Kconfig: Remove ACPI_SSDTX_NUM.

Its scope is limited to a single mainboard and is only to go through ifdef.
Kill it and move the value to the code.

Change-Id: I76a87e2790d57dee8f37b51e33d0689fffd3a59d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/7135
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

src/Kconfig

@@ -356,10 +356,6 @@ config HAVE_ACPI_SLIC
 	bool
 	default n
 
-config ACPI_SSDTX_NUM
-	int
-	default 0
-
 config HAVE_HARD_RESET
 	bool
 	default n

src/mainboard/amd/olivehill/Kconfig

@@ -56,10 +56,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 11
 
-config ACPI_SSDTX_NUM
-	int
-	default 0
-
 config ONBOARD_VGA_IS_PRIMARY
 	bool
 	default y

src/mainboard/amd/olivehillplus/Kconfig

@@ -56,10 +56,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 11
 
-config ACPI_SSDTX_NUM
-	int
-	default 0
-
 config ONBOARD_VGA_IS_PRIMARY
 	bool
 	default y

src/mainboard/amd/serengeti_cheetah/Kconfig

@@ -71,8 +71,4 @@ config IRQ_SLOT_COUNT
 	int
 	default 11
 
-config ACPI_SSDTX_NUM
-	int
-	default 4
-
 endif # BOARD_AMD_SERENGETI_CHEETAH

src/mainboard/amd/serengeti_cheetah/acpi_tables.c

@@ -136,8 +136,6 @@ unsigned long mainboard_write_acpi_tables(unsigned long start, acpi_rsdp_t *rsdp
 	start = ALIGN(start, 16);
 	current = start;
 
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-
 	//same htio, but different position? We may have to copy, change HCIN, and recalculate the checknum and add_table
 
 	for(i=1;i<sysconf.hc_possible_num;i++) {  // 0: is hc sblink
@@ -173,7 +171,6 @@ unsigned long mainboard_write_acpi_tables(unsigned long start, acpi_rsdp_t *rsdp
 		ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
 		acpi_add_table(rsdp, ssdtx);
 	}
-#endif
 
 	return current;
 }

src/mainboard/amd/serengeti_cheetah/readme_acpi.txt

@@ -12,7 +12,7 @@ Change dsdt.asl, according to MB layout
 
 Change acpi_tables.c
 	sbdn: Real SB device Num. for 8111 =3 or 1 depend if 8131 presents.  ---- Actually you don't need to change it, it is coreboot run-time configurable now.
-	if there is HT-IO board, need to adjust SSDTX_NUM...., and preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed
+	if there is HT-IO board, need to preset pci1234 array. acpi_tables.c will decide to put the SSDT on the RSDT or not according if the HT-IO board is installed
 
 Regarding pci bridge apic and pic
 	need to modify entries amd8111.asl and amd8131.asl and amd8151.asl.... acording to your MB laybout, it is like that in mptable.c

src/mainboard/amd/serengeti_cheetah_fam10/Kconfig

@@ -62,8 +62,4 @@ config AMD_UCODE_PATCH_FILE
 	string
 	default "mc_patch_01000095.h"
 
-config ACPI_SSDTX_NUM
-	int
-	default 5
-
 endif # BOARD_AMD_SERENGETI_CHEETAH_FAM10

src/mainboard/amd/serengeti_cheetah_fam10/acpi_tables.c

@@ -30,12 +30,10 @@
 #include "mb_sysconf.h"
 #include "mainboard.h"
 
-#if CONFIG_ACPI_SSDTX_NUM >= 1
 extern const unsigned char AmlCode_ssdt2[];
 extern const unsigned char AmlCode_ssdt3[];
 extern const unsigned char AmlCode_ssdt4[];
 extern const unsigned char AmlCode_ssdt5[];
-#endif
 
 unsigned long acpi_fill_madt(unsigned long current)
 {
@@ -143,8 +141,6 @@ unsigned long mainboard_write_acpi_tables(unsigned long current,
 
 	get_bus_conf(); //it will get sblk, pci1234, hcdn, and sbdn
 
-#if CONFIG_ACPI_SSDTX_NUM >= 1
-
 	/* same htio, but different possition? We may have to copy,
 	change HCIN, and recalculate the checknum and add_table */
 
@@ -182,7 +178,6 @@ unsigned long mainboard_write_acpi_tables(unsigned long current,
 		ssdtx->checksum = acpi_checksum((u8 *)ssdtx, ssdtx->length);
 		acpi_add_table(rsdp, ssdtx);
 	}
-#endif
 
 	return current;
 }

src/mainboard/asrock/imb-a180/Kconfig

@@ -57,10 +57,6 @@ config IRQ_SLOT_COUNT
 	int
 	default 11
 
-config ACPI_SSDTX_NUM
-	int
-	default 0
-
 config ONBOARD_VGA_IS_PRIMARY
 	bool
 	default y

src/mainboard/iwill/dk8_htx/Kconfig

@@ -54,8 +54,4 @@ config IRQ_SLOT_COUNT
 	int
 	default 11
 
-config ACPI_SSDTX_NUM
-	int
-	default 5
-
 endif # BOARD_IWILL_DK8_HTX

src/northbridge/amd/amdfam10/get_pci1234.c

@@ -49,8 +49,7 @@
  * reset HC_POSSIBLE_NUM and update ssdt.dsl (hcdn, hclk)
  *
  * Put all the possible ht node/link to the list tp pci1234[] in  get_bus_conf.c
- * on MB dir. Also, don't forget to increase the CONFIG_ACPI_SSDTX_NUM etc if you have
- * too much SSDT. How about co-processor on socket 1 on 2 way system.
+ * on MB dir. How about co-processor on socket 1 on 2 way system.
  * or socket 2, and socket3 on 4 way system? treat that as one hc too!
  *
  */

src/northbridge/amd/amdk8/get_sblk_pci1234.c

@@ -176,9 +176,6 @@ unsigned node_link_to_bus(unsigned node, unsigned link)
  * Just put all the possible HT Node/link to the list tp pci1234[] in
  * src/mainboard/<vendor>/<mainboard>get_bus_conf.c
  *
- * Also don't forget to increase the CONFIG_ACPI_SSDTX_NUM etc (FIXME what else) if
- * you have too many SSDTs
- *
  * What about co-processor in socket 1 on a 2 way system? Or socket 2 and
  * socket 3 on a 4 way system? Treat that as an HC, too!
  *