mb/google/brya/variants/osiris: Init devicetree for osiris
Init basic override devicetree based on schematics BUG=b:224423318 TEST=FW_NAME="osiris" emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ie69957b39b5c299846c64f67fb29207cf858e50e Reviewed-on: https://review.coreboot.org/c/coreboot/+/64199 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
David Wu
Tim Wawrzynczak
parent
f5319efa84
commit
305086c0f2
|
|
@ -208,6 +208,9 @@ config BOARD_GOOGLE_CRAASK
|
|||
config BOARD_GOOGLE_OSIRIS
|
||||
bool "-> Osiris"
|
||||
select BOARD_GOOGLE_BASEBOARD_BRYA
|
||||
select RT8168_GEN_ACPI_POWER_RESOURCE
|
||||
select RT8168_GET_MAC_FROM_VPD
|
||||
select RT8168_SET_LED_MODE
|
||||
|
||||
config BOARD_GOOGLE_MITHRAX
|
||||
bool "-> Mithrax"
|
||||
|
|
|
|||
|
|
@ -4,3 +4,5 @@ bootblock-y += gpio.c
|
|||
romstage-y += gpio.c
|
||||
|
||||
ramstage-y += gpio.c
|
||||
ramstage-$(CONFIG_FW_CONFIG) += variant.c
|
||||
ramstage-$(CONFIG_FW_CONFIG) += fw_config.c
|
||||
|
|
|
|||
|
|
@ -0,0 +1,87 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <bootstate.h>
|
||||
#include <console/console.h>
|
||||
#include <fw_config.h>
|
||||
#include <gpio.h>
|
||||
|
||||
static const struct pad_config dmic_enable_pads[] = {
|
||||
PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), /* DMIC_CLK0_R */
|
||||
PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), /* DMIC_DATA0_R */
|
||||
PAD_CFG_NF(GPP_R6, NONE, DEEP, NF3), /* DMIC_CLK1_R */
|
||||
PAD_CFG_NF(GPP_R7, NONE, DEEP, NF3), /* DMIC_DATA1_R */
|
||||
};
|
||||
|
||||
static const struct pad_config dmic_disable_pads[] = {
|
||||
PAD_NC(GPP_R4, NONE),
|
||||
PAD_NC(GPP_R5, NONE),
|
||||
PAD_NC(GPP_R6, NONE),
|
||||
PAD_NC(GPP_R7, NONE),
|
||||
};
|
||||
|
||||
static const struct pad_config i2s_enable_pads[] = {
|
||||
PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), /* I2S_HP_SCLK_R */
|
||||
PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), /* I2S_HP_SFRM_R */
|
||||
PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), /* I2S_PCH_TX_HP_RX_STRAP */
|
||||
PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), /* I2S_PCH_RX_HP_TX */
|
||||
PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), /* I2S_SPKR_SCLK_R */
|
||||
PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), /* I2S_SPKR_SFRM_R */
|
||||
PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), /* I2S_PCH_TX_SPKR_RX_R */
|
||||
PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), /* I2S_PCH_RX_SPKR_TX */
|
||||
};
|
||||
|
||||
static const struct pad_config i2s_disable_pads[] = {
|
||||
PAD_NC(GPP_R0, NONE),
|
||||
PAD_NC(GPP_R1, NONE),
|
||||
PAD_NC(GPP_R2, NONE),
|
||||
PAD_NC(GPP_R3, NONE),
|
||||
PAD_NC(GPP_S0, NONE),
|
||||
PAD_NC(GPP_S1, NONE),
|
||||
PAD_NC(GPP_S2, NONE),
|
||||
PAD_NC(GPP_S3, NONE),
|
||||
};
|
||||
|
||||
static const struct pad_config bt_i2s_enable_pads[] = {
|
||||
PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3), /* BT_I2S_BCLK */
|
||||
PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3), /* BT_I2S_SYNC */
|
||||
PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3), /* BT_I2S_SDO */
|
||||
PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3), /* BT_I2S_SDI */
|
||||
PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), /* SSP2_SCLK */
|
||||
PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), /* SSP2_SFRM */
|
||||
PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), /* SSP_TXD */
|
||||
PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), /* SSP_RXD */
|
||||
};
|
||||
|
||||
static const struct pad_config bt_i2s_disable_pads[] = {
