mainboard: Add support for ASUS P8Z77-M PRO desktop mainboard
Add support for ASUS P8Z77-M PRO desktop mainboard Working: - Tianocore and SeaBIOS boot - PS/2 keyboard and mouse - Audio - S3 Suspend, shutdown and reboot - USB2 / USB3 - Gigabit Ethernet - SATA3, SATA2 and eSATA - NVME - CPU Temp sensors - TPM - Native raminit and also MRC - PCIe GPU in all PCIe slots (16x/8x/4x) (linux) - Integrated graphics with both libgfxinit and Intel Video OpROM (all connectors VGA/DVI-D/HDMI) Signed-off-by: Vlado Cibic <vladocb@protonmail.com> Change-Id: I47d24ac8b236f929c3160f9a769b971d83710f9d Reviewed-on: https://review.coreboot.org/c/coreboot/+/33328 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Vlado Cibic
Matt DeVillier
parent
b91b173f3d
commit
2bf6a301d3
Binary file not shown.
|
After Width: | Height: | Size: 96 KiB |
|
|
@ -0,0 +1,168 @@
|
||||||
|
# ASUS P8Z77-M Pro
|
||||||
|
|
||||||
|
This page describes how to run coreboot on the [ASUS P8Z77-M Pro]
|
||||||
|
|
||||||
|
## Flashing coreboot
|
||||||
|
|
||||||
|
```eval_rst
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Type | Value |
|
||||||
|
+=====================+================+
|
||||||
|
| Socketed flash | yes |
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Model | W25Q64FVA1Q |
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Size | 8 MiB |
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Package | DIP-8 |
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Write protection | yes |
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Dual BIOS feature | no |
|
||||||
|
+---------------------+----------------+
|
||||||
|
| Internal flashing | yes |
|
||||||
|
+---------------------+----------------+
|
||||||
|
```
|
||||||
|
|
||||||
|
The flash IC is located right next to one of the SATA ports:
|
||||||
|
|
||||||
|
|
||||||
|
### Internal programming
|
||||||
|
|
||||||
|
The main SPI flash cannot be written because Asus disables BIOSWE and
|
||||||
|
enables BLE/SMM_BWP flags in BIOS_CNTL for their latest bioses.
|
||||||
|
An external programmer is required. You must flash standalone,
|
||||||
|
flashing in-circuit doesn't work. The flash chip is socketed, so it's
|
||||||
|
easy to remove and reflash.
|
||||||
|
|
||||||
|
## Working
|
||||||
|
|
||||||
|
- PS/2 keyboard with SeaBIOS & Tianocore (in Mint 18.3/19.1)
|
||||||
|
|
||||||
|
- Rear/front headphones connector audio & mic
|
||||||
|
|
||||||
|
- S3 Suspend to RAM (tested with OS installed in a HDD/SSD and also with a
|
||||||
|
Mint 18.3/19.1 LiveUSB pendrive connected to USB3/USB2), but please
|
||||||
|
see [Known issues]
|
||||||
|
|
||||||
|
- USB2 on rear (tested mouse/keyboard plugged there. Also, booting with
|
||||||
|
a Mint 18./19.1 LiveUSB works ok)
|
||||||
|
|
||||||
|
- USB3 (Z77's and Asmedia's works, but please see [Known issues])
|
||||||
|
|
||||||
|
- Gigabit Ethernet (RTL8111F)
|
||||||
|
|
||||||
|
- SATA3, SATA2 and eSATA (tested on all ports, hot-swap and TCG OPAL working)
|
||||||
|
(Blue SATA2) (Blue SATA2) (White SATA3) (Red eSATA SATA3 rear)
|
||||||
|
port 3 port 5 port 1 port 8
|
||||||
|
port 4 port 6 port 2 port 7
|
||||||
|
|
||||||
|
- NVME SSD boot on PCIe-x16/x8/4x slot using Tianocore
|
||||||
|
(tested with M.2-to-PCIe adapter and a M.2 Samsung EVO 970 SSD)
|
||||||
|
|
||||||
|
- CPU Temp sensors (tested PSensor on linux + HWINFO64 on Win10)
|
||||||
|
|
||||||
|
- TPM on TPM-header (tested tpm-tools with Asus TPM 1.2 Infineon SLB9635TT12)
|
||||||
|
|
||||||
|
- Native raminit and also MRC.bin(systemagent-r6.bin) memory initialization
|
||||||
|
(please see [Native raminit compatibility] and [MRC memory compatibility])
|
||||||
|
|
||||||
|
- Integrated graphics with both libgfxinit and the Intel Video BIOS OpROM
|
||||||
|
(VGA/DVI-D/HDMI tested and working)
|
||||||
|
|
||||||
|
- 1x PCIe GPU in PCIe-16x/8x/4x slots (tested using Zotac GeForce GTX
|
||||||
|
750Ti and FirePro W5100 under Mint 18.3/19.1)
|
||||||
|
|
||||||
|
## Known issues
|
||||||
|
|
||||||
|
- The rear's USB3s on bottom (closest to the PCB) have problems booting or
|
||||||
|
being used before the OS loads. For better compatibility, please use
|
||||||
|
the Z77's ones above the Ethernet connector or the Asmedia's top one
|
||||||
|
|
||||||
|
- After S3 suspend, some USB3 connectors on rear seem not to work
|
||||||
|
|
||||||
|
- At the moment, the power led does not blink when entering S3 state
|
||||||
|
|
||||||
|
- Currently, we have not setup the SuperIO's Hardware Monitor (HWM),
|
||||||
|
so only the CPU sensors are reported
|
||||||
|
|
||||||
|
- If you use the MRC.bin, the NVRAM variable gfx_uma_size may be ignored
|
||||||
|
as IGP's UMA could be reconfigured by the blob
|
||||||
|
|
||||||
|
- Using TianoCore + a PCIe GPU under Windows crashes with an
|
||||||
|
ACPI_BIOS_ERROR fatal code, not sure why. Using just the IGP
|
||||||
|
works perfectly
|
||||||
|
|
||||||
|
- Under Windows 10, if you experiment problems with PS/2 devices, change
|
||||||
|
HKLM\SYSTEM\CurrentControlSet\Services\i8042prt->Start from '3' to '1'
|
||||||
|
|
||||||
|
## Untested
|
||||||
|
|
||||||
|
- EHCI debugging
|
||||||
|
- S/PDIF audio
|
||||||
|
- Wake-on-LAN
|
||||||
|
- Serial port
|
||||||
|
|
||||||
|
## Not working
|
||||||
|
|
||||||
|
- PS/2 keyboard in Win10 using Tianocore (please see [Known issues])
|
||||||
|
- PS/2 mouse using Tianocore
|
||||||
|
- PCIe graphics card on Windows and Tianocore (throws critical ACPI_BIOS_ERROR)
|
||||||
|
|
||||||
|
## Native raminit compatibility
|
||||||
|
|
||||||
|
- GSkill F3-2133C10D-16GAB(XMP,1.60v) 2x8GB kit works at 1333Mhz instead
|
||||||
|
of XMP 2133Mhz
|
||||||
|
|
||||||
|
- Team Xtreem TXD38G2133HC9NDC01(XMP,1.50v) 2x4GB kit works at 1600Mhz
|
||||||
|
instead of XMP 2133Mhz
|
||||||
|
|
||||||
|
- Kingston KVR1066D3N7K2/4G(JEDEC,1.50v) 2x4GB kit works at 1066Mhz
|
||||||
|
but the board only detects half its RAM, because those DIMMs have
|
||||||
|
Double Sided(DS) chips and seems only Single Sided(SS) ones are
|
||||||
|
fully detected
|
||||||
|
|
||||||
|
- GSkill F3-10666CL9T2-24GBRL(JEDEC,1.50v) 6x4GB kit (4 DIMMs used)
|
||||||
|
works perfectly at full speed (1333Mhz)
|
||||||
|
|
||||||
|
## MRC memory compatibility
|
||||||
|
|
||||||
|
- GSkill F3-2133C10D-16GAB(XMP,1.60v) 2x8GB kit works at 1333Mhz
|
||||||
|
instead of XMP 2133Mhz
|
||||||
|
|
||||||
|
- Team Xtreem TXD38G2133HC9NDC01(XMP,1.50v) 2x4GB kit works at
|
||||||
|
1600Mhz instead of XMP 2133Mhz
|
||||||
|
|
||||||
|
- Kingston KVR1066D3N7K2/4G(JEDEC,1.50v) 2x4GB kit works at 1066Mhz
|
||||||
|
but the board only detects half its RAM, as those DIMMs have
|
||||||
|
Double Sided(DS) chips and seems only Single Sided(SS) ones are
|
||||||
|
fully detected
|
||||||
|
|
||||||
|
- GSkill F3-10666CL9T2-24GBRL(JEDEC,1.50v) 6x4GB kit (4 DIMMs used)
|
||||||
|
works perfectly at full speed (1333Mhz)
|
||||||
|
|
||||||
|
## Technology
|
||||||
|
|
||||||
|
```eval_rst
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Northbridge | :doc:`../../northbridge/intel/sandybridge/index` |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Southbridge | bd82x6x |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| CPU | model_206ax |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Super I/O | Nuvoton NCT6779D |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| EC | None |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Coprocessor | Intel Management Engine |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
```
|
||||||
|
|
||||||
|
## Extra resources
|
||||||
|
|
||||||
|
- [Flash chip datasheet][W25Q64FVA1Q]
|
||||||
|
|
||||||
|
[ASUS P8Z88-M Pro]: https://www.asus.com/Motherboards/P8Z77M_PRO/
|
||||||
|
[W25Q64FVA1Q]: https://www.winbond.com/resource-files/w25q64fv%20revs%2007182017.pdf
|
||||||
|
[flashrom]: https://flashrom.org/Flashrom
|
||||||
|
|
@ -7,6 +7,7 @@ This section contains documentation about coreboot on specific mainboards.
|
||||||
- [F2A85-M](asus/f2a85-m.md)
|
- [F2A85-M](asus/f2a85-m.md)
|
||||||
- [P8H61-M LX](asus/p8h61-m_lx.md)
|
- [P8H61-M LX](asus/p8h61-m_lx.md)
|
||||||
- [P8H61-M Pro](asus/p8h61-m_pro.md)
|
- [P8H61-M Pro](asus/p8h61-m_pro.md)
|
||||||
|
- [P8Z77-M Pro](asus/p8z77-m_pro.md)
|
||||||
|
|
||||||
## ASRock
|
## ASRock
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -364,6 +364,11 @@ M: Angel Pons <th3fanbus@gmail.com>
|
||||||
S: Maintained
|
S: Maintained
|
||||||
F: src/mainboard/asus/p8h61-m_pro/
|
F: src/mainboard/asus/p8h61-m_pro/
|
||||||
|
|
||||||
|
ASUS P8Z77-M PRO MAINBOARD
|
||||||
|
M: Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
S: Maintained
|
||||||
|
F: src/mainboard/asus/p8z77-m_pro/
|
||||||
|
|
||||||
PC ENGINES ALL MAINBOARDS
|
PC ENGINES ALL MAINBOARDS
|
||||||
M: Piotr Król <piotr.krol@3mdeb.com>
|
M: Piotr Król <piotr.krol@3mdeb.com>
|
||||||
M: Michał Żygowski <michal.zygowski@3mdeb.com>
|
M: Michał Żygowski <michal.zygowski@3mdeb.com>
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,48 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
if BOARD_ASUS_P8Z77_M_PRO
|
||||||
|
|
||||||
|
config BOARD_SPECIFIC_OPTIONS
|
||||||
|
def_bool y
|
||||||
|
select BOARD_ROMSIZE_KB_8192
|
||||||
|
select HAVE_ACPI_RESUME
|
||||||
|
select HAVE_ACPI_TABLES
|
||||||
|
select INTEL_INT15
|
||||||
|
select NORTHBRIDGE_INTEL_SANDYBRIDGE
|
||||||
|
select SERIRQ_CONTINUOUS_MODE
|
||||||
|
select SOUTHBRIDGE_INTEL_C216
|
||||||
|
select MAINBOARD_HAS_LPC_TPM
|
||||||
|
select MAINBOARD_HAS_TPM1
|
||||||
|
select HAVE_OPTION_TABLE
|
||||||
|
select HAVE_CMOS_DEFAULT
|
||||||
|
select MAINBOARD_HAS_LIBGFXINIT
|
||||||
|
select INTEL_GMA_HAVE_VBT
|
||||||
|
select SUPERIO_NUVOTON_NCT6779D
|
||||||
|
select DRIVERS_ASMEDIA_ASPM_BLACKLIST # for ASM1061 eSATA
|
||||||
|
|
||||||
|
config MAINBOARD_DIR
|
||||||
|
string
|
||||||
|
default "asus/p8z77-m_pro"
|
||||||
|
|
||||||
|
config MAINBOARD_PART_NUMBER
|
||||||
|
string
|
||||||
|
default "P8Z77-M PRO"
|
||||||
|
|
||||||
|
config MAX_CPUS
|
||||||
|
int
|
||||||
|
default 8
|
||||||
|
|
||||||
|
endif # BOARD_ASUS_P8Z77_M_PRO
|
||||||
|
|
@ -0,0 +1,17 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
config BOARD_ASUS_P8Z77_M_PRO
|
||||||
|
bool "P8Z77-M PRO"
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software: you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation, either version 2 of the License, or
|
||||||
|
## (at your option) any later version.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
romstage-y += gpio.c
|
||||||
|
|
||||||
|
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
Method(_WAK,1)
|
||||||
|
{
|
||||||
|
Return(Package(){0,0})
|
||||||
|
}
|
||||||
|
|
||||||
|
Method(_PTS,1)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,17 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <drivers/pc80/pc/ps2_controller.asl>
|
||||||
|
|
@ -0,0 +1,35 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <southbridge/intel/bd82x6x/nvs.h>
|
||||||
|
#include <option.h>
|
||||||
|
|
||||||
|
void acpi_create_gnvs(global_nvs_t *gnvs)
|
||||||
|
{
|
||||||
|
/* Turn off power for USB ports in S3 by default */
|
||||||
|
gnvs->s3u0 = 0;
|
||||||
|
gnvs->s3u1 = 0;
|
||||||
|
|
||||||
|
/* Turn off power for USB ports in S5 by default */
|
||||||
|
gnvs->s5u0 = 0;
|
||||||
|
gnvs->s5u1 = 0;
|
||||||
|
|
||||||
|
/* critical temp that will shutdown the pc == 95C degrees */
|
||||||
|
gnvs->tcrt = 95;
|
||||||
|
|
||||||
|
/* temp to start throttling the cpu == 85C */
|
||||||
|
gnvs->tpsv = 85;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
Category: desktop
|
||||||
|
Board URL: https://www.asus.com/Motherboards/P8Z77M_PRO/
|
||||||
|
ROM package: DIP-8
|
||||||
|
ROM protocol: SPI
|
||||||
|
ROM socketed: y
|
||||||
|
Flashrom support: y
|
||||||
|
Release year: 2013
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
boot_option=Fallback
|
||||||
|
debug_level=Debug
|
||||||
|
gfx_uma_size=224M
|
||||||
|
nmi=Enable
|
||||||
|
sata_mode=AHCI
|
||||||
|
#usb3_xxxx options are only used with MRC blob, ignored else
|
||||||
|
usb3_mode=Enable
|
||||||
|
usb3_drv=Enable
|
||||||
|
usb3_streams=Enable
|
||||||
|
|
@ -0,0 +1,185 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
entries
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register A
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register B
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register C
|
||||||
|
#96 4 r 0 status_c_rsvd
|
||||||
|
#100 1 r 0 uf_flag
|
||||||
|
#101 1 r 0 af_flag
|
||||||
|
#102 1 r 0 pf_flag
|
||||||
|
#103 1 r 0 irqf_flag
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Status Register D
|
||||||
|
#104 7 r 0 status_d_rsvd
|
||||||
|
#111 1 r 0 valid_cmos_ram
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Diagnostic Status Register
|
||||||
|
#112 8 r 0 diag_rsvd1
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
0 120 r 0 reserved_memory
|
||||||
|
#120 264 r 0 unused
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# RTC_BOOT_BYTE (coreboot hardcoded)
|
||||||
|
384 1 e 3 boot_option
|
||||||
|
388 4 h 0 reboot_counter
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# coreboot config options: console
|
||||||
|
#392 3 r 0 unused
|
||||||
|
395 4 e 4 debug_level
|
||||||
|
#399 1 r 0 unused
|
||||||
|
#400 8 r 0 reserved for century byte
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# coreboot config options: southbridge
|
||||||
|
|
||||||
|
# Non Maskable Interrupt(NMI) support, which is an interrupt that may
|
||||||
|
# occur on a RAM or unrecoverable error.
|
||||||
|
408 1 e 1 nmi
|
||||||
|
|
||||||
|
409 2 e 5 power_on_after_fail
|
||||||
|
411 1 e 6 sata_mode
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# coreboot config options: northbridge
|
||||||
|
|
||||||
|
# gfx_uma_size
|
||||||
|
# Quantity of shared video memory the IGP can use
|
||||||
|
#
|
||||||
|
416 5 e 7 gfx_uma_size
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# coreboot config options: usb3
|
||||||
|
|
||||||
|
# usb3_mode
|
||||||
|
# Controls how the motherboard's USB3 ports act at boot time
|
||||||
|
421 2 e 8 usb3_mode
|
||||||
|
|
||||||
|
# usb3_drv
|
||||||
|
# Load (or not) pre-OS xHCI USB3 bios driver
|
||||||
|
#
|
||||||
|
423 1 e 1 usb3_drv
|
||||||
|
|
||||||
|
# usb3_streams
|
||||||
|
# Streams can provide more speed (as they can use 64Kb packets),
|
||||||
|
# but they might cause incompatibilities with some devices.
|
||||||
|
#
|
||||||
|
424 1 e 1 usb3_streams
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# Sandy/Ivy Bridge MRC Scrambler Seed values
|
||||||
|
# note: MUST NOT be covered by checksum!
|
||||||
|
464 32 r 0 mrc_scrambler_seed
|
||||||
|
496 32 r 0 mrc_scrambler_seed_s3
|
||||||
|
528 16 r 0 mrc_scrambler_seed_chk
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# coreboot config options: check sums
|
||||||
|
544 16 h 0 check_sum
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
|
||||||
|
enumerations
|
||||||
|
#ID value text
|
||||||
|
|
||||||
|
# Generic on/off enum
|
||||||
|
1 0 Disable
|
||||||
|
1 1 Enable
|
||||||
|
|
||||||
|
# boot_option
|
||||||
|
3 0 Fallback
|
||||||
|
3 1 Normal
|
||||||
|
|
||||||
|
# debug_level
|
||||||
|
4 0 Emergency
|
||||||
|
4 1 Alert
|
||||||
|
4 2 Critical
|
||||||
|
4 3 Error
|
||||||
|
4 4 Warning
|
||||||
|
4 5 Notice
|
||||||
|
4 6 Info
|
||||||
|
4 7 Debug
|
||||||
|
4 8 Spew
|
||||||
|
|
||||||
|
# power_on_after_fail
|
||||||
|
5 0 Disable
|
||||||
|
5 1 Enable
|
||||||
|
5 2 Keep
|
||||||
|
|
||||||
|
# sata_mode
|
||||||
|
6 0 AHCI
|
||||||
|
6 1 Compatible
|
||||||
|
|
||||||
|
# gfx_uma_size (Intel IGP Video RAM size)
|
||||||
|
7 0 32M
|
||||||
|
7 1 64M
|
||||||
|
7 2 96M
|
||||||
|
7 3 128M
|
||||||
|
7 4 160M
|
||||||
|
7 5 192M
|
||||||
|
7 6 224M
|
||||||
|
7 7 256M
|
||||||
|
7 8 288M
|
||||||
|
7 9 320M
|
||||||
|
7 10 352M
|
||||||
|
7 11 384M
|
||||||
|
7 12 416M
|
||||||
|
7 13 448M
|
||||||
|
7 14 480M
|
||||||
|
7 15 512M
|
||||||
|
7 16 544M
|
||||||
|
7 17 576M
|
||||||
|
7 18 608M
|
||||||
|
7 19 640M
|
||||||
|
7 20 672M
|
||||||
|
7 21 704M
|
||||||
|
7 22 736M
|
||||||
|
7 23 768M
|
||||||
|
7 24 800M
|
||||||
|
7 25 832M
|
||||||
|
7 26 864M
|
||||||
|
7 27 896M
|
||||||
|
7 28 928M
|
||||||
|
7 29 960M
|
||||||
|
7 30 992M
|
||||||
|
|
||||||
|
# usb3_mode
|
||||||
|
# Disable = Use the port always as USB 2.0 for compatibility
|
||||||
|
# Enable = Use the port always as USB 3.0 for speed
|
||||||
|
# Auto = Initialize the port as USB 2.0, until the OS loads
|
||||||
|
# xHCI USB 3.0 driver
|
||||||
|
# SmartAuto = Same as Auto but, if the OS loads the xHCI USB 3.0 driver
|
||||||
|
# and the computer is reset, keep the USB 3.0 mode.
|
||||||
|
#
|
||||||
|
8 0 Disable
|
||||||
|
8 1 Enable
|
||||||
|
8 2 Auto
|
||||||
|
8 3 SmartAuto
|
||||||
|
|
||||||
|
# -----------------------------------------------------------------
|
||||||
|
# <startBit[must be byte-aligned]> <endBit[must be byte aligned]>
|
||||||
|
# <bit where to start storing checksum[must be 16bits-aligned]>
|
||||||
|
checksums
|
||||||
|
|
||||||
|
checksum 392 431 544
|
||||||
Binary file not shown.
|
|
@ -0,0 +1,109 @@
|
||||||
|
##
|
||||||
|
## This file is part of the coreboot project.
|
||||||
|
##
|
||||||
|
## Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
##
|
||||||
|
## This program is free software; you can redistribute it and/or modify
|
||||||
|
## it under the terms of the GNU General Public License as published by
|
||||||
|
## the Free Software Foundation; version 2 of the License.
|
||||||
|
##
|
||||||
|
## This program is distributed in the hope that it will be useful,
|
||||||
|
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
## GNU General Public License for more details.
|
||||||
|
##
|
||||||
|
|
||||||
|
chip northbridge/intel/sandybridge
|
||||||
|
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410 }"
|
||||||
|
register "gfx.ndid" = "3"
|
||||||
|
device cpu_cluster 0x0 on
|
||||||
|
chip cpu/intel/model_206ax
|
||||||
|
register "c1_acpower" = "1"
|
||||||
|
register "c1_battery" = "1"
|
||||||
|
register "c2_acpower" = "3"
|
||||||
|
register "c2_battery" = "3"
|
||||||
|
register "c3_acpower" = "5"
|
||||||
|
register "c3_battery" = "5"
|
||||||
|
device lapic 0x0 on end
|
||||||
|
device lapic 0xacac off end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device domain 0x0 on
|
||||||
|
subsystemid 0x1043 0x84ca inherit
|
||||||
|
device pci 00.0 on end # Host bridge
|
||||||
|
device pci 01.0 on end # PCIe Bridge for discrete graphics
|
||||||
|
device pci 02.0 on end # Internal graphics VGA controller
|
||||||
|
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
|
||||||
|
register "c2_latency" = "0x0065"
|
||||||
|
register "gen1_dec" = "0x000c0291"
|
||||||
|
register "gen4_dec" = "0x0000ff29"
|
||||||
|
register "pcie_port_coalesce" = "1"
|
||||||
|
register "sata_interface_speed_support" = "0x3" # 0x3=SATAIII
|
||||||
|
register "sata_port_map" = "0x3f" # Enable the six SATA ports
|
||||||
|
register "spi_lvscc" = "0x2005"
|
||||||
|
register "spi_uvscc" = "0x2005"
|
||||||
|
register "superspeed_capable_ports" = "0x0000000f"
|
||||||
|
register "xhci_overcurrent_mapping" = "0x00000c03"
|
||||||
|
register "xhci_switchable_ports" = "0x0000000f" # the 4 ports
|
||||||
|
device pci 14.0 on end # USB 3.0 Controller
|
||||||
|
device pci 16.0 on end # Management Engine Interface 1
|
||||||
|
device pci 16.1 off end # Management Engine Interface 2
|
||||||
|
device pci 16.2 off end # Management Engine IDE-R
|
||||||
|
device pci 16.3 off end # Management Engine KT
|
||||||
|
device pci 19.0 off end # Intel Gigabit Ethernet
|
||||||
|
device pci 1a.0 on end # USB2 EHCI 2
|
||||||
|
device pci 1b.0 on end # High Definition Audio controller
|
||||||
|
device pci 1c.0 on end # PCIe Root Port 1 PCIEX_16_3
|
||||||
|
device pci 1c.1 on end # PCIe Root Port 6 RTL8111F
|
||||||
|
device pci 1c.2 off end # PCIe Port 3 unused
|
||||||
|
device pci 1c.3 off end # PCIe Port 4 unused
|
||||||
|
device pci 1c.4 off end # PCIe Port 5 unused
|
||||||
|
device pci 1c.5 on end # PCIe Root Port 7 ASM1042 USB3
|
||||||
|
device pci 1c.6 on end # PCIe Root Port 8 ASM1061 eSATA
|
||||||
|
device pci 1c.7 off end # PCIe Port 8 unused
|
||||||
|
device pci 1d.0 on end # USB2 EHCI 1
|
||||||
|
device pci 1e.0 off end # PCI bridge
|
||||||
|
device pci 1f.0 on # LPC bridge
|
||||||
|
chip superio/nuvoton/nct6779d
|
||||||
|
device pnp 2e.1 off end # Parallel
|
||||||
|
device pnp 2e.2 off end # UART A
|
||||||
|
device pnp 2e.3 on # UART B, IR
|
||||||
|
io 0x60 = 0x2f8 # COM2 address
|
||||||
|
end
|
||||||
|
device pnp 2e.5 on # PS2 KBC
|
||||||
|
io 0x60 = 0x0060 # KBC1 base
|
||||||
|
io 0x62 = 0x0064 # KBC2 base
|
||||||
|
irq 0x70 = 1 # Keyboard IRQ
|
||||||
|
irq 0x72 = 12 # Mouse IRQ
|
||||||
|
|
||||||
|
# KBC 12Mhz/A20 speed/sw KBRST
|
||||||
|
drq 0xf0 = 0x82
|
||||||
|
end
|
||||||
|
device pnp 2e.6 off end # CIR
|
||||||
|
device pnp 2e.7 on end # GPIOs 6-8
|
||||||
|
device pnp 2e.8 off end # WDT1 GPIO 0-1
|
||||||
|
device pnp 2e.9 off end # GPIO 1-8
|
||||||
|
device pnp 2e.a on # ACPI
|
||||||
|
drq 0xe4 = 0x10 # Enable 3VSBS to power RAM on S3
|
||||||
|
drq 0xe7 = 0x10 # 0.5s S3 delay for compatibility
|
||||||
|
end
|
||||||
|
device pnp 2e.b off end # HWM, LED
|
||||||
|
device pnp 2e.d off end # WDT1
|
||||||
|
device pnp 2e.e off end # CIR wake-up
|
||||||
|
device pnp 2e.f on # GPIO PP/OD
|
||||||
|
drq 0xe6 = 0x7f # GP7 PP
|
||||||
|
end
|
||||||
|
device pnp 2e.14 on end # Port 80 UART
|
||||||
|
device pnp 2e.16 off end # Deep sleep
|
||||||
|
end
|
||||||
|
chip drivers/pc80/tpm
|
||||||
|
device pnp 4e.0 on end # TPM module
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1f.2 on end # SATA Controller 1
|
||||||
|
device pci 1f.3 on end # SMBus
|
||||||
|
device pci 1f.5 off end # SATA Controller 2
|
||||||
|
device pci 1f.6 off end # Thermal
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,43 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define ACPI_VIDEO_DEVICE \_SB.PCI0.GFX0
|
||||||
|
|
||||||
|
#include <arch/acpi.h>
|
||||||
|
DefinitionBlock(
|
||||||
|
"dsdt.aml",
|
||||||
|
"DSDT",
|
||||||
|
0x02, /* DSDT revision: ACPI 2.0 and up */
|
||||||
|
OEM_ID,
|
||||||
|
ACPI_TABLE_CREATOR,
|
||||||
|
0x20141018 /* OEM revision */
|
||||||
|
)
|
||||||
|
{
|
||||||
|
#include "acpi/platform.asl"
|
||||||
|
#include "acpi/superio.asl"
|
||||||
|
#include <cpu/intel/common/acpi/cpu.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/platform.asl>
|
||||||
|
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/sleepstates.asl>
|
||||||
|
|
||||||
|
Device (\_SB.PCI0)
|
||||||
|
{
|
||||||
|
#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
|
||||||
|
#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/pch.asl>
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,31 @@
|
||||||
|
--
|
||||||
|
-- This file is part of the coreboot project.
|
||||||
|
--
|
||||||
|
-- Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
--
|
||||||
|
-- This program is free software: you can redistribute it and/or modify
|
||||||
|
-- it under the terms of the GNU General Public License as published by
|
||||||
|
-- the Free Software Foundation, either version 2 of the License, or
|
||||||
|
-- (at your option) any later version.
|
||||||
|
--
|
||||||
|
-- This program is distributed in the hope that it will be useful,
|
||||||
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
-- GNU General Public License for more details.
|
||||||
|
--
|
||||||
|
|
||||||
|
with HW.GFX.GMA;
|
||||||
|
with HW.GFX.GMA.Display_Probing;
|
||||||
|
|
||||||
|
use HW.GFX.GMA;
|
||||||
|
use HW.GFX.GMA.Display_Probing;
|
||||||
|
|
||||||
|
private package GMA.Mainboard is
|
||||||
|
|
||||||
|
ports : constant Port_List :=
|
||||||
|
(HDMI1, -- DVI-D port on rear
|
||||||
|
HDMI3, -- real HDMI port on rear
|
||||||
|
Analog, -- VGA port on rear
|
||||||
|
others => Disabled);
|
||||||
|
|
||||||
|
end GMA.Mainboard;
|
||||||
|
|
@ -0,0 +1,198 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <southbridge/intel/common/gpio.h>
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
|
||||||
|
.gpio0 = GPIO_MODE_GPIO,
|
||||||
|
.gpio1 = GPIO_MODE_GPIO,
|
||||||
|
.gpio2 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio3 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio4 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio5 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio6 = GPIO_MODE_GPIO,
|
||||||
|
.gpio7 = GPIO_MODE_GPIO,
|
||||||
|
.gpio8 = GPIO_MODE_GPIO,
|
||||||
|
.gpio9 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio10 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio11 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio12 = GPIO_MODE_GPIO,
|
||||||
|
.gpio13 = GPIO_MODE_GPIO,
|
||||||
|
.gpio14 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio15 = GPIO_MODE_GPIO,
|
||||||
|
.gpio16 = GPIO_MODE_GPIO,
|
||||||
|
.gpio17 = GPIO_MODE_GPIO,
|
||||||
|
.gpio18 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio19 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio20 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio21 = GPIO_MODE_GPIO,
|
||||||
|
.gpio22 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio23 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio24 = GPIO_MODE_GPIO,
|
||||||
|
.gpio25 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio26 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio27 = GPIO_MODE_GPIO,
|
||||||
|
.gpio28 = GPIO_MODE_GPIO,
|
||||||
|
.gpio29 = GPIO_MODE_GPIO,
|
||||||
|
.gpio30 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio31 = GPIO_MODE_GPIO,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
|
||||||
|
.gpio0 = GPIO_DIR_INPUT,
|
||||||
|
.gpio1 = GPIO_DIR_INPUT,
|
||||||
|
.gpio6 = GPIO_DIR_INPUT,
|
||||||
|
.gpio7 = GPIO_DIR_INPUT,
|
||||||
|
.gpio8 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio12 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio13 = GPIO_DIR_INPUT,
|
||||||
|
.gpio15 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio16 = GPIO_DIR_INPUT,
|
||||||
|
.gpio17 = GPIO_DIR_INPUT,
|
||||||
|
.gpio21 = GPIO_DIR_INPUT,
|
||||||
|
.gpio24 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio27 = GPIO_DIR_INPUT,
|
||||||
|
.gpio28 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio29 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio31 = GPIO_DIR_OUTPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_level = {
|
||||||
|
.gpio8 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio12 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio15 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio24 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio28 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio29 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio31 = GPIO_LEVEL_HIGH,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
|
||||||
|
.gpio1 = GPIO_INVERT,
|
||||||
|
.gpio13 = GPIO_INVERT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
|
||||||
|
.gpio32 = GPIO_MODE_GPIO,
|
||||||
|
.gpio33 = GPIO_MODE_GPIO,
|
||||||
|
.gpio34 = GPIO_MODE_GPIO,
|
||||||
|
.gpio35 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio36 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio37 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio38 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio39 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio40 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio41 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio42 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio43 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio44 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio45 = GPIO_MODE_GPIO,
|
||||||
|
.gpio46 = GPIO_MODE_GPIO,
|
||||||
|
.gpio47 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio48 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio49 = GPIO_MODE_GPIO,
|
||||||
|
.gpio50 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio51 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio52 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio53 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio54 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio55 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio56 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio57 = GPIO_MODE_GPIO,
|
||||||
|
.gpio58 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio59 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio60 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio61 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio62 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio63 = GPIO_MODE_NATIVE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
|
||||||
|
.gpio32 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio33 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio34 = GPIO_DIR_INPUT,
|
||||||
|
.gpio45 = GPIO_DIR_INPUT,
|
||||||
|
.gpio46 = GPIO_DIR_INPUT,
|
||||||
|
.gpio49 = GPIO_DIR_INPUT,
|
||||||
|
.gpio57 = GPIO_DIR_OUTPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_level = {
|
||||||
|
.gpio32 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio33 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio57 = GPIO_LEVEL_LOW,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
|
||||||
|
.gpio64 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio65 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio66 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio67 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio68 = GPIO_MODE_GPIO,
|
||||||
|
.gpio69 = GPIO_MODE_GPIO,
|
||||||
|
.gpio70 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio71 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio72 = GPIO_MODE_GPIO,
|
||||||
|
.gpio73 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio74 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio75 = GPIO_MODE_NATIVE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
|
||||||
|
.gpio68 = GPIO_DIR_INPUT,
|
||||||
|
.gpio69 = GPIO_DIR_INPUT,
|
||||||
|
.gpio72 = GPIO_DIR_INPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_level = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
const struct pch_gpio_map mainboard_gpio_map = {
|
||||||
|
.set1 = {
|
||||||
|
.mode = &pch_gpio_set1_mode,
|
||||||
|
.direction = &pch_gpio_set1_direction,
|
||||||
|
.level = &pch_gpio_set1_level,
|
||||||
|
.blink = &pch_gpio_set1_blink,
|
||||||
|
.invert = &pch_gpio_set1_invert,
|
||||||
|
.reset = &pch_gpio_set1_reset,
|
||||||
|
},
|
||||||
|
.set2 = {
|
||||||
|
.mode = &pch_gpio_set2_mode,
|
||||||
|
.direction = &pch_gpio_set2_direction,
|
||||||
|
.level = &pch_gpio_set2_level,
|
||||||
|
.reset = &pch_gpio_set2_reset,
|
||||||
|
},
|
||||||
|
.set3 = {
|
||||||
|
.mode = &pch_gpio_set3_mode,
|
||||||
|
.direction = &pch_gpio_set3_direction,
|
||||||
|
.level = &pch_gpio_set3_level,
|
||||||
|
.reset = &pch_gpio_set3_reset,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,57 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/azalia_device.h>
|
||||||
|
|
||||||
|
const u32 cim_verb_data[] = {
|
||||||
|
0x10ec0892, /* Codec Vendor / Device ID: Realtek */
|
||||||
|
0x10438436, /* Subsystem ID */
|
||||||
|
|
||||||
|
0x0000000f, /* Number of 4 dword sets */
|
||||||
|
/* Subsystem ID */
|
||||||
|
AZALIA_SUBVENDOR(0x0, 0x10438436),
|
||||||
|
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x11, 0x99430140),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x12, 0x411111f0),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x14, 0x01014010),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x15, 0x01011012),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x16, 0x01016011),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x17, 0x01012014),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x18, 0x01a19850),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x19, 0x02a19c60),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x1a, 0x0181305f),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x1b, 0x02214c20),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x1c, 0x411111f0),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x1d, 0x4005e601),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x1e, 0x01456130),
|
||||||
|
AZALIA_PIN_CFG(0x0, 0x1f, 0x411111f0),
|
||||||
|
0x80862806, /* Codec Vendor / Device ID: Intel */
|
||||||
|
0x80860101, /* Subsystem ID */
|
||||||
|
|
||||||
|
0x00000004, /* Number of 4 dword sets */
|
||||||
|
/* Subsystem ID */
|
||||||
|
AZALIA_SUBVENDOR(0x3, 0x80860101),
|
||||||
|
|
||||||
|
AZALIA_PIN_CFG(0x3, 0x05, 0x58560010),
|
||||||
|
AZALIA_PIN_CFG(0x3, 0x06, 0x58560020),
|
||||||
|
AZALIA_PIN_CFG(0x3, 0x07, 0x18560030),
|
||||||
|
};
|
||||||
|
|
||||||
|
const u32 pc_beep_verbs[0] = {};
|
||||||
|
|
||||||
|
AZALIA_ARRAY_SIZES;
|
||||||
|
|
@ -0,0 +1,30 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <drivers/intel/gma/int15.h>
|
||||||
|
|
||||||
|
static void mainboard_enable(struct device *dev)
|
||||||
|
{
|
||||||
|
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_NONE,
|
||||||
|
GMA_INT15_PANEL_FIT_DEFAULT,
|
||||||
|
GMA_INT15_BOOT_DISPLAY_DEFAULT,
|
||||||
|
0);
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations mainboard_ops = {
|
||||||
|
.enable_dev = mainboard_enable
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,193 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2019 Vlado Cibic <vladocb@protonmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
#include <device/pci_ops.h>
|
||||||
|
#include <device/pnp_ops.h>
|
||||||
|
#include <northbridge/intel/sandybridge/sandybridge.h>
|
||||||
|
#include <southbridge/intel/bd82x6x/pch.h>
|
||||||
|
|
||||||
|
#include <superio/nuvoton/common/nuvoton.h>
|
||||||
|
#include <superio/nuvoton/nct6779d/nct6779d.h>
|
||||||
|
|
||||||
|
#include <option.h>
|
||||||
|
|
||||||
|
#include <northbridge/intel/sandybridge/raminit_native.h>
|
||||||
|
#include <northbridge/intel/sandybridge/raminit.h>
|
||||||
|
#include <northbridge/intel/sandybridge/pei_data.h>
|
||||||
|
|
||||||
|
#define GLOBAL_DEV PNP_DEV(0x2e, 0)
|
||||||
|
#define SERIAL_DEV PNP_DEV(0x2e, NCT6779D_SP2)
|
||||||
|
|
||||||
|
void pch_enable_lpc(void)
|
||||||
|
{
|
||||||
|
pci_write_config16(PCH_LPC_DEV, LPC_EN,
|
||||||
|
CNF1_LPC_EN | CNF2_LPC_EN |
|
||||||
|
KBC_LPC_EN | COMB_LPC_EN);
|
||||||
|
|
||||||
|
/* Set COMB/COM2 IO range to 2F8h-2FFh */
|
||||||
|
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x10);
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_rcba_config(void)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
const struct southbridge_usb_port mainboard_usb_ports[] = {
|
||||||
|
/* {enable, current, oc_pin} */
|
||||||
|
{ 1, 2, 0 }, /* Port 0: USB3 front internal header, top */
|
||||||
|
{ 1, 2, 0 }, /* Port 1: USB3 front internal header, bottom */
|
||||||
|
{ 1, 2, 1 }, /* Port 2: USB3 rear, ETH top */
|
||||||
|
{ 1, 2, 1 }, /* Port 3: USB3 rear, ETH bottom */
|
||||||
|
{ 1, 2, 2 }, /* Port 4: USB2 rear, PS2 top */
|
||||||
|
{ 1, 2, 2 }, /* Port 5: USB2 rear, PS2 bottom */
|
||||||
|
{ 1, 2, 3 }, /* Port 6: USB2 internal header USB78, top */
|
||||||
|
{ 1, 2, 3 }, /* Port 7: USB2 internal header USB78, bottom */
|
||||||
|
{ 1, 2, 4 }, /* Port 8: USB2 internal header USB910, top */
|
||||||
|
{ 1, 2, 4 }, /* Port 9: USB2 internal header USB910, bottom */
|
||||||
|
{ 1, 2, 6 }, /* Port 10: USB2 internal header USB1112, top */
|
||||||
|
{ 1, 2, 5 }, /* Port 11: USB2 internal header USB1112, bottom */
|
||||||
|
{ 0, 2, 5 }, /* Port 12: Unused. Asus propietary DEBUG_PORT ??? */
|
||||||
|
{ 0, 2, 6 } /* Port 13: Unused. Asus propietary DEBUG_PORT ??? */
|
||||||
|
};
|
||||||
|
|
||||||
|
void mainboard_early_init(int s3resume)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_config_superio(void)
|
||||||
|
{
|
||||||
|
/* Setup COM/UART */
|
||||||
|
nuvoton_pnp_enter_conf_state(GLOBAL_DEV);
|
||||||
|
|
||||||
|
/* TODO / FIXME: Setup Multifuncion/SIO pins for COM */
|
||||||
|
|
||||||
|
pnp_set_logical_device(SERIAL_DEV);
|
||||||
|
nuvoton_pnp_exit_conf_state(GLOBAL_DEV);
|
||||||
|
nuvoton_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
|
||||||
|
{
|
||||||
|
read_spd(&spd[0], 0x50, id_only);
|
||||||
|
read_spd(&spd[1], 0x51, id_only);
|
||||||
|
read_spd(&spd[2], 0x52, id_only);
|
||||||
|
read_spd(&spd[3], 0x53, id_only);
|
||||||
|
}
|
||||||
|
|
||||||
|
int mainboard_should_reset_usb(int s3resume)
|
||||||
|
{
|
||||||
|
return !s3resume;
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_fill_pei_data(struct pei_data *pei_data)
|
||||||
|
{
|
||||||
|
/*
|
||||||
|
* USB3 mode:
|
||||||
|
* 0 = Disable: work always as USB 2.0(ehci)
|
||||||
|
* 1 = Enable: work always as USB 3.0(xhci)
|
||||||
|
* 2 = Auto: work as USB2.0(ehci) until OS loads USB3 xhci driver
|
||||||
|
* 3 = Smart Auto : same than Auto, but if OS loads USB3 driver
|
||||||
|
* and reboots, it will keep the USB3.0 speed
|
||||||
|
*/
|
||||||
|
int usb3_mode = 1;
|
||||||
|
get_option(&usb3_mode, "usb3_mode");
|
||||||
|
usb3_mode &= 0x3; /* ensure it's 0/1/2/3 only */
|
||||||
|
|
||||||
|
/* Load USB3 pre-OS xHCI driver */
|
||||||
|
int usb3_drv = 1;
|
||||||
|
get_option(&usb3_drv, "usb3_drv");
|
||||||
|
usb3_drv &= 0x1; /* ensure it's 0/1 only */
|
||||||
|
|
||||||
|
/* Use USB3 xHCI streams */
|
||||||
|
int usb3_streams = 1;
|
||||||
|
get_option(&usb3_streams, "usb3_streams");
|
||||||
|
usb3_streams &= 0x1; /* ensure it's 0/1 only */
|
||||||
|
|
||||||
|
struct pei_data pd = {
|
||||||
|
.pei_version = PEI_VERSION,
|
||||||
|
.mchbar = (uintptr_t)DEFAULT_MCHBAR,
|
||||||
|
.dmibar = (uintptr_t)DEFAULT_DMIBAR,
|
||||||
|
.epbar = DEFAULT_EPBAR,
|
||||||
|
.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
|
||||||
|
.smbusbar = SMBUS_IO_BASE,
|
||||||
|
.wdbbar = 0x4000000,
|
||||||
|
.wdbsize = 0x1000,
|
||||||
|
.hpet_address = CONFIG_HPET_ADDRESS,
|
||||||
|
.rcba = (uintptr_t)DEFAULT_RCBABASE,
|
||||||
|
.pmbase = DEFAULT_PMBASE,
|
||||||
|
.gpiobase = DEFAULT_GPIOBASE,
|
||||||
|
.thermalbase = 0xfed08000,
|
||||||
|
.system_type = 1, /* 0=Mobile, 1=Desktop/Server */
|
||||||
|
.tseg_size = CONFIG_SMM_TSEG_SIZE,
|
||||||
|
.spd_addresses = { 0xa0, 0xa2, 0xa4, 0xa6 }, /* SMBus mul 2 */
|
||||||
|
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
|
||||||
|
.ec_present = 0, /* Asus 2203 bios shows XUECA016, but no EC */
|
||||||
|
.gbe_enable = 0, /* Board uses no Intel GbE but a RTL8111F */
|
||||||
|
.dimm_channel0_disabled = 0, /* Both DIMM enabled */
|
||||||
|
.dimm_channel1_disabled = 0, /* Both DIMM enabled */
|
||||||
|
.max_ddr3_freq = 1600, /* 1333=Sandy; 1600=Ivy */
|
||||||
|
.usb_port_config = {
|
||||||
|
/* {enabled, oc_pin, cable len 0x0080=<8inches/20cm} */
|
||||||
|
{ 1, 0, 0x0080 }, /* USB3 front internal header */
|
||||||
|
{ 1, 0, 0x0080 }, /* USB3 front internal header */
|
||||||
|
{ 1, 1, 0x0080 }, /* USB3 ETH top connector */
|
||||||
|
{ 1, 1, 0x0080 }, /* USB3 ETH botton connector */
|
||||||
|
{ 1, 2, 0x0080 }, /* USB2 PS2 top connector */
|
||||||
|
{ 1, 2, 0x0080 }, /* USB2 PS2 botton connector */
|
||||||
|
{ 1, 3, 0x0080 }, /* USB2 internal header (USB78) */
|
||||||
|
{ 1, 3, 0x0080 }, /* USB2 internal header (USB78) */
|
||||||
|
{ 1, 4, 0x0080 }, /* USB2 internal header (USB910) */
|
||||||
|
{ 1, 4, 0x0080 }, /* USB2 internal header (USB910) */
|
||||||
|
{ 1, 6, 0x0080 }, /* USB2 internal header (USB1112) */
|
||||||
|
{ 1, 5, 0x0080 }, /* USB2 internal header (USB1112) */
|
||||||
|
{ 0, 5, 0x0080 }, /* Unused. Asus DEBUG_PORT ??? */
|
||||||
|
{ 0, 6, 0x0080 } /* Unused. Asus DEBUG_PORT ??? */
|
||||||
|
},
|
||||||
|
.usb3 = {
|
||||||
|
/* 0=Disable; 1=Enable (start at USB3 speed)
|
||||||
|
* 2=Auto (start as USB2 speed until OS loads)
|
||||||
|
* 3=Smart Auto (like Auto but keep speed on reboot)
|
||||||
|
*/
|
||||||
|
usb3_mode,
|
||||||
|
/* 4 bit switch mask. 0=not switchable, 1=switchable
|
||||||
|
* Means once it's loaded the OS, it can swap ports
|
||||||
|
* from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf
|
||||||
|
*/
|
||||||
|
0xf,
|
||||||
|
usb3_drv, /* 1=Load xHCI pre-OS drv */
|
||||||
|
/* 0=Don't use xHCI streams for better compatibility
|
||||||
|
* 1=use xHCI streams for better speed
|
||||||
|
*/
|
||||||
|
usb3_streams
|
||||||
|
},
|
||||||
|
/* ASUS P8Z77-M Pro manual says 1.35v DIMMs are supported */
|
||||||
|
.ddr3lv_support = 1,
|
||||||
|
/* PCIe 3.0 support. As we use Ivy Bridge, let's enable it,
|
||||||
|
* but might cause some system inestability !
|
||||||
|
*/
|
||||||
|
.pcie_init = 1,
|
||||||
|
/* Command Rate. 0=Auto; 1=1N; 2=2N.
|
||||||
|
* Leave it always at Auto for compatibility & stability
|
||||||
|
*/
|
||||||
|
.nmode = 0,
|
||||||
|
/* DDR refresh rate. 0=Auto based on DRAM's temperature;
|
||||||
|
* 1=Normal rate for speed; 2=Double rate for stability
|
||||||
|
*/
|
||||||
|
.ddr_refresh_rate_config = 0
|
||||||
|
};
|
||||||
|
|
||||||
|
/* copy the data to output PEI */
|
||||||
|
*pei_data = pd;
|
||||||
|
}
|
||||||
Loading…
Reference in New Issue