From 309ccf74dd7c25874572c6a62ffc7042dcdadc66 Mon Sep 17 00:00:00 2001 From: Sumeet R Pawnikar Date: Sat, 9 May 2020 16:37:30 +0530 Subject: [PATCH] cannonlake: update processor power limits configuration Update processor power limit configuration parameters based on common code base support for Intel Cannonlake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on drallion system Change-Id: Iac6e6f81343fcd769619e9d7ac339430966834f6 Signed-off-by: Sumeet R Pawnikar Reviewed-on: https://review.coreboot.org/c/coreboot/+/41235 Tested-by: build bot (Jenkins) Reviewed-by: Tim Wawrzynczak --- .../drallion/variants/drallion/devicetree.cb | 8 +- .../hatch/variants/akemi/overridetree.cb | 6 +- .../hatch/variants/baseboard/devicetree.cb | 6 +- .../hatch/variants/dratini/overridetree.cb | 6 +- .../google/hatch/variants/duffy/mainboard.c | 9 +- .../hatch/variants/helios/overridetree.cb | 6 +- .../variants/helios_diskswap/overridetree.cb | 6 +- .../hatch/variants/jinlon/overridetree.cb | 6 +- .../google/hatch/variants/kaisa/mainboard.c | 9 +- .../hatch/variants/kindred/overridetree.cb | 6 +- .../hatch/variants/kohaku/overridetree.cb | 6 +- .../hatch/variants/mushu/overridetree.cb | 6 +- .../hatch/variants/nightfury/overridetree.cb | 6 +- .../hatch/variants/palkia/overridetree.cb | 6 +- .../google/hatch/variants/puff/mainboard.c | 7 +- .../sarien/variants/arcada/devicetree.cb | 8 +- .../sarien/variants/sarien/devicetree.cb | 8 +- src/mainboard/system76/lemp9/devicetree.cb | 6 +- src/soc/intel/cannonlake/Kconfig | 1 + src/soc/intel/cannonlake/chip.h | 21 +- src/soc/intel/cannonlake/cpu.c | 190 ------------------ src/soc/intel/cannonlake/fsp_params.c | 9 +- src/soc/intel/cannonlake/include/soc/cpu.h | 3 - src/soc/intel/cannonlake/systemagent.c | 8 +- 24 files changed, 98 insertions(+), 255 deletions(-) diff --git a/src/mainboard/google/drallion/variants/drallion/devicetree.cb b/src/mainboard/google/drallion/variants/drallion/devicetree.cb index 9bb09abd98..e9daf0d00d 100644 --- a/src/mainboard/google/drallion/variants/drallion/devicetree.cb +++ b/src/mainboard/google/drallion/variants/drallion/devicetree.cb @@ -42,11 +42,13 @@ chip soc/intel/cannonlake register "PchUsb2PhySusPgDisable" = "1" register "speed_shift_enable" = "1" - register "psys_pmax" = "140" register "s0ix_enable" = "1" register "dptf_enable" = "1" - register "tdp_pl1_override" = "25" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 25, + .tdp_pl2_override = 51, + .psys_pmax = 140, + }" register "Device4Enable" = "1" register "AcousticNoiseMitigation" = "1" register "SlowSlewRateForIa" = "2" diff --git a/src/mainboard/google/hatch/variants/akemi/overridetree.cb b/src/mainboard/google/hatch/variants/akemi/overridetree.cb index 27d11ccfb1..0e3972813a 100644 --- a/src/mainboard/google/hatch/variants/akemi/overridetree.cb +++ b/src/mainboard/google/hatch/variants/akemi/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb index 9894e56324..2d3156ae6b 100644 --- a/src/mainboard/google/hatch/variants/baseboard/devicetree.cb +++ b/src/mainboard/google/hatch/variants/baseboard/devicetree.cb @@ -37,8 +37,10 @@ chip soc/intel/cannonlake register "s0ix_enable" = "1" # Enable