diff --git a/src/soc/intel/common/block/gpio/gpio.c b/src/soc/intel/common/block/gpio/gpio.c
index 9b6ca7e1d5..c3b0ebfa25 100644
--- a/src/soc/intel/common/block/gpio/gpio.c
+++ b/src/soc/intel/common/block/gpio/gpio.c
@@ -397,10 +397,26 @@ void gpio_set(gpio_t gpio_num, int value)
 
 uint16_t gpio_acpi_pin(gpio_t gpio_num)
 {
-	if (!IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_MULTI_ACPI_DEVICES))
+	const struct pad_community *comm;
+	size_t group, pin;
+
+	if (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_GPIO_MULTI_ACPI_DEVICES))
+		return relative_pad_in_comm(gpio_get_community(gpio_num),
+					    gpio_num);
+
+	comm = gpio_get_community(gpio_num);
+	pin = relative_pad_in_comm(comm, gpio_num);
+	group = gpio_group_index(comm, pin);
+
+	/* If pad base is not set then use GPIO number as ACPI pin number. */
+	if (comm->groups[group].acpi_pad_base == PAD_BASE_NONE)
 		return gpio_num;
 
-	return relative_pad_in_comm(gpio_get_community(gpio_num), gpio_num);
+	/*
+	 * If this group has a non-zero pad base then compute the ACPI pin
+	 * number from the pad base and the relative pad in the group.
+	 */
+	return comm->groups[group].acpi_pad_base + gpio_within_group(comm, pin);
 }
 
 static void print_gpi_status(const struct gpi_status *sts)
diff --git a/src/soc/intel/common/block/include/intelblocks/gpio.h b/src/soc/intel/common/block/include/intelblocks/gpio.h
index 4e26db3619..c389ec4531 100644
--- a/src/soc/intel/common/block/include/intelblocks/gpio.h
+++ b/src/soc/intel/common/block/include/intelblocks/gpio.h
@@ -23,12 +23,29 @@
 #ifndef __ACPI__
 #include <types.h>
 
-#define INTEL_GPP(first_of_community, start_of_group, end_of_group) \
-	{                                               \
-		.first_pad = (start_of_group) - (first_of_community), \
-		.size = (end_of_group) - (start_of_group) + 1,        \
+/*
+ * GPIO numbers may not be contiguous and instead will have a different
+ * starting pin number for each pad group.
+ */
+#define INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+			group_pad_base)					\
+	{								\
+		.first_pad = (start_of_group) - (first_of_community),	\
+		.size = (end_of_group) - (start_of_group) + 1,		\
+		.acpi_pad_base = (group_pad_base),			\
 	}
 
+/*
+ * A pad base of -1 indicates that this group uses contiguous numbering
+ * and a pad base should not be used for this group.
+ */
+#define PAD_BASE_NONE	-1
+
+/* The common/default group numbering is contiguous */
+#define INTEL_GPP(first_of_community, start_of_group, end_of_group)	\
+	INTEL_GPP_BASE(first_of_community, start_of_group, end_of_group,\
+		       PAD_BASE_NONE)
+
 /*
  * Following should be defined in soc/gpio.h
  * GPIO_MISCCFG - offset to GPIO MISCCFG Register
@@ -67,6 +84,13 @@ struct pad_group {
 	int		first_pad; /* offset of first pad of the group relative
 	to the community */
 	unsigned int	size; /* Size of the group */
+	/*
+	 * This is the starting pin number for the pads in this group when
+	 * they are used in ACPI.  This is only needed if the pins are not
+	 * contiguous across groups, most groups will have this set to
+	 * PAD_BASE_NONE and use contiguous numbering for ACPI.
+	 */
+	int		acpi_pad_base;
 };
 
 /* This structure will be used to describe a community or each group within a