mainboard/intel/kblrvp: Enabling Kaby Lake RVP7
Add support for Kaby Lake RVP7 board * Add RVP7 board support in Kconfig * Override default descriptor and ME binary paths in Kconfig since those binaries will differ for RVP3 and RVP7 * Add RVP7 board name in board_info.txt and Kconfig.name * Add devicetree.cb for RVP7 in the variants path * Add gpio.h for RVP7 in variants/include/variant path * Made board specific code for retrieving spd, i.e., in RVP7 there is non-soldered DIMMs, so SPD is read through smbus, unlike RVP3 where memory DIMMs are soldered down with board. Hence for RVP3, the spd binaries will be fixed and can be kept as binary file in cbfs. BUG=none BRANCH=none TEST=Built and boot Kaby Lake RVP7 Change-Id: I6f3d17d857bad1b5cf39f0bc900c760fee72da48 Signed-off-by: Barnali Sarkar <barnali.sarkar@intel.com> Reviewed-on: https://review.coreboot.org/17637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit is contained in:
Barnali Sarkar
Furquan Shaikh
parent
d9e654321c
commit
2ed14f61d1
|
|
@ -1,4 +1,4 @@
|
|||
if BOARD_INTEL_KBLRVP3
|
||||
if BOARD_INTEL_KBLRVP3 || BOARD_INTEL_KBLRVP7
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||
def_bool y
|
||||
|
|
@ -50,7 +50,8 @@ config MAINBOARD_DIR
|
|||
|
||||
config VARIANT_DIR
|
||||
string
|
||||
default "rvp3"
|
||||
default "rvp3" if BOARD_INTEL_KBLRVP3
|
||||
default "rvp7" if BOARD_INTEL_KBLRVP7
|
||||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
|
|
@ -76,4 +77,16 @@ config GBB_HWID
|
|||
config DEVICETREE
|
||||
string
|
||||
default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
|
||||
|
||||
config IFD_BIN_PATH
|
||||
string
|
||||
depends on HAVE_IFD_BIN
|
||||
default "3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR)/descriptor.rvp3.bin" if BOARD_INTEL_KBLRVP3
|
||||
default "3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR)/descriptor.rvp7.bin" if BOARD_INTEL_KBLRVP7
|
||||
|
||||
config ME_BIN_PATH
|
||||
string
|
||||
depends on HAVE_ME_BIN
|
||||
default "3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR)/me.rvp3.bin" if BOARD_INTEL_KBLRVP3
|
||||
default "3rdparty/blobs/mainboard/$(CONFIG_MAINBOARD_DIR)/me.rvp7.bin" if BOARD_INTEL_KBLRVP7
|
||||
endif
|
||||
|
|
|
|||
|
|
@ -1,2 +1,4 @@
|
|||
config BOARD_INTEL_KBLRVP3
|
||||
bool "Kabylake LPDDR3 RVP3"
|
||||
config BOARD_INTEL_KBLRVP7
|
||||
bool "Kabylake DDR3L RVP7"
|
||||
|
|
|
|||
|
|
@ -1,5 +1,5 @@
|
|||
Vendor name: Intel
|
||||
Board name: Kblrvp Kabylake RVP3 LPDDR3
|
||||
Board name: Kabylake RVP Reference Board
|
||||
Category: eval
|
||||
ROM protocol: SPI
|
||||
ROM socketed: n
|
||||
|
|
|
|||
|
|
@ -31,7 +31,6 @@ void mainboard_memory_init_params(FSPM_UPD *mupd)
|
|||
{
|
||||
FSP_M_CONFIG *mem_cfg;
|
||||
mem_cfg = &mupd->FspmConfig;
|
||||
struct region_device spd_rdev;
|
||||
u8 spd_index = (get_board_id() >> 5) & 0x7;
|
||||
|
||||
printk(BIOS_INFO, "SPD index %d\n", spd_index);
|
||||
|
|
@ -41,15 +40,22 @@ void mainboard_memory_init_params(FSPM_UPD *mupd)
|
|||
mainboard_fill_rcomp_res_data(&mem_cfg->RcompResistor);
|
||||
mainboard_fill_rcomp_strength_data(&mem_cfg->RcompTarget);
|
||||
|
||||
/* RVP3 SPD */
|
||||
mem_cfg->DqPinsInterleaved = 0;
|
||||
if (IS_ENABLED(CONFIG_BOARD_INTEL_KBLRVP3)) {
|
||||
struct region_device spd_rdev;
|
||||
|
||||
if (get_spd_cbfs_rdev(&spd_rdev, spd_index) < 0) {
|
||||
die("spd.bin not found\n");
|
||||
mem_cfg->DqPinsInterleaved = 0;
|
||||
if (get_spd_cbfs_rdev(&spd_rdev, spd_index) < 0)
|
||||
die("spd.bin not found\n");
|
||||
mem_cfg->MemorySpdDataLen = region_device_sz(&spd_rdev);
|
||||
/* Memory leak is ok since we have memory mapped boot media */
|
||||
