fsp_baytrail: Initialize LPC pads in bootblock for port 80

Port 80h codes were coming out of bootblock and romstage scrambled, or
were not coming out at all.  Initializing the LPC signal pads as LPC
fixes that issue.

Change-Id: I16943513f2eb6fe8fa58766aaa82dac182440c34
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7802
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@gmx.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
Martin Roth 2014-12-14 15:43:45 -07:00 committed by Martin Roth
parent c9be93fefe
commit 270e300e12
2 changed files with 23 additions and 0 deletions

View File

@ -286,6 +286,8 @@
#define GPSSUS_GPIO_F1_RANGE_START 11
#define GPSSUS_GPIO_F1_RANGE_END 21
#ifndef __BOOT_BLOCK__
struct soc_gpio_map {
u32 pad_conf0;
u32 pad_conf1;
@ -328,6 +330,8 @@ uint8_t read_ssus_gpio(uint8_t gpio_num);
void configure_ssus_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val);
void configure_score_gpio(uint8_t gpio_num, uint32_t pconf0, uint32_t pad_val);
#endif /* #ifndef __BOOT_BLOCK__ */
/* Functions / defines for changing GPIOs in romstage */
/* SCORE Pad definitions. */
#define UART_RXD_PAD 82
@ -367,6 +371,8 @@ static inline void ssus_select_func(int pad, int func)
write32(pconf0_addr, reg);
}
#ifndef __BOOT_BLOCK__
/* These functions require that the input pad be configured as an input GPIO */
static inline int score_get_gpio(int pad)
{
@ -388,4 +394,6 @@ static inline void ssus_disable_internal_pull(int pad)
write32(ssus_pconf0(pad), read32(ssus_pconf0(pad)) & pull_mask);
}
#endif /* #ifndef __BOOT_BLOCK__ */
#endif /* _BAYTRAIL_GPIO_H_ */

View File

@ -27,6 +27,7 @@
#include <baytrail/spi.h>
#include <baytrail/iomap.h>
#include <baytrail/lpc.h>
#include <baytrail/gpio.h>
#include <reset.h>
/*
@ -100,6 +101,19 @@ static void setup_mmconfig(void)
pci_io_write_config32(IOSF_PCI_DEV, MCR_REG, reg);
}
static const uint8_t lpc_pads[12] = {
70, 68, 67, 66, 69, 71, 65, 72, 86, 90, 88, 92,
};
static void set_up_lpc_pads(void)
{
uint32_t reg = IO_BASE_ADDRESS | SET_BAR_ENABLE;
pci_write_config32(LPC_BDF, IOBASE, reg);
for (reg = 0; reg < 12; reg++)
score_select_func(lpc_pads[reg], 1);
}
static void bootblock_cpu_init(void)
{
@ -109,4 +123,5 @@ static void bootblock_cpu_init(void)
setup_mmconfig();
enable_rom_caching();
enable_spi_prefetch();
set_up_lpc_pads();
}