From 2b7693d63a4e9c160a611f4e2cf5df29bc81d2b5 Mon Sep 17 00:00:00 2001 From: Yen Lin Date: Tue, 2 Jun 2015 17:40:31 -0700 Subject: [PATCH] t210: Add tegra_lp0_resume code BUG=chrome-os-partner:40741 BRANCH=None TEST=tested on Smaug; able to suspend/resume Change-Id: I3e796bee4b1bedfd4cce0a37549108d5271658a6 Signed-off-by: Patrick Georgi Original-Commit-Id: 207ca26cb2c157c0dcf476c4d4973b4d4ec67cc7 Original-Change-Id: I8565d4cf1632d6d3023aa55b2bff824a092f2c3b Original-Signed-off-by: Yen Lin Original-Reviewed-on: https://chromium-review.googlesource.com/277025 Original-Reviewed-by: Tom Warren Original-Reviewed-by: Furquan Shaikh Reviewed-on: http://review.coreboot.org/11018 Reviewed-by: Furquan Shaikh Tested-by: build bot (Jenkins) --- .../nvidia/tegra210/lp0/tegra_lp0_resume.c | 759 ++++++++++++------ 1 file changed, 502 insertions(+), 257 deletions(-) diff --git a/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c b/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c index 2011529332..168c95a5d9 100644 --- a/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c +++ b/src/soc/nvidia/tegra210/lp0/tegra_lp0_resume.c @@ -19,18 +19,21 @@ /* Function unit addresses. */ enum { - UP_TAG_BASE = 0X60000000, - TIMER_BASE = 0X60005000, - CLK_RST_BASE = 0X60006000, - FLOW_CTLR_BASE = 0X60007000, + UP_TAG_BASE = 0x60000000, + TIMER_BASE = 0x60005000, + CLK_RST_BASE = 0x60006000, + FLOW_CTLR_BASE = 0x60007000, + SECURE_BOOT_BASE = 0x6000C200, TEGRA_EVP_BASE = 0x6000f000, APB_MISC_BASE = 0x70000000, - PMC_CTLR_BASE = 0X7000e400, - MC_CTLR_BASE = 0X70019000, + PINMUX_BASE = 0x70003000, + PMC_CTLR_BASE = 0x7000e400, + MC_CTLR_BASE = 0x70019000, + FUSE_BASE = 0x7000F800, + EMC_BASE = 0x7001B000, + I2C5_BASE = 0x7000D000 }; - - /* UP tag registers. */ static uint32_t *up_tag_ptr = (void *)(UP_TAG_BASE + 0x0); enum { @@ -41,13 +44,32 @@ enum { /* APB Misc JTAG Configuration Register */ static uint32_t *misc_pp_config_ctl_ptr = (void *)(APB_MISC_BASE + 0x24); enum { + PP_CONFIG_CTL_TBE = 0x1 << 7, PP_CONFIG_CTL_JTAG = 0x1 << 6 }; +static uint32_t *misc_gp_asdbgreg_ptr = (void *)(APB_MISC_BASE + 0x810); +enum { + CFG2TMC_RAM_SVOP_PDP_MASK = 0x3 << 24, + CFG2TMC_RAM_SVOP_PDP_VAL_2 = 0x2 << 24, +}; + + +/* PINMUX registers. */ +static uint32_t *pinmux_pwr_i2c_scl_ptr = (void *)(PINMUX_BASE + 0xdc); +static uint32_t *pinmux_pwr_i2c_sda_ptr = (void *)(PINMUX_BASE + 0xe0); +static uint32_t *pinmux_dvfs_pwm_ptr = (void *)(PINMUX_BASE + 0x184); +static uint32_t *pinmux_gpio_pa6_ptr = (void *)(PINMUX_BASE + 0x244); +enum { + E_INPUT = 1 << 6, + TRISTATE = 1 << 4, + PM_CLDVFS = 1, + PM_I2CPMU = 0 +}; /* Timer registers. */ static uint32_t *timer_us_ptr = (void *)(TIMER_BASE + 0x10); - +static uint32_t *timer_us_cfg_ptr = (void *)(TIMER_BASE + 0x14); /* Clock and reset controller registers. */ @@ -56,12 +78,18 @@ enum { SWR_TRIG_SYS_RST = 0x1 << 2 }; -static uint32_t *clk_rst_cclk_burst_policy_ptr = (void *)(CLK_RST_BASE + 0x20); +static uint32_t *clk_rst_cclkg_burst_policy_ptr = (void *)(CLK_RST_BASE + 0x368); enum { - CCLK_PLLP_BURST_POLICY = 0x20004444 + CCLKG_PLLP_BURST_POLICY = 0x20004444 }; -static uint32_t *clk_rst_super_cclk_div_ptr = (void *)(CLK_RST_BASE + 0x24); +static uint32_t *clk_rst_cclklp_burst_policy_ptr = (void *)(CLK_RST_BASE + 0x370); +enum { + CCLKLP_PLLP_BURST_POLICY = 0x20004444 +}; + +static uint32_t *clk_rst_super_cclkg_div_ptr = (void *)(CLK_RST_BASE + 0x36c); +static uint32_t *clk_rst_super_cclklp_div_ptr = (void *)(CLK_RST_BASE + 0x374); enum { SUPER_CDIV_ENB = 0x1 << 31 }; @@ -74,73 +102,61 @@ enum { OSC_FREQ_SHIFT = 28, OSC_FREQ_MASK = 0xf << OSC_FREQ_SHIFT }; -enum { - OSC_FREQ_13 = 0, - OSC_FREQ_16P8 = 1, - OSC_FREQ_19P2 = 4, - OSC_FREQ_38P4 = 5, - OSC_FREQ_12 = 8, - OSC_FREQ_48 = 9, - OSC_FREQ_26 = 12 -}; - -static uint32_t *clk_rst_pllu_base_ptr = (void *)(CLK_RST_BASE + 0xc0); -enum { - PLLU_DIVM_SHIFT = 0, - PLLU_DIVN_SHIFT = 8, - PLLU_OVERRIDE = 0x1 << 24, - PLLU_ENABLE = 0x1 << 30, - PLLU_BYPASS = 0x1 << 31 -}; - -static uint32_t *clk_rst_pllu_misc_ptr = (void *)(CLK_RST_BASE + 0xcc); -enum { - PLLU_LFCON_SHIFT = 4, - PLLU_CPCON_SHIFT = 8, - PLLU_LOCK_ENABLE = 22 -}; static uint32_t *clk_rst_pllx_base_ptr = (void *)(CLK_RST_BASE + 0xe0); enum { PLLX_ENABLE = 0x1 << 30 }; +static uint32_t *clk_rst_clk_source_i2c5_ptr = (void *)(CLK_RST_BASE + 0x128); +enum { + I2C5_CLK_DIVISOR = 4 +}; + +static uint32_t *clk_rst_rst_dev_h_set_ptr = (void *)(CLK_RST_BASE + 0x308); +enum { + I2C5_RST = 0x1 << 15 +}; + +static uint32_t *clk_rst_rst_dev_h_clr_ptr = (void *)(CLK_RST_BASE + 0x30c); + static uint32_t *clk_rst_rst_dev_u_clr_ptr = (void *)(CLK_RST_BASE + 0x314); enum { SWR_CSITE_RST = 0x1 << 9 }; +static uint32_t *clk_rst_rst_dev_v_clr_ptr = (void *)(CLK_RST_BASE + 0x434); +enum { + MSELECT_RST = 0x1 << 3 +}; + static uint32_t *clk_rst_clk_enb_l_set_ptr = (void *)(CLK_RST_BASE + 0x320); enum { CLK_ENB_CPU = 0x1 << 0 }; +static uint32_t *clk_rst_clk_enb_h_set_ptr = (void *)(CLK_RST_BASE + 0x328); +enum { + CLK_ENB_I2C5 = 0x1 << 15 +}; + static uint32_t *clk_rst_clk_out_enb_u_set_ptr = (void *)(CLK_RST_BASE + 0x330); enum { CLK_ENB_CSITE = 0x1 << 9 }; -static uint32_t *clk_rst_cpu_softrst_ctrl2_ptr = - (void *)(CLK_RST_BASE + 0x388); -enum { - CAR2PMC_CPU_ACK_WIDTH_SHIFT = 0, - CAR2PMC_CPU_ACK_WIDTH_MASK = 0xfff << CAR2PMC_CPU_ACK_WIDTH_SHIFT -}; - static uint32_t *clk_rst_clk_enb_v_set_ptr = (void *)(CLK_RST_BASE + 0x440); enum { CLK_ENB_CPUG = 0x1 << 0, - CLK_ENB_CPULP = 0x1 << 1, }; -static uint32_t *clk_rst_rst_cpulp_cmplx_set_ptr = - (void *)(CLK_RST_BASE + 0x450); +static uint32_t *clk_rst_clk_enb_y_set_ptr = (void *)(CLK_RST_BASE + 0x29c); enum { - SET_CXRESET0 = 0x1 << 20, - SET_CXRESET1 = 0x1 << 21 + CLK_ENB_PLLP_OUT_CPU = 0x1 << 31 }; -static uint32_t *clk_rst_rst_cpug_cmplx_clr_ptr = + +static uint32_t *clk_rst_cpug_cmplx_clr_ptr = (void *)(CLK_RST_BASE + 0x454); enum { CLR_CPURESET0 = 0x1 << 0, @@ -164,12 +180,55 @@ enum { CLR_PRESETDBG = 0x1 << 30 }; +static uint32_t *clk_rst_spare_reg0_ptr = + (void *)(CLK_RST_BASE + 0x55c); +enum { + CLK_M_DIVISOR_MASK = 0x3 << 2, + CLK_M_DIVISOR_BY_2 = 0x1 << 2 +}; -/* Reset vector. */ +static uint32_t *clk_rst_clk_out_enb_l_ptr = (void *)(CLK_RST_BASE + 0x10); +static uint32_t *clk_rst_clk_out_enb_h_ptr = (void *)(CLK_RST_BASE + 0x14); +static uint32_t *clk_rst_clk_out_enb_u_ptr = (void *)(CLK_RST_BASE + 0x18); +static uint32_t *clk_rst_clk_out_enb_v_ptr = (void *)(CLK_RST_BASE + 0x360); +static uint32_t *clk_rst_clk_out_enb_w_ptr = (void *)(CLK_RST_BASE + 0x364); +static uint32_t *clk_rst_clk_out_enb_x_ptr = (void *)(CLK_RST_BASE + 0x280); +static uint32_t *clk_rst_clk_out_enb_y_ptr = (void *)(CLK_RST_BASE + 0x298); -static uint32_t *evp_cpu_reset_ptr = (void *)(TEGRA_EVP_BASE + 0x100); +static uint32_t *clk_rst_clk_enb_l_clr_ptr = (void *)(CLK_RST_BASE + 0x324); +static uint32_t *clk_rst_clk_enb_h_clr_ptr = (void *)(CLK_RST_BASE + 0x32c); +static uint32_t *clk_rst_clk_enb_u_clr_ptr = (void *)(CLK_RST_BASE + 0x334); +static uint32_t *clk_rst_clk_enb_v_clr_ptr = (void *)(CLK_RST_BASE + 0x444); +static uint32_t *clk_rst_clk_enb_w_clr_ptr = (void *)(CLK_RST_BASE + 0x44c); +static uint32_t *clk_rst_clk_enb_x_clr_ptr = (void *)(CLK_RST_BASE + 0x288); +static uint32_t *clk_rst_clk_enb_y_clr_ptr = (void *)(CLK_RST_BASE + 0x2a0); +static uint32_t *clk_rst_clk_enb_v_ptr = (void *)(CLK_RST_BASE + 0x440); +enum { + CLK_ENB_MSELECT = 0x1 << 3 +}; +static uint32_t *clk_rst_clk_enb_w_set_ptr = (void *)(CLK_RST_BASE + 0x448); +enum { + CLK_ENB_MC1 = 0x1 << 30, + CLK_ENB_DVFS = 0x1 << 27 +}; + +static uint32_t *clk_rst_clk_source_mselect_ptr = (void *)(CLK_RST_BASE + 0x3b4); +enum { + CLK_SRC_PLLP_OUT0 = (0x0 << 29), + MSELECT_CLK_DIVISOR_4 = 6 +}; + +static uint32_t *clk_rst_clk_dvfs_ref_ptr = (void *)(CLK_RST_BASE + 0x62c); +enum { + DVFS_REF_CLK_DIVISOR = 0xe +}; + +static uint32_t *clk_rst_clk_dvfs_soc_ptr = (void *)(CLK_RST_BASE + 0x630); +enum { + DVFS_SOC_CLK_DIVISOR = 0xe +}; /* Flow controller registers. */ static uint32_t *flow_ctlr_halt_cop_events_ptr = @@ -181,12 +240,6 @@ enum { FLOW_MODE_STOP = 2 << FLOW_MODE_SHIFT, }; -static uint32_t *flow_ctlr_cluster_control_ptr = - (void *)(FLOW_CTLR_BASE + 0x2c); -enum { - FLOW_CLUSTER_ACTIVE_LP = 0x1 << 0 -}; - static uint32_t *flow_ctlr_ram_repair_ptr = (void *)(FLOW_CTLR_BASE + 0x40); static uint32_t *flow_ctlr_ram_repair_cluster1_ptr = @@ -196,39 +249,67 @@ enum { RAM_REPAIR_STS = 0x1 << 1, }; +static uint32_t *flow_ctlr_bpmp_cluster_control_ptr = + (void *)(FLOW_CTLR_BASE + 0x98); +enum { + ACTIVE_SLOW = 0x1 << 0 +}; + /* Power management controller registers. */ enum { PARTID_CRAIL = 0, + PARTID_CE1 = 9, + PARTID_CE2 = 10, + PARTID_CE3 = 11, PARTID_CE0 = 14, PARTID_C0NC = 15, }; -static uint32_t *pmc_ctlr_clamp_status_ptr = (void *)(PMC_CTLR_BASE + 0x2c); +static uint32_t *pmc_dpd_sample_ptr = (void *)(PMC_CTLR_BASE + 0x20); +static uint32_t *pmc_clamp_status_ptr = (void *)(PMC_CTLR_BASE + 0x2c); -static uint32_t *pmc_ctlr_pwrgate_toggle_ptr = (void *)(PMC_CTLR_BASE + 0x30); +static uint32_t *pmc_pwrgate_toggle_ptr = (void *)(PMC_CTLR_BASE + 0x30); enum { PWRGATE_TOGGLE_START = 0x1 << 8 }; -static uint32_t *pmc_ctlr_pwrgate_status_ptr = (void *)(PMC_CTLR_BASE + 0x38); +static uint32_t *pmc_remove_clamping_cmd_ptr = (void *)(PMC_CTLR_BASE + 0x34); -static uint32_t *pmc_ctlr_cpupwrgood_timer_ptr = - (void *)(PMC_CTLR_BASE + 0xc8); +static uint32_t *pmc_pwrgate_status_ptr = (void *)(PMC_CTLR_BASE + 0x38); + +static uint32_t *pmc_cpupwrgood_timer_ptr = (void *)(PMC_CTLR_BASE + 0xc8); static uint32_t *pmc_odmdata_ptr = (void *)(PMC_CTLR_BASE + 0xa0); -static uint32_t *pmc_ctlr_scratch41_ptr = (void *)(PMC_CTLR_BASE + 0x140); -static uint32_t *pmc_ctlr_secure_scratch34_ptr = (void *)(PMC_CTLR_BASE + 0x368); -static uint32_t *pmc_ctlr_secure_scratch35_ptr = (void *)(PMC_CTLR_BASE + 0x36c); +static uint32_t *pmc_scratch4_ptr = (void *)(PMC_CTLR_BASE + 0x60); +enum { + PMC_WAKEUP_CLUSTER_LPCPU = 1 << 31 +}; -static uint32_t *pmc_ctlr_osc_edpd_over_ptr = (void *)(PMC_CTLR_BASE + 0x1a4); +static uint32_t *pmc_scratch190_ptr = (void *)(PMC_CTLR_BASE + 0x818); + +/* SCRATCH201 bit 1 is used to designate 77621 PMIC for CPU rail. */ +static uint32_t *pmc_scratch201_ptr = (void *)(PMC_CTLR_BASE + 0x844); +enum { + PMIC_77621 = 0x1 << 1 +}; + +static uint32_t *pmc_secure_scratch34_ptr = (void *)(PMC_CTLR_BASE + 0x368); +static uint32_t *pmc_secure_scratch35_ptr = (void *)(PMC_CTLR_BASE + 0x36c); + +static uint32_t *pmc_osc_edpd_over_ptr = (void *)(PMC_CTLR_BASE + 0x1a4); enum { PMC_XOFS_SHIFT = 1, PMC_XOFS_MASK = 0x3f << PMC_XOFS_SHIFT }; +static uint32_t *pmc_sticky_bits_ptr = (void *)(PMC_CTLR_BASE + 0x2c0); +enum { + HDA_LPBK_DIS = 1 << 0, +}; +static uint32_t *pmc_set_sw_clamp_ptr = (void *)(PMC_CTLR_BASE + 0x47c); /* Memory controller registers. */ static uint32_t *mc_video_protect_size_mb_ptr = (void *)(MC_CTLR_BASE + 0x64c); @@ -236,9 +317,80 @@ static uint32_t *mc_video_protect_size_mb_ptr = (void *)(MC_CTLR_BASE + 0x64c); static uint32_t *mc_video_protect_reg_ctrl_ptr = (void *)(MC_CTLR_BASE + 0x650); enum { - VIDEO_PROTECT_WRITE_ACCESS_DISABLE = 0x1 << 0, - VIDEO_PROTECT_ALLOW_TZ_WRITE_ACCESS = 0x1 << 1 + VPR_WR_ACCESS_DISABLE = 0x1 << 0, + VPR_ALLOW_TZ_WR_ACCESS = 0x1 << 1 }; +/* FUSE registers */ +static uint32_t *fuse_security_mode_ptr = (void *)(FUSE_BASE + 0x1a0); +enum { + SECURITY_MODE = 0x1 << 0 +}; + +/* SECURE_BOOT registers */ +static uint32_t *sb_pfcfg_ptr = (void *)(SECURE_BOOT_BASE + 0x8); +enum { + SECURE_BOOT_DEBUG_CONFIG = 0x1 << 3 +}; + +static uint32_t *sb_aa64_reset_low = (void *)(SECURE_BOOT_BASE + 0x30); +static uint32_t *sb_aa64_reset_high = (void *)(SECURE_BOOT_BASE + 0x34); + + +/* EMC registers */ +static uint32_t *pmacro_cfg_pm_global = (void *)(EMC_BASE + 0xc30); +enum { + DISABLE_CFG_BYTE0 = 0x1 << 16, + DISABLE_CFG_BYTE1 = 0x1 << 17, + DISABLE_CFG_BYTE2 = 0x1 << 18, + DISABLE_CFG_BYTE3 = 0x1 << 19, + DISABLE_CFG_BYTE4 = 0x1 << 20, + DISABLE_CFG_BYTE5 = 0x1 << 21, + DISABLE_CFG_BYTE6 = 0x1 << 22, + DISABLE_CFG_BYTE7 = 0x1 << 23, + DISABLE_CFG_BYTES = 0xff << 16, + ENABLE_CFG_BYTES = 0 << 16, + DISABLE_CFG_CMD0 = 0x1 << 24, + DISABLE_CFG_CMD1 = 0x1 << 25, + DISABLE_CFG_CMD2 = 0x1 << 26, + DISABLE_CFG_CMD3 = 0x1 << 27, +}; + +static uint32_t *pmacro_training_ctrl_0_ptr = (void *)(EMC_BASE + 0xcf8); +static uint32_t *pmacro_training_ctrl_1_ptr = (void *)(EMC_BASE + 0xcfc); +enum { + TRAINING_E_WRPTR = 0x1 << 3 +}; + +/* I2C5 registers */ +static uint32_t *i2c5_cnfg_ptr = (void *)(I2C5_BASE + 0x0); +enum { + I2C_DEBOUNCE_CNT_4 = 2 << 12, + I2C_NEW_MASTER_FSM = 1 << 11, + I2C_SEND = 1 << 9, + I2C_LENGTH_2_BYTES = 1 << 1 +}; + +static uint32_t *i2c5_cmd_addr0_ptr = (void *)(I2C5_BASE + 0x4); +static uint32_t *i2c5_cmd_data1_ptr = (void *)(I2C5_BASE + 0xc); +static uint32_t *i2c5_status_ptr = (void *)(I2C5_BASE + 0x1c); +enum { + I2C_STATUS_BUSY = 1 << 8, + I2C_STATUS_CMD1_STAT_MASK = 0xf << 0, + I2C_STATUS_CMD1_XFER_SUCCESS = 0 << 0 +}; + +static uint32_t *i2c5_config_load_ptr = (void *)(I2C5_BASE + 0x8c); +enum { + MSTR_CONFIG_LOAD = 1 << 0 +}; + +#define MAX77620_I2C_ADDR (0x3c << 1) +#define MAX77620_GPIO5_DATA (0x3b | (0x9 << 8)) + +#define MAX77621_I2C_ADDR (0x1b << 1) +#define MAX77621_VOUT_REG 0x0 +#define MAX77621_VOUT_VAL (0x80 | 0x27) +#define MAX77621_VOUT_DATA (MAX77621_VOUT_REG | (MAX77621_VOUT_VAL << 8)) /* Utility functions. */ @@ -308,15 +460,16 @@ static uint32_t *uart_clk_source_regs[4] = { (uint32_t *)0x60006178, (uint32_t *)0x6000617c, (uint32_t *)0x600061a0, - (uint32_t *)0x600061c0, + (uint32_t *)0x600061c0 }; static uint32_t *uart_base_regs[4] = { (uint32_t *)0x70006000, (uint32_t *)0x70006040, (uint32_t *)0x70006200, - (uint32_t *)0x70006300, + (uint32_t *)0x70006300 }; + enum { UART_THR_DLAB = 0x0, UART_IER_DLAB = 0x1, @@ -329,7 +482,7 @@ enum { FCR_RX_CLR = 0x2, /* bit 1 of FCR : clear RX FIFO */ FCR_EN_FIFO = 0x1, /* bit 0 of FCR : enable TX & RX FIFO */ LCR_DLAB = 0x80, /* bit 7 of LCR : Divisor Latch Access Bit */ - LCR_WD_SIZE_8 = 0x3, /* bit 1:0 of LCR : word length of 8 */ + LCR_WD_SIZE_8 = 0x3 /* bit 1:0 of LCR : word length of 8 */ }; static void enable_uart(void) @@ -386,17 +539,6 @@ static void enable_uart(void) /* Accessors. */ -static uint32_t get_wakeup_vector(void) -{ - return read32(pmc_ctlr_scratch41_ptr); -} - -static unsigned get_osc_freq(void) -{ - return (read32(clk_rst_osc_ctrl_ptr) & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT; -} - - /* Jtag configuration. */ static void enable_jtag(void) @@ -408,9 +550,11 @@ static void enable_jtag(void) static void config_oscillator(void) { - // Read oscillator drive strength from OSC_EDPD_OVER.XOFS and copy - // to OSC_CTRL.XOFS and set XOE. - uint32_t xofs = (read32(pmc_ctlr_osc_edpd_over_ptr) & + /* + * Read oscillator drive strength from OSC_EDPD_OVER.XOFS and copy + * to OSC_CTRL.XOFS and set XOE. + */ + uint32_t xofs = (read32(pmc_osc_edpd_over_ptr) & PMC_XOFS_MASK) >> PMC_XOFS_SHIFT; uint32_t osc_ctrl = read32(clk_rst_osc_ctrl_ptr); @@ -420,75 +564,25 @@ static void config_oscillator(void) write32(clk_rst_osc_ctrl_ptr, osc_ctrl); } -static void config_pllu(void) +static void enable_select_cpu_clocks(void) { - // Figure out what parameters to use for PLLU. - uint32_t divm, divn, cpcon, lfcon; - switch (get_osc_freq()) { - case OSC_FREQ_12: - case OSC_FREQ_48: - divm = 0x0c; - divn = 0x3c0; - cpcon = 0x0c; - lfcon = 0x02; - break; - case OSC_FREQ_16P8: - divm = 0x07; - divn = 0x190; - cpcon = 0x05; - lfcon = 0x02; - break; - case OSC_FREQ_19P2: - case OSC_FREQ_38P4: - divm = 0x04; - divn = 0xc8; - cpcon = 0x03; - lfcon = 0x02; - break; - case OSC_FREQ_26: - divm = 0x1a; - divn = 0x3c0; - cpcon = 0x0c; - lfcon = 0x02; - break; - default: - // Map anything that's not recognized to 13MHz. - divm = 0x0d; - divn = 0x3c0; - cpcon = 0x0c; - lfcon = 0x02; - } - - // Configure PLLU. - uint32_t base = PLLU_BYPASS | PLLU_OVERRIDE | - (divn << PLLU_DIVN_SHIFT) | (divm << PLLU_DIVM_SHIFT); - write32(clk_rst_pllu_base_ptr, base); - uint32_t misc = (cpcon << PLLU_CPCON_SHIFT) | - (lfcon << PLLU_LFCON_SHIFT); - write32(clk_rst_pllu_misc_ptr, misc); - - // Enable PLLU. - base &= ~PLLU_BYPASS; - base |= PLLU_ENABLE; - write32(clk_rst_pllu_base_ptr, base); - misc |= PLLU_LOCK_ENABLE; - write32(clk_rst_pllu_misc_ptr, misc); -} - -static void enable_cpu_clocks(void) -{ - // Enable the CPU complex clock. + /* Enable the CPU complex clock. */ write32(clk_rst_clk_enb_l_set_ptr, CLK_ENB_CPU); - write32(clk_rst_clk_enb_v_set_ptr, CLK_ENB_CPUG | CLK_ENB_CPULP); -} + write32(clk_rst_clk_enb_v_set_ptr, CLK_ENB_CPUG); + udelay(10); + /* Select CPU complex clock source. */ + write32(clk_rst_cclkg_burst_policy_ptr, CCLKG_PLLP_BURST_POLICY); + write32(clk_rst_cclklp_burst_policy_ptr, CCLKLP_PLLP_BURST_POLICY); + udelay(10); +} /* Function unit configuration. */ static void config_core_sight(void) { - // Enable the CoreSight clock. + /* Enable the CoreSight clock. */ write32(clk_rst_clk_out_enb_u_set_ptr, CLK_ENB_CSITE); /* @@ -501,37 +595,15 @@ static void config_core_sight(void) } -/* Resets. */ - -static void clear_cpu_resets(void) -{ - /* Hold CPU1 in reset */ - setbits32(SET_CXRESET1, clk_rst_rst_cpulp_cmplx_set_ptr); - - write32(clk_rst_rst_cpug_cmplx_clr_ptr, - CLR_NONCPURESET | CLR_L2RESET | CLR_PRESETDBG); - - write32(clk_rst_rst_cpug_cmplx_clr_ptr, - CLR_CPURESET0 | CLR_DBGRESET0 | CLR_CORERESET0 | CLR_CXRESET0); -} - - - /* RAM repair */ void ram_repair(void) { - // Request Cluster0 RAM repair. + /* Request Cluster0 RAM repair. */ setbits32(RAM_REPAIR_REQ, flow_ctlr_ram_repair_ptr); - // Poll for Cluster0 RAM repair status. + /* Poll for Cluster0 RAM repair status. */ while (!