mb/google/brya/var/vell: update overridetree
Init basic override devicetree based on initial schematics BUG=b:205908918 TEST=emerge-brya coreboot Change-Id: Ibaa910eb1c5584197907963781258035c668298e Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Kevin Chiu
Felix Held
parent
1ca8b6e3c3
commit
2649f5a518
|
|
@ -127,6 +127,8 @@ config BOARD_GOOGLE_ANAHERA4ES
|
||||||
config BOARD_GOOGLE_VELL
|
config BOARD_GOOGLE_VELL
|
||||||
bool "-> Vell"
|
bool "-> Vell"
|
||||||
select BOARD_GOOGLE_BASEBOARD_BRYA
|
select BOARD_GOOGLE_BASEBOARD_BRYA
|
||||||
|
select DRIVERS_GFX_GENERIC
|
||||||
|
select SOC_INTEL_ENABLE_USB4_PCIE_RESOURCES
|
||||||
|
|
||||||
config BOARD_GOOGLE_TANIKS
|
config BOARD_GOOGLE_TANIKS
|
||||||
bool "-> Taniks"
|
bool "-> Taniks"
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,339 @@
|
||||||
chip soc/intel/alderlake
|
fw_config
|
||||||
|
field DB_SD 0 1
|
||||||
device domain 0 on
|
option SD_ABSENT 0
|
||||||
|
option SD_GL9750 1
|
||||||
|
end
|
||||||
|
field KB_BL 2 2
|
||||||
|
option KB_BL_ABSENT 0
|
||||||
|
option KB_BL_PRESENT 1
|
||||||
|
end
|
||||||
|
field AUDIO 3 5
|
||||||
|
option AUDIO_UNKNOWN 0
|
||||||
|
option MAX98360_ALC5682I_I2S 1
|
||||||
|
option MAX98360_ALC5682IVS_I2S 2
|
||||||
|
end
|
||||||
|
field DB_LTE 6 7
|
||||||
|
option LTE_ABSENT 0
|
||||||
|
option LTE_USB 1
|
||||||
|
end
|
||||||
|
field EPS 10 10
|
||||||
|
option PRIVACY_SCREEN_ABSENT 0
|
||||||
|
option PRIVACY_SCREEN 1
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip soc/intel/alderlake
|
||||||
|
# This disables autonomous GPIO power management, otherwise
|
||||||
|
# old cr50 FW only supports short pulses; need to clarify
|
||||||
|
# the minimum PCH IRQ pulse width with Intel, b/180111628
|
||||||
|
register "gpio_override_pm" = "1"
|
||||||
|
register "gpio_pm[COMM_0]" = "0"
|
||||||
|
register "gpio_pm[COMM_1]" = "0"
|
||||||
|
register "gpio_pm[COMM_2]" = "0"
|
||||||
|
register "gpio_pm[COMM_3]" = "0"
|
||||||
|
register "gpio_pm[COMM_4]" = "0"
|
||||||
|
register "gpio_pm[COMM_5]" = "0"
|
||||||
|
|
||||||
|
# Intel Common SoC Config
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
#| Field | Value |
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
#| GSPI1 | Fingerprint MCU |
|
||||||
|
#| I2C0 | Audio |
|
||||||
|
#| I2C1 | Touchscreen |
|
||||||
|
#| I2C2 | |
|
||||||
|
#| I2C3 | cr50 TPM. Early init is |
|
||||||
|
#| | required to set up a BAR |
|
||||||
|
#| | for TPM communication |
|
||||||
|
#| I2C5 | Trackpad |
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
register "usb2_ports[1]" = "USB2_PORT_MID(OC_SKIP)" # Type-A MLB Port
|
||||||
|
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Smart Card
|
||||||
|
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A MLB port
|
||||||
|
device domain 0 on
|
||||||
|
device ref igpu on
|
||||||
|
chip drivers/gfx/generic
|
||||||
|
register "device_count" = "1"
|
||||||
|
register "device[0].name" = ""LCD""
|
||||||
|
# Use Chrome OS privacy screen _HID
|
||||||
|
register "device[0].hid" = ""GOOG0010""
|
||||||
|
# Internal panel on the first port of the graphics chip
|
||||||
|
register "device[0].addr" = "0x80010400"
|
||||||
|
register "device[0].privacy.enabled" = "1"
|
||||||
|
register "device[0].privacy.gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H21)"
|
||||||
|
device generic 0 on
|
||||||
|
probe EPS PRIVACY_SCREEN
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end # Integrated Graphics Device
|
||||||
|
device ref dtt on
|
||||||
|
chip drivers/intel/dptf
|
||||||
|
## sensor information
|
||||||
|
register "options.tsr[0].desc" = ""DRAM""
|
||||||
|
register "options.tsr[1].desc" = ""Soc""
|
||||||
|
register "options.tsr[2].desc" = ""Charger""
|
||||||
|
register "options.tsr[3].desc" = ""Regulator""
|
||||||
|
# TODO: below values are initial reference values only
|
||||||
|
## Passive Policy
|
||||||
|
register "policies.passive" = "{
|
||||||
|
[0] = DPTF_PASSIVE(CPU, CPU, 95, 5000),
|
||||||
|
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 75, 5000),
|
||||||
|
