diff --git a/src/mainboard/google/veyron_brain/Kconfig b/src/mainboard/google/veyron_brain/Kconfig index 1ec1d56ad4..b4d1a0773a 100644 --- a/src/mainboard/google/veyron_brain/Kconfig +++ b/src/mainboard/google/veyron_brain/Kconfig @@ -24,16 +24,13 @@ config BOARD_SPECIFIC_OPTIONS # dummy select BOARD_ID_SUPPORT select BOARD_ROMSIZE_KB_4096 select COMMON_CBFS_SPI_WRAPPER - select EC_GOOGLE_CHROMEEC - select EC_GOOGLE_CHROMEEC_SPI - select EC_SOFTWARE_SYNC - select RAM_CODE_SUPPORT - select SOC_ROCKCHIP_RK3288 + select HAVE_HARD_RESET select MAINBOARD_DO_NATIVE_VGA_INIT select MAINBOARD_HAS_CHROMEOS select MAINBOARD_HAS_BOOTBLOCK_INIT - select HAVE_HARD_RESET + select RAM_CODE_SUPPORT select RETURN_FROM_VERSTAGE + select SOC_ROCKCHIP_RK3288 select SPI_FLASH select SPI_FLASH_GIGADEVICE select SPI_FLASH_WINBOND @@ -45,20 +42,12 @@ config MAINBOARD_DIR config MAINBOARD_PART_NUMBER string - default "Veyron_Jerry" + default "Veyron_Brain" config MAINBOARD_VENDOR string default "Google" -config EC_GOOGLE_CHROMEEC_SPI_BUS - hex - default 0 - -config EC_GOOGLE_CHROMEEC_SPI_WAKEUP_DELAY_US - int - default 100 - config VBOOT_RAMSTAGE_INDEX hex default 0x3 diff --git a/src/mainboard/google/veyron_brain/board.h b/src/mainboard/google/veyron_brain/board.h index 2b1643d4bd..c9583cf30c 100644 --- a/src/mainboard/google/veyron_brain/board.h +++ b/src/mainboard/google/veyron_brain/board.h @@ -17,8 +17,8 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -#ifndef __MAINBOARD_GOOGLE_VEYRON_JERRY_BOARD_H -#define __MAINBOARD_GOOGLE_VEYRON_JERRY_BOARD_H +#ifndef __MAINBOARD_GOOGLE_VEYRON_BRAIN_BOARD_H +#define __MAINBOARD_GOOGLE_VEYRON_BRAIN_BOARD_H #include #include @@ -29,4 +29,4 @@ /* TODO: move setup_chromeos_gpios() here once bootblock code is in mainboard */ -#endif /* __MAINBOARD_GOOGLE_VEYRON_JERRY_BOARD_H */ +#endif /* __MAINBOARD_GOOGLE_VEYRON_BRAIN_BOARD_H */ diff --git a/src/mainboard/google/veyron_brain/bootblock.c b/src/mainboard/google/veyron_brain/bootblock.c index 5571d456f8..af353f89fa 100644 --- a/src/mainboard/google/veyron_brain/bootblock.c +++ b/src/mainboard/google/veyron_brain/bootblock.c @@ -45,6 +45,8 @@ void bootblock_mainboard_early_init() void bootblock_mainboard_init(void) { + gpio_output(GPIO(7, A, 0), 1); /* Power LED */ + /* Up VDD_CPU (BUCK1) to 1.4V to support max CPU frequency (1.8GHz). */ setbits_le32(&rk3288_pmu->iomux_i2c0scl, IOMUX_I2C0SCL); setbits_le32(&rk3288_pmu->iomux_i2c0sda, IOMUX_I2C0SDA); @@ -71,9 +73,5 @@ void bootblock_mainboard_init(void) writel(IOMUX_SPI2_TXRX, &rk3288_grf->iomux_spi2txrx); rockchip_spi_init(CONFIG_BOOT_MEDIA_SPI_BUS, 11*MHz); - /* spi0 for chrome ec */ - writel(IOMUX_SPI0, &rk3288_grf->iomux_spi0); - rockchip_spi_init(CONFIG_EC_GOOGLE_CHROMEEC_SPI_BUS, 