Drop W83627THF, it's the same device as W83627THG.

The only difference is that the "G" version is in a Pb-free package, which
is not relevant from a programmer's view.

We keep W83627THG (and drop W83627THF) because:

 - The W83627THF had a CIR device / LDN which doesn't actually exist.

 - The W83627THF had no GPIO2, GPIO3 LDNs (were commented out).

 - The W83627THF didn't use the PNP_MSC0/1 which is needed/used by boards.

This also fixes an issue on MSI MS7135's devicetree.cb:

  device pnp 4e.6 off end           # XXX keep allocator happy

The line above can be (and is) removed, as it was only needed due to the
incorrect CIR LDN in the W83627THF.

In the iwill/dk8x target: Drop incorrect LDNs 4 and 6, add 0xb.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6080 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2010-11-16 23:15:37 +00:00
parent 3226cf8b9c
commit 2b6e93bd7a
15 changed files with 16 additions and 286 deletions

View File

@ -8,7 +8,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
select SOUTHBRIDGE_AMD_AMD8111
select SOUTHBRIDGE_AMD_AMD8131
select SUPERIO_WINBOND_W83627THF
select SUPERIO_WINBOND_W83627THG
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_MP_TABLE

View File

@ -25,18 +25,18 @@ chip northbridge/amd/amdk8/root_complex
device pci 1.0 off end
end
device pci 1.0 on
chip superio/winbond/w83627thf
# TODO: This is incomplete.
chip superio/winbond/w83627thg
device pnp 2e.0 on end
device pnp 2e.1 on end
device pnp 2e.2 on end
device pnp 2e.3 on end
device pnp 2e.4 on end
device pnp 2e.5 on end
device pnp 2e.6 on end
device pnp 2e.7 on end
device pnp 2e.8 on end
device pnp 2e.9 on end
device pnp 2e.a on end
device pnp 2e.b on end
end
end
device pci 1.1 on end

View File

@ -6,7 +6,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select CPU_INTEL_SOCKET_MPGA479M
select NORTHBRIDGE_INTEL_I855
select SOUTHBRIDGE_INTEL_I82801DX
select SUPERIO_WINBOND_W83627THF
select SUPERIO_WINBOND_W83627THG
select HAVE_OPTION_TABLE
select HAVE_PIRQ_TABLE
select HAVE_HARD_RESET

View File

@ -13,7 +13,7 @@ chip northbridge/intel/i855
register "enable_usb" = "0"
register "enable_native_ide" = "0"
device pci 1f.0 on
chip superio/winbond/w83627thf # link 1
chip superio/winbond/w83627thg # link 1
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
@ -37,7 +37,6 @@ chip northbridge/intel/i855
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.6 off end # CIR
device pnp 2e.7 off end # GAME_MIDI_GIPO1
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3

View File

@ -34,11 +34,11 @@
#include "southbridge/intel/i82801dx/i82801dx_early_smbus.c"
#include "northbridge/intel/i855/raminit.h"
#include "northbridge/intel/i855/debug.c"
#include "superio/winbond/w83627thf/w83627thf_early_serial.c"
#include "superio/winbond/w83627thg/w83627thg_early_serial.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x2e, W83627THF_SP1)
#define SERIAL_DEV PNP_DEV(0x2e, W83627THG_SP1)
static inline int spd_read_byte(unsigned device, unsigned address)
{
@ -65,7 +65,7 @@ void main(unsigned long bist)
#endif
}
w83627thf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
w83627thg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();

View File

@ -7,7 +7,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select NORTHBRIDGE_AMD_AMDK8
select NORTHBRIDGE_AMD_AMDK8_ROOT_COMPLEX
select SOUTHBRIDGE_NVIDIA_CK804
select SUPERIO_WINBOND_W83627THF
select SUPERIO_WINBOND_W83627THG
select HAVE_BUS_CONFIG
select HAVE_HARD_RESET
select HAVE_OPTION_TABLE