DPTF register "dptf_enable" = "1" - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "64" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 64, + }" register "Device4Enable" = "1" # Enable eDP device register "DdiPortEdp" = "1" diff --git a/src/mainboard/google/hatch/variants/dratini/overridetree.cb b/src/mainboard/google/hatch/variants/dratini/overridetree.cb index 0bd3d8ee93..0bada7d916 100644 --- a/src/mainboard/google/hatch/variants/dratini/overridetree.cb +++ b/src/mainboard/google/hatch/variants/dratini/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/duffy/mainboard.c b/src/mainboard/google/hatch/variants/duffy/mainboard.c index ef5df4ae4b..ecc0937fa8 100644 --- a/src/mainboard/google/hatch/variants/duffy/mainboard.c +++ b/src/mainboard/google/hatch/variants/duffy/mainboard.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #define GPIO_HDMI_HPD GPP_E13 @@ -86,7 +87,7 @@ static void wait_for_hpd(gpio_t gpio, long timeout) #define PSYS_IMAX 9600 #define BJ_VOLTS_MV 19000 -static void mainboard_set_power_limits(config_t *conf) +static void mainboard_set_power_limits(struct soc_power_limits_config *conf) { enum usb_chg_type type; u32 watts; @@ -123,7 +124,8 @@ static void mainboard_set_power_limits(config_t *conf) void variant_ramstage_init(void) { static const long display_timeout_ms = 3000; - config_t *conf = config_of_soc(); + struct soc_power_limits_config *soc_config; + config_t *confg = config_of_soc(); /* This is reconfigured back to whatever FSP-S expects by gpio_configure_pads. */ gpio_input(GPIO_HDMI_HPD); @@ -136,5 +138,6 @@ void variant_ramstage_init(void) wait_for_hpd(GPIO_DP_HPD, display_timeout_ms); } /* Psys_pmax needs to be setup before FSP-S */ - mainboard_set_power_limits(conf); + soc_config = &confg->power_limits_config; + mainboard_set_power_limits(soc_config); } diff --git a/src/mainboard/google/hatch/variants/helios/overridetree.cb b/src/mainboard/google/hatch/variants/helios/overridetree.cb index 94639dcabe..0d73814249 100644 --- a/src/mainboard/google/hatch/variants/helios/overridetree.cb +++ b/src/mainboard/google/hatch/variants/helios/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "64" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 64, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb b/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb index 8a3745d174..0422a57bd3 100644 --- a/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb +++ b/src/mainboard/google/hatch/variants/helios_diskswap/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "13" - register "tdp_pl2_override" = "64" + register "power_limits_config" = "{ + .tdp_pl1_override = 13, + .tdp_pl2_override = 64, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/jinlon/overridetree.cb b/src/mainboard/google/hatch/variants/jinlon/overridetree.cb index 546267011d..a3bb782a36 100644 --- a/src/mainboard/google/hatch/variants/jinlon/overridetree.cb +++ b/src/mainboard/google/hatch/variants/jinlon/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/kaisa/mainboard.c b/src/mainboard/google/hatch/variants/kaisa/mainboard.c index ef5df4ae4b..ecc0937fa8 100644 --- a/src/mainboard/google/hatch/variants/kaisa/mainboard.c +++ b/src/mainboard/google/hatch/variants/kaisa/mainboard.