mb/bap/ode_e20XX: Drop dead code

This code is not even being build-tested. Drop it before it grows moss.

Change-Id: I9cc4fe7c643458c9d2fa124539a0fd21013ef451
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43233
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
This commit is contained in:
Angel Pons 2020-07-07 23:36:25 +02:00
parent a69a687ec7
commit 2825d6cb14
2 changed files with 0 additions and 335 deletions

View File

@ -1,233 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/* No IDE functionality */
#if 0
/*
Scope (_SB) {
Device(PCI0) {
Device(IDEC) {
Name(_ADR, 0x00140001)
#include "ide.asl"
}
}
}
*/
/* Some timing tables */
Name(UDTT, Package(){ /* Udma timing table */
120, 90, 60, 45, 30, 20, 15, 0 /* UDMA modes 0 -> 6 */
})
Name(MDTT, Package(){ /* MWDma timing table */
480, 150, 120, 0 /* Legacy DMA modes 0 -> 2 */
})
Name(POTT, Package(){ /* Pio timing table */
600, 390, 270, 180, 120, 0 /* PIO modes 0 -> 4 */
})
/* Some timing register value tables */
Name(MDRT, Package(){ /* MWDma timing register table */
0x77, 0x21, 0x20, 0xFF /* Legacy DMA modes 0 -> 2 */
})
Name(PORT, Package(){
0x99, 0x47, 0x34, 0x22, 0x20, 0x99 /* PIO modes 0 -> 4 */
})
OperationRegion(ICRG, PCI_Config, 0x40, 0x20) /* ide control registers */
Field(ICRG, AnyAcc, NoLock, Preserve)
{
PPTS, 8, /* Primary PIO Slave Timing */
PPTM, 8, /* Primary PIO Master Timing */
OFFSET(0x04), PMTS, 8, /* Primary MWDMA Slave Timing */
PMTM, 8, /* Primary MWDMA Master Timing */
OFFSET(0x08), PPCR, 8, /* Primary PIO Control */
OFFSET(0x0A), PPMM, 4, /* Primary PIO master Mode */
PPSM, 4, /* Primary PIO slave Mode */
OFFSET(0x14), PDCR, 2, /* Primary UDMA Control */
OFFSET(0x16), PDMM, 4, /* Primary UltraDMA Mode */
PDSM, 4, /* Primary UltraDMA Mode */
}
Method(GTTM, 1) /* get total time*/
{
Store(And(Arg0, 0x0F), Local0) /* Recovery Width */
Increment(Local0)
Store(ShiftRight(Arg0, 4), Local1) /* Command Width */
Increment(Local1)
Return(Multiply(30, Add(Local0, Local1)))
}
Device(PRID)
{
Name (_ADR, Zero)
Method(_GTM, 0)
{
NAME(OTBF, Buffer(20) { /* out buffer */
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
})
CreateDwordField(OTBF, 0, PSD0) /* PIO spd0 */
CreateDwordField(OTBF, 4, DSD0) /* DMA spd0 */
CreateDwordField(OTBF, 8, PSD1) /* PIO spd1 */
CreateDwordField(OTBF, 12, DSD1) /* DMA spd1 */
CreateDwordField(OTBF, 16, BFFG) /* buffer flags */
/* Just return if the channel is disabled */
If(And(PPCR, 0x01)) { /* primary PIO control */
Return(OTBF)
}
/* Always tell them independent timing available and IOChannelReady used on both drives */
Or(BFFG, 0x1A, BFFG)
/* save total time of primary PIO master timing to PIO spd0 */
Store(GTTM(PPTM), PSD0)
/* save total time of primary PIO slave Timing to PIO spd1 */
Store(GTTM(PPTS), PSD1)
If(And(PDCR, 0x01)) { /* It's under UDMA mode */
Or(BFFG, 0x01, BFFG)
Store(DerefOf(Index(UDTT, PDMM)), DSD0)
}
Else {
Store(GTTM(PMTM), DSD0) /* Primary MWDMA Master Timing, DmaSpd0 */
}
If(And(PDCR, 0x02)) { /* It's under UDMA mode */
Or(BFFG, 0x04, BFFG)
Store(DerefOf(Index(UDTT, PDSM)), DSD1)
}
Else {
Store(GTTM(PMTS), DSD1) /* Primary MWDMA Slave Timing, DmaSpd0 */
}
Return(OTBF) /* out buffer */
} /* End Method(_GTM) */
Method(_STM, 3, NotSerialized)
{
NAME(INBF, Buffer(20) { /* in buffer */
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00
})
CreateDwordField(INBF, 0, PSD0) /* PIO spd0 */
CreateDwordField(INBF, 4, DSD0) /* PIO spd0 */
CreateDwordField(INBF, 8, PSD1) /* PIO spd1 */
CreateDwordField(INBF, 12, DSD1) /* DMA spd1 */
CreateDwordField(INBF, 16, BFFG) /*buffer flag */
Store(Match(POTT, MLE, PSD0, MTR, 0, 0), Local0)
Divide(Local0, 5, PPMM,) /* Primary PIO master Mode */
Store(Match(POTT, MLE, PSD1, MTR, 0, 0), Local1)
Divide(Local1, 5, PPSM,) /* Primary PIO slave Mode */
Store(DerefOf(Index(PORT, Local0)), PPTM) /* Primary PIO Master Timing */
Store(DerefOf(Index(PORT, Local1)), PPTS) /* Primary PIO Slave Timing */
If(And(BFFG, 0x01)) { /* Drive 0 is under UDMA mode */
Store(Match(UDTT, MLE, DSD0, MTR, 0, 0), Local0)
Divide(Local0, 7, PDMM,)
Or(PDCR, 0x01, PDCR)
}
Else {
If(LNotEqual(DSD0, 0xFFFFFFFF)) {
Store(Match(MDTT, MLE, DSD0, MTR, 0, 0), Local0)
Store(DerefOf(Index(MDRT, Local0)), PMTM)
}
}
If(And(BFFG, 0x04)) { /* Drive 1 is under UDMA mode */
Store(Match(UDTT, MLE, DSD1, MTR, 0, 0), Local0)
Divide(Local0, 7, PDSM,)
Or(PDCR, 0x02, PDCR)
}
Else {
If(LNotEqual(DSD1, 0xFFFFFFFF)) {
Store(Match(MDTT, MLE, DSD1, MTR, 0, 0), Local0)
Store(DerefOf(Index(MDRT, Local0)), PMTS)
}
}
/* Return(INBF) */
} /*End Method(_STM) */
Device(MST)
{
Name(_ADR, 0)
Method(_GTF) {
Name(CMBF, Buffer(21) {
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
})
CreateByteField(CMBF, 1, POMD)
CreateByteField(CMBF, 8, DMMD)
CreateByteField(CMBF, 5, CMDA)
CreateByteField(CMBF, 12, CMDB)
CreateByteField(CMBF, 19, CMDC)
Store(0xA0, CMDA)
Store(0xA0, CMDB)
Store(0xA0, CMDC)
Or(PPMM, 0x08, POMD)
If(And(PDCR, 0x01)) {
Or(PDMM, 0x40, DMMD)
}
Else {
Store(Match
(MDTT, MLE, GTTM(PMTM),
MTR, 0, 0), Local0)
If(LLess(Local0, 3)) {
Or(0x20, Local0, DMMD)
}
}
Return(CMBF)
}
} /* End Device(MST) */
Device(SLAV)
{
Name(_ADR, 1)
Method(_GTF) {
Name(CMBF, Buffer(21) {
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x03, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xEF,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF5
})
CreateByteField(CMBF, 1, POMD)
CreateByteField(CMBF, 8, DMMD)
CreateByteField(CMBF, 5, CMDA)
CreateByteField(CMBF, 12, CMDB)
CreateByteField(CMBF, 19, CMDC)
Store(0xB0, CMDA)
Store(0xB0, CMDB)
Store(0xB0, CMDC)
Or(PPSM, 0x08, POMD)
If(And(PDCR, 0x02)) {
Or(PDSM, 0x40, DMMD)
}
Else {
Store(Match
(MDTT, MLE, GTTM(PMTS),
MTR, 0, 0), Local0)
If(LLess(Local0, 3)) {
Or(0x20, Local0, DMMD)
}
}
Return(CMBF)
}
} /* End Device(SLAV) */
}
#endif

