Add Tyan S2912 platform with AMD Family 10 support.
Thanks Arne. Good job. Signed-off-by: Arne Georg Gleditsch <arne.gleditsch@numascale.com> Acked-by: Marc Jones <marc.jones@amd.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3526 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Arne Georg Gleditsch
Marc Jones
parent
34b9f867cd
commit
33e6d5dec6
|
|
@ -0,0 +1,387 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007 AMD
|
||||
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
##
|
||||
## Compute the location and size of where this firmware image
|
||||
## (coreboot plus bootloader) will live in the boot rom chip.
|
||||
##
|
||||
if USE_FAILOVER_IMAGE
|
||||
default ROM_SECTION_SIZE = FAILOVER_SIZE
|
||||
default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE )
|
||||
else
|
||||
if USE_FALLBACK_IMAGE
|
||||
default ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
|
||||
else
|
||||
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE )
|
||||
default ROM_SECTION_OFFSET = 0
|
||||
end
|
||||
end
|
||||
|
||||
##
|
||||
## Compute the start location and size size of
|
||||
## The coreboot bootloader.
|
||||
##
|
||||
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
|
||||
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||
|
||||
##
|
||||
## Compute where this copy of coreboot will start in the boot rom
|
||||
##
|
||||
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
|
||||
|
||||
##
|
||||
## Compute a range of ROM that can cached to speed up coreboot,
|
||||
## execution speed.
|
||||
##
|
||||
## XIP_ROM_SIZE must be a power of 2.
|
||||
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||
##
|
||||
default XIP_ROM_SIZE=65536
|
||||
|
||||
if USE_FAILOVER_IMAGE
|
||||
default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
|
||||
else
|
||||
if USE_FALLBACK_IMAGE
|
||||
default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE)
|
||||
else
|
||||
default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE)
|
||||
end
|
||||
end
|
||||
|
||||
arch i386 end
|
||||
|
||||
##
|
||||
## Build the objects we have code for in this directory.
|
||||
##
|
||||
|
||||
driver mainboard.o
|
||||
#needed by irq_tables and mptable and acpi_tables
|
||||
object get_bus_conf.o
|
||||
|
||||
if HAVE_MP_TABLE object mptable.o end
|
||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
||||
#object reset.o
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
makedefine CACHE_AS_RAM_AUTO_C:=cache_as_ram_auto.c
|
||||
|
||||
if CONFIG_USE_INIT
|
||||
makerule ./cache_as_ram_auto.o
|
||||
depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
|
||||
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
|
||||
end
|
||||
else
|
||||
makerule ./cache_as_ram_auto.inc
|
||||
depends "$(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) option_table.h"
|
||||
action "$(CC) -I$(TOP)/src -I. $(CFLAGS) $(CPPFLAGS) $(MAINBOARD)/$(CACHE_AS_RAM_AUTO_C) -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
|
||||
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
|
||||
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
|
||||
end
|
||||
end
|
||||
|
||||
end
|
||||
|
||||
if USE_FAILOVER_IMAGE
|
||||
else
|
||||
if CONFIG_AP_CODE_IN_CAR
|
||||
makerule ./apc_auto.o
|
||||
depends "$(MAINBOARD)/apc_auto.c option_table.h"
|
||||
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/apc_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
|
||||
end
|
||||
ldscript /arch/i386/init/ldscript_apc.lb
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
##
|
||||
## Build our 16 bit and 32 bit coreboot entry code
|
||||
##
|
||||
if HAVE_FAILOVER_BOOT
|
||||
if USE_FAILOVER_IMAGE
|
||||
mainboardinit cpu/x86/16bit/entry16.inc
|
||||
ldscript /cpu/x86/16bit/entry16.lds
|
||||
end
|
||||
else
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/x86/16bit/entry16.inc
|
||||
ldscript /cpu/x86/16bit/entry16.lds
|
||||
end
|
||||
end
|
||||
|
||||
mainboardinit cpu/x86/32bit/entry32.inc
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
if CONFIG_USE_INIT
|
||||
ldscript /cpu/x86/32bit/entry32.lds
|
||||
end
|
||||
|
||||
if CONFIG_USE_INIT
|
||||
ldscript /cpu/amd/car/cache_as_ram.lds
|
||||
end
|
||||
end
|
||||
|
||||
|
||||
##
|
||||
## Build our reset vector (This is where coreboot is entered)
|
||||
##
|
||||
if HAVE_FAILOVER_BOOT
|
||||
if USE_FAILOVER_IMAGE
|
||||
mainboardinit cpu/x86/16bit/reset16.inc
|
||||
ldscript /cpu/x86/16bit/reset16.lds
|
||||
else
|
||||
mainboardinit cpu/x86/32bit/reset32.inc
|
||||
ldscript /cpu/x86/32bit/reset32.lds
|
||||
end
|
||||
else
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/x86/16bit/reset16.inc
|
||||
ldscript /cpu/x86/16bit/reset16.lds
|
||||
else
|
||||
mainboardinit cpu/x86/32bit/reset32.inc
|
||||
ldscript /cpu/x86/32bit/reset32.lds
|
||||
end
|
||||
end
|
||||
|
||||
##
|
||||
## Include an id string (For safe flashing)
|
||||
##
|
||||
mainboardinit southbridge/nvidia/mcp55/id.inc
|
||||
ldscript /southbridge/nvidia/mcp55/id.lds
|
||||
|
||||
##
|
||||
## ROMSTRAP table for MCP55
|
||||
##
|
||||
if HAVE_FAILOVER_BOOT
|
||||
if USE_FAILOVER_IMAGE
|
||||
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
|
||||
ldscript /southbridge/nvidia/mcp55/romstrap.lds
|
||||
end
|
||||
else
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit southbridge/nvidia/mcp55/romstrap.inc
|
||||
ldscript /southbridge/nvidia/mcp55/romstrap.lds
|
||||
end
|
||||
end
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
##
|
||||
## Setup Cache-As-Ram
|
||||
##
|
||||
mainboardinit cpu/amd/car/cache_as_ram.inc
|
||||
end
|
||||
|
||||
###
|
||||
### This is the early phase of coreboot startup
|
||||
### Things are delicate and we test to see if we should
|
||||
### failover to another image.
|
||||
###
|
||||
if HAVE_FAILOVER_BOOT
|
||||
if USE_FAILOVER_IMAGE
|
||||
if USE_DCACHE_RAM
|
||||
ldscript /arch/i386/lib/failover_failover.lds
|
||||
end
|
||||
end
|
||||
else
|
||||
if USE_FALLBACK_IMAGE
|
||||
if USE_DCACHE_RAM
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
if USE_DCACHE_RAM
|
||||
|
||||
if CONFIG_USE_INIT
|
||||
initobject cache_as_ram_auto.o
|
||||
else
|
||||
mainboardinit ./cache_as_ram_auto.inc
|
||||
end
|
||||
end
|
||||
|
||||
##
|
||||
## Include the secondary Configuration files
|
||||
##
|
||||
if CONFIG_CHIP_NAME
|
||||
config chip.h
|
||||
end
|
||||
|
||||
dir /southbridge/nvidia/mcp55
|
||||
|
||||
chip northbridge/amd/amdfam10/root_complex
|
||||
device apic_cluster 0 on
|
||||
chip cpu/amd/socket_F_1207
|
||||
device apic 0 on end
|
||||
end
|
||||
end
|
||||
device pci_domain 0 on
|
||||
chip northbridge/amd/amdfam10 #mc0
|
||||
device pci 18.0 on end
|
||||
device pci 18.0 on end
|
||||
device pci 18.0 on
|
||||
# SB on link 2.0.
|
||||
chip southbridge/nvidia/mcp55
|
||||
device pci 0.0 on end # HT
|
||||
device pci 1.0 on # LPC
|
||||
chip superio/winbond/w83627hf
|
||||
device pnp 2e.0 off # Floppy
|
||||
io 0x60 = 0x3f0
|
||||
irq 0x70 = 6
|
||||
drq 0x74 = 2
|
||||
end
|
||||
device pnp 2e.1 off # Parallel Port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 7
|
||||
end
|
||||
device pnp 2e.2 on # Com1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 on # Com2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.5 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
irq 0x72 = 12
|
||||
end
|
||||
device pnp 2e.6 off # SFI
|
||||
io 0x62 = 0x100
|
||||
end
|
||||
device pnp 2e.7 off # GPIO_GAME_MIDI
|
||||
io 0x60 = 0x220
|
||||
io 0x62 = 0x300
|
||||
irq 0x70 = 9
|
||||
end
|
||||
device pnp 2e.8 off end # WDTO_PLED
|
||||
device pnp 2e.9 off end # GPIO_SUSLED
|
||||
device pnp 2e.a off end # ACPI
|
||||
device pnp 2e.b on # HW Monitor
|
||||
io 0x60 = 0x290
|
||||
irq 0x70 = 5
|
||||
end
|
||||
end
|
||||
end
|
||||
device pci 1.1 on # SM 0
|
||||
chip drivers/generic/generic #dimm 0-0-0
|
||||
device i2c 50 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 0-0-1
|
||||
device i2c 51 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 0-1-0
|
||||
device i2c 52 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 0-1-1
|
||||
device i2c 53 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-0-0
|
||||
device i2c 54 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-0-1
|
||||
device i2c 55 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-1-0
|
||||
device i2c 56 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-1-1
|
||||
device i2c 57 on end
|
||||
end
|
||||
end # SM
|
||||
device pci 1.1 on # SM 1
|
||||
#PCI device smbus address will depend on addon pci device, do we need to scan_smbus_bus?
