diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc index 08cdf8a597..b2ac43f40b 100644 --- a/src/soc/amd/stoneyridge/Makefile.inc +++ b/src/soc/amd/stoneyridge/Makefile.inc @@ -8,12 +8,12 @@ bootblock-y += aoac.c bootblock-y += uart.c bootblock-y += BiosCallOuts.c bootblock-y += bootblock.c +bootblock-y += early_fch.c bootblock-y += gpio.c bootblock-y += i2c.c bootblock-y += enable_usbdebug.c bootblock-y += monotonic_timer.c bootblock-y += tsc_freq.c -bootblock-y += southbridge.c romstage-y += BiosCallOuts.c romstage-y += i2c.c @@ -47,10 +47,10 @@ ramstage-y += cpu.c ramstage-y += mca.c ramstage-y += enable_usbdebug.c ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c +ramstage-y += fch.c ramstage-y += fch_agesa.c ramstage-y += gpio.c ramstage-y += monotonic_timer.c -ramstage-y += southbridge.c ramstage-y += northbridge.c ramstage-y += sata.c ramstage-y += memmap.c diff --git a/src/soc/amd/stoneyridge/early_fch.c b/src/soc/amd/stoneyridge/early_fch.c new file mode 100644 index 0000000000..1f038f61f1 --- /dev/null +++ b/src/soc/amd/stoneyridge/early_fch.c @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static void sb_enable_lpc(void) +{ + u8 byte; + + /* Enable LPC controller */ + byte = pm_io_read8(PM_LPC_GATING); + byte |= PM_LPC_ENABLE; + pm_io_write8(PM_LPC_GATING, byte); +} + +static void sb_lpc_decode(void) +{ + u32 tmp = 0; + + /* Enable I/O decode to LPC bus */ + tmp = DECODE_ENABLE_PARALLEL_PORT0 | DECODE_ENABLE_PARALLEL_PORT2 + | DECODE_ENABLE_PARALLEL_PORT4 | DECODE_ENABLE_SERIAL_PORT0 + | DECODE_ENABLE_SERIAL_PORT1 | DECODE_ENABLE_SERIAL_PORT2 + | DECODE_ENABLE_SERIAL_PORT3 | DECODE_ENABLE_SERIAL_PORT4 + | DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT6 + | DECODE_ENABLE_SERIAL_PORT7 | DECODE_ENABLE_AUDIO_PORT0 + | DECODE_ENABLE_AUDIO_PORT1 | DECODE_ENABLE_AUDIO_PORT2 + | DECODE_ENABLE_AUDIO_PORT3 | DECODE_ENABLE_MSS_PORT2 + | DECODE_ENABLE_MSS_PORT3 | DECODE_ENABLE_FDC_PORT0 + | DECODE_ENABLE_FDC_PORT1 | DECODE_ENABLE_GAME_PORT + | DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT + | DECODE_ENABLE_ADLIB_PORT; + + /* Decode SIOs at 2E/2F and 4E/4F */ + if (CONFIG(STONEYRIDGE_LEGACY_FREE)) + tmp |= DECODE_ALTERNATE_SIO_ENABLE | DECODE_SIO_ENABLE; + + lpc_enable_decode(tmp); +} + +static void setup_spread_spectrum(int *reboot) +{ + uint16_t rstcfg = pm_read16(PWR_RESET_CFG); + + rstcfg &= ~TOGGLE_ALL_PWR_GOOD; + pm_write16(PWR_RESET_CFG, rstcfg); + + uint32_t cntl1 = misc_read32(MISC_CLK_CNTL1); + + if (cntl1 & CG1PLL_FBDIV_TEST) { + printk(BIOS_DEBUG, "Spread spectrum is ready\n"); + misc_write32(MISC_CGPLL_CONFIG1, + misc_read32(MISC_CGPLL_CONFIG1) | + CG1PLL_SPREAD_SPECTRUM_ENABLE); + + return; + } + + printk(BIOS_DEBUG, "Setting