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #define GPIO_HDMI_HPD GPP_E13 @@ -86,7 +87,7 @@ static void wait_for_hpd(gpio_t gpio, long timeout) #define PSYS_IMAX 9600 #define BJ_VOLTS_MV 19000 -static void mainboard_set_power_limits(config_t *conf) +static void mainboard_set_power_limits(struct soc_power_limits_config *conf) { enum usb_chg_type type; u32 watts; @@ -123,7 +124,8 @@ static void mainboard_set_power_limits(config_t *conf) void variant_ramstage_init(void) { static const long display_timeout_ms = 3000; - config_t *conf = config_of_soc(); + struct soc_power_limits_config *soc_config; + config_t *confg = config_of_soc(); /* This is reconfigured back to whatever FSP-S expects by gpio_configure_pads. */ gpio_input(GPIO_HDMI_HPD); @@ -136,5 +138,6 @@ void variant_ramstage_init(void) wait_for_hpd(GPIO_DP_HPD, display_timeout_ms); } /* Psys_pmax needs to be setup before FSP-S */ - mainboard_set_power_limits(conf); + soc_config = &confg->power_limits_config; + mainboard_set_power_limits(soc_config); } diff --git a/src/mainboard/google/hatch/variants/kindred/overridetree.cb b/src/mainboard/google/hatch/variants/kindred/overridetree.cb index 8afae3968b..43fdfbf5fa 100644 --- a/src/mainboard/google/hatch/variants/kindred/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kindred/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb index 08bbb2a9b0..df18277408 100644 --- a/src/mainboard/google/hatch/variants/kohaku/overridetree.cb +++ b/src/mainboard/google/hatch/variants/kohaku/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "8" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 8, + .tdp_pl2_override = 51, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/mushu/overridetree.cb b/src/mainboard/google/hatch/variants/mushu/overridetree.cb index 7bd1fac4e8..db86d68204 100644 --- a/src/mainboard/google/hatch/variants/mushu/overridetree.cb +++ b/src/mainboard/google/hatch/variants/mushu/overridetree.cb @@ -24,8 +24,10 @@ chip soc/intel/cannonlake register "FastPkgCRampDisableGt" = "1" register "FastPkgCRampDisableSa" = "1" - register "tdp_pl1_override" = "25" - register "tdp_pl2_override" = "44" + register "power_limits_config" = "{ + .tdp_pl1_override = 25, + .tdp_pl2_override = 44, + }" # Intel Common SoC Config #+-------------------+---------------------------+ diff --git a/src/mainboard/google/hatch/variants/nightfury/overridetree.cb b/src/mainboard/google/hatch/variants/nightfury/overridetree.cb index 2c759bc4bb..82f80a96f5 100644 --- a/src/mainboard/google/hatch/variants/nightfury/overridetree.cb +++ b/src/mainboard/google/hatch/variants/nightfury/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/palkia/overridetree.cb b/src/mainboard/google/hatch/variants/palkia/overridetree.cb index bce58011d3..31017bc01d 100644 --- a/src/mainboard/google/hatch/variants/palkia/overridetree.cb +++ b/src/mainboard/google/hatch/variants/palkia/overridetree.cb @@ -1,6 +1,8 @@ chip soc/intel/cannonlake - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "64" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 64, + }" register "SerialIoDevMode" = "{ [PchSerialIoIndexI2C0] = PchSerialIoPci, diff --git a/src/mainboard/google/hatch/variants/puff/mainboard.c b/src/mainboard/google/hatch/variants/puff/mainboard.c index ef5df4ae4b..b5bc699ca0 100644 --- a/src/mainboard/google/hatch/variants/puff/mainboard.c +++ b/src/mainboard/google/hatch/variants/puff/mainboard.c @@ -6,6 +6,7 @@ #include #include #include +#include #include #define GPIO_HDMI_HPD GPP_E13 @@ -86,7 +87,7 @@ static void wait_for_hpd(gpio_t gpio, long timeout) #define PSYS_IMAX 9600 #define BJ_VOLTS_MV 19000 -static void mainboard_set_power_limits(config_t *conf) +static void mainboard_set_power_limits(struct soc_power_limits_config *conf) { enum usb_chg_type type; u32 watts; @@ -123,6 +124,7 @@ static void mainboard_set_power_limits(config_t *conf) void variant_ramstage_init(void) { static const long display_timeout_ms = 3000; + struct soc_power_limits_config *soc_config; config_t *conf = config_of_soc(); /* This is reconfigured back to whatever FSP-S expects by gpio_configure_pads. */ @@ -136,5 +138,6 @@ void variant_ramstage_init(void) wait_for_hpd(GPIO_DP_HPD, display_timeout_ms); } /* Psys_pmax needs to be setup before FSP-S */ - mainboard_set_power_limits(conf); + soc_config = &conf->power_limits_config; + mainboard_set_power_limits(soc_config); } diff --git a/src/mainboard/google/sarien/variants/arcada/devicetree.cb b/src/mainboard/google/sarien/variants/arcada/devicetree.cb index d1d9b038b2..a84e73a826 100644 --- a/src/mainboard/google/sarien/variants/arcada/devicetree.cb +++ b/src/mainboard/google/sarien/variants/arcada/devicetree.cb @@ -31,12 +31,14 @@ chip soc/intel/cannonlake register "PchUsb2PhySusPgDisable" = "1" register "speed_shift_enable" = "1" - register "psys_pmax" = "140" register "s0ix_enable" = "1" register "dptf_enable" = "1" register "satapwroptimize" = "1" - register "tdp_pl1_override" = "25" - register "tdp_pl2_override" = "51" + register "power_limits_config" = "{ + .tdp_pl1_override = 25, + .tdp_pl2_override = 51, + .psys_pmax = 140, + }" register "Device4Enable" = "1" register "AcousticNoiseMitigation" = "1" register "SlowSlewRateForIa" = "2" diff --git a/src/mainboard/google/sarien/variants/sarien/devicetree.cb b/src/mainboard/google/sarien/variants/sarien/devicetree.cb index b2aa8d5e8d..09b4240993 100644 --- a/src/mainboard/google/sarien/variants/sarien/devicetree.cb +++ b/src/mainboard/google/sarien/variants/sarien/devicetree.cb @@ -42,9 +42,11 @@ chip soc/intel/cannonlake register "SlowSlewRateForGt" = "2" register "SlowSlewRateForSa" = "2" register "SlowSlewRateForFivr" = "2" - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "51" - register "psys_pmax" = "136" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 51, + .psys_pmax = 136, + }" register "Device4Enable" = "1" # Enable eDP device register "DdiPortEdp" = "1" diff --git a/src/mainboard/system76/lemp9/devicetree.cb b/src/mainboard/system76/lemp9/devicetree.cb index 6cf0fff9de..4c6c866440 100644 --- a/src/mainboard/system76/lemp9/devicetree.cb +++ b/src/mainboard/system76/lemp9/devicetree.cb @@ -19,8 +19,10 @@ chip soc/intel/cannonlake # CPU (soc/intel/cannonlake/cpu.c) # Power limit - register "tdp_pl1_override" = "15" - register "tdp_pl2_override" = "25" + register "power_limits_config" = "{ + .tdp_pl1_override = 15, + .tdp_pl2_override = 25, + }" # Enable "Intel Speed Shift Technology" register "speed_shift_enable" = "1" diff --git a/src/soc/intel/cannonlake/Kconfig b/src/soc/intel/cannonlake/Kconfig index 6a86576c2b..7a56d0d42d 100644 --- a/src/soc/intel/cannonlake/Kconfig +++ b/src/soc/intel/cannonlake/Kconfig @@ -103,6 +103,7 @@ config CPU_SPECIFIC_OPTIONS select SOC_INTEL_COMMON_PCH_BASE select SOC_INTEL_COMMON_NHLT select SOC_INTEL_COMMON_RESET + select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT select SSE2 select SUPPORT_CPU_UCODE_IN_CBFS select TSC_MONOTONIC_TIMER diff --git a/src/soc/intel/cannonlake/chip.h b/src/soc/intel/cannonlake/chip.h index f6ec7ce7cb..a30f732ce3 100644 --- a/src/soc/intel/cannonlake/chip.h +++ b/src/soc/intel/cannonlake/chip.h @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -32,6 +33,9 @@ struct soc_intel_cannonlake_config { /* Common struct containing soc config data required by common code */ struct soc_intel_common_config common_soc_config; + /* Common struct containing power limits configuration information */ + struct soc_power_limits_config power_limits_config; + /* Gpio group routed to each dword of the GPE0 block. Values are * of the form GPP_[A:G] or GPD. */ uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */ @@ -231,23 +235,6 @@ struct soc_intel_cannonlake_config { /* Enables support for Teton Glacier hybrid storage device */ uint8_t TetonGlacierMode; - /* PL1 Override value in Watts */ - uint32_t tdp_pl1_override; - /* PL2 Override value in Watts */ - uint32_t tdp_pl2_override; - /* SysPL2 Value in Watts */ - uint32_t tdp_psyspl2; - /* SysPL3 Value in Watts */ - uint32_t tdp_psyspl3; - /* SysPL3 window size */ - uint32_t tdp_psyspl3_time; - /* SysPL3 duty cycle */ - uint32_t tdp_psyspl3_dutycycle; - /* PL4 Value in Watts */ - uint32_t tdp_pl4; - /* Estimated maximum platform power in Watts */ - uint16_t psys_pmax; - /* Intel Speed Shift Technology */ uint8_t speed_shift_enable; /* Enable VR specific mailbox command diff --git a/src/soc/intel/cannonlake/cpu.c b/src/soc/intel/cannonlake/cpu.c index 2f1a08020c..5b329eef3c 100644 --- a/src/soc/intel/cannonlake/cpu.c +++ b/src/soc/intel/cannonlake/cpu.c @@ -22,196 +22,6 @@ #include "chip.h" -/* Convert time in seconds to POWER_LIMIT_1_TIME MSR value */ -static const u8 power_limit_time_sec_to_msr[] = { - [0] = 0x00, - [1] = 0x0a, - [2] = 0x0b, - [3] = 0x4b, - [4] = 0x0c, - [5] = 0x2c, - [6] = 0x4c, - [7] = 0x6c, - [8] = 0x0d, - [10] = 0x2d, - [12] = 0x4d, - [14] = 0x6d, - [16] = 0x0e, - [20] = 0x2e, - [24] = 0x4e, - [28] = 0x6e, - [32] = 0x0f, - [40] = 0x2f, - [48] = 0x4f, - [56] = 0x6f, - [64] = 0x10, - [80] = 0x30, - [96] = 0x50, - [112] = 0x70, - [128] = 0x11, -}; - -/* Convert POWER_LIMIT_1_TIME MSR value to seconds */ -static const u8 power_limit_time_msr_to_sec[] = { - [0x00] = 0, - [0x0a] = 1, - [0x0b] = 2, - [0x4b] = 3, - [0x0c] = 4, - [0x2c] = 5, - [0x4c] = 6, - [0x6c] = 7, - [0x0d] = 8, - [0x2d] = 10, - [0x4d] = 12, - [0x6d] = 14, - [0x0e] = 16, - [0x2e] = 20, - [0x4e] = 24, - [0x6e] = 28, - [0x0f] = 