|
||||
# chip drivers/generic/generic #PCIXA Slot1
|
||||
# device i2c 50 on end
|
||||
# end
|
||||
# chip drivers/generic/generic #PCIXB Slot1
|
||||
# device i2c 51 on end
|
||||
# end
|
||||
# chip drivers/generic/generic #PCIXB Slot2
|
||||
# device i2c 52 on end
|
||||
# end
|
||||
# chip drivers/generic/generic #PCI Slot1
|
||||
# device i2c 53 on end
|
||||
# end
|
||||
# chip drivers/generic/generic #Master MCP55 PCI-E
|
||||
# device i2c 54 on end
|
||||
# end
|
||||
# chip drivers/generic/generic #Slave MCP55 PCI-E
|
||||
# device i2c 55 on end
|
||||
# end
|
||||
chip drivers/generic/generic #MAC EEPROM
|
||||
device i2c 51 on end
|
||||
end
|
||||
|
||||
end # SM
|
||||
device pci 2.0 on end # USB 1.1
|
||||
device pci 2.1 on end # USB 2
|
||||
device pci 4.0 on end # IDE
|
||||
device pci 5.0 on end # SATA 0
|
||||
device pci 5.1 on end # SATA 1
|
||||
device pci 5.2 on end # SATA 2
|
||||
device pci 6.0 on
|
||||
chip drivers/pci/onboard
|
||||
device pci 4.0 on end
|
||||
register "rom_address" = "0xfff80000"
|
||||
end
|
||||
end # PCI
|
||||
device pci 6.1 off end # AZA
|
||||
device pci 8.0 on end # NIC
|
||||
device pci 9.0 on end # NIC
|
||||
device pci a.0 on end # PCI E 5
|
||||
device pci b.0 off end # PCI E 4
|
||||
device pci c.0 off end # PCI E 3
|
||||
device pci d.0 on end # PCI E 2
|
||||
device pci e.0 off end # PCI E 1
|
||||
device pci f.0 on end # PCI E 0
|
||||
register "ide0_enable" = "1"
|
||||
register "sata0_enable" = "1"
|
||||
register "sata1_enable" = "1"
|
||||
register "mac_eeprom_smbus" = "3" # 1: smbus under 2e.8, 2: SM0 3: SM1
|
||||
register "mac_eeprom_addr" = "0x51"
|
||||
end
|
||||
end # device pci 18.0
|
||||
device pci 18.1 on end
|
||||
device pci 18.2 on end
|
||||
device pci 18.3 on end
|
||||
device pci 18.4 on end
|
||||
end # mc0
|
||||
|
||||
end # PCI domain
|
||||
|
||||
# chip drivers/generic/debug
|
||||
# device pnp 0.0 off end # chip name
|
||||
# device pnp 0.1 on end # pci_regs_all
|
||||
# device pnp 0.2 on end # mem
|
||||
# device pnp 0.3 off end # cpuid
|
||||
# device pnp 0.4 on end # smbus_regs_all
|
||||
# device pnp 0.5 off end # dual core msr
|
||||
# device pnp 0.6 off end # cache size
|
||||
# device pnp 0.7 off end # tsc
|
||||
# device pnp 0.8 off end # io
|
||||
# device pnp 0.9 off end # io
|
||||
# end
|
||||
end #root_complex
|
||||
|
|
@ -0,0 +1,368 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007 AMD
|
||||
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
uses HAVE_MP_TABLE
|
||||
uses HAVE_PIRQ_TABLE
|
||||
uses HAVE_ACPI_TABLES
|
||||
uses ACPI_SSDTX_NUM
|
||||
uses USE_FALLBACK_IMAGE
|
||||
uses USE_FAILOVER_IMAGE
|
||||
uses HAVE_FALLBACK_BOOT
|
||||
uses HAVE_FAILOVER_BOOT
|
||||
uses HAVE_HARD_RESET
|
||||
uses IRQ_SLOT_COUNT
|
||||
uses HAVE_OPTION_TABLE
|
||||
uses CONFIG_MAX_CPUS
|
||||
uses CONFIG_MAX_PHYSICAL_CPUS
|
||||
uses CONFIG_LOGICAL_CPUS
|
||||
uses CONFIG_IOAPIC
|
||||
uses CONFIG_SMP
|
||||
uses FALLBACK_SIZE
|
||||
uses FAILOVER_SIZE
|
||||
uses ROM_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_IMAGE_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_SECTION_OFFSET
|
||||
uses CONFIG_ROM_PAYLOAD
|
||||
uses CONFIG_ROM_PAYLOAD_START
|
||||
uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
|
||||
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
||||
uses PAYLOAD_SIZE
|
||||
uses _ROMBASE
|
||||
uses XIP_ROM_SIZE
|
||||
uses XIP_ROM_BASE
|
||||
uses STACK_SIZE
|
||||
uses HEAP_SIZE
|
||||
uses USE_OPTION_TABLE
|
||||
uses LB_CKS_RANGE_START
|
||||
uses LB_CKS_RANGE_END
|
||||
uses LB_CKS_LOC
|
||||
uses MAINBOARD_PART_NUMBER
|
||||
uses MAINBOARD_VENDOR
|
||||
uses MAINBOARD
|
||||
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
||||
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
||||
uses COREBOOT_EXTRA_VERSION
|
||||
uses _RAMBASE
|
||||
uses TTYS0_BAUD
|
||||
uses TTYS0_BASE
|
||||
uses TTYS0_LCS
|
||||
uses DEFAULT_CONSOLE_LOGLEVEL
|
||||
uses MAXIMUM_CONSOLE_LOGLEVEL
|
||||
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
||||
uses CONFIG_CONSOLE_SERIAL8250
|
||||
uses HAVE_INIT_TIMER
|
||||
uses CONFIG_GDB_STUB
|
||||
uses CONFIG_GDB_STUB
|
||||
uses CROSS_COMPILE
|
||||
uses CC
|
||||
uses HOSTCC
|
||||
uses OBJCOPY
|
||||
uses CONFIG_CHIP_NAME
|
||||
uses CONFIG_CONSOLE_VGA
|
||||
uses CONFIG_USBDEBUG_DIRECT
|
||||
uses CONFIG_PCI_ROM_RUN
|
||||
uses HW_MEM_HOLE_SIZEK
|
||||
uses HW_MEM_HOLE_SIZE_AUTO_INC
|
||||
|
||||
uses HT_CHAIN_UNITID_BASE
|
||||
uses HT_CHAIN_END_UNITID_BASE
|
||||
uses SB_HT_CHAIN_ON_BUS0
|
||||
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
|
||||
|
||||
uses USE_DCACHE_RAM
|
||||
uses DCACHE_RAM_BASE
|
||||
uses DCACHE_RAM_SIZE
|
||||
uses DCACHE_RAM_GLOBAL_VAR_SIZE
|
||||
uses CONFIG_USE_INIT
|
||||
|
||||
uses SERIAL_CPU_INIT
|
||||
|
||||
uses ENABLE_APIC_EXT_ID
|
||||
uses APIC_ID_OFFSET
|
||||
uses LIFT_BSP_APIC_ID
|
||||
|
||||
uses CONFIG_PCI_64BIT_PREF_MEM
|
||||
|
||||
uses CONFIG_LB_MEM_TOPK
|
||||
|
||||
uses PCI_BUS_SEGN_BITS
|
||||
|
||||
uses CONFIG_AP_CODE_IN_CAR
|
||||
|
||||
uses MEM_TRAIN_SEQ
|
||||
|
||||
uses WAIT_BEFORE_CPUS_INIT
|
||||
|
||||
uses CONFIG_AMDMCT
|
||||
|
||||
uses CONFIG_USE_PRINTK_IN_CAR
|
||||
uses CAR_FAM10
|
||||
uses AMD_UCODE_PATCH_FILE
|
||||
|
||||
###
|
||||
### Build options
|
||||
###
|
||||
|
||||
##
|
||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||
##
|
||||
default ROM_SIZE=524288
|
||||
#default ROM_SIZE=0x100000
|
||||
|
||||
##
|
||||
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
|
||||
##
|
||||
#default FALLBACK_SIZE=131072
|
||||
#default FALLBACK_SIZE=0x40000
|
||||
|
||||
#FALLBACK: ROM_SIZE-4K
|
||||
default FALLBACK_SIZE=ROM_SIZE-0x01000
|
||||
#FAILOVER: 4K
|
||||
default FAILOVER_SIZE=0x01000
|
||||
|
||||
#more 1M for pgtbl
|
||||
default CONFIG_LB_MEM_TOPK=16384
|
||||
|
||||
##
|
||||
## Build code for the fallback boot
|
||||
##
|
||||
default HAVE_FALLBACK_BOOT=1
|
||||
default HAVE_FAILOVER_BOOT=1
|
||||
|
||||
##
|
||||
## Build code to reset the motherboard from coreboot
|
||||
##
|
||||
default HAVE_HARD_RESET=1
|
||||
|
||||
##
|
||||
## Build code to export a programmable irq routing table
|
||||
##
|
||||
default HAVE_PIRQ_TABLE=1
|
||||
default IRQ_SLOT_COUNT=11
|
||||
|
||||
##
|
||||
## Build code to export an x86 MP table
|
||||
## Useful for specifying IRQ routing values
|
||||
##
|
||||
default HAVE_MP_TABLE=1
|
||||
|
||||
## ACPI tables will be included
|
||||
default HAVE_ACPI_TABLES=0
|
||||
## extra SSDT num
|
||||
default ACPI_SSDTX_NUM=31
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
##
|
||||
default HAVE_OPTION_TABLE=1
|
||||
|
||||
##
|
||||
## Move the default coreboot cmos range off of AMD RTC registers
|
||||
##
|
||||
default LB_CKS_RANGE_START=49
|
||||
default LB_CKS_RANGE_END=122
|
||||
default LB_CKS_LOC=123
|
||||
|
||||
##
|
||||
## Build code for SMP support
|
||||
## Only worry about 2 micro processors
|
||||
##
|
||||
default CONFIG_SMP=1
|
||||
default CONFIG_MAX_PHYSICAL_CPUS=2
|
||||
default CONFIG_MAX_CPUS=4 * CONFIG_MAX_PHYSICAL_CPUS
|
||||
default CONFIG_LOGICAL_CPUS=1
|
||||
|
||||
#default SERIAL_CPU_INIT=0
|
||||
|
||||
default ENABLE_APIC_EXT_ID=1
|
||||
default APIC_ID_OFFSET=0x00
|
||||
default LIFT_BSP_APIC_ID=1
|
||||
|
||||
#CHIP_NAME ?