mem_cfg->MemorySpdPtr00 = (uintptr_t)rdev_mmap_full(&spd_rdev);
|
||||
} else { /* for CONFIG_BOARD_INTEL_KBLRVP7 */
|
||||
struct spd_block blk;
|
||||
|
||||
mem_cfg->DqPinsInterleaved = 1;
|
||||
get_spd_smbus(&blk);
|
||||
mem_cfg->MemorySpdDataLen = blk.len;
|
||||
mem_cfg->MemorySpdPtr00 = (u32)blk.spd_array[0];
|
||||
}
|
||||
|
||||
mem_cfg->MemorySpdDataLen = region_device_sz(&spd_rdev);
|
||||
/* Memory leak is ok since we have memory mapped boot media */
|
||||
mem_cfg->MemorySpdPtr00 = (uintptr_t)rdev_mmap_full(&spd_rdev);
|
||||
mem_cfg->MemorySpdPtr10 = mem_cfg->MemorySpdPtr00;
|
||||
}
|
||||
|
|
|
|||
|
|
@ -0,0 +1,267 @@
|
|||
chip soc/intel/skylake
|
||||
|
||||
# SATA port 0
|
||||
register "EnableSata" = "1"
|
||||
register "SataPortsEnable[0]" = "1"
|
||||
register "SataPortsEnable[1]" = "1"
|
||||
register "SataPortsEnable[2]" = "1"
|
||||
|
||||
# Enable deep Sx states
|
||||
register "deep_s5_enable" = "1"
|
||||
register "deep_sx_config" = "DSX_EN_LAN_WAKE_PIN"
|
||||
|
||||
# GPE configuration
|
||||
# Note that GPE events called out in ASL code rely on this
|
||||
# route. i.e. If this route changes then the affected GPE
|
||||
# offset bits also need to be changed.
|
||||
register "gpe0_dw0" = "GPP_B"
|
||||
register "gpe0_dw1" = "GPP_D"
|
||||
register "gpe0_dw2" = "GPP_E"
|
||||
|
||||
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
|
||||
register "gen1_dec" = "0x00fc0801"
|
||||
register "gen2_dec" = "0x000c0201"
|
||||
|
||||
# Enable "Intel Speed Shift Technology"
|
||||
register "speed_shift_enable" = "1"
|
||||
|
||||
# Enable DPTF
|
||||
register "dptf_enable" = "1"
|
||||
|
||||
# FSP Configuration
|
||||
register "SmbusEnable" = "1"
|
||||
register "ScsEmmcEnabled" = "1"
|
||||
register "ScsEmmcHs400Enabled" = "1"
|
||||
register "ScsSdCardEnabled" = "2"
|
||||
register "InternalGfx" = "1"
|
||||
register "SkipExtGfxScan" = "1"
|
||||
register "Device4Enable" = "1"
|
||||
register "HeciEnabled" = "0"
|
||||
register "SaGv" = "3"
|
||||
register "PmTimerDisabled" = "1"
|
||||
|
||||
register "pirqa_routing" = "PCH_IRQ11"
|
||||
register "pirqb_routing" = "PCH_IRQ10"
|
||||
register "pirqc_routing" = "PCH_IRQ11"
|
||||
register "pirqd_routing" = "PCH_IRQ11"
|
||||
register "pirqe_routing" = "PCH_IRQ11"
|
||||
register "pirqf_routing" = "PCH_IRQ11"
|
||||
register "pirqg_routing" = "PCH_IRQ11"
|
||||
register "pirqh_routing" = "PCH_IRQ11"
|
||||
|
||||
# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
|
||||
# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
|
||||
register "PmConfigSlpS3MinAssert" = "0x02"
|
||||
|
||||
# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
|
||||
register "PmConfigSlpS4MinAssert" = "0x04"
|
||||
|
||||
# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
|
||||
register "PmConfigSlpSusMinAssert" = "0x03"
|
||||
|
||||
# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
|
||||
register "PmConfigSlpAMinAssert" = "0x03"
|
||||
|
||||
# Determines if enable Serial IRQ. Values 0: Disabled, 1: Enabled
|
||||
register "SerialIrqConfigSirqEnable" = "0x01"
|
||||
|
||||
# VR Settings Configuration for 5 Domains
|
||||
#+----------------+-------+-------+-------------+-------------+-------+
|
||||
#| Domain/Setting | SA | IA | Ring Sliced | GT Unsliced | GT |
|
||||
#+----------------+-------+-------+-------------+-------------+-------+
|
||||
#| Psi1Threshold | 20A | 20A | 20A | 20A | 20A |
|
||||
#| Psi2Threshold | 4A | 5A | 5A | 5A | 5A |
|
||||
#| Psi3Threshold | 1A | 1A | 1A | 1A | 1A |
|
||||
#| Psi3Enable | 1 | 1 | 1 | 1 | 1 |
|
||||
#| Psi4Enable | 1 | 1 | 1 | 1 | 1 |
|
||||
#| ImonSlope | 0 | 0 | 0 | 0 | 0 |
|
||||
#| ImonOffset | 0 | 0 | 0 | 0 | 0 |
|