9*MHz); - setup_chromeos_gpios(); } diff --git a/src/mainboard/google/veyron_brain/chromeos.c b/src/mainboard/google/veyron_brain/chromeos.c index 069b28b91a..14f078c81b 100644 --- a/src/mainboard/google/veyron_brain/chromeos.c +++ b/src/mainboard/google/veyron_brain/chromeos.c @@ -1,4 +1,4 @@ -/* +/* * This file is part of the coreboot project. * * Copyright 2014 Rockchip Inc. @@ -19,8 +19,6 @@ #include #include -#include -#include #include #include #include @@ -28,15 +26,12 @@ #include "board.h" #define GPIO_WP GPIO(7, A, 6) -#define GPIO_LID GPIO(0, A, 6) #define GPIO_POWER GPIO(0, A, 5) #define GPIO_RECOVERY GPIO(0, B, 1) -#define GPIO_ECINRW GPIO(0, A, 7) void setup_chromeos_gpios(void) { gpio_input(GPIO_WP); - gpio_input_pullup(GPIO_LID); gpio_input(GPIO_POWER); gpio_input_pullup(GPIO_RECOVERY); } @@ -55,20 +50,13 @@ void fill_lb_gpios(struct lb_gpios *gpios) /* Recovery: active low */ gpios->gpios[count].port = GPIO_RECOVERY.raw; - gpios->gpios[count].polarity = ACTIVE_HIGH; - gpios->gpios[count].value = get_recovery_mode_switch(); + gpios->gpios[count].polarity = ACTIVE_LOW; + gpios->gpios[count].value = gpio_get(GPIO_RECOVERY); strncpy((char *)gpios->gpios[count].name, "recovery", GPIO_MAX_NAME_LENGTH); count++; - /* Lid: active high */ - gpios->gpios[count].port = GPIO_LID.raw; - gpios->gpios[count].polarity = ACTIVE_HIGH; - gpios->gpios[count].value = -1; - strncpy((char *)gpios->gpios[count].name, "lid", GPIO_MAX_NAME_LENGTH); - count++; - - /* Power:GPIO active high */ + /* Power Button: GPIO active low */ gpios->gpios[count].port = GPIO_POWER.raw; gpios->gpios[count].polarity = ACTIVE_LOW; gpios->gpios[count].value = -1; @@ -84,14 +72,6 @@ void fill_lb_gpios(struct lb_gpios *gpios) GPIO_MAX_NAME_LENGTH); count++; - /* EC in RW: GPIO active high */ - gpios->gpios[count].port = GPIO_ECINRW.raw; - gpios->gpios[count].polarity = ACTIVE_HIGH; - gpios->gpios[count].value = -1; - strncpy((char *)gpios->gpios[count].name, "EC in RW", - GPIO_MAX_NAME_LENGTH); - count++; - /* Reset: GPIO active high (output) */ gpios->gpios[count].port = GPIO_RESET.raw; gpios->gpios[count].polarity = ACTIVE_HIGH; @@ -113,15 +93,7 @@ int get_developer_mode_switch(void) int get_recovery_mode_switch(void) { - uint32_t ec_events; - - /* The GPIO is active low. */ - if (!gpio_get(GPIO_RECOVERY)) - return 1; - - ec_events = google_chromeec_get_events_b(); - return !!