|
||||
default CONFIG_CHIP_NAME=1
|
||||
|
||||
#memory hole size, 0 mean disable, others will enable the hole, at that case if it is small than mmio_basek, it will use mmio_basek instead.
|
||||
#2G
|
||||
#default HW_MEM_HOLE_SIZEK=0x200000
|
||||
#1G
|
||||
default HW_MEM_HOLE_SIZEK=0x100000
|
||||
#512M
|
||||
#default HW_MEM_HOLE_SIZEK=0x80000
|
||||
|
||||
#make auto increase hole size to avoid hole_startk equal to basek so as to make some kernel happy
|
||||
#default HW_MEM_HOLE_SIZE_AUTO_INC=1
|
||||
|
||||
#VGA Console
|
||||
default CONFIG_CONSOLE_VGA=1
|
||||
default CONFIG_PCI_ROM_RUN=1
|
||||
|
||||
#default CONFIG_USBDEBUG_DIRECT=1
|
||||
|
||||
#HT Unit ID offset, default is 1, the typical one, 0 mean only one HT device
|
||||
default HT_CHAIN_UNITID_BASE=1
|
||||
|
||||
#real SB Unit ID, default is 0x20, mean dont touch it at last
|
||||
#default HT_CHAIN_END_UNITID_BASE=0x6
|
||||
|
||||
#make the SB HT chain on bus 0, default is not (0)
|
||||
default SB_HT_CHAIN_ON_BUS0=2
|
||||
|
||||
#only offset for SB chain?, default is yes(1)
|
||||
default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
|
||||
|
||||
#allow capable device use that above 4G
|
||||
#default CONFIG_PCI_64BIT_PREF_MEM=1
|
||||
|
||||
##
|
||||
## enable CACHE_AS_RAM specifics
|
||||
##
|
||||
default USE_DCACHE_RAM=1
|
||||
default DCACHE_RAM_BASE=0xc4000
|
||||
default DCACHE_RAM_SIZE=0x0c000
|
||||
default DCACHE_RAM_GLOBAL_VAR_SIZE=0x04000
|
||||
default CONFIG_USE_INIT=0
|
||||
|
||||
default MEM_TRAIN_SEQ=2
|
||||
default WAIT_BEFORE_CPUS_INIT=0
|
||||
default CONFIG_AMDMCT = 1
|
||||
|
||||
##
|
||||
## Build code to setup a generic IOAPIC
|
||||
##
|
||||
default CONFIG_IOAPIC=1
|
||||
|
||||
##
|
||||
## Clean up the motherboard id strings
|
||||
##
|
||||
default MAINBOARD_PART_NUMBER="S2912 (Fam10)"
|
||||
default MAINBOARD_VENDOR="Tyan"
|
||||
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x10f1
|
||||
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x2912
|
||||
|
||||
##
|
||||
## Set microcode patch file name
|
||||
##
|
||||
## Barcelona rev Ax: "mc_patch_01000020.h"
|
||||
## Barcelona rev B0, B1, BA: "mc_patch_01000084.h"
|
||||
## Barcelona rev B2, B3: "mc_patch_01000083.h"
|
||||
##
|
||||
default AMD_UCODE_PATCH_FILE="mc_patch_01000083.h"
|
||||
|
||||
###
|
||||
### coreboot layout values
|
||||
###
|
||||
|
||||
## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
|
||||
default ROM_IMAGE_SIZE = 65536
|
||||
|
||||
##
|
||||
## Use a small 8K stack
|
||||
##
|
||||
default STACK_SIZE=0x2000
|
||||
|
||||
##
|
||||
## Use a small 32K heap
|
||||
##
|
||||
default HEAP_SIZE=0xc0000
|
||||
|
||||
##
|
||||
## Only use the option table in a normal image
|
||||
##
|
||||
default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE )
|
||||
|
||||
##
|
||||
## Coreboot C code runs at this location in RAM
|
||||
##
|
||||
default _RAMBASE=0x00200000
|
||||
|
||||
##
|
||||
## Load the payload from the ROM
|
||||
##
|
||||
default CONFIG_ROM_PAYLOAD = 1
|
||||
|
||||
#default CONFIG_COMPRESSED_PAYLOAD = 1
|
||||
|
||||
###
|
||||
### Defaults of options that you may want to override in the target config file
|
||||
###
|
||||
|
||||
##
|
||||
## The default compiler
|
||||
##
|
||||
default CC="$(CROSS_COMPILE)gcc -m32"
|
||||
default HOSTCC="gcc"
|
||||
|
||||
##
|
||||
## Disable the gdb stub by default
|
||||
##
|
||||
default CONFIG_GDB_STUB=0
|
||||
|
||||
##
|
||||
## The Serial Console
|
||||
##
|
||||
default CONFIG_USE_PRINTK_IN_CAR=1
|
||||
|
||||
# To Enable the Serial Console
|
||||
default CONFIG_CONSOLE_SERIAL8250=1
|
||||
|
||||
## Select the serial console baud rate
|
||||
default TTYS0_BAUD=115200
|
||||
#default TTYS0_BAUD=57600
|
||||
#default TTYS0_BAUD=38400
|
||||
#default TTYS0_BAUD=19200
|
||||
#default TTYS0_BAUD=9600
|
||||
#default TTYS0_BAUD=4800
|
||||
#default TTYS0_BAUD=2400
|
||||
#default TTYS0_BAUD=1200
|
||||
|
||||
# Select the serial console base port
|
||||
default TTYS0_BASE=0x3f8
|
||||
|
||||
# Select the serial protocol
|
||||
# This defaults to 8 data bits, 1 stop bit, and no parity
|
||||
default TTYS0_LCS=0x3
|
||||
|
||||
##
|
||||
### Select the coreboot loglevel
|
||||
##
|
||||
## EMERG 1 system is unusable
|
||||
## ALERT 2 action must be taken immediately
|
||||
## CRIT 3 critical conditions
|
||||
## ERR 4 error conditions
|
||||
## WARNING 5 warning conditions
|
||||
## NOTICE 6 normal but significant condition
|
||||
## INFO 7 informational
|
||||
## DEBUG 8 debug-level messages
|
||||
## SPEW 9 Way too many details
|
||||
|
||||
## Request this level of debugging output
|
||||
default DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
## At a maximum only compile in this level of debugging
|
||||
default MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
##
|
||||
## Select power on after power fail setting
|
||||
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
|
||||
|
||||
### End Options.lb
|
||||
end
|
||||
|
|
@ -0,0 +1,130 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#define ASSEMBLY 1
|
||||
#define __ROMCC__
|
||||
|
||||
#define RAMINIT_SYSINFO 1
|
||||
#define CACHE_AS_RAM_ADDRESS_DEBUG 0
|
||||
|
||||
#define SET_NB_CFG_54 1
|
||||
|
||||
//used by raminit
|
||||
#define QRANK_DIMM_SUPPORT 1
|
||||
|
||||
#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
|
||||
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include "option_table.h"
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
#include "pc80/serial.c"
|
||||
|
||||
#if CONFIG_USE_INIT == 0
|
||||
#include "lib/memcpy.c"
|
||||
#endif
|
||||
|
||||
#include "arch/i386/lib/console.c"
|
||||
|
||||
#if 0
|
||||
static void post_code(uint8_t value) {
|
||||
#if 1
|
||||
int i;
|
||||
for(i=0;i<0x80000;i++) {
|
||||
outb(value, 0x80);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#endif
|
||||
|
||||
#include <cpu/amd/model_fxx_rev.h>
|
||||
#include "northbridge/amd/amdk8/raminit.h"
|
||||
#include "cpu/amd/model_fxx/apic_timer.c"
|
||||
|
||||
#include "lib/delay.c"
|
||||
|
||||
//#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
|
||||
#include "northbridge/amd/amdk8/debug.c"
|
||||
|
||||
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
|
||||
|
||||
#include "northbridge/amd/amdk8/amdk8_f.h"
|
||||
|
||||
#include "cpu/x86/mtrr.h"
|
||||
#include "cpu/amd/mtrr.h"
|
||||
#include "cpu/x86/tsc.h"
|
||||
|
||||
#include "northbridge/amd/amdk8/amdk8_f_pci.c"
|
||||
#include "northbridge/amd/amdk8/raminit_f_dqs.c"
|
||||
|
||||
#include "cpu/amd/dualcore/dualcore.c"
|
||||
|
||||
void hardwaremain(int ret_addr)
|
||||
{
|
||||
struct sys_info *sysinfo = (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE); // in CACHE
|
||||
struct sys_info *sysinfox = ((CONFIG_LB_MEM_TOPK<<10) - DCACHE_RAM_GLOBAL_VAR_SIZE); // in RAM
|
||||
|
||||
struct node_core_id id;
|
||||
|
||||
id = get_node_core_id_x();
|
||||
|
||||
//FIXME: for USBDEBUG_DIRECT you need to make sure dbg_info get assigned in AP
|
||||
print_debug("CODE IN CACHE ON NODE:"); print_debug_hex8(id.nodeid); print_debug("\r\n");
|
||||
|
||||
train_ram(id.nodeid, sysinfo, sysinfox);
|
||||
|
||||
/*
|
||||
go back, but can not use stack any more, because we only keep ret_addr and can not restore esp, and ebp
|
||||
*/
|
||||
|
||||
__asm__ volatile (
|
||||
"movl %0, %%edi\n\t"
|
||||
"jmp *%%edi\n\t"
|
||||
:: "a"(ret_addr)
|
||||
);
|
||||
|
||||
|
||||
|
||||
}
|
||||
struct eregs {
|
||||
uint32_t eax, ecx, edx, ebx, esp, ebp, esi, edi;
|
||||
uint32_t vector;
|
||||
uint32_t error_code;
|
||||
uint32_t eip;
|
||||
uint32_t cs;
|
||||
uint32_t eflags;
|
||||
};
|
||||
|
||||
void x86_exception(struct eregs *info)
|
||||
{
|
||||
do {
|
||||
hlt();
|
||||
} while(1);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,386 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#define ASSEMBLY 1
|
||||
#define __ROMCC__
|
||||
|
||||
#define RAMINIT_SYSINFO 1
|
||||
|
||||
#define FAM10_SCAN_PCI_BUS 0
|
||||
#define FAM10_ALLOCATE_IO_RANGE 1
|
||||
|
||||
#define QRANK_DIMM_SUPPORT 1
|
||||
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
#define SET_NB_CFG_54 1
|
||||
#endif
|
||||
|
||||