||||
#| IccMax | 7A | 34A | 34A | 35A | 35A |
|
||||
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V | 1.52V |
|
||||
#+----------------+-------+-------+-------------+-------------+-------+
|
||||
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = 0x50, \
|
||||
.psi2threshold = 0x14, \
|
||||
.psi3threshold = 0x4, \
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 1, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0x0, \
|
||||
.voltage_limit = 0x0 \
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_IA_CORE]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = 0x50, \
|
||||
.psi2threshold = 0x14, \
|
||||
.psi3threshold = 0x4, \
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 1, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0x0, \
|
||||
.voltage_limit = 0x0 \
|
||||
}"
|
||||
register "domain_vr_config[VR_RING]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = 0x50, \
|
||||
.psi2threshold = 0x14, \
|
||||
.psi3threshold = 0x4, \
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 1, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0x0, \
|
||||
.voltage_limit = 0x0, \
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_UNSLICED]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = 0x50, \
|
||||
.psi2threshold = 0x14, \
|
||||
.psi3threshold = 0x4, \
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 1, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0x0 ,\
|
||||
.voltage_limit = 0x0 \
|
||||
}"
|
||||
|
||||
register "domain_vr_config[VR_GT_SLICED]" = "{
|
||||
.vr_config_enable = 1, \
|
||||
.psi1threshold = 0x50, \
|
||||
.psi2threshold = 0x14, \
|
||||
.psi3threshold = 0x4, \
|
||||
.psi3enable = 1, \
|
||||
.psi4enable = 1, \
|
||||
.imon_slope = 0x0, \
|
||||
.imon_offset = 0x0, \
|
||||
.icc_max = 0x0, \
|
||||
.voltage_limit = 0x0 \
|
||||
}"
|
||||
|
||||
register "FspSkipMpInit" = "1"
|
||||
|
||||
# Enable Root ports.
|
||||
register "PcieRpEnable[2]" = "1"
|
||||
register "PcieRpEnable[3]" = "1"
|
||||
register "PcieRpEnable[4]" = "1"
|
||||
register "PcieRpEnable[5]" = "1"
|
||||
register "PcieRpEnable[8]" = "1"
|
||||
|
||||
# Enable CLKREQ#
|
||||
register "PcieRpClkReqSupport[2]" = "1"
|
||||
register "PcieRpClkReqSupport[3]" = "1"
|
||||
register "PcieRpClkReqSupport[4]" = "1"
|
||||
register "PcieRpClkReqSupport[5]" = "1"
|
||||
register "PcieRpClkReqSupport[8]" = "1"
|
||||
|
||||
# RP 9 uses SRCCLKREQ5#
|
||||
register "PcieRpClkReqNumber[2]" = "5"
|
||||
register "PcieRpClkReqNumber[3]" = "2"
|
||||
register "PcieRpClkReqNumber[4]" = "3"
|
||||
register "PcieRpClkReqNumber[5]" = "4"
|
||||
register "PcieRpClkReqNumber[8]" = "1"
|
||||
|
||||
|
||||
# USB 2.0 Enable all ports
|
||||
register "usb2_ports[0]" = "USB2_PORT_MAX(OC0)" # TYPE-A Port
|
||||
register "usb2_ports[1]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
|
||||
register "usb2_ports[2]" = "USB2_PORT_MAX(OC_SKIP)" # Bluetooth
|
||||
register "usb2_ports[4]" = "USB2_PORT_MAX(OC1)" # Type-A Port
|
||||
register "usb2_ports[5]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
|
||||
register "usb2_ports[6]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
|
||||
register "usb2_ports[7]" = "USB2_PORT_MAX(OC2)" # TYPE-A Port
|
||||
register "usb2_ports[8]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
|
||||
register "usb2_ports[9]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
|
||||
register "usb2_ports[10]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
|
||||
register "usb2_ports[11]" = "USB2_PORT_MAX(OC_SKIP)" # TYPE-A Port
|
||||
|
||||
# USB 3.0 Enable Port 1-4. Port 5 & 6 Disabled
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)" # TYPE-A Port
