google/poppy: fix finger print sensor interrupt gpio configuration
Configure the right GPIOs for finger print sensor interrupt and reset lines. As per the schematics GPP_C8 is for sensor interrupt and GPP_C9 is for sensor reset. Change-Id: Ib25c68ec2fe20b1302b6170d67ceab7e8cca1a83 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/18389 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
This commit is contained in:
parent
3329262eca
commit
2ea12e5ce0
|
@ -100,8 +100,8 @@ static const struct pad_config gpio_table[] = {
|
|||
/* SML0ALERT# */ PAD_CFG_NC(GPP_C5),
|
||||
/* SM1CLK */ PAD_CFG_GPI(GPP_C6, 20K_PU, DEEP), /* EC_IN_RW */
|
||||
/* SM1DATA */ PAD_CFG_NC(GPP_C7),
|
||||
/* UART0_RXD */ PAD_CFG_NC(GPP_C8),
|
||||
/* UART0_TXD */ PAD_CFG_NC(GPP_C9),
|
||||
/* UART0_RXD */ PAD_CFG_GPI_APIC(GPP_C8, NONE, PLTRST), /* FP_INT */
|
||||
/* UART0_TXD */ PAD_CFG_GPO(GPP_C9, 0, DEEP), /* FP_RST_ODL */
|
||||
/* UART0_RTS# */ PAD_CFG_NC(GPP_C10),
|
||||
/* UART0_CTS# */ PAD_CFG_NC(GPP_C11),
|
||||
/* UART1_RXD */ PAD_CFG_GPI(GPP_C12, NONE, DEEP), /* MEM_CONFIG[0] */
|
||||
|
@ -135,8 +135,8 @@ static const struct pad_config gpio_table[] = {
|
|||
/* ISH_SPI_MISO */ PAD_CFG_GPI_APIC(GPP_D11, NONE,
|
||||
PLTRST), /* SPKR_INT_L */
|
||||
/* ISH_SPI_MOSI */ PAD_CFG_NC(GPP_D12),
|
||||
/* ISH_UART0_RXD */ PAD_CFG_GPI_APIC(GPP_D13, NONE, PLTRST), /* FP_INT */
|
||||
/* ISH_UART0_TXD */ PAD_CFG_GPO(GPP_D14, 0, DEEP), /* FP_RST_ODL */
|
||||
/* ISH_UART0_RXD */ PAD_CFG_NC(GPP_D13),
|
||||
/* ISH_UART0_TXD */ PAD_CFG_NC(GPP_D14),
|
||||
/* ISH_UART0_RTS# */ PAD_CFG_GPI_APIC(GPP_D15, NONE, PLTRST), /* MIC_IRQ_L */
|
||||
/* ISH_UART0_CTS# */ PAD_CFG_NC(GPP_D16),
|
||||
/* DMIC_CLK1 */ PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1), /* DMIC_CLK1 */
|
||||
|
|
Loading…
Reference in New Issue