#define FAM10_SET_FIDVID 1
|
||||
#define FAM10_SET_FIDVID_CORE_RANGE 0
|
||||
|
||||
#define DBGP_DEFAULT 7
|
||||
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include "option_table.h"
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
|
||||
static void post_code(u8 value) {
|
||||
outb(value, 0x80);
|
||||
}
|
||||
|
||||
#if USE_FAILOVER_IMAGE==0
|
||||
#include "pc80/serial.c"
|
||||
#include "arch/i386/lib/console.c"
|
||||
#if CONFIG_USBDEBUG_DIRECT
|
||||
#include "southbridge/nvidia/mcp55/mcp55_enable_usbdebug_direct.c"
|
||||
#include "pc80/usbdebug_direct_serial.c"
|
||||
#endif
|
||||
#include "ram/ramtest.c"
|
||||
|
||||
#include <cpu/amd/model_10xxx_rev.h>
|
||||
|
||||
#include "southbridge/nvidia/mcp55/mcp55_early_smbus.c"
|
||||
#include "northbridge/amd/amdfam10/raminit.h"
|
||||
#include "northbridge/amd/amdfam10/amdfam10.h"
|
||||
|
||||
#endif
|
||||
|
||||
#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "northbridge/amd/amdfam10/reset_test.c"
|
||||
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
|
||||
#include "superio/winbond/w83627hf/w83627hf_early_init.c"
|
||||
|
||||
#if USE_FAILOVER_IMAGE==0
|
||||
|
||||
#include "cpu/x86/bist.h"
|
||||
|
||||
#if CONFIG_USE_INIT == 0
|
||||
#include "lib/memcpy.c"
|
||||
#endif
|
||||
|
||||
#include "northbridge/amd/amdfam10/debug.c"
|
||||
|
||||
#include "cpu/amd/mtrr/amd_earlymtrr.c"
|
||||
|
||||
#include "northbridge/amd/amdfam10/setup_resource_map.c"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||
|
||||
#include "southbridge/nvidia/mcp55/mcp55_early_ctrl.c"
|
||||
|
||||
static void memreset_setup(void)
|
||||
{
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
{
|
||||
}
|
||||
|
||||
static inline void activate_spd_rom(const struct mem_controller *ctrl)
|
||||
{
|
||||
/* nothing to do */
|
||||
}
|
||||
|
||||
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||
{
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
#include "northbridge/amd/amdfam10/amdfam10.h"
|
||||
#include "northbridge/amd/amdht/ht_wrapper.c"
|
||||
|
||||
#include "include/cpu/x86/mem.h"
|
||||
#include "northbridge/amd/amdfam10/raminit_sysinfo_in_ram.c"
|
||||
#include "northbridge/amd/amdfam10/raminit_amdmct.c"
|
||||
#include "northbridge/amd/amdfam10/amdfam10_pci.c"
|
||||
|
||||
#include "resourcemap.c"
|
||||
|
||||
#include "cpu/amd/quadcore/quadcore.c"
|
||||
|
||||
#define MCP55_NUM 1
|
||||
#define MCP55_USE_NIC 1
|
||||
|
||||
#define MCP55_PCI_E_X_0 1
|
||||
|
||||
#define MCP55_MB_SETUP \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+37, 0x00, 0x44,/* GPIO38 PCI_REQ3 */ \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+38, 0x00, 0x44,/* GPIO39 PCI_GNT3 */ \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+39, 0x00, 0x44,/* GPIO40 PCI_GNT2 */ \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+40, 0x00, 0x44,/* GPIO41 PCI_REQ2 */ \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+59, 0x00, 0x60,/* GPIP60 FANCTL0 */ \
|
||||
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+60, 0x00, 0x60,/* GPIO61 FANCTL1 */
|
||||
|
||||
#include "southbridge/nvidia/mcp55/mcp55_early_setup_ss.h"
|
||||
#include "southbridge/nvidia/mcp55/mcp55_early_setup_car.c"
|
||||
|
||||
#include "cpu/amd/car/copy_and_run.c"
|
||||
|
||||
#include "cpu/amd/car/post_cache_as_ram.c"
|
||||
|
||||
#include "cpu/amd/model_10xxx/init_cpus.c"
|
||||
|
||||
#include "cpu/amd/model_10xxx/fidvid.c"
|
||||
|
||||
#endif
|
||||
|
||||
#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1))
|
||||
|
||||
#include "southbridge/nvidia/mcp55/mcp55_enable_rom.c"
|
||||
#include "northbridge/amd/amdfam10/early_ht.c"
|
||||
|
||||
|
||||
static void sio_setup(void)
|
||||
{
|
||||
|
||||
unsigned value;
|
||||
uint32_t dword;
|
||||
uint8_t byte;
|
||||
|
||||
byte = pci_read_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b);
|
||||
byte |= 0x20;
|
||||
pci_write_config8(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0x7b, byte);
|
||||
|
||||
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0);
|
||||
/*serial 0 */
|
||||
dword |= (1<<0);
|
||||
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa0, dword);
|
||||
|
||||
dword = pci_read_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4);
|
||||
dword |= (1<<16);
|
||||
pci_write_config32(PCI_DEV(0, MCP55_DEVN_BASE+1 , 0), 0xa4, dword);
|
||||
|
||||
}
|
||||
|
||||
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
unsigned last_boot_normal_x = last_boot_normal();
|
||||
|
||||
/* Is this a cpu only reset? or Is this a secondary cpu? */
|
||||
if ((cpu_init_detectedx) || (!boot_cpu())) {
|
||||
if (last_boot_normal_x) {
|
||||
goto normal_image;
|
||||
} else {
|
||||
goto fallback_image;
|
||||
}
|
||||
}
|
||||
|
||||
/* Nothing special needs to be done to find bus 0 */
|
||||
/* Allow the HT devices to be found */
|
||||
|
||||
set_bsp_node_CHtExtNodeCfgEn();
|
||||
enumerate_ht_chain();
|
||||
|
||||
sio_setup();
|
||||
|
||||
/* Setup the mcp55 */
|
||||
mcp55_enable_rom();
|
||||
|
||||
/* Is this a deliberate reset by the bios */
|
||||
if (bios_reset_detected() && last_boot_normal_x) {
|
||||
goto normal_image;
|
||||
}
|
||||
/* This is the primary cpu how should I boot? */
|
||||
else if (do_normal_boot()) {
|
||||
goto normal_image;
|
||||
}
|
||||
else {
|
||||
goto fallback_image;
|
||||
}
|
||||
normal_image:
|
||||
__asm__ volatile ("jmp __normal_image"
|
||||
: /* outputs */
|
||||
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
|
||||
);
|
||||
|
||||
fallback_image:
|
||||
#if HAVE_FAILOVER_BOOT==1
|
||||
__asm__ volatile ("jmp __fallback_image"
|
||||
: /* outputs */
|
||||
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
|
||||
)
|
||||
#endif
|
||||
;
|
||||
}
|
||||
#endif
|
||||
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
|
||||
|
||||
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
#if HAVE_FAILOVER_BOOT==1
|
||||
#if USE_FAILOVER_IMAGE==1
|
||||
failover_process(bist, cpu_init_detectedx);
|
||||
#else
|
||||
real_main(bist, cpu_init_detectedx);
|
||||
#endif
|
||||
#else
|
||||
#if USE_FALLBACK_IMAGE == 1
|
||||
failover_process(bist, cpu_init_detectedx);
|
||||
#endif
|
||||
real_main(bist, cpu_init_detectedx);
|
||||
#endif
|
||||
}
|
||||
|
||||
#if USE_FAILOVER_IMAGE==0
|
||||
#include "spd_addr.h"
|
||||
#include "cpu/amd/microcode/microcode.c"
|
||||
#include "cpu/amd/model_10xxx/update_microcode.c"
|
||||
|
||||
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
struct sys_info *sysinfo = (struct sys_info *)(DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
|
||||
|
||||
u32 bsp_apicid = 0;
|
||||
u32 val;
|
||||
u32 wants_reset;
|
||||
msr_t msr;
|
||||
|
||||
post_code(0x30);
|
||||
|
||||
if (bist == 0) {
|
||||
bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
|
||||
}
|
||||
|
||||
post_code(0x32);
|
||||
|
||||
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||
uart_init();
|
||||
console_init();
|
||||
printk_debug("\n");
|
||||
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
#if CONFIG_USBDEBUG_DIRECT
|
||||
mcp55_enable_usbdebug_direct(DBGP_DEFAULT);
|
||||
early_usbdebug_direct_init();
|
||||
#endif
|
||||
|
||||
val = cpuid_eax(1);
|
||||
printk_debug("BSP Family_Model: %08x \n", val);
|
||||
printk_debug("*sysinfo range: ["); print_debug_hex32((u32)sysinfo); print_debug(","); print_debug_hex32((u32)sysinfo+sizeof(struct sys_info)); print_debug("]\n");
|
||||
printk_debug("bsp_apicid = %02x \n", bsp_apicid);
|
||||
printk_debug("cpu_init_detectedx = %08x \n", cpu_init_detectedx);
|
||||
|
||||
|
||||
/* Setup sysinfo defaults */
|
||||
set_sysinfo_in_ram(0);
|
||||
|
||||
update_microcode(val);
|
||||
post_code(0x33);
|
||||
|
||||
cpuSetAMDMSR();
|
||||
post_code(0x34);
|
||||
|
||||
amd_ht_init(sysinfo);
|
||||
post_code(0x35);
|
||||
|
||||
/* Setup nodes PCI space and start core 0 AP init. */
|
||||
finalize_node_setup(sysinfo);
|
||||
|
||||
/* Setup any mainboard PCI settings etc. */
|
||||
setup_mb_resource_map();
|
||||
post_code(0x36);
|
||||
|
||||
/* wait for all the APs core0 started by finalize_node_setup. */
|
||||
/* FIXME: A bunch of cores are going to start output to serial at once.