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
|
||||
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
|
||||
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)" # TYPE-A Port
|
||||
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC2)" # TYPE-A Port
|
||||
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # TYPE-A Port
|
||||
|
||||
register "SerialIoDevMode" = "{ \
|
||||
[PchSerialIoIndexI2C0] = PchSerialIoPci, \
|
||||
[PchSerialIoIndexI2C1] = PchSerialIoPci, \
|
||||
[PchSerialIoIndexI2C2] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexI2C3] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexI2C4] = PchSerialIoPci, \
|
||||
[PchSerialIoIndexI2C5] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexSpi0] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexSpi1] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexUart0] = PchSerialIoPci, \
|
||||
[PchSerialIoIndexUart1] = PchSerialIoDisabled, \
|
||||
[PchSerialIoIndexUart2] = PchSerialIoSkipInit, \
|
||||
}"
|
||||
|
||||
# Send an extra VR mailbox command for the PS4 exit issue
|
||||
register "SendVrMbxCmd" = "2"
|
||||
|
||||
# Enable/Disable VMX feature
|
||||
register "VmxEnable" = "0"
|
||||
|
||||
# Use default SD card detect GPIO configuration
|
||||
register "sdcard_cd_gpio_default" = "GPP_G5"
|
||||
|
||||
device cpu_cluster 0 on
|
||||
device lapic 0 on end
|
||||
end
|
||||
device domain 0 on
|
||||
device pci 00.0 on end # Host Bridge
|
||||
device pci 02.0 on end # Integrated Graphics Device
|
||||
device pci 14.0 on end # USB xHCI
|
||||
device pci 14.1 off end # USB xDCI (OTG)
|
||||
device pci 14.2 on end # Thermal Subsystem
|
||||
device pci 15.0 on end # I2C #0
|
||||
device pci 15.1 on end # I2C #1
|
||||
device pci 15.2 off end # I2C #2
|
||||
device pci 15.3 off end # I2C #3
|
||||
device pci 16.0 on end # Management Engine Interface 1
|
||||
device pci 16.1 off end # Management Engine Interface 2
|
||||
device pci 16.2 off end # Management Engine IDE-R
|
||||
device pci 16.3 off end # Management Engine KT Redirection
|
||||
device pci 16.4 off end # Management Engine Interface 3
|
||||
device pci 17.0 on end # SATA
|
||||
device pci 19.0 on end # UART #2
|
||||
device pci 19.1 off end # I2C #5
|
||||
device pci 19.2 on end #
|
||||
device pci 1c.0 on end # PCI Express Port 1
|
||||
device pci 1c.1 off end # PCI Express Port 2
|
||||
device pci 1c.2 on end # PCI Express Port 3
|
||||
device pci 1c.3 on end # PCI Express Port 4
|
||||
device pci 1c.4 on end # PCI Express Port 5
|
||||
device pci 1c.5 on end # PCI Express Port 6
|
||||
device pci 1c.6 off end # PCI Express Port 7
|
||||
device pci 1c.7 off end # PCI Express Port 8
|
||||
device pci 1d.0 on end # PCI Express Port 9
|
||||
device pci 1d.1 off end # PCI Express Port 10
|
||||
device pci 1d.2 off end # PCI Express Port 11
|
||||
device pci 1d.3 off end # PCI Express Port 12
|
||||
device pci 1e.0 on end # UART #0
|
||||
device pci 1e.1 off end # UART #1
|
||||
device pci 1e.2 off end # GSPI #0
|
||||
device pci 1e.3 off end # GSPI #1
|
||||
device pci 1e.4 on end # eMMC
|
||||
device pci 1e.5 off end # SDIO
|
||||
device pci 1e.6 on end # SDCard
|
||||
device pci 1f.0 on
|
||||
chip drivers/pc80/tpm
|
||||
device pnp 0c31.0 on end
|
||||
end
|
||||
end # LPC Interface
|
||||
device pci 1f.1 on end # P2SB
|
||||
device pci 1f.2 on end # Power Management Controller
|
||||
device pci 1f.3 on end # Intel HDA
|
||||
device pci 1f.4 on end # SMBus
|
||||
device pci 1f.5 on end # PCH SPI
|
||||
device pci 1f.6 off end # GbE
|
||||
end
|
||||
end
|
||||
|
|
@ -0,0 +1,221 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2013 Google Inc.