(read32(flow_ctlr_ram_repair_ptr) & RAM_REPAIR_STS)) ; - - // Request Cluster1 RAM repair. - setbits32(RAM_REPAIR_REQ, flow_ctlr_ram_repair_cluster1_ptr); - // Poll for Cluster1 RAM repair status. - while (!(read32(flow_ctlr_ram_repair_cluster1_ptr) & RAM_REPAIR_STS)) - ; } @@ -540,23 +612,237 @@ void ram_repair(void) static void power_on_partition(unsigned id) { uint32_t bit = 0x1 << id; - if (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) { - // Partition is not on. Turn it on. - write32(pmc_ctlr_pwrgate_toggle_ptr, - id | PWRGATE_TOGGLE_START); + if (!(read32(pmc_pwrgate_status_ptr) & bit)) { + /* Partition is not on. Turn it on. */ + write32(pmc_pwrgate_toggle_ptr, id | PWRGATE_TOGGLE_START); - // Wait until the partition is powerd on. - while (!(read32(pmc_ctlr_pwrgate_status_ptr) & bit)) + /* Wait until the partition is powerd on. */ + while (!(read32(pmc_pwrgate_status_ptr) & bit)) ; - // Wait until clamp is off. - while (read32(pmc_ctlr_clamp_status_ptr) & bit) + /* Wait until clamp is off. */ + while (read32(pmc_clamp_status_ptr) & bit) ; } } -static void power_on_main_cpu(void) +static void config_hda_lpbk_dis(void) { + /* Set HDA_LPBK_DIS bit in APBDEV_PMC_STICKY_BITS_0 register */ + if (read32(fuse_security_mode_ptr) & SECURITY_MODE) + setbits32(HDA_LPBK_DIS, pmc_sticky_bits_ptr); +} + +static void set_gpio_pa6_input_mode(void) +{ + setbits32(E_INPUT, pinmux_gpio_pa6_ptr); +} + +static void set_clk_m(void) +{ + uint32_t spare; + + /* set clk_m frequency to 19.2MHz: set divisor to 2. */ + spare = read32(clk_rst_spare_reg0_ptr); + spare &= ~CLK_M_DIVISOR_MASK; + spare |= CLK_M_DIVISOR_BY_2; + write32(clk_rst_spare_reg0_ptr, spare); + + /* + * Restore TIMERUS config for 19.2MHz. (19.2 = 96/5 = 0x60/5) + * USEC_DIVIDEND(15:8) = 5-1; USEC_DIVISOR(7:0) = 0x60-1 + */ + write32(timer_us_cfg_ptr, 0x045f); +} + +static void restore_ram_svop(void) +{ + uint32_t asdbgreg; + + asdbgreg = read32(misc_gp_asdbgreg_ptr); + asdbgreg &= ~CFG2TMC_RAM_SVOP_PDP_MASK; + asdbgreg |= CFG2TMC_RAM_SVOP_PDP_VAL_2; + write32(misc_gp_asdbgreg_ptr, asdbgreg); +} + +static void set_pmacro_training_wrptr(void) +{ + /* disable writes to BYTES 7-0 of pad macro */ + write32(pmacro_cfg_pm_global, DISABLE_CFG_BYTES); + + /* Set E_WRPTR mode on Channel 0 and 1 */ + write32(pmacro_training_ctrl_0_ptr, TRAINING_E_WRPTR); + write32(pmacro_training_ctrl_1_ptr, TRAINING_E_WRPTR); + + /* Re-enable writes to BYTE0-7 */ + write32(pmacro_cfg_pm_global, ENABLE_CFG_BYTES); +} + +static void config_mselect(void) +{ + /* Set MSELECT clock source to PLL_P with 1:4 divider */ + write32(clk_rst_clk_source_mselect_ptr, + (CLK_SRC_PLLP_OUT0 | MSELECT_CLK_DIVISOR_4)); + /* Enable clock to MSELECT */ + write32(clk_rst_clk_enb_v_ptr, CLK_ENB_MSELECT); + /* Bring MSELECT out of reset, after 2 microsecond wait */ + udelay(2); + write32(clk_rst_rst_dev_v_clr_ptr, MSELECT_RST); +} + +/* Routine to do i2c send of 'data' to 'addr' */ +static void i2c_send(uint32_t addr, uint32_t data) +{ + uint32_t delay; + + write32(i2c5_cmd_addr0_ptr, addr); + write32(i2c5_cmd_data1_ptr, data); + + write32(i2c5_cnfg_ptr, (I2C_DEBOUNCE_CNT_4 | I2C_NEW_MASTER_FSM | + I2C_LENGTH_2_BYTES)); + + write32(i2c5_config_load_ptr, MSTR_CONFIG_LOAD); + delay = 0; + while (read32(i2c5_config_load_ptr) & MSTR_CONFIG_LOAD) { + udelay(1); + if (++delay > 100) + reset(); + } + + write32(i2c5_cnfg_ptr, (I2C_DEBOUNCE_CNT_4 | I2C_NEW_MASTER_FSM | + I2C_SEND | I2C_LENGTH_2_BYTES)); + + /* Check busy */ + delay = 0; + while (read32(i2c5_status_ptr) & I2C_STATUS_BUSY) { + udelay(1); + if (++delay > 1000) + reset(); + } + + /* Check xfer successful; */ + if (read32(i2c5_status_ptr) & I2C_STATUS_CMD1_STAT_MASK) + reset(); +} + +/* Entry point. */ + +void lp0_resume(void) +{ + uint32_t orig_timer; + + /* If not on the AVP, reset. */ + if (read32(up_tag_ptr) != UP_TAG_AVP) + reset(); + + /* Enable JTAG */ + enable_jtag(); + + /* Set HDA_LPBK_DIS bit in APBDEV_PMC_STICKY_BITS_0 register */ + config_hda_lpbk_dis(); + + /* + * From T210 TRM: + * 8.9.1.2 Deep Sleep Exit: + * 5.a: Set the E_INPUT bit of the PINMUX_AUX_GPIO_PA6_0 register + * to Logic 1. + */ + set_gpio_pa6_input_mode(); + + config_oscillator(); + + /* set clk_m frequency to 19.2MHz */ + set_clk_m(); + + /* Restore RAM SVOP setting */ + restore_ram_svop(); + + /* Bad qpop value on cmd pad macros removes clock gating from IB path */ + set_pmacro_training_wrptr(); + + /* + * Find out which CPU (slow or fast) to wake up. The default setting + * in flow controller is to wake up GCPU + */ + if (read32(pmc_scratch4_ptr) & PMC_WAKEUP_CLUSTER_LPCPU) { + setbits32(ACTIVE_SLOW, flow_ctlr_bpmp_cluster_control_ptr); + } + + /* Set the CPU reset vector */ + write32(sb_aa64_reset_low, (read32(pmc_secure_scratch34_ptr) | 1)); + write32(sb_aa64_reset_high, read32(pmc_secure_scratch35_ptr)); + + /* Program SUPER_CCLK_DIVIDER. */ + write32(clk_rst_super_cclkg_div_ptr, SUPER_CDIV_ENB); + write32(clk_rst_super_cclklp_div_ptr, SUPER_CDIV_ENB); + + config_core_sight(); + + /* Set MSELECT clock source to PLL_P with 1:4 divider */ + config_mselect(); + + /* Enable UART */ + enable_uart(); + + /* Disable PLLX since it isn't used in the kernel as CPU clk source. */ + clrbits32(PLLX_ENABLE, clk_rst_pllx_base_ptr); + + /* Clear PMC_SCRATCH190 */ + clrbits32(1, pmc_scratch190_ptr); + + /* Clear PMC_DPD_SAMPLE */ + write32(pmc_dpd_sample_ptr, 0); + udelay(10); + + /* + * Set both _ACCESS bits so that kernel/secure code + * can reconfig VPR careveout as needed from the TrustZone. + */ + write32(mc_video_protect_size_mb_ptr, 0); + write32(mc_video_protect_reg_ctrl_ptr, + VPR_WR_ACCESS_DISABLE | VPR_ALLOW_TZ_WR_ACCESS); + + /* Tristate CLDVFS PWM */ + write32(pinmux_dvfs_pwm_ptr, (TRISTATE | PM_CLDVFS)); + + /* Restore PWR I2C pinmux configuration */ + write32(pinmux_pwr_i2c_scl_ptr, (E_INPUT | PM_I2CPMU)); + write32(pinmux_pwr_i2c_sda_ptr, (E_INPUT | PM_I2CPMU)); + + /* Enable CLDVFS clock */ + write32(clk_rst_clk_enb_w_set_ptr, CLK_ENB_DVFS); + + /* Set CLDVFS clock source and divider */ + write32(clk_rst_clk_dvfs_ref_ptr, DVFS_REF_CLK_DIVISOR); + write32(clk_rst_clk_dvfs_soc_ptr, DVFS_SOC_CLK_DIVISOR); + + /* Enable PWR I2C controller */ + write32(clk_rst_clk_enb_h_set_ptr, CLK_ENB_I2C5); + write32(clk_rst_rst_dev_h_set_ptr, I2C5_RST); + udelay(5); + write32(clk_rst_clk_source_i2c5_ptr, CLK_SRC_PLLP_OUT0 | I2C5_CLK_DIVISOR); + write32(clk_rst_rst_dev_h_clr_ptr, I2C5_RST); + + /* + * Turn on CPU rail: + * SCRATCH201[1] is being used to identify CPU PMIC in warmboot code. + * 0 : OVR2 + * 1 : MAX77621 + */ + if (read32(pmc_scratch201_ptr) & PMIC_77621) + /* Set cpu rail 0.85V */ + i2c_send(MAX77621_I2C_ADDR, MAX77621_VOUT_DATA); + else + /* Enable GPIO5 on MAX77620 PMIC */ + i2c_send(MAX77620_I2C_ADDR, MAX77620_GPIO5_DATA); + + /* Disable PWR I2C */ + write32(clk_rst_rst_dev_h_set_ptr, I2C5_RST); + write32(clk_rst_clk_enb_h_clr_ptr, CLK_ENB_I2C5); + + /* Delay before removing clamp */ + udelay(2000); + /* * Reprogram PMC_CPUPWRGOOD_TIMER register: * @@ -571,97 +857,56 @@ static void power_on_main_cpu(void) * Save the original PMC_CPUPWRGOOD_TIMER register which we need to * restore after the CPU is powered up. */ - uint32_t orig_timer = read32(pmc_ctlr_cpupwrgood_timer_ptr); - - write32(pmc_ctlr_cpupwrgood_timer_ptr, - orig_timer * (204000000 / 32768)); + orig_timer = read32(pmc_cpupwrgood_timer_ptr); + write32(pmc_cpupwrgood_timer_ptr, orig_timer * (204000000 / 32768)); + /* Power on CRAIL in PMC */ power_on_partition(PARTID_CRAIL); + + /* Remove SW controlled clamp */ + write32(pmc_set_sw_clamp_ptr, 0); + write32(pmc_remove_clamping_cmd_ptr, (1 << PARTID_CRAIL)); + /* Wait until clamp is off. */ + while (read32(pmc_clamp_status_ptr) & (1 << PARTID_CRAIL)) + ; + + /* Disable CLDVFS clock */ + write32(clk_rst_clk_enb_w_clr_ptr, CLK_ENB_DVFS); + + /* Perform fast cluster RAM repair. */ + if (!(read32(flow_ctlr_bpmp_cluster_control_ptr) & ACTIVE_SLOW)) + ram_repair(); + + /* Power up the non-CPU partition. */ power_on_partition(PARTID_C0NC); + + /* Enable PLLP branch going to CPU */ + write32(clk_rst_clk_enb_y_set_ptr, CLK_ENB_PLLP_OUT_CPU); + udelay(2); + + /* Enable the CPU complex clocks */ + enable_select_cpu_clocks(); + udelay(10); + + /* Take non-cpu OUT of reset */ + write32(clk_rst_cpug_cmplx_clr_ptr, CLR_NONCPURESET); + + /* Power up the CPU0 partition. */ power_on_partition(PARTID_CE0); - // Restore the original PMC_CPUPWRGOOD_TIMER. - write32(pmc_ctlr_cpupwrgood_timer_ptr, orig_timer); -} + /* Restore the original PMC_CPUPWRGOOD_TIMER. */ + write32(pmc_cpupwrgood_timer_ptr, orig_timer); + /* Clear software controlled reset */ + write32(clk_rst_cpug_cmplx_clr_ptr, (CLR_CPURESET0 | CLR_CORERESET0)); -static void aarch64_trampoline(void) -{ - uint32_t val = 3; /* bit1: to warm reset; bit0: AARCH64*/ - - asm volatile ("mcr p15, 0, %0, c12, c0, 2" : : "r" (val)); - - /* unreachable */ - halt(); -} - - -/* Entry point. */ - -void lp0_resume(void) -{ - // If not on the AVP, reset. - if (read32(up_tag_ptr) != UP_TAG_AVP) - reset(); - - // Enable JTAG - enable_jtag(); - - config_oscillator(); - - // Program SUPER_CCLK_DIVIDER. - write32(clk_rst_super_cclk_div_ptr, SUPER_CDIV_ENB); - - config_core_sight(); - - enable_uart(); - - config_pllu(); - - /* - * Set the CPU reset vector. - * - * T210 always resets to AARCH32 and SW needs to write RMR_EL3 - * to bootstrap into AARCH64. - */ - write32(pmc_ctlr_secure_scratch34_ptr, get_wakeup_vector()); - write32(pmc_ctlr_secure_scratch35_ptr, 0); - write32(evp_cpu_reset_ptr, (uint32_t)aarch64_trampoline); - - // Select CPU complex clock source. - write32(clk_rst_cclk_burst_policy_ptr, CCLK_PLLP_BURST_POLICY); - - // Disable PLLX since it isn't used as CPU clock source. - clrbits32(PLLX_ENABLE, clk_rst_pllx_base_ptr); - - // Set CAR2PMC_CPU_ACK_WIDTH to 408. - uint32_t ack_width = read32(clk_rst_cpu_softrst_ctrl2_ptr); - ack_width &= ~CAR2PMC_CPU_ACK_WIDTH_MASK; - ack_width |= 408 << CAR2PMC_CPU_ACK_WIDTH_SHIFT; - write32(clk_rst_cpu_softrst_ctrl2_ptr, ack_width); - - // Disable VPR. - write32(mc_video_protect_size_mb_ptr, 0); - write32(mc_video_protect_reg_ctrl_ptr, - VIDEO_PROTECT_WRITE_ACCESS_DISABLE); - - enable_cpu_clocks(); - - power_on_main_cpu(); - - // Perform ram repair after cpu is powered on. - ram_repair(); - - clear_cpu_resets(); - - // Halt the AVP. + /* Halt the AVP. */ while (1) write32(flow_ctlr_halt_cop_events_ptr, FLOW_MODE_STOP | EVENT_JTAG); } - /* Header. */ extern uint8_t blob_data;