|
||||
It would be nice to fixup prink spinlocks for ROM XIP mode.
|
||||
I think it could be done by putting the spinlock flag in the cache
|
||||
of the BSP located right after sysinfo.
|
||||
*/
|
||||
wait_all_core0_started();
|
||||
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
/* Core0 on each node is configured. Now setup any additional cores. */
|
||||
printk_debug("start_other_cores()\n");
|
||||
start_other_cores();
|
||||
post_code(0x37);
|
||||
wait_all_other_cores_started(bsp_apicid);
|
||||
#endif
|
||||
|
||||
post_code(0x38);
|
||||
|
||||
#if FAM10_SET_FIDVID == 1
|
||||
msr = rdmsr(0xc0010071);
|
||||
printk_debug("\nBegin FIDVID MSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
|
||||
|
||||
/* FIXME: The sb fid change may survive the warm reset and only
|
||||
need to be done once.*/
|
||||
enable_fid_change_on_sb(sysinfo->sbbusn, sysinfo->sbdn);
|
||||
|
||||
post_code(0x39);
|
||||
|
||||
if (!warm_reset_detect(0)) { // BSP is node 0
|
||||
init_fidvid_bsp(bsp_apicid, sysinfo->nodes);
|
||||
} else {
|
||||
init_fidvid_stage2(bsp_apicid, 0); // BSP is node 0
|
||||
}
|
||||
|
||||
post_code(0x3A);
|
||||
|
||||
/* show final fid and vid */
|
||||
msr=rdmsr(0xc0010071);
|
||||
printk_debug("End FIDVIDMSR 0xc0010071 0x%08x 0x%08x \n", msr.hi, msr.lo);
|
||||
#endif
|
||||
|
||||
wants_reset = mcp55_early_setup_x();
|
||||
|
||||
/* Reset for HT, FIDVID, PLL and errata changes to take affect. */
|
||||
if (!warm_reset_detect(0)) {
|
||||
print_info("...WARM RESET...\n\n\n");
|
||||
soft_reset();
|
||||
die("After soft_reset_x - shouldn't see this message!!!\n");
|
||||
}
|
||||
|
||||
if (wants_reset)
|
||||
printk_debug("mcp55_early_setup_x wanted additional reset!\n");
|
||||
|
||||
post_code(0x3B);
|
||||
|
||||
/* It's the time to set ctrl in sysinfo now; */
|
||||
printk_debug("fill_mem_ctrl()\n");
|
||||
fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
|
||||
post_code(0x3D);
|
||||
|
||||
printk_debug("enable_smbus()\n");
|
||||
enable_smbus();
|
||||
post_code(0x3E);
|
||||
|
||||
memreset_setup();
|
||||
post_code(0x40);
|
||||
|
||||
printk_debug("raminit_amdmct()\n");
|
||||
raminit_amdmct(sysinfo);
|
||||
post_code(0x41);
|
||||
|
||||
printk_debug("\n*** Yes, the copy/decompress is taking a while, FIXME!\n");
|
||||
post_cache_as_ram(); // BSP switch stack to ram, copy then execute LB.
|
||||
post_code(0x43); // Should never see this post code.
|
||||
}
|
||||
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
extern struct chip_operations mainboard_tyan_s2912_fam10_ops;
|
||||
|
||||
struct mainboard_tyan_s2912_fam10_config {
|
||||
// int fixup_scsi;
|
||||
// int fixup_vga;
|
||||
};
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007 AMD
|
||||
## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
entries
|
||||
|
||||
#start-bit length config config-ID name
|
||||
#0 8 r 0 seconds
|
||||
#8 8 r 0 alarm_seconds
|
||||
#16 8 r 0 minutes
|
||||
#24 8 r 0 alarm_minutes
|
||||
#32 8 r 0 hours
|
||||
#40 8 r 0 alarm_hours
|
||||
#48 8 r 0 day_of_week
|
||||
#56 8 r 0 day_of_month
|
||||
#64 8 r 0 month
|
||||
#72 8 r 0 year
|
||||
#80 4 r 0 rate_select
|
||||
#84 3 r 0 REF_Clock
|
||||
#87 1 r 0 UIP
|
||||
#88 1 r 0 auto_switch_DST
|
||||
#89 1 r 0 24_hour_mode
|
||||
#90 1 r 0 binary_values_enable
|
||||
#91 1 r 0 square-wave_out_enable
|
||||
#92 1 r 0 update_finished_enable
|
||||
#93 1 r 0 alarm_interrupt_enable
|
||||
#94 1 r 0 periodic_interrupt_enable
|
||||
#95 1 r 0 disable_clock_updates
|
||||
#96 288 r 0 temporary_filler
|
||||
0 384 r 0 reserved_memory
|
||||
384 1 e 4 boot_option
|
||||
385 1 e 4 last_boot
|
||||
386 1 e 1 ECC_memory
|
||||
388 4 r 0 reboot_bits
|
||||
392 3 e 5 baud_rate
|
||||
395 1 e 1 hw_scrubber
|
||||
396 1 e 1 interleave_chip_selects
|
||||
397 2 e 8 max_mem_clock
|
||||
399 1 e 2 quad_core
|
||||
400 1 e 1 power_on_after_fail
|
||||
412 4 e 6 debug_level
|
||||
416 4 e 7 boot_first
|
||||
420 4 e 7 boot_second
|
||||
424 4 e 7 boot_third
|
||||
428 4 h 0 boot_index
|
||||
432 8 h 0 boot_countdown
|
||||
440 4 e 9 slow_cpu
|
||||
444 1 e 1 nmi
|
||||
445 1 e 1 iommu
|
||||
728 256 h 0 user_data
|
||||
984 16 h 0 check_sum
|
||||
# Reserve the extended AMD configuration registers
|
||||
1000 24 r 0 reserved_memory
|
||||
|
||||
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
5 0 115200
|
||||
5 1 57600
|
||||
5 2 38400
|
||||
5 3 19200
|
||||
5 4 9600
|
||||
5 5 4800
|
||||
5 6 2400
|
||||
5 7 1200
|
||||
6 6 Notice
|
||||
6 7 Info
|
||||
6 8 Debug
|
||||
6 9 Spew
|
||||
7 0 Network
|
||||
7 1 HDD
|
||||
7 2 Floppy
|
||||
7 8 Fallback_Network
|
||||
7 9 Fallback_HDD
|
||||
7 10 Fallback_Floppy
|
||||
#7 3 ROM
|
||||
8 0 200Mhz
|
||||
8 1 166Mhz
|
||||
8 2 133Mhz
|
||||
8 3 100Mhz
|
||||
9 0 off
|
||||
9 1 87.5%
|
||||
9 2 75.0%
|
||||
9 3 62.5%
|
||||
9 4 50.0%
|
||||
9 5 37.5%
|
||||
9 6 25.0%
|
||||
9 7 12.5%
|
||||
|
||||
checksums
|
||||
|
||||
checksum 392 983 984
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,138 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
#include <cpu/amd/dualcore.h>
|
||||
#endif
|
||||
|
||||
#include <cpu/amd/amdfam10_sysconf.h>
|
||||
|
||||
#include "mb_sysconf.h"
|
||||
|
||||
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
|
||||
struct mb_sysconf_t mb_sysconf;
|
||||
|
||||
/* Here you only need to set value in pci1234 for HT-IO that could be
|
||||
installed or not You may need to preset pci1234 for HTIO board, please
|
||||
refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */
|
||||
static u32 pci1234x[] = {
|
||||
0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
|
||||
0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
|
||||
0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
|
||||
0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
|
||||
0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
|
||||
0x0000ffc, 0x0000ffc,
|
||||
};
|
||||
|
||||
|
||||
/* HT Chain device num, actually it is unit id base of every ht device
|
||||
in chain, assume every chain only have 4 ht device at most */
|
||||
|
||||
static unsigned hcdnx[] = {
|
||||
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
|
||||
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
|
||||
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
|
||||
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
|
||||
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
|
||||
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
|
||||
0x20202020, 0x20202020,
|
||||
};
|
||||
|
||||
extern void get_pci1234(void);
|
||||
|
||||
static unsigned get_bus_conf_done = 0;
|
||||
|
||||
void get_bus_conf(void)
|
||||
{
|
||||
|
||||
unsigned apicid_base;
|
||||
struct mb_sysconf_t *m;
|
||||
|
||||
device_t dev;
|
||||
int i, j;
|
||||
|
||||
if(get_bus_conf_done==1) return; //do it only once
|
||||
|
||||
get_bus_conf_done = 1;
|
||||
|
||||
sysconf.mb = &mb_sysconf;
|
||||
|
||||
m = sysconf.mb;
|
||||
memset(m, 0, sizeof(struct mb_sysconf_t));
|
||||
|
||||
sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]);
|
||||
for(i=0;i<sysconf.hc_possible_num; i++) {
|
||||
sysconf.pci1234[i] = pci1234x[i];
|
||||
sysconf.hcdn[i] = hcdnx[i];
|
||||
}
|
||||
|
||||
get_pci1234();
|
||||
|
||||
m->bus_type[0] = 1; //pci
|
||||
sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain
|
||||
m->bus_mcp55[0] = (sysconf.pci1234[0] >> 12) & 0xff;
|
||||
|
||||
/* MCP55 */
|
||||
dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0));
|
||||
if (dev) {
|
||||
m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
else {
|
||||
printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06);
|
||||
}
|
||||
|
||||
for(i=2; i<8;i++) {
|
||||
dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0));
|
||||
if (dev) {
|
||||
m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
else {
|
||||
printk_debug("ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 );
|
||||
}
|
||||
}
|
||||
|
||||
for(i=0; i< sysconf.hc_possible_num; i++) {
|
||||
if(!(sysconf.pci1234[i] & 0x1) ) continue;
|
||||
|
||||
unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
|
||||
unsigned busn_max = (sysconf.pci1234[i] >> 20) & 0xff;
|
||||
for (j = busn; j <= busn_max; j++)
|
||||
m->bus_type[j] = 1;
|
||||
if(m->bus_isa <= busn_max)
|
||||
m->bus_isa = busn_max + 1;
|
||||
printk_debug("i=%d bus range: [%x, %x] bus_isa=%x\n",i, busn, busn_max, m->bus_isa);
|
||||
}
|
||||
|
||||
|
||||
/*I/O APICs: APIC ID Version State Address*/
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
apicid_base = get_apicid_base(1);
|
||||
#else
|
||||
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
|
||||
#endif
|
||||
m->apicid_mcp55 = apicid_base+0;
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,136 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
/* This file was generated by getpir.c, do not modify!