View File

@ -11,7 +11,7 @@ chip northbridge/amd/amdk8/root_complex # Root complex
chip southbridge/nvidia/ck804 # Southbridge
device pci 0.0 on end # HT
device pci 1.0 on # LPC
chip superio/winbond/w83627thf # Super I/O
chip superio/winbond/w83627thg # Super I/O
device pnp 4e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
@ -30,14 +30,13 @@ chip northbridge/amd/amdk8/root_complex # Root complex
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 4e.5 on # PS/2 keyboard
device pnp 4e.5 on # PS/2 keyboard & mouse
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 4e.6 off end # XXX keep allocator happy
device pnp 4e.7 off end # Game, MIDI, GPIO 1, GPIO 5
device pnp 4e.7 off end # Game port, MIDI, GPIO 1 & 5
device pnp 4e.8 off end # GPIO 2
device pnp 4e.9 off end # GPIO 3, GPIO 4
device pnp 4e.a off end # ACPI

View File

@ -22,7 +22,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define SERIAL_DEV PNP_DEV(0x4e, W83627THF_SP1)
#define SERIAL_DEV PNP_DEV(0x4e, W83627THG_SP1)
#if CONFIG_LOGICAL_CPUS == 1
#define SET_NB_CFG_54 1
@ -38,7 +38,7 @@
#include <pc80/mc146818rtc.h>
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "superio/winbond/w83627thf/w83627thf_early_serial.c"
#include "superio/winbond/w83627thg/w83627thg_early_serial.c"
#include <cpu/amd/model_fxx_rev.h>
#include <console/console.h>
@ -123,7 +123,7 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
bsp_apicid = init_cpus(cpu_init_detectedx);
}
w83627thf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
w83627thg_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();

View File

@ -4,8 +4,6 @@ config SUPERIO_WINBOND_W83627EHG
bool
config SUPERIO_WINBOND_W83627HF
bool
config SUPERIO_WINBOND_W83627THF
bool
config SUPERIO_WINBOND_W83627THG
bool
config SUPERIO_WINBOND_W83627UHG

View File

@ -1,7 +1,6 @@
subdirs-y += w83627dhg
subdirs-y += w83627ehg
subdirs-y += w83627hf
subdirs-y += w83627thf
subdirs-y += w83627thg
subdirs-y += w83627uhg
subdirs-y += w83697hf

View File

@ -1,24 +0,0 @@
##
## This file is part of the coreboot project.
##
## Copyright (C) 2000 AG Electronics Ltd.
## Copyright (C) 2003-2004 Linux Networx
## Copyright (C) 2004 Tyan By LYH change from PC87360
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
##
ramstage-$(CONFIG_SUPERIO_WINBOND_W83627THF) += superio.c

View File

@ -1,36 +0,0 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2000 AG Electronics Ltd.
* Copyright (C) 2003-2004 Linux Networx
* Copyright (C) 2004 Tyan
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef SUPERIO_WINBOND_W83627THF_CHIP_H
#define SUPERIO_WINBOND_W83627THF_CHIP_H
#include <pc80/keyboard.h>
#include <uart8250.h>
extern struct chip_operations superio_winbond_w83627thf_ops;
struct superio_winbond_w83627thf_config {
struct uart8250 com1, com2;
struct pc_keyboard keyboard;
};
#endif