View File

@ -1,15 +1,5 @@
/* SPDX-License-Identifier: GPL-2.0-only */ /* SPDX-License-Identifier: GPL-2.0-only */
/* simple name description */
/*
#include <acpi/acpi.h>
DefinitionBlock ("DSDT.AML", "DSDT", 0x01, OEM_ID, ACPI_TABLE_CREATOR, 0x00010001
)
{
#include "usb.asl"
}
*/
/* USB overcurrent mapping pins. */ /* USB overcurrent mapping pins. */
Name(UOM0, 0) Name(UOM0, 0)
Name(UOM1, 2) Name(UOM1, 2)
@ -21,95 +11,3 @@ Name(UOM6, 6)
Name(UOM7, 2) Name(UOM7, 2)
Name(UOM8, 6) Name(UOM8, 6)
Name(UOM9, 6) Name(UOM9, 6)
/* USB Overcurrent GPEs */
#if 0 /* TODO: Update */
Method(UCOC, 0) {
Sleep(20)
Store(0x13,CMTI)
Store(0,GPSL)
}
/* USB Port 0 overcurrent uses Gpm 0 */
If(LLessEqual(UOM0,9)) {
Scope (\_GPE) {
Method (_L13) {
}
}
}
/* USB Port 1 overcurrent uses Gpm 1 */
If (LLessEqual(UOM1,9)) {
Scope (\_GPE) {
Method (_L14) {
}
}
}
/* USB Port 2 overcurrent uses Gpm 2 */
If (LLessEqual(UOM2,9)) {
Scope (\_GPE) {
Method (_L15) {
}
}
}
/* USB Port 3 overcurrent uses Gpm 3 */
If (LLessEqual(UOM3,9)) {
Scope (\_GPE) {
Method (_L16) {
}
}
}
/* USB Port 4 overcurrent uses Gpm 4 */
If (LLessEqual(UOM4,9)) {
Scope (\_GPE) {
Method (_L19) {
}
}
}
/* USB Port 5 overcurrent uses Gpm 5 */
If (LLessEqual(UOM5,9)) {
Scope (\_GPE) {
Method (_L1A) {
}
}
}
/* USB Port 6 overcurrent uses Gpm 6 */
If (LLessEqual(UOM6,9)) {
Scope (\_GPE) {
/* Method (_L1C) { */
Method (_L06) {
}
}
}
/* USB Port 7 overcurrent uses Gpm 7 */
If (LLessEqual(UOM7,9)) {
Scope (\_GPE) {
/* Method (_L1D) { */
Method (_L07) {
}
}
}
/* USB Port 8 overcurrent uses Gpm 8 */
If (LLessEqual(UOM8,9)) {
Scope (\_GPE) {
Method (_L17) {
}
}
}
/* USB Port 9 overcurrent uses Gpm 9 */
If (LLessEqual(UOM9,9)) {
Scope (\_GPE) {
Method (_L0E) {
}
}
}
#endif