|
||||
(but if you do, please run checkpir on it to verify)
|
||||
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets up
|
||||
|
||||
Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
|
||||
*/
|
||||
#include <console/console.h>
|
||||
#include <device/pci.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
#include <arch/pirq_routing.h>
|
||||
|
||||
#include <cpu/amd/amdfam10_sysconf.h>
|
||||
#include "mb_sysconf.h"
|
||||
|
||||
static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0,
|
||||
uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3,
|
||||
uint8_t slot, uint8_t rfu)
|
||||
{
|
||||
pirq_info->bus = bus;
|
||||
pirq_info->devfn = devfn;
|
||||
pirq_info->irq[0].link = link0;
|
||||
pirq_info->irq[0].bitmap = bitmap0;
|
||||
pirq_info->irq[1].link = link1;
|
||||
pirq_info->irq[1].bitmap = bitmap1;
|
||||
pirq_info->irq[2].link = link2;
|
||||
pirq_info->irq[2].bitmap = bitmap2;
|
||||
pirq_info->irq[3].link = link3;
|
||||
pirq_info->irq[3].bitmap = bitmap3;
|
||||
pirq_info->slot = slot;
|
||||
pirq_info->rfu = rfu;
|
||||
}
|
||||
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
|
||||
struct irq_routing_table *pirq;
|
||||
struct irq_info *pirq_info;
|
||||
unsigned slot_num;
|
||||
uint8_t *v;
|
||||
struct mb_sysconf_t *m;
|
||||
unsigned sbdn;
|
||||
|
||||
uint8_t sum=0;
|
||||
int i;
|
||||
|
||||
get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c
|
||||
sbdn = sysconf.sbdn;
|
||||
m = sysconf.mb;
|
||||
|
||||
/* Align the table to be 16 byte aligned. */
|
||||
addr += 15;
|
||||
addr &= ~15;
|
||||
|
||||
/* This table must be betweeen 0xf0000 & 0x100000 */
|
||||
printk_info("Writing IRQ routing tables to 0x%x...", addr);
|
||||
|
||||
pirq = (void *)(addr);
|
||||
v = (uint8_t *)(addr);
|
||||
|
||||
pirq->signature = PIRQ_SIGNATURE;
|
||||
pirq->version = PIRQ_VERSION;
|
||||
|
||||
pirq->rtr_bus = m->bus_mcp55[0];
|
||||
pirq->rtr_devfn = ((sbdn+6)<<3)|0;
|
||||
|
||||
pirq->exclusive_irqs = 0;
|
||||
|
||||
pirq->rtr_vendor = 0x10de;
|
||||
pirq->rtr_device = 0x0370;
|
||||
|
||||
pirq->miniport_data = 0;
|
||||
|
||||
memset(pirq->rfu, 0, sizeof(pirq->rfu));
|
||||
|
||||
pirq_info = (void *) ( &pirq->checksum + 1);
|
||||
slot_num = 0;
|
||||
//pci bridge
|
||||
write_pirq_info(pirq_info, m->bus_mcp55[0], ((sbdn+6)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
|
||||
pirq_info++; slot_num++;
|
||||
|
||||
for(i=1; i< sysconf.hc_possible_num; i++) {
|
||||
if(!(sysconf.pci1234[i] & 0x1) ) continue;
|
||||
unsigned busn = (sysconf.pci1234[i] >> 12) & 0xff;
|
||||
unsigned devn = sysconf.hcdn[i] & 0xff;
|
||||
|
||||
write_pirq_info(pirq_info, busn, (devn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
|
||||
pirq_info++; slot_num++;
|
||||
}
|
||||
|
||||
#if CBB
|
||||
write_pirq_info(pirq_info, CBB, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
|
||||
pirq_info++; slot_num++;
|
||||
if(sysconf.nodes>32) {
|
||||
write_pirq_info(pirq_info, CBB-1, (0<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0);
|
||||
pirq_info++; slot_num++;
|
||||
}
|
||||
#endif
|
||||
|
||||
pirq->size = 32 + 16 * slot_num;
|
||||
|
||||
for (i = 0; i < pirq->size; i++)
|
||||
sum += v[i];
|
||||
|
||||
sum = pirq->checksum - sum;
|
||||
|
||||
if (sum != pirq->checksum) {
|
||||
pirq->checksum = sum;
|
||||
}
|
||||
|
||||
printk_info("done.\n");
|
||||
|
||||
return (unsigned long) pirq_info;
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <device/pci_ops.h>
|
||||
#include "chip.h"
|
||||
|
||||
#if CONFIG_CHIP_NAME == 1
|
||||
struct chip_operations mainboard_tyan_s2912_fam10_ops = {
|
||||
CHIP_NAME("Tyan S2912 Mainboard (Family 10)")
|
||||
};
|
||||
#endif
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#ifndef MB_SYSCONF_H
|
||||
#define MB_SYSCONF_H
|
||||
|
||||
struct mb_sysconf_t {
|
||||
unsigned char bus_isa;
|
||||
unsigned char bus_mcp55[8]; //1
|
||||
unsigned apicid_mcp55;
|
||||
unsigned bus_type[256];
|
||||
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
|
|
@ -0,0 +1,158 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <arch/smp/mpspec.h>
|
||||
#include <device/pci.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#include <cpu/amd/amdfam10_sysconf.h>
|
||||
|
||||
#include "mb_sysconf.h"
|
||||
|
||||
void *smp_write_config_table(void *v)
|
||||
{
|
||||
static const char sig[4] = "PCMP";
|
||||
static const char oem[8] = "TYAN ";
|
||||
static const char productid[12] = "S2895 ";
|
||||
struct mp_config_table *mc;
|
||||
struct mb_sysconf_t *m;
|
||||
unsigned sbdn;
|
||||
|
||||
int i,j;
|
||||
|
||||
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
||||
memset(mc, 0, sizeof(*mc));
|
||||
|
||||
memcpy(mc->mpc_signature, sig, sizeof(sig));
|
||||
mc->mpc_length = sizeof(*mc); /* initially just the header */
|
||||
mc->mpc_spec = 0x04;
|
||||
mc->mpc_checksum = 0; /* not yet computed */
|
||||
memcpy(mc->mpc_oem, oem, sizeof(oem));
|
||||
memcpy(mc->mpc_productid, productid, sizeof(productid));
|
||||
mc->mpc_oemptr = 0;
|
||||
mc->mpc_oemsize = 0;
|
||||
mc->mpc_entry_count = 0; /* No entries yet... */
|
||||
mc->mpc_lapic = LAPIC_ADDR;
|
||||
mc->mpe_length = 0;
|
||||
mc->mpe_checksum = 0;
|
||||
mc->reserved = 0;
|
||||
|
||||
smp_write_processors(mc);
|
||||
|
||||
get_bus_conf();
|
||||
sbdn = sysconf.sbdn;
|
||||
m = sysconf.mb;
|
||||
|
||||
/*Bus: Bus ID Type*/
|
||||
/* define bus and isa numbers */
|
||||
for(j= 0; j < 256 ; j++) {
|
||||
if(m->bus_type[j])
|
||||
smp_write_bus(mc, j, "PCI ");
|
||||
}
|
||||
smp_write_bus(mc, m->bus_isa, "ISA ");
|
||||
|
||||
/*I/O APICs: APIC ID Version State Address*/
|
||||
{
|
||||
device_t dev;
|
||||
struct resource *res;
|
||||
uint32_t dword;
|
||||
|
||||
dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sbdn+ 0x1,0));
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_1);
|
||||
if (res) {
|
||||
smp_write_ioapic(mc, m->apicid_mcp55, 0x11, res->base);
|
||||
}
|
||||
|
||||
dword = 0x43c6c643;
|
||||
pci_write_config32(dev, 0x7c, dword);
|
||||
|
||||
dword = 0x81001a00;
|
||||
pci_write_config32(dev, 0x80, dword);
|
||||
|
||||
dword = 0xd00002d2;
|
||||
pci_write_config32(dev, 0x84, dword);
|
||||
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
||||
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
|
||||
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x1, m->apicid_mcp55, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, m->apicid_mcp55, 0x2);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x3, m->apicid_mcp55, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x4, m->apicid_mcp55, 0x4);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x6, m->apicid_mcp55, 0x6);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x7, m->apicid_mcp55, 0x7);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x8, m->apicid_mcp55, 0x8);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xc, m->apicid_mcp55, 0xc);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xd, m->apicid_mcp55, 0xd);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xe, m->apicid_mcp55, 0xe);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0xf, m->apicid_mcp55, 0xf);
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+1)<<2)|1, m->apicid_mcp55, 0xa);
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|0, m->apicid_mcp55, 0x16); // 22
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+2)<<2)|1, m->apicid_mcp55, 0x17); // 23
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|0, m->apicid_mcp55, 0x14); // 20
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|1, m->apicid_mcp55, 0x17); // 23
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+5)<<2)|2, m->apicid_mcp55, 0x15); // 21
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+8)<<2)|0, m->apicid_mcp55, 0x16); // 22
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[0], ((sbdn+9)<<2)|0, m->apicid_mcp55, 0x15); // 21
|
||||
|
||||
for(j=7; j>=2; j--) {
|
||||
if(!m->bus_mcp55[j]) continue;
|
||||
for(i=0;i<4;i++) {
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[j], (0x00<<2)|i, m->apicid_mcp55, 0x10 + (2+j+i+4-sbdn%4)%4);
|
||||
}
|
||||
}
|
||||
|
||||
for(j=0; j<1; j++)
|
||||
for(i=0;i<4;i++) {
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, m->bus_mcp55[1], ((0x04+j)<<2)|i, m->apicid_mcp55, 0x10 + (2+i+j)%4);
|
||||
}
|
||||
|
||||
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
|
||||
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x0);
|
||||
smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, m->bus_isa, 0x0, MP_APIC_ALL, 0x1);
|
||||
/* There is no extension information... */
|
||||
|
||||
/* Compute the checksums */
|
||||
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
|
||||
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
|
||||
printk_debug("Wrote the mp table end at: %p - %p\n",
|
||||
mc, smp_next_mpe_entry(mc));
|
||||
return smp_next_mpe_entry(mc);
|
||||
}
|
||||
|
||||
unsigned long write_smp_table(unsigned long addr)
|
||||
{
|
||||
void *v;
|
||||
v = smp_write_floating_table(addr);
|
||||
return (unsigned long)smp_write_config_table(v);
|
||||
}
|
||||
|
|
@ -0,0 +1,283 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 AMD
|
||||
* Written by Yinghai Lu <yinghailu@amd.com> for AMD.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
static void setup_mb_resource_map(void)
|
||||
{
|
||||
static const unsigned int register_values[] = {
|
||||
/* Careful set limit registers before base registers which contain the enables */
|
||||
/* DRAM Limit i Registers
|
||||
* F1:0x44 i = 0
|
||||
* F1:0x4C i = 1
|
||||
* F1:0x54 i = 2
|
||||
* F1:0x5C i = 3
|
||||
* F1:0x64 i = 4
|
||||
* F1:0x6C i = 5
|
||||
* F1:0x74 i = 6
|
||||
* F1:0x7C i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 3] Reserved
|
||||
* [10: 8] Interleave select
|
||||
* specifies the values of A[14:12] to use with interleave enable.
|
||||
* [15:11] Reserved
|
||||
* [31:16] DRAM Limit Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
// PCI_ADDR(CBB, CDB, 1, 0x44), 0x0000f8f8, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||
|
||||
/* DRAM Base i Registers
|
||||
* F1:0x40 i = 0
|
||||
* F1:0x48 i = 1
|
||||
* F1:0x50 i = 2
|
||||
* F1:0x58 i = 3
|
||||
* F1:0x60 i = 4
|
||||
* F1:0x68 i = 5
|
||||
* F1:0x70 i = 6
|
||||
* F1:0x78 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 7: 2] Reserved
|
||||
* [10: 8] Interleave Enable
|
||||
* 000 = No interleave
|
||||
* 001 = Interleave on A[12] (2 nodes)
|
||||
* 010 = reserved
|
||||
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||
* 100 = reserved
|
||||
* 101 = reserved
|
||||
* 110 = reserved
|
||||
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||
* [15:11] Reserved
|
||||
* [13:16] DRAM Base Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40-bit address
|
||||
* that define the start of the DRAM region.
|
||||
*/
|
||||
// PCI_ADDR(CBB, CDB, 1, 0x40), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x48), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x50), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x58), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x60), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x68), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x70), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x78), 0x0000f8fc, 0x00000000,
|
||||
|
||||
/* Memory-Mapped I/O Limit i Registers
|
||||
* F1:0x84 i = 0
|
||||
* F1:0x8C i = 1
|
||||
* F1:0x94 i = 2
|
||||
* F1:0x9C i = 3
|
||||
* F1:0xA4 i = 4
|
||||
* F1:0xAC i = 5
|
||||
* F1:0xB4 i = 6
|
||||
* F1:0xBC i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = Reserved
|
||||
* [ 6: 6] Reserved
|
||||
* [ 7: 7] Non-Posted
|
||||
* 0 = CPU writes may be posted
|
||||
* 1 = CPU writes must be non-posted
|
||||
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||
* This field defines the upp adddress bits of a 40-bit address that
|
||||
* defines the end of a memory-mapped I/O region n
|
||||
*/
|
||||
PCI_ADDR(CBB, CDB, 1, 0x84), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x8C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x94), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x9C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xA4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xAC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xB4), 0x00000048, 0x00000000,
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xBC), 0x00000048, 0x00ffff00,
|
||||
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
* F1:0x88 i = 1
|
||||
* F1:0x90 i = 2
|
||||
* F1:0x98 i = 3
|
||||
* F1:0xA0 i = 4
|
||||
* F1:0xA8 i = 5
|
||||
* F1:0xB0 i = 6
|
||||
* F1:0xB8 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Cpu Disable
|
||||
* 0 = Cpu can use this I/O range
|
||||
* 1 = Cpu requests do not use this I/O range
|
||||
* [ 3: 3] Lock
|
||||
* 0 = base/limit registers i are read/write
|
||||
* 1 = base/limit registers i are read-only
|
||||
* [ 7: 4] Reserved
|
||||
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||
* This field defines the upper address bits of a 40bit address
|
||||
* that defines the start of memory-mapped I/O region i
|
||||
*/
|
||||
PCI_ADDR(CBB, CDB, 1, 0x80), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x88), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x90), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0x98), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xB0), 0x000000f0, 0x00000000,
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xB8), 0x000000f0, 0x00fc0003,
|
||||
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
* F1:0xCC i = 1
|
||||
* F1:0xD4 i = 2
|
||||
* F1:0xDC i = 3
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = reserved
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Limit Address i
|
||||
* This field defines the end of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xC4), 0xFE000FC8, 0x00007000,
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xCC), 0xFE000FC8, 0x01fff020, // need to talk to ANALOG of second CK804 to release PCI E reset
|
||||
PCI_ADDR(CBB, CDB, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||
|
||||
/* PCI I/O Base i Registers
|
||||
* F1:0xC0 i = 0
|
||||
* F1:0xC8 i = 1
|
||||
* F1:0xD0 i = 2
|
||||
* F1:0xD8 i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 3: 2] Reserved
|
||||
* [ 4: 4] VGA Enable
|
||||
* 0 = VGA matches Disabled
|
||||
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||
* [ 5: 5] ISA Enable
|
||||
* 0 = ISA matches Disabled
|
||||
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||
* from matching agains this base/limit pair
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Base i
|
||||
* This field defines the start of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xC0), 0xFE000FCC, 0x00000033,
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xC8), 0xFE000FCC, 0x00008033,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||
|
||||
/* Config Base and Limit i Registers
|
||||
* F1:0xE0 i = 0
|
||||
* F1:0xE4 i = 1
|
||||
* F1:0xE8 i = 2
|
||||
* F1:0xEC i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Device Number Compare Enable
|
||||
* 0 = The ranges are based on bus number
|
||||
* 1 = The ranges are ranges of devices on bus 0
|
||||
* [ 3: 3] Reserved
|
||||
* [ 6: 4] Destination Node
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 7] Reserved
|
||||
* [ 9: 8] Destination Link
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 - Reserved
|
||||
* [15:10] Reserved
|
||||
* [23:16] Bus Number Base i
|
||||
* This field defines the lowest bus number in configuration region i
|
||||
* [31:24] Bus Number Limit i
|
||||
* This field defines the highest bus number in configuration region i
|
||||
*/
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xE0), 0x0000FC88, 0x3f000003, /* link 0 of cpu 0 --> Nvidia MCP55 Pro */
|
||||
// PCI_ADDR(CBB, CDB, 1, 0xE4), 0x0000FC88, 0x7f400203, /* link 2 of cpu 0 --> nvidia io55 */
|
||||
PCI_ADDR(CBB, CDB, 1, 0xE8), 0x0000FC88, 0x00000000,
|
||||
PCI_ADDR(CBB, CDB, 1, 0xEC), 0x0000FC88, 0x00000000,
|
||||
|
||||
};
|
||||
|
||||
int max;
|
||||
max = sizeof(register_values)/sizeof(register_values[0]);
|
||||
setup_resource_map(register_values, max);
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,110 @@
|
|||
/*
|
||||
* This file is part of the coreboot project.