|
||||
* Copyright (C) 2015 Intel Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef _GPIORVP7_H
|
||||
#define _GPIORVP7_H
|
||||
|
||||
#include <soc/gpe.h>
|
||||
#include <soc/gpio.h>
|
||||
|
||||
/* TCA6424A I/O Expander */
|
||||
#define IO_EXPANDER_BUS 4
|
||||
#define IO_EXPANDER_0_ADDR 0x22
|
||||
#define IO_EXPANDER_P0CONF 0x0C /* Port 0 conf offset */
|
||||
#define IO_EXPANDER_P0DOUT 0x04 /* Port 0 data offset */
|
||||
#define IO_EXPANDER_P1CONF 0x0D
|
||||
#define IO_EXPANDER_P1DOUT 0x05
|
||||
#define IO_EXPANDER_P2CONF 0x0E
|
||||
#define IO_EXPANDER_P2DOUT 0x06
|
||||
#define IO_EXPANDER_1_ADDR 0x23
|
||||
|
||||
|
||||
/* GPE_EC_WAKE */
|
||||
#define GPE_EC_WAKE GPE0_LAN_WAK
|
||||
|
||||
/* CHROMEEC in RVP */
|
||||
#define EC_SCI_GPI GPP_E16
|
||||
#define EC_SMI_GPI GPP_E15
|
||||
/*
|
||||
* Gpio based irq for touchpad, 18th index in North Bank
|
||||
* MAX_DIRECT_IRQ + GPSW_SIZE + 19
|
||||
*/
|
||||
#define KBLRVP_TOUCHPAD_IRQ 33
|
||||
|
||||
#define KBLRVP_TOUCH_IRQ 31
|
||||
|
||||
#define BOARD_TOUCHPAD_NAME "touchpad"
|
||||
#define BOARD_TOUCHPAD_IRQ KBLRVP_TOUCHPAD_IRQ
|
||||
#define BOARD_TOUCHPAD_I2C_BUS 0
|
||||
#define BOARD_TOUCHPAD_I2C_ADDR 0x20
|
||||
|
||||
#define BOARD_TOUCHSCREEN_NAME "touchscreen"
|
||||
#define BOARD_TOUCHSCREEN_IRQ KBLRVP_TOUCH_IRQ
|
||||
#define BOARD_TOUCHSCREEN_I2C_BUS 0
|
||||
#define BOARD_TOUCHSCREEN_I2C_ADDR 0x4c
|
||||
|
||||
#ifndef __ACPI__
|
||||
|
||||
/* Pad configuration in ramstage. */
|
||||
static const struct pad_config gpio_table[] = {
|
||||
/* PM_SLP_S0ix_R_N*/ PAD_CFG_GPO(GPP_A7, 1, DEEP),
|
||||
/* LPC_CLKRUN */ PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1),
|
||||
/* PCH_CLK_PCI_TPM */ PAD_CFG_NF(GPP_A10, NONE, DEEP, NF1),
|
||||
/* PCH_LPC_CLK */ PAD_CFG_GPI_APIC(GPP_A11, NONE, DEEP),
|
||||
/* ISH_KB_PROX_INT */ PAD_CFG_GPO(GPP_A12, 1, RSMRST),
|
||||
/* PCH_SUSPWRACB */ PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1),
|
||||
/* PCH_SUSACK */ PAD_CFG_NF(GPP_A15, 20K_PD, DEEP, NF1),
|
||||
/* SD_1P8_SEL */ PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
|
||||
/* SD_PWR_EN */ PAD_CFG_NF(GPP_A17, NONE, DEEP, NF1),
|
||||
/* ACCEL INTERRUPT */ PAD_CFG_NF(GPP_A18, NONE, DEEP, NF1),
|
||||
/* ISH_GP1 */ PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1),
|
||||
/* GYRO_DRDY */ PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1),
|
||||
/* FLIP_ACCEL_INT */ PAD_CFG_NF(GPP_A21, NONE, DEEP, NF1),
|
||||
/* GYRO_INT */ PAD_CFG_GPO(GPP_A22, 1, DEEP),
|
||||
/* ISH_GP5 */ PAD_CFG_GPI_APIC(GPP_A23, NONE, DEEP),
|
||||
/* CORE_VID0 */ PAD_CFG_NF(GPP_B0, NONE, DEEP, NF1),
|
||||
/* CORE_VID1 */ PAD_CFG_NF(GPP_B1, NONE, DEEP, NF1),
|
||||
/* HSJ_MIC_DET */ PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1),
|
||||
/* TRACKPAD_INT */ PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST),
|
||||
/* BT_RF_KILL */ PAD_CFG_GPO(GPP_B4, 1, DEEP),