up spread spectrum\n"); + + uint32_t cfg6 = misc_read32(MISC_CGPLL_CONFIG6); + cfg6 &= ~CG1PLL_LF_MODE_MASK; + cfg6 |= (0x0f8 << CG1PLL_LF_MODE_SHIFT) & CG1PLL_LF_MODE_MASK; + misc_write32(MISC_CGPLL_CONFIG6, cfg6); + + uint32_t cfg3 = misc_read32(MISC_CGPLL_CONFIG3); + cfg3 &= ~CG1PLL_REFDIV_MASK; + cfg3 |= (0x003 << CG1PLL_REFDIV_SHIFT) & CG1PLL_REFDIV_MASK; + cfg3 &= ~CG1PLL_FBDIV_MASK; + cfg3 |= (0x04b << CG1PLL_FBDIV_SHIFT) & CG1PLL_FBDIV_MASK; + misc_write32(MISC_CGPLL_CONFIG3, cfg3); + + uint32_t cfg5 = misc_read32(MISC_CGPLL_CONFIG5); + cfg5 &= ~SS_AMOUNT_NFRAC_SLIP_MASK; + cfg5 |= (0x2 << SS_AMOUNT_NFRAC_SLIP_SHIFT) & SS_AMOUNT_NFRAC_SLIP_MASK; + misc_write32(MISC_CGPLL_CONFIG5, cfg5); + + uint32_t cfg4 = misc_read32(MISC_CGPLL_CONFIG4); + cfg4 &= ~SS_AMOUNT_DSFRAC_MASK; + cfg4 |= (0xd000 << SS_AMOUNT_DSFRAC_SHIFT) & SS_AMOUNT_DSFRAC_MASK; + cfg4 &= ~SS_STEP_SIZE_DSFRAC_MASK; + cfg4 |= (0x02d5 << SS_STEP_SIZE_DSFRAC_SHIFT) + & SS_STEP_SIZE_DSFRAC_MASK; + misc_write32(MISC_CGPLL_CONFIG4, cfg4); + + rstcfg |= TOGGLE_ALL_PWR_GOOD; + pm_write16(PWR_RESET_CFG, rstcfg); + + cntl1 |= CG1PLL_FBDIV_TEST; + misc_write32(MISC_CLK_CNTL1, cntl1); + + *reboot = 1; +} + +static void setup_misc(int *reboot) +{ + /* Undocumented register */ + uint32_t reg = misc_read32(0x50); + if (!(reg & BIT(16))) { + reg |= BIT(16); + + misc_write32(0x50, reg); + *reboot = 1; + } +} + +/* Before console init */ +void bootblock_fch_early_init(void) +{ + int reboot = 0; + + /* Enable_acpimmio_decode_pm04 to enable the ACPIMMIO decode which is needed to access + the GPIO registers. */ + enable_acpimmio_decode_pm04(); + lpc_enable_rom(); + sb_enable_lpc(); + lpc_enable_port80(); + sb_lpc_decode(); + /* Make sure the base address is predictable */ + lpc_set_spibase(SPI_BASE_ADDRESS); + fch_spi_early_init(); + fch_smbus_init(); + fch_enable_cf9_io(); + setup_spread_spectrum(&reboot); + setup_misc(&reboot); + + if (reboot) + warm_reset(); + + fch_enable_legacy_io(); + enable_aoac_devices(); + + /* disable the keyboard reset function before mainboard GPIO setup */ + if (CONFIG(DISABLE_KEYBOARD_RESET_PIN)) + fch_disable_kb_rst(); +} + +/* After console init */ +void bootblock_fch_init(void) +{ + pm_set_power_failure_state(); + fch_print_pmxc0_status(); + show_spi_speeds_and_modes(); +} + +void fch_clk_output_48Mhz(u32 osc) +{ + u32 ctrl; + + /* + * Clear the disable for OSCOUT1 (signal typically named XnnM_25M_48M) + * or OSCOUT2 (USBCLK/25M_48M_OSC). The frequency defaults to 48MHz. + */ + ctrl = misc_read32(MISC_CLK_CNTL1); + + switch (osc) { + case 1: + ctrl &= ~OSCOUT1_CLK_OUTPUT_ENB; + break; + case 2: + ctrl &= ~OSCOUT2_CLK_OUTPUT_ENB; + break; + default: + return; /* do nothing if invalid */ + } + misc_write32(MISC_CLK_CNTL1, ctrl); +} diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/fch.c similarity index 55% rename from src/soc/amd/stoneyridge/southbridge.c rename to src/soc/amd/stoneyridge/fch.c index f0442e52c1..16802eff4c 100644 --- a/src/soc/amd/stoneyridge/southbridge.c +++ b/src/soc/amd/stoneyridge/fch.c @@ -1,6 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ -#include #include #include #include @@ -12,12 +11,8 @@ #include #include #include -#include #include -#include #include -#include -#include #include #include #include @@ -26,7 +21,6 @@ #include #include #include -#include #include #include @@ -80,169 +74,6 @@ const struct irq_idx_name *sb_get_apic_reg_association(size_t *size) return irq_association; } -static void sb_enable_lpc(void) -{ - u8 byte; - - /* Enable LPC controller */ - byte = pm_io_read8(PM_LPC_GATING); - byte |= PM_LPC_ENABLE; - pm_io_write8(PM_LPC_GATING, byte); -} - -static void sb_lpc_decode(void) -{ - u32 tmp = 0; - - /* Enable I/O decode to LPC bus */ - tmp = DECODE_ENABLE_PARALLEL_PORT0 | DECODE_ENABLE_PARALLEL_PORT2 - | DECODE_ENABLE_PARALLEL_PORT4 | DECODE_ENABLE_SERIAL_PORT0 - | DECODE_ENABLE_SERIAL_PORT1 | DECODE_ENABLE_SERIAL_PORT2 - | DECODE_ENABLE_SERIAL_PORT3 | DECODE_ENABLE_SERIAL_PORT4 - | DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT6 - | DECODE_ENABLE_SERIAL_PORT7 | DECODE_ENABLE_AUDIO_PORT0 - | DECODE_ENABLE_AUDIO_PORT1 | DECODE_ENABLE_AUDIO_PORT2 - | DECODE_ENABLE_AUDIO_PORT3 | DECODE_ENABLE_MSS_PORT2 - | DECODE_ENABLE_MSS_PORT3 | DECODE_ENABLE_FDC_PORT0 - | DECODE_ENABLE_FDC_PORT1 | DECODE_ENABLE_GAME_PORT - | DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT - | DECODE_ENABLE_ADLIB_PORT; - - /* Decode SIOs at 2E/2F and 4E/4F */ - if (CONFIG(STONEYRIDGE_LEGACY_FREE)) - tmp |= DECODE_ALTERNATE_SIO_ENABLE | DECODE_SIO_ENABLE; - - lpc_enable_decode(tmp); -} - -void fch_clk_output_48Mhz(u32 osc) -{ - u32 ctrl; - - /* - * Clear the disable for OSCOUT1 (signal typically named XnnM_25M_48M) - * or OSCOUT2 (USBCLK/25M_48M_OSC). The frequency defaults to 48MHz. - */ - ctrl = misc_read32(MISC_CLK_CNTL1); - - switch (osc) { - case 1: - ctrl &= ~OSCOUT1_CLK_OUTPUT_ENB; - break; - case 2: - ctrl &= ~OSCOUT2_CLK_OUTPUT_ENB; - break; - default: - return; /* do nothing if invalid */ - } - misc_write32(MISC_CLK_CNTL1, ctrl); -} - -static void setup_spread_spectrum(int *reboot) -{ - uint16_t rstcfg = pm_read16(PWR_RESET_CFG); - - rstcfg &= ~TOGGLE_ALL_PWR_GOOD; - pm_write16(PWR_RESET_CFG, rstcfg); - - uint32_t