(ec_events & - EC_HOST_EVENT_MASK(EC_HOST_EVENT_KEYBOARD_RECOVERY)); + return !gpio_get(GPIO_RECOVERY); } int get_write_protect_state(void) diff --git a/src/mainboard/google/veyron_brain/devicetree.cb b/src/mainboard/google/veyron_brain/devicetree.cb index 4a2533dcd8..59a18267aa 100644 --- a/src/mainboard/google/veyron_brain/devicetree.cb +++ b/src/mainboard/google/veyron_brain/devicetree.cb @@ -22,5 +22,4 @@ chip soc/rockchip/rk3288 device cpu_cluster 0 on end register "vop_id" = "1" register "framebuffer_bits_per_pixel" = "16" - register "lcd_power_on_udelay" = "200000" end diff --git a/src/mainboard/google/veyron_brain/mainboard.c b/src/mainboard/google/veyron_brain/mainboard.c index d9952605dc..d8719c06b4 100644 --- a/src/mainboard/google/veyron_brain/mainboard.c +++ b/src/mainboard/google/veyron_brain/mainboard.c @@ -46,20 +46,6 @@ static void configure_usb(void) gpio_output(GPIO(7, C, 5), 1); /* 5V_DRV */ } -static void configure_sdmmc(void) -{ - writel(IOMUX_SDMMC0, &rk3288_grf->iomux_sdmmc0); - - /* use sdmmc0 io, disable JTAG function */ - writel(RK_CLRBITS(1 << 12), &rk3288_grf->soc_con0); - - /* Note: these power rail definitions are copied in romstage.c */ - rk808_configure_ldo(PMIC_BUS, 4, 3300); /* VCCIO_SD */ - rk808_configure_ldo(PMIC_BUS, 5, 3300); /* VCC33_SD */ - - gpio_input(GPIO(7, A, 5)); /* SD_DET */ -} - static void configure_emmc(void) { writel(IOMUX_EMMCDATA, &rk3288_grf->iomux_emmcdata); @@ -91,19 +77,9 @@ static void configure_vop(void) /* lcdc(vop) iodomain select 1.8V */ writel(RK_SETBITS(1 << 0), &rk3288_grf->io_vsel); - switch (board_id()) { - case 2: - rk808_configure_switch(PMIC_BUS, 2, 1); /* VCC18_LCD */ - rk808_configure_ldo(PMIC_BUS, 7, 2500); /* VCC10_LCD_PWREN_H */ - rk808_configure_switch(PMIC_BUS, 1, 1); /* VCC33_LCD */ - break; - default: - gpio_output(GPIO(2, B, 5), 1); /* AVDD_1V8_DISP_EN */ - rk808_configure_ldo(PMIC_BUS, 7, 2500); /* VCC10_LCD_PWREN_H */ - gpio_output(GPIO(7, B, 6), 1); /* LCD_EN */ - rk808_configure_switch(PMIC_BUS, 1, 1); /* VCC33_LCD */ - break; - } + rk808_configure_switch(PMIC_BUS, 2, 1); /* VCC18_LCD (HDMI_AVDD_1V8) */ + rk808_configure_ldo(PMIC_BUS, 7, 1000); /* VDD10_LCD (HDMI_AVDD_1V0) */ + rk808_configure_switch(PMIC_BUS, 1, 1); /* VCC33_LCD */ } static void mainboard_init(device_t dev) @@ -111,7 +87,6 @@ static void mainboard_init(device_t dev) gpio_output(GPIO_RESET, 0); configure_usb(); - configure_sdmmc(); configure_emmc(); configure_codec(); configure_vop(); @@ -137,21 +112,8 @@ void lb_board(struct lb_header *header) dma->range_size = _dma_coherent_size; } +/* called from rk3288 display.c, but there is no backlight for this platform */ void mainboard_power_on_backlight(void) { - switch (board_id()) { - case 2: - gpio_output(GPIO(7, A, 0), 0); /* BL_EN */ - gpio_output(GPIO(7, A, 2), 1); /* LCD_BL */ - mdelay(10); - gpio_output(GPIO(7, A, 0), 1); /* BL_EN */ - break; - default: - gpio_output(GPIO(2, B, 4), 1); /* BL_PWR_EN */ - mdelay(10); - gpio_output(GPIO(7, A, 2), 1); /* LCD_BL */ - mdelay(10); - gpio_output(GPIO(7, A, 0), 1); /* BL_EN */ - break; - } + return; }