|
||||
/* SRCCLKREQ0# */ PAD_CFG_GPI_APIC(GPP_B5, NONE, DEEP),
|
||||
/* MPHY_EXT_PWR_GATE */ PAD_CFG_NF(GPP_B11, NONE, DEEP, NF1),
|
||||
/* PM_SLP_S0 */ PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1),
|
||||
/* PCH_PLT_RST */ PAD_CFG_NF(GPP_B13, NONE, DEEP, NF1),
|
||||
/* GPP_B_14_SPKR */ PAD_CFG_TERM_GPO(GPP_B14, 1, 20K_PD, DEEP),
|
||||
/* WLAN_PCIE_WAKE */ PAD_CFG_GPI_ACPI_SCI(GPP_B16, NONE, PLTRST, YES),
|
||||
/* TBT_CIO_PLUG_EVT */ PAD_CFG_GPI_ACPI_SCI(GPP_B17, 20K_PU, PLTRST, YES),
|
||||
/* PCH_SLOT1_WAKE_N */ PAD_CFG_GPI_ACPI_SCI(GPP_B18, 20K_PU, PLTRST, YES),
|
||||
/* CCODEC_SPI_CS */ PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),
|
||||
/* CODEC_SPI_CLK */ PAD_CFG_NF(GPP_B20, 20K_PD, DEEP, NF1),
|
||||
/* CODEC_SPI_MISO */ PAD_CFG_NF(GPP_B21, 20K_PD, DEEP, NF1),
|
||||
/* CODEC_SPI_MOSI */ PAD_CFG_NF(GPP_B22, 20K_PD, DEEP, NF1),
|
||||
/* SM1ALERT# */ PAD_CFG_TERM_GPO(GPP_B23, 1, 20K_PD, DEEP),
|
||||
/* SMB_CLK */ PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
|
||||
/* SMB_DATA */ PAD_CFG_NF(GPP_C1, 20K_PD, DEEP, NF1),
|
||||
/* SMBALERT# */ PAD_CFG_TERM_GPO(GPP_C2, 1, 20K_PD, DEEP),
|
||||
/* M2_WWAN_PWREN */ PAD_CFG_NF(GPP_C3, NONE, DEEP, NF1),
|
||||
/* SML0DATA */ PAD_CFG_NF(GPP_C4, NONE, DEEP, NF1),
|
||||
/* SML0ALERT# */ PAD_CFG_GPI_APIC(GPP_C5, 20K_PD, DEEP),
|
||||
/* EC_IN_RW */ PAD_CFG_NF(GPP_C6, NONE, DEEP, NF1),
|
||||
/* USB_CTL */ PAD_CFG_NF(GPP_C7, 20K_PD, DEEP, NF1),
|
||||
/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
|
||||
/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
|
||||
/* NFC_RST* */ PAD_CFG_NF(GPP_C10, NONE, DEEP, NF1),
|
||||
/* EN_PP3300_KEPLER */ PAD_CFG_NF(GPP_C11, NONE, DEEP, NF1),
|
||||
/* PCH_MEM_CFG0 */ PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1),
|
||||
/* PCH_MEM_CFG1 */ PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1),
|
||||
/* PCH_MEM_CFG2 */ PAD_CFG_NF(GPP_C14, NONE, DEEP, NF1),
|
||||
/* PCH_MEM_CFG3 */ PAD_CFG_NF(GPP_C15, NONE, DEEP, NF1),
|
||||
/* I2C0_SDA */ PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
|
||||
/* I2C0_SCL */ PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
|
||||
/* I2C1_SDA */ PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
|
||||
/* I2C1_SCL */ PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
|
||||
/* GD_UART2_RXD */ PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1),
|
||||
/* GD_UART2_TXD */ PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1),
|
||||
/* TCH_PNL_PWREN */ PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1),
|
||||
/* SPI_WP_STATUS */ PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1),
|
||||
/* ITCH_SPI_CS */ PAD_CFG_NF(GPP_D0, NONE, DEEP, NF1),
|
||||
/* ITCH_SPI_CLK */ PAD_CFG_NF(GPP_D1, NONE, DEEP, NF1),
|
||||
/* ITCH_SPI_MISO_1 */ PAD_CFG_NF(GPP_D2, NONE, DEEP, NF1),
|
||||
/* ITCH_SPI_MISO_0 */ PAD_CFG_NF(GPP_D3, NONE, DEEP, NF1),