View File

@ -1,120 +0,0 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2000 AG Electronics Ltd.
* Copyright (C) 2003-2004 Linux Networx
* Copyright (C) 2004 Tyan
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/io.h>
#include <device/device.h>
#include <device/pnp.h>
#include <console/console.h>
#include <string.h>
#include <bitops.h>
#include <uart8250.h>
#include <pc80/keyboard.h>
#include <stdlib.h>
#include "chip.h"
#include "w83627thf.h"
static void w83627thf_enter_ext_func_mode(device_t dev)
{
outb(0x87, dev->path.pnp.port);
outb(0x87, dev->path.pnp.port);
}
static void w83627thf_exit_ext_func_mode(device_t dev)
{
outb(0xaa, dev->path.pnp.port);
}
static void w83627thf_init(device_t dev)
{
struct superio_winbond_w83627thf_config *conf = dev->chip_info;
struct resource *res0;
if (!dev->enabled)
return;
switch(dev->path.pnp.device) {
case W83627THF_SP1:
res0 = find_resource(dev, PNP_IDX_IO0);
init_uart8250(res0->base, &conf->com1);
break;
case W83627THF_SP2:
res0 = find_resource(dev, PNP_IDX_IO0);
init_uart8250(res0->base, &conf->com2);
break;
case W83627THF_KBC:
pc_keyboard_init(&conf->keyboard);
break;
}
}
static void w83627thf_set_resources(device_t dev)
{
w83627thf_enter_ext_func_mode(dev);
pnp_set_resources(dev);
w83627thf_exit_ext_func_mode(dev);
}
static void w83627thf_enable_resources(device_t dev)
{
w83627thf_enter_ext_func_mode(dev);
pnp_enable_resources(dev);
w83627thf_exit_ext_func_mode(dev);
}
static void w83627thf_enable(device_t dev)
{
w83627thf_enter_ext_func_mode(dev);
pnp_enable(dev);
w83627thf_exit_ext_func_mode(dev);
}
static struct device_operations ops = {
.read_resources = pnp_read_resources,
.set_resources = w83627thf_set_resources,
.enable_resources = w83627thf_enable_resources,
.enable = w83627thf_enable,
.init = w83627thf_init,
};
static struct pnp_info pnp_dev_info[] = {
{ &ops, W83627THF_FDC, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
{ &ops, W83627THF_PP, PNP_IO0 | PNP_IRQ0 | PNP_DRQ0, {0x07f8, 0}, },
{ &ops, W83627THF_SP1, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627THF_SP2, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627THF_KBC, PNP_IO0 | PNP_IO1 | PNP_IRQ0 | PNP_IRQ1, {0x07ff, 0}, {0x07ff, 4}, },
{ &ops, W83627THF_CIR, PNP_IO0 | PNP_IRQ0, {0x07f8, 0}, },
{ &ops, W83627THF_GAME_MIDI_GPIO1, PNP_IO0 | PNP_IO1 | PNP_IRQ0, {0x07ff, 0}, {0x07fe, 4}, },
/* { W83627THF_GPIO2, }, */
/* { W83627THF_GPIO3, }, */
{ &ops, W83627THF_ACPI, PNP_IRQ0, },
{ &ops, W83627THF_HWM, PNP_IO0 | PNP_IRQ0, {0x0ff8, 0}, },
};
static void enable_dev(device_t dev)
{
pnp_enable_devices(dev, &ops, ARRAY_SIZE(pnp_dev_info), pnp_dev_info);
}
struct chip_operations superio_winbond_w83627thf_ops = {
CHIP_NAME("Winbond W83627THF Super I/O")
.enable_dev = enable_dev,
};

View File

@ -1,38 +0,0 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2000 AG Electronics Ltd.
* Copyright (C) 2003-2004 Linux Networx
* Copyright (C) 2004 Tyan
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef SUPERIO_WINBOND_W83627THF_W83627THF_H
#define SUPERIO_WINBOND_W83627THF_W83627THF_H
#define W83627THF_FDC 0 /* Floppy */
#define W83627THF_PP 1 /* Parallel port */
#define W83627THF_SP1 2 /* Com1 */
#define W83627THF_SP2 3 /* Com2 */
#define W83627THF_KBC 5 /* PS/2 keyboard & mouse */
#define W83627THF_CIR 6
#define W83627THF_GAME_MIDI_GPIO1 7
#define W83627THF_GPIO2 8
#define W83627THF_GPIO3 9
#define W83627THF_ACPI 10
#define W83627THF_HWM 11 /* Hardware monitor */
#endif

View File

@ -1,47 +0,0 @@
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2000 AG Electronics Ltd.
* Copyright (C) 2003-2004 Linux Networx
* Copyright (C) 2004 Tyan
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/romcc_io.h>
#include "w83627thf.h"
static void pnp_enter_ext_func_mode(device_t dev)
{
u16 port = dev >> 8;
outb(0x87, port);
outb(0x87, port);
}
static void pnp_exit_ext_func_mode(device_t dev)
{
u16 port = dev >> 8;
outb(0xaa, port);
}
static void w83627thf_enable_serial(device_t dev, u16 iobase)
{
pnp_enter_ext_func_mode(dev);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
pnp_set_enable(dev, 1);
pnp_exit_ext_func_mode(dev);
}