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 75, 5000),
|
||||||
|
[3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 75, 5000),
|
||||||
|
[4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 75, 5000),
|
||||||
|
}"
|
||||||
|
## Critical Policy
|
||||||
|
register "policies.critical" = "{
|
||||||
|
[0] = DPTF_CRITICAL(CPU, 105, SHUTDOWN),
|
||||||
|
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||||
|
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||||
|
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
|
||||||
|
[4] = DPTF_CRITICAL(TEMP_SENSOR_3, 85, SHUTDOWN),
|
||||||
|
}"
|
||||||
|
register "controls.power_limits" = "{
|
||||||
|
.pl1 = {
|
||||||
|
.min_power = 3000,
|
||||||
|
.max_power = 15000,
|
||||||
|
.time_window_min = 28 * MSECS_PER_SEC,
|
||||||
|
.time_window_max = 32 * MSECS_PER_SEC,
|
||||||
|
.granularity = 200,
|
||||||
|
},
|
||||||
|
.pl2 = {
|
||||||
|
.min_power = 55000,
|
||||||
|
.max_power = 55000,
|
||||||
|
.time_window_min = 28 * MSECS_PER_SEC,
|
||||||
|
.time_window_max = 32 * MSECS_PER_SEC,
|
||||||
|
.granularity = 1000,
|
||||||
|
}
|
||||||
|
}"
|
||||||
|
## Charger Performance Control (Control, mA)
|
||||||
|
register "controls.charger_perf" = "{
|
||||||
|
[0] = { 255, 1700 },
|
||||||
|
[1] = { 24, 1500 },
|
||||||
|
[2] = { 16, 1000 },
|
||||||
|
[3] = { 8, 500 }
|
||||||
|
}"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pcie4_0 on
|
||||||
|
# Enable CPU PCIE RP 1 using CLK 0
|
||||||
|
register "cpu_pcie_rp[CPU_RP(1)]" = "{
|
||||||
|
.clk_req = 1,
|
||||||
|
.clk_src = 3,
|
||||||
|
}"
|
||||||
|
end
|
||||||
|
device ref cnvi_wifi on
|
||||||
|
chip drivers/wifi/generic
|
||||||
|
register "wake" = "GPE0_PME_B0"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pcie_rp8 off end
|
||||||
|
device ref pcie_rp9 off end
|
||||||
|
device ref tcss_dma0 on
|
||||||
|
chip drivers/intel/usb4/retimer
|
||||||
|
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||||
|
use tcss_usb3_port1 as dfp[0].typec_port
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref tcss_dma1 on
|
||||||
|
chip drivers/intel/usb4/retimer
|
||||||
|
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||||
|
use tcss_usb3_port3 as dfp[0].typec_port
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c0 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""10EC5682""
|
||||||
|
register "name" = ""RT58""
|
||||||
|
register "desc" = ""Headset Codec""
|
||||||
|
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||||
|
# Set the jd_src to RT5668_JD1 for jack detection
|
||||||
|
register "property_count" = "1"
|
||||||
|
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||||
|
register "property_list[0].name" = ""realtek,jd-src""
|
||||||
|
register "property_list[0].integer" = "1"
|
||||||
|
device i2c 1a on
|
||||||
|
probe AUDIO MAX98360_ALC5682I_I2S
|
||||||
|
end
|
||||||
|
end
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""RTL5682""
|
||||||
|
register "name" = ""RT58""
|
||||||
|
register "desc" = ""Headset Codec""
|
||||||
|
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
|
||||||
|
# Set the jd_src to RT5668_JD1 for jack detection
|
||||||
|
register "property_count" = "1"
|
||||||
|
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||||
|
register "property_list[0].name" = ""realtek,jd-src""
|
||||||
|
register "property_list[0].integer" = "1"
|
||||||
|
device i2c 1a on
|
||||||
|
probe AUDIO MAX98360_ALC5682IVS_I2S
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end #I2C0
|
||||||
|
device ref i2c1 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""ELAN0001""
|
||||||
|
register "desc" = ""ELAN Touchscreen""
|
||||||
|
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||||
|
register "probed" = "1"
|
||||||
|
register "reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||||
|
register "reset_delay_ms" = "100"
|
||||||
|
register "reset_off_delay_ms" = "5"
|
||||||
|
register "enable_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||||
|
register "enable_delay_ms" = "10"
|
||||||
|
register "enable_off_delay_ms" = "1"
|
||||||
|
