diff --git a/src/mainboard/supermicro/x6dhe_g2/auto.updated.c b/src/mainboard/supermicro/x6dhe_g2/auto.updated.c
deleted file mode 100644
index 83180ab83d..0000000000
--- a/src/mainboard/supermicro/x6dhe_g2/auto.updated.c
+++ /dev/null
@@ -1,152 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <cpu/x86/lapic.h>
-#include <stdlib.h>
-#include "option_table.h"
-#include "pc80/mc146818rtc_early.c"
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "lib/ramtest.c"
-#include "southbridge/intel/esb6300/esb6300_early_smbus.c"
-#include "northbridge/intel/e7520/raminit.h"
-#include "superio/winbond/w83627hf/w83627hf.h"
-#include "cpu/x86/lapic/boot_cpu.c"
-#include "cpu/x86/mtrr/earlymtrr.c"
-#include "debug.c"
-#include "watchdog.c"
-#include "reset.c"
-#include "x6dhe_g_fixups.c"
-#include "superio/winbond/w83627hf/w83627hf_early_init.c"
-#include "northbridge/intel/e7520/memory_initialized.c"
-#include "cpu/x86/bist.h"
-
-
-#define SIO_GPIO_BASE 0x680
-#define SIO_XBUS_BASE 0x4880
-
-#define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
-#define HIDDEN_SERIAL_DEV  PNP_DEV(0x2e, W83627HF_SP2)
-
-#define DEVPRES_CONFIG  ( \
-	DEVPRES_D1F0 | \
-	DEVPRES_D2F0 | \
-	DEVPRES_D3F0 | \
-	DEVPRES_D4F0 | \
-	DEVPRES_D6F0 | \
-	0 )
-#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0)
-
-#define RECVENA_CONFIG  0x0708090a
-#define RECVENB_CONFIG  0x0708090a
-
-static inline void activate_spd_rom(const struct mem_controller *ctrl)
-{
-	/* nothing to do */
-}
-static inline int spd_read_byte(unsigned device, unsigned address)
-{
-	return smbus_read_byte(device, address);
-}
-
-#include "northbridge/intel/e7520/raminit.c"
-#include "lib/generic_sdram.c"
-
-
-static void main(unsigned long bist)
-{
-	/*
-	 * 
-	 * 
-	 */
-	static const struct mem_controller mch[] = {
-		{
-			.node_id = 0,
-			.f0 = PCI_DEV(0, 0x00, 0),
-			.f1 = PCI_DEV(0, 0x00, 1),
-			.f2 = PCI_DEV(0, 0x00, 2),
-			.f3 = PCI_DEV(0, 0x00, 3),
-		    	.channel0 = {(0xa<<3)|3, (0xa<<3)|2, (0xa<<3)|1, (0xa<<3)|0, },
-			.channel1 = {(0xa<<3)|7, (0xa<<3)|6, (0xa<<3)|5, (0xa<<3)|4, },
-
-		}
-	};
-
-	if (bist == 0) {
-		/* Skip this if there was a built in self test failure */
-		early_mtrr_init();
-		if (memory_initialized()) {
-			asm volatile ("jmp __cpu_reset");
-		}
-	}
-	/* Setup the console */
-	outb(0x87,0x2e);
-	outb(0x87,0x2e);
-	pnp_write_config(CONSOLE_SERIAL_DEV, 0x24, 0x84 | (1 << 6));
-	w83627hf_enable_dev(CONSOLE_SERIAL_DEV, CONFIG_TTYS0_BASE);
-	uart_init();
-	console_init();
-
-	/* Halt if there was a built in self test failure */
-//	report_bist_failure(bist);
-
-	/* MOVE ME TO A BETTER LOCATION !!! */
-	/* config LPC decode for flash memory access */
-        device_t dev;
-        dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
-        if (dev == PCI_DEV_INVALID) {
-                die("Missing esb6300?");
-        }
-        pci_write_config32(dev, 0xe8, 0x00000000);
-        pci_write_config8(dev, 0xf0, 0x00);
-
-#if 0
-	display_cpuid_update_microcode();
-#endif
-#if 0
-	print_pci_devices();
-#endif
-#if 1
-	enable_smbus();
-#endif
-#if 0
-//	dump_spd_registers(&cpu[0]);
-	int i;
-	for(i = 0; i < 1; i++) {
-		dump_spd_registers();
-	}
-#endif
-	disable_watchdogs();
-//	dump_ipmi_registers();
-//	mainboard_set_e7520_leds();	
-//	memreset_setup();
-	sdram_initialize(ARRAY_SIZE(mch), mch);
-#if 0
-	dump_pci_devices();
-#endif
-#if 1
-	dump_pci_device(PCI_DEV(0, 0x00, 0));
-	//dump_bar14(PCI_DEV(0, 0x00, 0));
-#endif
-
-#if 0 // temporarily disabled 
-	/* Check the first 1M */
-//	ram_check(0x00000000, 0x000100000);
-//	ram_check(0x00000000, 0x000a0000);
-	ram_check(0x00100000, 0x01000000);
-	/* check the first 1M in the 3rd Gig */
-	ram_check(0x30100000, 0x31000000);
-#endif
-#if 0
-	ram_check(0x00000000, 0x02000000);
-#endif
-	
-#if 0	
-	while(1) {
-		hlt();
-	}
-#endif
-}