32, - [0x2f] = 40, - [0x4f] = 48, - [0x6f] = 56, - [0x10] = 64, - [0x30] = 80, - [0x50] = 96, - [0x70] = 112, - [0x11] = 128, -}; - -/* - * Configure processor power limits if possible - * This must be done AFTER set of BIOS_RESET_CPL - */ -void set_power_limits(u8 power_limit_1_time) -{ - msr_t msr = rdmsr(MSR_PLATFORM_INFO); - msr_t limit; - unsigned int power_unit; - unsigned int tdp, min_power, max_power, max_time, tdp_pl2, tdp_pl1; - u8 power_limit_1_val; - - config_t *conf = config_of_soc(); - - if (power_limit_1_time >= ARRAY_SIZE(power_limit_time_sec_to_msr)) - power_limit_1_time = ARRAY_SIZE(power_limit_time_sec_to_msr) - 1; - - if (!(msr.lo & PLATFORM_INFO_SET_TDP)) - return; - - /* Get units */ - msr = rdmsr(MSR_PKG_POWER_SKU_UNIT); - power_unit = 1 << (msr.lo & 0xf); - - /* Get power defaults for this SKU */ - msr = rdmsr(MSR_PKG_POWER_SKU); - tdp = msr.lo & 0x7fff; - min_power = (msr.lo >> 16) & 0x7fff; - max_power = msr.hi & 0x7fff; - max_time = (msr.hi >> 16) & 0x7f; - - printk(BIOS_DEBUG, "CPU TDP: %u Watts\n", tdp / power_unit); - - if (power_limit_time_msr_to_sec[max_time] > power_limit_1_time) - power_limit_1_time = power_limit_time_msr_to_sec[max_time]; - - if (min_power > 0 && tdp < min_power) - tdp = min_power; - - if (max_power > 0 && tdp > max_power) - tdp = max_power; - - power_limit_1_val = power_limit_time_sec_to_msr[power_limit_1_time]; - - /* Set long term power limit to TDP */ - limit.lo = 0; - tdp_pl1 = ((conf->tdp_pl1_override == 0) ? - tdp : (conf->tdp_pl1_override * power_unit)); - limit.lo |= (tdp_pl1 & PKG_POWER_LIMIT_MASK); - - /* Set PL1 Pkg Power clamp bit */ - limit.lo |= PKG_POWER_LIMIT_CLAMP; - - limit.lo |= PKG_POWER_LIMIT_EN; - limit.lo |= (power_limit_1_val & PKG_POWER_LIMIT_TIME_MASK) << - PKG_POWER_LIMIT_TIME_SHIFT; - - /* Set short term power limit to 1.25 * TDP if no config given */ - limit.hi = 0; - tdp_pl2 = (conf->tdp_pl2_override == 0) ? - (tdp * 125) / 100 : (conf->tdp_pl2_override * power_unit); - printk(BIOS_DEBUG, "CPU PL2 = %u Watts\n", tdp_pl2 / power_unit); - limit.hi |= (tdp_pl2) & PKG_POWER_LIMIT_MASK; - limit.hi |= PKG_POWER_LIMIT_CLAMP; - limit.hi |= PKG_POWER_LIMIT_EN; - - /* Power limit 2 time is only programmable on server SKU */ - wrmsr(MSR_PKG_POWER_LIMIT, limit); - - /* Set PL2 power limit values in MCHBAR and disable PL1 */ - MCHBAR32(MCH_PKG_POWER_LIMIT_LO) = limit.lo & (~(PKG_POWER_LIMIT_EN)); - MCHBAR32(MCH_PKG_POWER_LIMIT_HI) = limit.hi; - - /* Set PsysPl2 */ - if (conf->tdp_psyspl2) { - limit = rdmsr(MSR_PLATFORM_POWER_LIMIT); - limit.hi = 0; - printk(BIOS_DEBUG, "CPU PsysPL2 = %u Watts\n", - conf->tdp_psyspl2); - limit.hi |= (conf->tdp_psyspl2 * power_unit) & - PKG_POWER_LIMIT_MASK; - limit.hi |= PKG_POWER_LIMIT_CLAMP; - limit.hi |= PKG_POWER_LIMIT_EN; - - wrmsr(MSR_PLATFORM_POWER_LIMIT, limit); - } - - /* Set PsysPl3 */ - if (conf->tdp_psyspl3) { - limit = rdmsr(MSR_PL3_CONTROL); - limit.lo = 0; - printk(BIOS_DEBUG, "CPU PsysPL3 = %u Watts\n", - conf->tdp_psyspl3); - limit.lo |= (conf->tdp_psyspl3 * power_unit) & - PKG_POWER_LIMIT_MASK; - /* Enable PsysPl3 */ - limit.lo |= PKG_POWER_LIMIT_EN; - /* set PsysPl3 time window */ - limit.lo |= (conf->tdp_psyspl3_time & - PKG_POWER_LIMIT_TIME_MASK) << - PKG_POWER_LIMIT_TIME_SHIFT; - /* set PsysPl3 duty cycle */ - limit.lo |= (conf->tdp_psyspl3_dutycycle & - PKG_POWER_LIMIT_DUTYCYCLE_MASK) << - PKG_POWER_LIMIT_DUTYCYCLE_SHIFT; - wrmsr(MSR_PL3_CONTROL, limit); - } - - /* Set Pl4 */ - if (conf->tdp_pl4) { - limit = rdmsr(MSR_VR_CURRENT_CONFIG); - limit.lo = 0; - printk(BIOS_DEBUG, "CPU PL4 = %u Watts\n", - conf->tdp_pl4); - limit.lo |= (conf->tdp_pl4 * power_unit) & - PKG_POWER_LIMIT_MASK; - wrmsr(MSR_VR_CURRENT_CONFIG, limit); - } - - /* Set DDR RAPL power limit by copying from MMIO to MSR */ - msr.lo = MCHBAR32(MCH_DDR_POWER_LIMIT_LO); - msr.hi = MCHBAR32(MCH_DDR_POWER_LIMIT_HI); - wrmsr(MSR_DDR_RAPL_LIMIT, msr); - - /* Use nominal TDP values for CPUs with configurable TDP */ - if (cpu_config_tdp_levels()) { - limit.hi = 0; - limit.lo = cpu_get_tdp_nominal_ratio(); - wrmsr(MSR_TURBO_ACTIVATION_RATIO, limit); - } -} - static void soc_fsp_load(void) { fsps_load(romstage_handoff_is_resume()); diff --git a/src/soc/intel/cannonlake/fsp_params.c b/src/soc/intel/cannonlake/fsp_params.c index b7e9ad8d8b..8788838c3f 100644 --- a/src/soc/intel/cannonlake/fsp_params.c +++ b/src/soc/intel/cannonlake/fsp_params.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include @@ -152,11 +153,13 @@ void platform_fsp_silicon_init_params_cb(FSPS_UPD *supd) mainboard_silicon_init_params(params); + const struct soc_power_limits_config *soc_config; + soc_config = &config->power_limits_config; /* Set PsysPmax if it is available from DT */ - if (config->psys_pmax) { - printk(BIOS_DEBUG, "psys_pmax = %dW\n", config->psys_pmax); + if (soc_config->psys_pmax) { + printk(BIOS_DEBUG, "psys_pmax = %dW\n", soc_config->psys_pmax); /* PsysPmax is in unit of 1/8 Watt */ - tconfig->PsysPmax = config->psys_pmax * 8; + tconfig->PsysPmax = soc_config->psys_pmax * 8; } /* Unlock upper 8 bytes of RTC RAM */ diff --git a/src/soc/intel/cannonlake/include/soc/cpu.h b/src/soc/intel/cannonlake/include/soc/cpu.h index ea30755069..b356d3a9b8 100644 --- a/src/soc/intel/cannonlake/include/soc/cpu.h +++ b/src/soc/intel/cannonlake/include/soc/cpu.h @@ -31,7 +31,4 @@ C_STATE_LATENCY_MICRO_SECONDS(C_STATE_LATENCY_CONTROL_ ##reg## _LIMIT, \ (IRTL_1024_NS >> 10)) -/* Configure power limits for turbo mode */ -void set_power_limits(u8 power_limit_1_time); - #endif diff --git a/src/soc/intel/cannonlake/systemagent.c b/src/soc/intel/cannonlake/systemagent.c index a041c0e154..c225651649 100644 --- a/src/soc/intel/cannonlake/systemagent.c +++ b/src/soc/intel/cannonlake/systemagent.c @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -57,6 +58,9 @@ void soc_add_fixed_mmio_resources(struct device *dev, int *index) */ void soc_systemagent_init(struct device *dev) { + struct soc_power_limits_config *soc_config; + config_t *config; + /* Enable Power Aware Interrupt Routing */ enable_power_aware_intr(); @@ -65,5 +69,7 @@ void soc_systemagent_init(struct device *dev) /* Configure turbo power limits 1ms after reset complete bit */ mdelay(1); - set_power_limits(28); + config = config_of_soc(); + soc_config = &config->power_limits_config; + set_power_limits(MOBILE_SKU_PL1_TIME_SEC, soc_config); }