register "stop_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||||
|
register "has_power_resource" = "1"
|
||||||
|
device i2c 10 on end
|
||||||
|
end
|
||||||
|
chip drivers/i2c/hid
|
||||||
|
register "generic.hid" = ""GTCH7503""
|
||||||
|
register "generic.desc" = ""G2TOUCH Touchscreen""
|
||||||
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||||
|
register "generic.probed" = "1"
|
||||||
|
register "generic.reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||||
|
register "generic.reset_delay_ms" = "50"
|
||||||
|
register "generic.enable_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||||
|
register "generic.enable_delay_ms" = "1"
|
||||||
|
register "generic.has_power_resource" = "1"
|
||||||
|
register "hid_desc_reg_offset" = "0x01"
|
||||||
|
device i2c 40 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c5 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""ELAN0000""
|
||||||
|
register "desc" = ""ELAN Touchpad""
|
||||||
|
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||||
|
register "wake" = "GPE0_DW2_14"
|
||||||
|
register "probed" = "1"
|
||||||
|
device i2c 15 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref gspi1 on
|
||||||
|
chip drivers/spi/acpi
|
||||||
|
register "name" = ""CRFP""
|
||||||
|
register "hid" = "ACPI_DT_NAMESPACE_HID"
|
||||||
|
register "uid" = "1"
|
||||||
|
register "compat_string" = ""google,cros-ec-spi""
|
||||||
|
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
|
||||||
|
register "wake" = "GPE0_DW2_15"
|
||||||
|
device spi 0 on end
|
||||||
|
end # FPMCU
|
||||||
|
end
|
||||||
|
device ref pch_espi on
|
||||||
|
chip ec/google/chromeec
|
||||||
|
use conn0 as mux_conn[0]
|
||||||
|
use conn1 as mux_conn[1]
|
||||||
|
device pnp 0c09.0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pmc hidden
|
||||||
|
chip drivers/intel/pmc_mux
|
||||||
|
device generic 0 on
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
register "usb2_port_number" = "1"
|
||||||
|
register "usb3_port_number" = "1"
|
||||||
|
device generic 0 alias conn0 on end
|
||||||
|
end
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
register "usb2_port_number" = "3"
|
||||||
|
register "usb3_port_number" = "3"
|
||||||
|
device generic 1 alias conn1 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref tcss_xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref tcss_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||||
|
device ref tcss_usb3_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C2 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||||
|
device ref tcss_usb3_port3 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref xhci_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||||
|
device ref usb2_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(4, 2)"
|
||||||
|
device ref usb2_port2 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C2 (DB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||||
|
device ref usb2_port3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 WWAN""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb2_port4 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Camera""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb2_port6 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port (DB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||||
|
device ref usb2_port9 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Bluetooth""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
register "reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||||
|
device ref usb2_port10 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port (DB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||||
|
device ref usb3_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "group" = "ACPI_PLD_GROUP(4, 2)"
|
||||||
|
device ref usb3_port3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 WWAN""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb3_port4 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
end
|
end
|
||||||
|
|
||||||
end
|
end
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue