soc/intel/common/block/cse: Move me_read_config32() to common code

me_read_config32() is defined in multiple places, move it to common
location. Also, this function is usually used for reading HFSTS
registers, hence move the HFSTS register definitions to common location.

Also add a funtion to check if the CSE device has been enabled in the
devicetree and it is visible on the bus. This API can be used by
the caller to check before initiating any HECI communication.

TEST=Verified reading HFSTS registers on CML RVP & Hatch board

Change-Id: Icdbfb6b30a007d469b5e018a313c14586addb130
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35225
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Sridhar Siricilla 2019-08-31 11:20:34 +05:30 committed by Subrata Banik
parent 910490f3f4
commit 2cc66916e5
6 changed files with 63 additions and 31 deletions

View File

@ -28,12 +28,6 @@
#include <device/pci_ops.h>
#include <stdint.h>
#define PCI_ME_HFSTS1 0x40
#define PCI_ME_HFSTS2 0x48
#define PCI_ME_HFSTS3 0x60
#define PCI_ME_HFSTS4 0x64
#define PCI_ME_HFSTS5 0x68
#define PCI_ME_HFSTS6 0x6c
#define MKHI_GROUP_ID_MCA 0x0a
#define READ_FILE 0x02
@ -188,7 +182,9 @@ static void fpf_blown(void *unused)
static uint32_t dump_status(int index, int reg_addr)
{
uint32_t reg = pci_read_config32(PCH_DEV_CSE, reg_addr);
uint32_t reg;
reg = me_read_config32(reg_addr);
printk(BIOS_DEBUG, "CSE FWSTS%d: 0x%08x\n", index, reg);
@ -256,6 +252,9 @@ static void dump_cse_state(void)
{
uint32_t fwsts1;
if (!is_cse_enabled())
return;
fwsts1 = dump_status(1, PCI_ME_HFSTS1);
dump_status(2, PCI_ME_HFSTS2);
dump_status(3, PCI_ME_HFSTS3);

View File

@ -32,16 +32,6 @@ enum {
ME_WSTATE_NORMAL = 0x05,
};
/* HFSTS register offsets in PCI config space */
enum {
PCI_ME_HFSTS1 = 0x40,
PCI_ME_HFSTS2 = 0x48,
PCI_ME_HFSTS3 = 0x60,
PCI_ME_HFSTS4 = 0x64,
PCI_ME_HFSTS5 = 0x68,
PCI_ME_HFSTS6 = 0x6C,
};
/* Host Firmware Status Register 1 */
union hfsts1 {
uint32_t raw;
@ -155,11 +145,6 @@ union hfsts6 {
} __packed fields;
};
static uint32_t me_read_config32(int offset)
{
return pci_read_config32(PCH_DEV_CSE, offset);
}
/*
* From reading the documentation, this should work for both WHL and CML
* platforms. Also, calling this function from dump_me_status() does not
@ -201,6 +186,9 @@ static void print_me_version(void *unused)
if (!CONFIG(CONSOLE_SERIAL))
return;
if (!is_cse_enabled())
return;
hfsts1.raw = me_read_config32(PCI_ME_HFSTS1);
/*
@ -244,6 +232,9 @@ void dump_me_status(void *unused)
union hfsts5 hfsts5;
union hfsts6 hfsts6;
if (!is_cse_enabled())
return;
hfsts1.raw = me_read_config32(PCI_ME_HFSTS1);
hfsts2.raw = me_read_config32(PCI_ME_HFSTS2);
hfsts3.raw = me_read_config32(PCI_ME_HFSTS3);

View File

@ -503,6 +503,28 @@ int heci_reset(void)
return 0;
}
bool is_cse_enabled(void)
{
const struct device *cse_dev = pcidev_path_on_root(PCH_DEVFN_CSE);
if (!cse_dev || !cse_dev->enabled) {
printk(BIOS_WARNING, "HECI: No CSE device\n");
return false;
}
if (pci_read_config16(PCH_DEV_CSE, PCI_VENDOR_ID) == 0xFFFF) {
printk(BIOS_WARNING, "HECI: CSE device is hidden\n");
return false;
}
return true;
}
uint32_t me_read_config32(int offset)
{
return pci_read_config32(PCH_DEV_CSE, offset);
}
#if ENV_RAMSTAGE
static void update_sec_bar(struct device *dev)

View File

@ -19,6 +19,16 @@
#include <stdint.h>
/* HFSTS register offsets in PCI config space */
enum {
PCI_ME_HFSTS1 = 0x40,
PCI_ME_HFSTS2 = 0x48,
PCI_ME_HFSTS3 = 0x60,
PCI_ME_HFSTS4 = 0x64,
PCI_ME_HFSTS5 = 0x68,
PCI_ME_HFSTS6 = 0x6C,
};
/* set up device for use in early boot enviroument with temp bar */
void heci_init(uintptr_t bar);
/*
@ -52,6 +62,16 @@ int heci_send_receive(const void *snd_msg, size_t snd_sz, void *rcv_msg, size_t
*/
int heci_reset(void);
/* Reads config value from a specified offset in the CSE PCI Config space. */
uint32_t me_read_config32(int offset);
/*
* Check if the CSE device is enabled in device tree. Also check if the device
* is visible on the PCI bus by reading config space.
* Return true if device present and config space enabled, else return false.
*/
bool is_cse_enabled(void);
#define BIOS_HOST_ADDR 0x00
#define HECI_MKHI_ADDR 0x07

View File

@ -21,7 +21,6 @@
/*
* Management Engine PCI registers
*/
#define PCI_ME_HFSTS1 0x40
#define ME_HFS_CWS_RESET 0
#define ME_HFS_CWS_INIT 1
#define ME_HFS_CWS_REC 2
@ -169,7 +168,6 @@ union me_hfs2 {
} __packed fields;
};
#define PCI_ME_HFSTS3 0x60
#define ME_HFS3_FW_SKU_CONSUMER 0x2
#define ME_HFS3_FW_SKU_CORPORATE 0x3
@ -186,9 +184,6 @@ union me_hfs3 {
} __packed fields;
};
#define PCI_ME_HFSTS4 0x64
#define PCI_ME_HFSTS5 0x68
#define PCI_ME_HFSTS6 0x6c
#define ME_HFS6_FPF_NOT_COMMITTED 0x0
#define ME_HFS6_FPF_ERROR 0x2

View File

@ -26,10 +26,6 @@
#include <stdlib.h>
#include <string.h>
static inline u32 me_read_config32(int offset)
{
return pci_read_config32(PCH_DEV_CSE, offset);
}
/* HFSTS1[3:0] Current Working State Values */
static const char *const me_cws_values[] = {
@ -242,6 +238,9 @@ static void print_me_version(void *unused)
if (!CONFIG(CONSOLE_SERIAL))
return;
if (!is_cse_enabled())
return;
hfs.data = me_read_config32(PCI_ME_HFSTS1);
/*
* This command can be run only if:
@ -288,6 +287,9 @@ void intel_me_status(void)
union me_hfs3 hfs3;
union me_hfs6 hfs6;
if (!is_cse_enabled())
return;
hfs.data = me_read_config32(PCI_ME_HFSTS1);
hfs2.data = me_read_config32(PCI_ME_HFSTS2);
hfs3.data = me_read_config32(PCI_ME_HFSTS3);
@ -484,6 +486,9 @@ int send_global_reset(void)
int status = -1;
union me_hfs hfs;
if (!is_cse_enabled())
goto ret;
/* Check ME operating mode */
hfs.data = me_read_config32(PCI_ME_HFSTS1);
if (hfs.fields.operation_mode)