|
||||
PAD_NC(GPP_VGPIO_30, NONE),
|
||||
PAD_NC(GPP_VGPIO_31, NONE),
|
||||
PAD_NC(GPP_VGPIO_32, NONE),
|
||||
PAD_NC(GPP_VGPIO_33, NONE),
|
||||
PAD_NC(GPP_VGPIO_34, NONE),
|
||||
PAD_NC(GPP_VGPIO_35, NONE),
|
||||
PAD_NC(GPP_VGPIO_36, NONE),
|
||||
PAD_NC(GPP_VGPIO_37, NONE),
|
||||
};
|
||||
|
||||
static void fw_config_handle(void *unused)
|
||||
{
|
||||
if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) {
|
||||
printk(BIOS_INFO, "Disable audio related GPIO pins.\n");
|
||||
gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads));
|
||||
gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads));
|
||||
gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads));
|
||||
return;
|
||||
}
|
||||
|
||||
if (fw_config_probe(FW_CONFIG(AUDIO, MAX98360_NAU88L25B_I2S))) {
|
||||
printk(BIOS_INFO, "Configure audio over I2S with MAX98360 NAU88L25B.\n");
|
||||
gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads));
|
||||
gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads));
|
||||
printk(BIOS_INFO, "BT offload enabled\n");
|
||||
gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads));
|
||||
} else {
|
||||
printk(BIOS_INFO, "BT offload disabled\n");
|
||||
gpio_configure_pads(bt_i2s_disable_pads, ARRAY_SIZE(bt_i2s_disable_pads));
|
||||
}
|
||||
}
|
||||
BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL);
|
||||
|
|
@ -1,6 +1,352 @@
|
|||
chip soc/intel/alderlake
|
||||
|
||||
device domain 0 on
|
||||
end
|
||||
|
||||
fw_config
|
||||
field KB_BL 0 0
|
||||
option KB_BL_ABSENT 0
|
||||
option KB_BL_PRESENT 1
|
||||
end
|
||||
field KB_MT 1 1
|
||||
option KB_MT_CROS 0
|
||||
option KB_MT_RGB 1
|
||||
end
|
||||
field AUDIO 2 3
|
||||
option AUDIO_UNKNOWN 0
|
||||
option MAX98360_NAU88L25B_I2S 1
|
||||
end
|
||||
end
|
||||
chip soc/intel/alderlake
|
||||
register "sagv" = "SaGv_Enabled"
|
||||
|
||||
register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2_C1
|
||||
register "usb2_ports[3]" = "USB2_PORT_EMPTY" # Disable M.2 WWAN
|
||||
|
||||
register "usb3_ports[3]" = "USB3_PORT_EMPTY" # Disable M.2 WWAN
|
||||
|
||||
# FIVR configurations are disabled since the board doesn't have V1p05 and Vnn
|
||||
# bypass rails implemented.
|
||||
register "ext_fivr_settings" = "{
|
||||
.configure_ext_fivr = 1,
|
||||
}"
|
||||
|
||||
# Intel Common SoC Config
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| I2C0 | Audio |
|
||||
#| I2C1 | cr50 TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
|
||||
register "common_soc_config" = "{
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 650,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.early_init = 1,
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 600,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
.rise_time_ns = 650,
|
||||
.fall_time_ns = 400,
|
||||
.data_hold_time_ns = 50,
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device ref dtt on
|
||||
chip drivers/intel/dptf
|
||||
## sensor information
|
||||
register "options.tsr[0].desc" = ""DRAM""
|
||||
register "options.tsr[1].desc" = ""Soc""
|
||||
register "options.tsr[2].desc" = ""Charger""
|
||||
|
||||
# TODO: below values are initial reference values only
|
||||
## Active Policy
|
||||
register "policies.active" = "{
|
||||
[0] = {
|
||||
.target = DPTF_CPU,
|
||||
.thresholds = {
|
||||
TEMP_PCT(85, 90),
|
||||
TEMP_PCT(75, 80),
|
||||
TEMP_PCT(68, 70),
|
||||
TEMP_PCT(62, 60),
|
||||
TEMP_PCT(55, 50),
|
||||
TEMP_PCT(50, 40),
|
||||
TEMP_PCT(40, 30),
|
||||
}
|
||||
},
|
||||
[1] = {
|
||||
.target = DPTF_TEMP_SENSOR_1,
|
||||
.thresholds = {
|
||||
TEMP_PCT(60, 90),
|
||||
TEMP_PCT(55, 80),
|
||||
TEMP_PCT(52, 70),
|
||||
TEMP_PCT(48, 60),
|
||||
TEMP_PCT(44, 50),
|
||||
TEMP_PCT(40, 40),
|
||||
TEMP_PCT(36, 30),
|
||||
}
|
||||
}
|
||||
}"
|
||||
|
||||
## Passive Policy
|
||||
register "policies.passive" = "{
|
||||
[0] = DPTF_PASSIVE(CPU, CPU, 90, 5000),
|
||||
[1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 55, 5000),
|
||||
[2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 55, 5000),
|
||||
[3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 55, 5000),
|
||||
}"
|
||||
|
||||
## Critical Policy
|
||||
register "policies.critical" = "{
|
||||
[0] = DPTF_CRITICAL(CPU, 100, SHUTDOWN),
|
||||
[1] = DPTF_CRITICAL(TEMP_SENSOR_0, 85, SHUTDOWN),
|
||||
[2] = DPTF_CRITICAL(TEMP_SENSOR_1, 85, SHUTDOWN),
|
||||
[3] = DPTF_CRITICAL(TEMP_SENSOR_2, 85, SHUTDOWN),
|
||||
}"
|
||||
|
||||
register "controls.power_limits" = "{
|
||||
.pl1 = {
|
||||
.min_power = 18000,
|
||||
.max_power = 20000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 200,
|
||||
},
|
||||
.pl2 = {
|
||||
.min_power = 43000,
|
||||
.max_power = 43000,
|
||||
.time_window_min = 28 * MSECS_PER_SEC,
|
||||
.time_window_max = 32 * MSECS_PER_SEC,
|
||||
.granularity = 1000,
|
||||
}
|
||||
}"
|
||||
|
||||
## Charger Performance Control (Control, mA)
|
||||
register "controls.charger_perf" = "{
|
||||
[0] = { 255, 1700 },
|
||||
[1] = { 24, 1500 },
|
||||
[2] = { 16, 1000 },
|
||||
[3] = { 8, 500 }
|
||||
}"
|
||||
|
||||
## Fan Performance Control (Percent, Speed, Noise, Power)
|
||||
register "controls.fan_perf" = "{
|
||||
[0] = { 90, 6700, 220, 2200, },
|
||||
[1] = { 80, 5800, 180, 1800, },
|
||||
[2] = { 70, 5000, 145, 1450, },
|
||||
[3] = { 60, 4900, 115, 1150, },
|
||||
[4] = { 50, 3838, 90, 900, },
|
||||
[5] = { 40, 2904, 55, 550, },
|
||||
[6] = { 30, 2337, 30, 300, },
|
||||
[7] = { 20, 1608, 15, 150, },
|
||||
[8] = { 10, 800, 10, 100, },
|
||||
[9] = { 0, 0, 0, 50, }
|
||||
}"
|
||||
|
||||
## Fan options
|
||||
register "options.fan.fine_grained_control" = "1"
|
||||
register "options.fan.step_size" = "2"
|
||||
|
||||
device generic 0 alias dptf_policy on end
|
||||
end
|
||||
end
|
||||
device ref tbt_pcie_rp0 off end
|
||||
device ref tbt_pcie_rp1 off end
|
||||
device ref tbt_pcie_rp2 off end
|
||||
device ref tcss_dma0 off end
|
||||
device ref tcss_dma1 off end
|
||||
device ref pcie4_0 on
|
||||
# Enable CPU PCIE RP 1 using CLK 0
|
||||
register "cpu_pcie_rp[CPU_RP(1)]" = "{
|
||||
.clk_req = 0,
|
||||
.clk_src = 0,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
end
|
||||
device ref cnvi_wifi on
|
||||
chip drivers/wifi/generic
|
||||
register "wake" = "GPE0_PME_B0"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref i2c0 on
|
||||
chip drivers/i2c/nau8825
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A23)"
|
||||
register "jkdet_enable" = "1"
|
||||
register "jkdet_pull_enable" = "0"
|
||||
register "jkdet_pull_up" = "0"
|
||||
register "jkdet_polarity" = "1" # ActiveLow
|
||||
register "vref_impedance" = "2" # 125kOhm
|
||||
register "micbias_voltage" = "6" # 2.754
|
||||
register "sar_threshold_num" = "4"
|
||||
register "sar_threshold[0]" = "0x0C"
|
||||
register "sar_threshold[1]" = "0x1C"
|
||||
register "sar_threshold[2]" = "0x38"
|
||||
register "sar_threshold[3]" = "0x60"
|
||||
register "sar_hysteresis" = "1"
|
||||
register "sar_voltage" = "6"
|
||||
register "sar_compare_time" = "0" # 500ns
|
||||
register "sar_sampling_time" = "0" # 2us
|
||||
register "short_key_debounce" = "2" # 100ms
|
||||
register "jack_insert_debounce" = "7" # 512ms
|
||||
register "jack_eject_debounce" = "7" # 512ms
|
||||
device i2c 1a on
|
||||
probe AUDIO MAX98360_NAU88L25B_I2S
|
||||
end
|
||||
end
|
||||
end #I2C0
|
||||
device ref i2c1 on
|
||||
chip drivers/i2c/tpm
|
||||
register "hid" = ""GOOG0005""
|
||||
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
|
||||
device i2c 50 on end
|
||||
end
|
||||
end
|
||||
device ref i2c5 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "wake" = "GPE0_DW2_14"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""PNP0C50""
|
||||
register "generic.desc" = ""Synaptics Touchpad""
|
||||
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||
register "generic.wake" = "GPE0_DW2_14"
|
||||
register "generic.probed" = "1"
|
||||
register "hid_desc_reg_offset" = "0x20"
|
||||
device i2c 0x2c on end
|
||||
end
|
||||
end
|
||||
device ref hda on
|
||||
chip drivers/generic/max98357a
|
||||
register "hid" = ""MX98360A""
|
||||
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
|
||||
register "sdmode_delay" = "5"
|
||||
device generic 0 on
|
||||
probe AUDIO MAX98360_NAU88L25B_I2S
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp6 off end # PCIE6 WWAN
|
||||
device ref pcie_rp7 on
|
||||
chip drivers/net
|
||||
register "wake" = "GPE0_DW0_07"
|
||||
register "led_feature" = "0xe0"
|
||||
register "customized_led0" = "0x23f"
|
||||
register "customized_led2" = "0x028"
|
||||
register "enable_aspm_l1_2" = "1"
|
||||
device pci 00.0 on end
|
||||
end
|
||||
# Enable PCIE 7 using clk 6
|
||||
register "pch_pcie_rp[PCH_RP(7)]" = "{
|
||||
.clk_src = 6,
|
||||
.clk_req = 6,
|
||||
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||
}"
|
||||
end # RTL8125 Ethernet NIC
|
||||
device ref pcie_rp8 off end # PCIE8 SD card
|
||||
device ref pcie_rp9 off end # PCIE9-12 SSD
|
||||
device ref gspi1 off end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn0 as mux_conn[0]
|
||||
use conn1 as mux_conn[1]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port1 as usb2_port
|
||||
use tcss_usb3_port1 as usb3_port
|
||||
device generic 0 alias conn0 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
use usb2_port3 as usb2_port
|
||||
use tcss_usb3_port3 as usb3_port
|
||||
device generic 1 alias conn1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref tcss_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref tcss_usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C1 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref tcss_usb3_port3 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||
device ref usb2_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C1 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
|
||||
device ref usb2_port3 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||
device ref usb2_port9 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Bluetooth""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
register "reset_gpio" =
|
||||
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||
device ref usb2_port10 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "use_custom_pld" = "true"
|
||||
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(1, 2))"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
|
|||
|
|
@ -0,0 +1,11 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
|
||||
#include <baseboard/variants.h>
|
||||
#include <chip.h>
|
||||
#include <fw_config.h>
|
||||
|
||||
void variant_update_soc_chip_config(struct soc_intel_alderlake_config *config)
|
||||
{
|
||||
config->cnvi_bt_audio_offload = fw_config_probe(FW_CONFIG(AUDIO,
|
||||
MAX98360_NAU88L25B_I2S));
|
||||
}
|
||||
Loading…
Reference in New Issue