cntl1 = misc_read32(MISC_CLK_CNTL1); - - if (cntl1 & CG1PLL_FBDIV_TEST) { - printk(BIOS_DEBUG, "Spread spectrum is ready\n"); - misc_write32(MISC_CGPLL_CONFIG1, - misc_read32(MISC_CGPLL_CONFIG1) | - CG1PLL_SPREAD_SPECTRUM_ENABLE); - - return; - } - - printk(BIOS_DEBUG, "Setting up spread spectrum\n"); - - uint32_t cfg6 = misc_read32(MISC_CGPLL_CONFIG6); - cfg6 &= ~CG1PLL_LF_MODE_MASK; - cfg6 |= (0x0f8 << CG1PLL_LF_MODE_SHIFT) & CG1PLL_LF_MODE_MASK; - misc_write32(MISC_CGPLL_CONFIG6, cfg6); - - uint32_t cfg3 = misc_read32(MISC_CGPLL_CONFIG3); - cfg3 &= ~CG1PLL_REFDIV_MASK; - cfg3 |= (0x003 << CG1PLL_REFDIV_SHIFT) & CG1PLL_REFDIV_MASK; - cfg3 &= ~CG1PLL_FBDIV_MASK; - cfg3 |= (0x04b << CG1PLL_FBDIV_SHIFT) & CG1PLL_FBDIV_MASK; - misc_write32(MISC_CGPLL_CONFIG3, cfg3); - - uint32_t cfg5 = misc_read32(MISC_CGPLL_CONFIG5); - cfg5 &= ~SS_AMOUNT_NFRAC_SLIP_MASK; - cfg5 |= (0x2 << SS_AMOUNT_NFRAC_SLIP_SHIFT) & SS_AMOUNT_NFRAC_SLIP_MASK; - misc_write32(MISC_CGPLL_CONFIG5, cfg5); - - uint32_t cfg4 = misc_read32(MISC_CGPLL_CONFIG4); - cfg4 &= ~SS_AMOUNT_DSFRAC_MASK; - cfg4 |= (0xd000 << SS_AMOUNT_DSFRAC_SHIFT) & SS_AMOUNT_DSFRAC_MASK; - cfg4 &= ~SS_STEP_SIZE_DSFRAC_MASK; - cfg4 |= (0x02d5 << SS_STEP_SIZE_DSFRAC_SHIFT) - & SS_STEP_SIZE_DSFRAC_MASK; - misc_write32(MISC_CGPLL_CONFIG4, cfg4); - - rstcfg |= TOGGLE_ALL_PWR_GOOD; - pm_write16(PWR_RESET_CFG, rstcfg); - - cntl1 |= CG1PLL_FBDIV_TEST; - misc_write32(MISC_CLK_CNTL1, cntl1); - - *reboot = 1; -} - -static void setup_misc(int *reboot) -{ - /* Undocumented register */ - uint32_t reg = misc_read32(0x50); - if (!(reg & BIT(16))) { - reg |= BIT(16); - - misc_write32(0x50, reg); - *reboot = 1; - } -} - -/* Before console init */ -void bootblock_fch_early_init(void) -{ - int reboot = 0; - - /* Enable_acpimmio_decode_pm04 to enable the ACPIMMIO decode which is needed to access - the GPIO registers. */ - enable_acpimmio_decode_pm04(); - lpc_enable_rom(); - sb_enable_lpc(); - lpc_enable_port80(); - sb_lpc_decode(); - /* Make sure the base address is predictable */ - lpc_set_spibase(SPI_BASE_ADDRESS); - fch_spi_early_init(); - fch_smbus_init(); - fch_enable_cf9_io(); - setup_spread_spectrum(&reboot); - setup_misc(&reboot); - - if (reboot) - warm_reset(); - - fch_enable_legacy_io(); - enable_aoac_devices(); - - /* disable the keyboard reset function before mainboard GPIO setup */ - if (CONFIG(DISABLE_KEYBOARD_RESET_PIN)) - fch_disable_kb_rst(); -} - -/* After console init */ -void bootblock_fch_init(void) -{ - pm_set_power_failure_state(); - fch_print_pmxc0_status(); - show_spi_speeds_and_modes(); -} - static void fch_init_acpi_ports(void) { u32 reg;