google/urara: use board ID information to set up hardware
The hardware initialization is now split in basic initialization (MIPS and system PLL, system clock, SPIM, UART), and initialization of other hardware blocks (USB, I2C, ETH). The second part uses board ID information to select setup that is board specific (currently only I2C interface is selected through board ID). BRANCH=none BUG=chrome-os-partner:37593 TEST=tested on bring up board for both Urara and Concerto; to simulate the use of Concerto (I2C3) DIP SW17 was set to 0. it works with default settings on Urara Change-Id: Ic5bbf28ab42545a4fb2aa6fd30592a02ecc15cb5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f2b3db2e7f9fa898214f974ca34ea427196d2e4e Original-Change-Id: Iac9a082ad84444af1d9d9785a2d0cc3205140d15 Original-Signed-off-by: Ionela Voinescu <ionela.voinescu@imgtec.com> Original-Reviewed-on: https://chromium-review.googlesource.com/257401 Original-Reviewed-by: Vadim Bendebury <vbendeb@chromium.org> Original-Commit-Queue: Vadim Bendebury <vbendeb@chromium.org> Reviewed-on: http://review.coreboot.org/9888 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
parent
97ab4250e7
commit
2fdc61af6e
|
@ -21,11 +21,14 @@
|
|||
|
||||
#include <bootblock_common.h>
|
||||
#include <console/console.h>
|
||||
#include <halt.h>
|
||||
#include <program_loading.h>
|
||||
|
||||
void main(void)
|
||||
{
|
||||
bootblock_cpu_init();
|
||||
|
||||
/* Mainboard basic init */
|
||||
bootblock_mainboard_init();
|
||||
|
||||
#if CONFIG_BOOTBLOCK_CONSOLE
|
||||
|
@ -34,5 +37,10 @@ void main(void)
|
|||
|
||||
bootblock_mmu_init();
|
||||
|
||||
run_romstage();
|
||||
if (init_extra_hardware()) {
|
||||
printk(BIOS_ERR, "bootblock_simple: failed to init HW.\n");
|
||||
} else {
|
||||
run_romstage();
|
||||
}
|
||||
halt();
|
||||
}
|
||||
|
|
|
@ -22,6 +22,11 @@
|
|||
|
||||
#include <stdint.h>
|
||||
|
||||
struct board_hw {
|
||||
uint8_t i2c_interface;
|
||||
};
|
||||
|
||||
const struct board_hw *board_get_hw(void);
|
||||
uint8_t board_id(void);
|
||||
uint32_t ram_code(void);
|
||||
|
||||
|
|
|
@ -19,6 +19,7 @@
|
|||
# MA 02110-1301 USA
|
||||
#
|
||||
|
||||
bootblock-y += boardid.c
|
||||
ramstage-y += boardid.c
|
||||
ramstage-$(CONFIG_CHROMEOS) += chromeos.c
|
||||
ramstage-y += mainboard.c
|
||||
|
|
|
@ -34,13 +34,14 @@
|
|||
const struct bid_map {
|
||||
const char *board_name;
|
||||
uint8_t board_id;
|
||||
struct board_hw hardware;
|
||||
} board_id_map[] = {
|
||||
{"urara", URARA_BOARD_ID_BUB},
|
||||
{"buranku", URARA_BOARD_ID_BURANKU},
|
||||
{"derwent", URARA_BOARD_ID_DERWENT},
|
||||
{"jaguar", URARA_BOARD_ID_JAGUAR},
|
||||
{"kennet", URARA_BOARD_ID_KENNET},
|
||||
{"space", URARA_BOARD_ID_SPACE},
|
||||
{"urara", URARA_BOARD_ID_BUB, {0} },
|
||||
{"buranku", URARA_BOARD_ID_BURANKU, {3} },
|
||||
{"derwent", URARA_BOARD_ID_DERWENT, {3} },
|
||||
{"jaguar", URARA_BOARD_ID_JAGUAR, {3} },
|
||||
{"kennet", URARA_BOARD_ID_KENNET, {3} },
|
||||
{"space", URARA_BOARD_ID_SPACE, {3} },
|
||||
};
|
||||
|
||||
static int cached_board_id = -1;
|
||||
|
@ -91,6 +92,19 @@ static uint8_t retrieve_board_id(void)
|
|||
return 0;
|
||||
}
|
||||
|
||||
const struct board_hw *board_get_hw(void)
|
||||
{
|
||||
int i;
|
||||
uint8_t bid = board_id();
|
||||
|
||||
for (i = 0; i < ARRAY_SIZE(board_id_map); i++) {
|
||||
if (bid == board_id_map[i].board_id)
|
||||
return &(board_id_map[i].hardware);
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t board_id(void)
|
||||
{
|
||||
if (cached_board_id == -1)
|
||||
|
|
|
@ -23,6 +23,7 @@
|
|||
#include <stdint.h>
|
||||
#include <soc/clocks.h>
|
||||
#include <assert.h>
|
||||
#include <boardid.h>
|
||||
|
||||
#define PADS_FUNCTION_SELECT0_ADDR (0xB8101C00 + 0xC0)
|
||||
|
||||
|
@ -172,15 +173,10 @@ static void i2c_mfio_setup(int interface)
|
|||
write32(PADS_FUNCTION_SELECT0_ADDR, reg);
|
||||
}
|
||||
|
||||
static int init_clocks(void)
|
||||
static void bootblock_mainboard_init(void)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/*
|
||||
* Set up dividers for peripherals before setting up PLLs
|
||||
* in order to not over-clock them when enabling PLLs
|
||||
*/
|
||||
|
||||
/* System PLL divided by 2 -> 400 MHz */
|
||||
/* The same frequency will be the input frequency for the SPFI block */
|
||||
system_clk_setup(1);
|
||||
|
@ -190,40 +186,57 @@ static int init_clocks(void)
|
|||
* the values set or not by the boot ROM code */
|
||||
mips_clk_setup(0, 0);
|
||||
|
||||
/* System clock divided by 8 -> 50 MHz */
|
||||
ret = usb_clk_setup(7, 2, 7);
|
||||
/* Setup system PLL at 800 MHz */
|
||||
ret = sys_pll_setup(2, 1);
|
||||
if (ret != CLOCKS_OK)
|
||||
return ret;
|
||||
return;
|
||||
/* Setup MIPS PLL at 546 MHz */
|
||||
ret = mips_pll_setup(2, 1, 1, 21);
|
||||
if (ret != CLOCKS_OK)
|
||||
return;
|
||||
|
||||
/* System PLL divided by 7 divided by 62 -> 1.8433 Mhz */
|
||||
/* Setup SPIM1 MFIOs */
|
||||
spim1_mfio_setup();
|
||||
/* Setup UART1 clock and MFIOs
|
||||
* System PLL divided by 7 divided by 62 -> 1.8433 Mhz
|
||||
*/
|
||||
uart1_clk_setup(6, 61);
|
||||
uart1_mfio_setup();
|
||||
}
|
||||
|
||||
|
||||
static int init_extra_hardware(void)
|
||||
{
|
||||
const struct board_hw *hardware;
|
||||
|
||||
/* Obtain information about current board */
|
||||
hardware = board_get_hw();
|
||||
if (!hardware) {
|
||||
printk(BIOS_ERR, "%s: Invalid hardware information.\n",
|
||||
__func__);
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Setup USB clock
|
||||
* System clock divided by 8 -> 50 MHz
|
||||
*/
|
||||
if (usb_clk_setup(7, 2, 7) != CLOCKS_OK) {
|
||||
printk(BIOS_ERR, "%s: Failed to set up USB clock.\n",
|
||||
__func__);
|
||||
return -1;
|
||||
}
|
||||
|
||||
/* Setup I2C clocks and MFIOs
|
||||
* System PLL divided by 4 divided by 3 -> 33.33 MHz
|
||||
*/
|
||||
i2c_clk_setup(3, 2, hardware->i2c_interface);
|
||||
i2c_mfio_setup(hardware->i2c_interface);
|
||||
|
||||
/* System PLL divided by 4 divided by 3 -> 33.33 MHz */
|
||||
i2c_clk_setup(3, 2, 0);
|
||||
/* Ethernet clocks setup: ENET as clock source */
|
||||
eth_clk_setup(0, 7);
|
||||
|
||||
/* ROM clock setup: system clock divided by 2 -> 200 MHz */
|
||||
/* Hash accelerator is driven from the ROM clock */
|
||||
rom_clk_setup(1);
|
||||
|
||||
/* Setup system PLL at 800 MHz */
|
||||
ret = sys_pll_setup(2, 1);
|
||||
if (ret != CLOCKS_OK)
|
||||
return ret;
|
||||
/* Setup MIPS PLL at 546 MHz */
|
||||
ret = mips_pll_setup(2, 1, 1, 21);
|
||||
if (ret != CLOCKS_OK)
|
||||
return ret;
|
||||
return CLOCKS_OK;
|
||||
}
|
||||
|
||||
static void bootblock_mainboard_init(void)
|
||||
{
|
||||
if (!init_clocks()) {
|
||||
/* Disable GPIO on the peripheral lines */
|
||||
uart1_mfio_setup();
|
||||
spim1_mfio_setup();
|
||||
i2c_mfio_setup(0);
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
|
Loading…
Reference in New Issue