|
||||
/* CAM_FLASH_STROBE */ PAD_CFG_NF(GPP_D4, NONE, DEEP, NF1),
|
||||
/* EN_PP3300_DX_EMMC */ PAD_CFG_NF(GPP_D5, NONE, DEEP, NF1),
|
||||
/* EN_PP1800_DX_EMMC */ PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1),
|
||||
/* SH_I2C1_SDA */ PAD_CFG_NF(GPP_D7, NONE, DEEP, NF1),
|
||||
/* SH_I2C1_SCL */ PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1),
|
||||
PAD_CFG_GPI(GPP_D9, NONE, DEEP),
|
||||
/* SD_D3_WAKE */ PAD_CFG_GPI(GPP_D10, NONE, DEEP),
|
||||
/* USB_A1_ILIM_SEL */ PAD_CFG_GPI(GPP_D11, NONE, DEEP),
|
||||
/* EN_PP3300_DX_CAM */ PAD_CFG_GPI(GPP_D12, NONE, DEEP),
|
||||
/* EN_PP1800_DX_AUDIO */PAD_CFG_NF(GPP_D13, NONE, DEEP, NF1),
|
||||
/* ISH_UART0_TXD */ PAD_CFG_NF(GPP_D14, NONE, DEEP, NF1),
|
||||
/* ISH_UART0_RTS */ PAD_CFG_NF(GPP_D15, NONE, DEEP, NF1),
|
||||
/* ISH_UART0_CTS */ PAD_CFG_NF(GPP_D16, NONE, DEEP, NF1),
|
||||
/* DMIC_CLK_1 */ PAD_CFG_NF(GPP_D17, NONE, DEEP, NF1),
|
||||
/* DMIC_DATA_1 */ PAD_CFG_NF(GPP_D18, 20K_PD, DEEP, NF1),
|
||||
/* DMIC_CLK_0 */ PAD_CFG_NF(GPP_D19, NONE, DEEP, NF1),
|
||||
/* DMIC_DATA_0 */ PAD_CFG_NF(GPP_D20, 20K_PD, DEEP, NF1),
|
||||
/* ITCH_SPI_D2 */ PAD_CFG_NF(GPP_D21, NONE, DEEP, NF1),
|
||||
/* ITCH_SPI_D3 */ PAD_CFG_NF(GPP_D22, NONE, DEEP, NF1),
|
||||
/* I2S_MCLK */ PAD_CFG_NF(GPP_D23, NONE, DEEP, NF1),
|
||||
/* SPI_TPM_IRQ */ PAD_CFG_GPI_APIC(GPP_E0, 20K_PD, DEEP),
|
||||
/* SATAXPCIE1 */ PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
|
||||
/* SSD_PEDET */ PAD_CFG_GPI(GPP_E2, NONE, DEEP),
|
||||
/* CPU_GP0 */ PAD_CFG_GPO(GPP_E3, 1, RSMRST),
|
||||
/* SATA_DEVSLP1 */ PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1),
|
||||
/* SATA_DEVSLP2 */ PAD_CFG_NF(GPP_E6, NONE, DEEP, NF1),
|
||||
PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1),
|
||||
/* USB2_OC_0 */ PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
|
||||
/* USB2_OC_1 */ PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
|
||||
/* USB2_OC_2 */ PAD_CFG_NF(GPP_E11, NONE, DEEP, NF1),
|
||||
/* DDI1_HPD */ PAD_CFG_NF(GPP_E13, NONE, DEEP, NF1),
|
||||
/* DDI2_HPD */ PAD_CFG_NF(GPP_E14, NONE, DEEP, NF1),
|
||||
/* EC_SMI */ PAD_CFG_GPI_ACPI_SMI(GPP_E15, NONE, DEEP, YES),
|
||||
/* EC_SCI */ PAD_CFG_GPI_ACPI_SCI(GPP_E16, NONE, PLTRST, YES),
|
||||
/* EDP_HPD */ PAD_CFG_NF(GPP_E17, NONE, DEEP, NF1),
|
||||
/* DDPB_CTRLCLK */ PAD_CFG_NF(GPP_E18, NONE, DEEP, NF1),
|
||||
/* DDPB_CTRLDATA */ PAD_CFG_NF(GPP_E19, 20K_PD, DEEP, NF1),
|
||||
/* DDPC_CTRLCLK */ PAD_CFG_NF(GPP_E20, NONE, DEEP, NF1),
|
||||
/* DDPC_CTRLDATA */ PAD_CFG_NF(GPP_E21, NONE, DEEP, NF1),
|
||||
/* PCH_CODEC_IRQ */ PAD_CFG_GPI_APIC(GPP_E22, NONE, DEEP),
|
||||
/* TCH_PNL_RST */ PAD_CFG_TERM_GPO(GPP_E23, 1, 20K_PD, DEEP),
|
||||
/* I2S2_SCLK */ PAD_CFG_NF(GPP_F0, NONE, DEEP, NF1),
|
||||
/* I2S2_SFRM */ PAD_CFG_NF(GPP_F1, NONE, DEEP, NF1),
|
||||
/* I2S2_TXD */ PAD_CFG_NF(GPP_F2, NONE, DEEP, NF1),
|
||||
