rcba_config(void)
DIR_ROUTE(D26IR, PIRQE, PIRQF, PIRQG, PIRQH);
DIR_ROUTE(D25IR, PIRQA, PIRQB, PIRQC, PIRQD);
DIR_ROUTE(D22IR, PIRQA, PIRQB, PIRQC, PIRQD);
/* Enable IOAPIC (generic) */
RCBA16(OIC) = 0x0100;
/* PCH BWG says to read back the IOAPIC enable register */
(void) RCBA16(OIC);
}
static void setup_sio_gpios(void)
@ -242,6 +220,9 @@ int mainboard_should_reset_usb(int s3resume)
void bootblock_mainboard_early_init(void)
{
if (CONFIG(DRIVERS_UART_8250IO))
try_enabling_LPC47N207_uart();
setup_sio_gpios();
/* Early SuperIO setup */