/* I2S2_RXD */ PAD_CFG_NF(GPP_F3, NONE, DEEP, NF1),
|
||||
/* I2C2_SDA */ PAD_CFG_NF(GPP_F4, NONE, DEEP, NF1),
|
||||
/* I2C2_SCL */ PAD_CFG_NF(GPP_F5, NONE, DEEP, NF1),
|
||||
/* I2C3_SDA */ PAD_CFG_NF(GPP_F6, NONE, DEEP, NF1),
|
||||
/* I2C3_SCL */ PAD_CFG_NF(GPP_F7, NONE, DEEP, NF1),
|
||||
/* I2C4_SDA */ PAD_CFG_NF(GPP_F8, NONE, DEEP, NF1),
|
||||
/* I2C4_SDA */ PAD_CFG_NF(GPP_F9, NONE, DEEP, NF1),
|
||||
/* AUDIO_IRQ */ PAD_CFG_NF(GPP_F10, NONE, DEEP, NF2),
|
||||
/* I2C5_SCL */ PAD_CFG_NF(GPP_F11, NONE, DEEP, NF2),
|
||||
/* EMMC_CMD */ PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA0 */ PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA1 */ PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA2 */ PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA3 */ PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA4 */ PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA5 */ PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA6 */ PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
|
||||
/* EMMC_DATA7 */ PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
|
||||
/* EMMC_RCLK */ PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
|
||||
/* EMMC_CLK */ PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
|
||||
/* WWAN_UIM_SIM_DET */ PAD_CFG_GPI_APIC(GPP_F23, NONE, DEEP),
|
||||
/* SD_CMD */ PAD_CFG_NF(GPP_G0, NONE, DEEP, NF1),
|
||||
/* SD_DATA0 */ PAD_CFG_NF(GPP_G1, NONE, DEEP, NF1),
|
||||
/* SD_DATA1 */ PAD_CFG_NF(GPP_G2, NONE, DEEP, NF1),
|
||||
/* SD_DATA2 */ PAD_CFG_NF(GPP_G3, NONE, DEEP, NF1),
|
||||
/* SD_DATA3 */ PAD_CFG_NF(GPP_G4, NONE, DEEP, NF1),
|
||||
/* SD_CD# */ PAD_CFG_NF(GPP_G5, NONE, DEEP, NF1),
|
||||
/* SD_CLK */ PAD_CFG_NF(GPP_G6, NONE, DEEP, NF1),
|
||||
/* SD_WP */ PAD_CFG_NF(GPP_G7, NONE, DEEP, NF1),
|
||||
/* PCH_BATLOW */ PAD_CFG_NF(GPD0, NONE, DEEP, NF1),
|
||||
/* EC_PCH_ACPRESENT */ PAD_CFG_NF(GPD1, NONE, DEEP, NF1),
|
||||
/* EC_PCH_WAKE */ PAD_CFG_NF(GPD2, NONE, DEEP, NF1),
|
||||
/* EC_PCH_PWRBTN */ PAD_CFG_NF(GPD3, 20K_PU, DEEP, NF1),
|
||||
/* PM_SLP_S3# */ PAD_CFG_NF(GPD4, NONE, DEEP, NF1),
|
||||
/* PM_SLP_S4# */ PAD_CFG_NF(GPD5, NONE, DEEP, NF1),
|
||||
/* PM_SLP_SA# */ PAD_CFG_NF(GPD6, NONE, DEEP, NF1),
|
||||
PAD_CFG_NF(GPD7, NONE, DEEP, NF1),
|
||||
/* PM_SUSCLK */ PAD_CFG_NF(GPD8, NONE, DEEP, NF1),
|
||||
/* PCH_SLP_WLAN# */ PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
|
||||
/* PM_SLP_S5# */ PAD_CFG_NF(GPD10, NONE, DEEP, NF1),
|
||||
/* LANPHYC */ PAD_CFG_NF(GPD11, NONE, DEEP, NF1),
|
||||
};
|
||||
|
||||
/* Early pad configuration in romstage. */
|
||||
static const struct pad_config early_gpio_table[] = {
|
||||
/* UART0_RXD */ PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1),
|
||||
/* UART0_TXD */ PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1),
|
||||
};
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
Loading…
Reference in New Issue