|
||||
*
|
||||
* Copyright (C) 2007 Advanced Micro Devices, Inc.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
*/
|
||||
|
||||
/**
|
||||
* This file defines the SPD addresses for the mainboard. Must be included in
|
||||
* cache_as_ram_auto.c
|
||||
*/
|
||||
|
||||
#define RC00 0
|
||||
#define RC01 1
|
||||
#define RC02 2
|
||||
#define RC03 3
|
||||
#define RC04 4
|
||||
#define RC05 5
|
||||
#define RC06 6
|
||||
#define RC07 7
|
||||
#define RC08 8
|
||||
#define RC09 9
|
||||
#define RC10 10
|
||||
#define RC11 11
|
||||
#define RC12 12
|
||||
#define RC13 13
|
||||
#define RC14 14
|
||||
#define RC15 15
|
||||
#define RC16 16
|
||||
#define RC17 17
|
||||
#define RC18 18
|
||||
#define RC19 19
|
||||
#define RC20 20
|
||||
#define RC21 21
|
||||
#define RC22 22
|
||||
#define RC23 23
|
||||
#define RC24 24
|
||||
#define RC25 25
|
||||
#define RC26 26
|
||||
#define RC27 27
|
||||
#define RC28 28
|
||||
#define RC29 29
|
||||
#define RC30 30
|
||||
#define RC31 31
|
||||
|
||||
#define RC32 32
|
||||
#define RC33 33
|
||||
#define RC34 34
|
||||
#define RC35 35
|
||||
#define RC36 36
|
||||
#define RC37 37
|
||||
#define RC38 38
|
||||
#define RC39 39
|
||||
#define RC40 40
|
||||
#define RC41 41
|
||||
#define RC42 42
|
||||
#define RC43 43
|
||||
#define RC44 44
|
||||
#define RC45 45
|
||||
#define RC46 46
|
||||
#define RC47 47
|
||||
#define RC48 48
|
||||
#define RC49 49
|
||||
#define RC50 50
|
||||
#define RC51 51
|
||||
#define RC52 52
|
||||
#define RC53 53
|
||||
#define RC54 54
|
||||
#define RC55 55
|
||||
#define RC56 56
|
||||
#define RC57 57
|
||||
#define RC58 58
|
||||
#define RC59 59
|
||||
#define RC60 60
|
||||
#define RC61 61
|
||||
#define RC62 62
|
||||
#define RC63 63
|
||||
|
||||
|
||||
#define DIMM0 0x50
|
||||
#define DIMM1 0x51
|
||||
#define DIMM2 0x52
|
||||
#define DIMM3 0x53
|
||||
#define DIMM4 0x54
|
||||
#define DIMM5 0x55
|
||||
#define DIMM6 0x56
|
||||
#define DIMM7 0x57
|
||||
|
||||
|
||||
static const u8 spd_addr[] = {
|
||||
//first node
|
||||
RC00, DIMM0, DIMM2, 0, 0, DIMM1, DIMM3, 0, 0,
|
||||
#if CONFIG_MAX_PHYSICAL_CPUS > 1
|
||||
//second node
|
||||
RC00, DIMM4, DIMM6, 0, 0, DIMM5, DIMM7, 0, 0,
|
||||
#endif
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
target tyan_s2912_fam10
|
||||
mainboard tyan/s2912_fam10
|
||||
|
||||
__COMPRESSION__
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FALLBACK_IMAGE=0
|
||||
option ROM_IMAGE_SIZE=0x3f0000
|
||||
option XIP_ROM_SIZE=0x40000
|
||||
option COREBOOT_EXTRA_VERSION=".0-fallback"
|
||||
payload __PAYLOAD__
|
||||
end
|
||||
|
||||
romimage "failover"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option ROM_IMAGE_SIZE=0x3f0000
|
||||
option XIP_ROM_SIZE=0x40000
|
||||
option COREBOOT_EXTRA_VERSION=".0-failover"
|
||||
payload __PAYLOAD__
|
||||
end
|
||||
|
||||
buildrom ./coreboot.rom ROM_SIZE "fallback" "failover"
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007 AMD
|
||||
## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
# Sample config file for s2912
|
||||
|
||||
target s2912_fam10
|
||||
mainboard tyan/s2912_fam10
|
||||
|
||||
# This builds a fallback-only BIOS that fits in a 512K ROM. The S2912 onboard
|
||||
# flash is 1024K, so for use with that pad resulting ROM with 512KB lead-in.
|
||||
|
||||
# Make room for ES1000 VGA ROM
|
||||
option ROM_SIZE=(512-44)*1024
|
||||
|
||||
# serengeti_leopard
|
||||
romimage "normal"
|
||||
# 48K for SCSI FW
|
||||
# option ROM_SIZE = 475136
|
||||
# 48K for SCSI FW and 48K for ATI ROM
|
||||
# option ROM_SIZE = 425984
|
||||
# 64K for Etherboot
|
||||
# option ROM_SIZE = 458752
|
||||
# 44k for atixx.rom
|
||||
# option ROM_SIZE = 479232
|
||||
option USE_FAILOVER_IMAGE=0
|
||||
option USE_FALLBACK_IMAGE=0
|
||||
# option ROM_IMAGE_SIZE=0x13800
|
||||
# option ROM_IMAGE_SIZE=0x18800
|
||||
option ROM_IMAGE_SIZE=0x20000
|
||||
# option ROM_IMAGE_SIZE=0x15800
|
||||
option XIP_ROM_SIZE=0x40000
|
||||
option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
|
||||
# payload ../../../payloads/tg3--ide_disk.zelf
|
||||
# payload ../../../payloads/filo.elf
|
||||
# payload ../../../payloads/filo_mem.elf
|
||||
# payload ../../../payloads/filo.zelf
|
||||
# payload ../../../payloads/tg3--filo_hda2.zelf
|
||||
# payload ../../../payloads/tg3.zelf
|
||||
# payload ../../../../payloads/tg3_vga.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
|
||||
# payload ../../../../payloads/forcedeth--filo_hda2_vga.zelf
|
||||
payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf
|
||||
# payload ../../../payloads/tg3_com2.zelf
|
||||
# payload ../../../payloads/e1000--filo.zelf
|
||||
# payload ../../../payloads/tg3--e1000--filo.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
|
||||
end
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FAILOVER_IMAGE=0
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
# option ROM_IMAGE_SIZE=0x13800
|
||||
# option ROM_IMAGE_SIZE=0x19800
|
||||
option ROM_IMAGE_SIZE=0x20000
|
||||
# option ROM_IMAGE_SIZE=0x15800
|
||||
option XIP_ROM_SIZE=0x20000
|
||||
option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
|
||||
# payload ../../../payloads/tg3--ide_disk.zelf
|
||||
# payload ../../../payloads/filo.elf
|
||||
# payload ../../../payloads/filo_mem.elf
|
||||
# payload ../../../payloads/filo.zelf
|
||||
# payload ../../../payloads/tg3--filo_hda2.zelf
|
||||
# payload ../../../payloads/tg3.zelf
|
||||
# payload ../../../../payloads/tg3_vga.zelf
|
||||
# payload ../../../../payloads/memtest
|
||||
# payload ../../../../payloads/e1000_vga.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
|
||||
# payload ../../../../payloads/filo_hda.zelf
|
||||
# payload ../../../../payloads/adlo.elf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
|
||||
# payload ../../../../payloads/forcedeth_mcp55_filo_hda2.zelf
|
||||
payload ../../../../payloads/forcedeth--filo_hda2_vga_5_4_2_mcp55.zelf
|
||||
# payload ../../../../payloads/forcedeth--filo_hda2_vga.zelf
|
||||
# payload ../../../payloads/tg3_com2.zelf
|
||||
# payload ../../../payloads/e1000--filo.zelf
|
||||
# payload ../../../payloads/tg3--e1000--filo.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
|
||||
end
|
||||
|
||||
romimage "failover"
|
||||
option USE_FAILOVER_IMAGE=1
|
||||
option USE_FALLBACK_IMAGE=0
|
||||
option ROM_IMAGE_SIZE=FAILOVER_SIZE
|
||||
option XIP_ROM_SIZE=FAILOVER_SIZE
|
||||
option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
|
||||
end
|
||||
|
||||
#buildrom ./coreboot.rom ROM_SIZE "normal" "failover"
|
||||
buildrom ./coreboot.rom ROM_SIZE "fallback" "failover"
|
||||
|
|
@ -0,0 +1,77 @@
|
|||
##
|
||||
## This file is part of the coreboot project.
|
||||
##
|
||||
## Copyright (C) 2007 AMD
|
||||
## Written by Yinghai Lu <yinghailu@gmail.com> for AMD.
|
||||
##
|
||||
## This program is free software; you can redistribute it and/or modify
|
||||
## it under the terms of the GNU General Public License as published by
|
||||
## the Free Software Foundation; either version 2 of the License, or
|
||||
## (at your option) any later version.
|
||||
##
|
||||
## This program is distributed in the hope that it will be useful,
|
||||
## but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
## GNU General Public License for more details.
|
||||
##
|
||||
## You should have received a copy of the GNU General Public License
|
||||
## along with this program; if not, write to the Free Software
|
||||
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||
##
|
||||
|
||||
# Sample config file for s2912
|
||||
|
||||
target s2912
|
||||
mainboard tyan/s2912
|
||||
|
||||
option ROM_SIZE=0x200000
|
||||
option FALLBACK_SIZE=(ROM_SIZE-0x1000)
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FAILOVER_IMAGE=0
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option CONFIG_COMPRESSED_PAYLOAD_LZMA=1
|
||||
option CONFIG_PRECOMPRESSED_PAYLOAD=1
|
||||
# option ROM_IMAGE_SIZE=0x19800
|
||||
option ROM_IMAGE_SIZE=0x17000
|
||||
# option ROM_IMAGE_SIZE=0x15800
|
||||
# option ROM_IMAGE_SIZE=0x13800
|
||||
option XIP_ROM_SIZE=0x40000
|
||||
option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
|
||||
# payload ../../../payloads/tg3--ide_disk.zelf
|
||||
# payload ../../../payloads/filo.elf
|
||||
# payload ../../../payloads/filo_mem.elf
|
||||
# payload ../../../payloads/filo.zelf
|
||||
# payload ../../../payloads/tg3--filo_hda2.zelf
|
||||
# payload ../../../payloads/tg3.zelf
|
||||
# payload ../../../../payloads/tg3_vga.zelf
|
||||
# payload ../../../../payloads/memtest
|
||||
# payload ../../../../payloads/adlo.elf
|
||||
# payload ../../../../payloads/e1000_vga.zelf
|
||||
# payload ../../../../payloads/filo_hda.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga_5_4.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga_5.4.1.zelf
|
||||
# payload ../../../../payloads/tg3--filo_hda2_vga_5.4.2.zelf
|
||||
payload /home/yhlu/olpc-payload.elf.lzma
|
||||
# payload ../../../../payloads/filo_hda.zelf
|
||||
# payload ../../../../payloads/filo_hda2_novga.zelf
|
||||
# payload ../../../payloads/tg3_com2.zelf
|
||||
# payload ../../../payloads/e1000--filo.zelf
|
||||
# payload ../../../payloads/tg3--e1000--filo.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_5.3.zelf
|
||||
# payload ../../../payloads/tg3--eepro100--e1000--filo_hda2_com2.zelf
|
||||
end
|
||||
|
||||
romimage "failover"
|
||||
option USE_FAILOVER_IMAGE=1
|
||||
option USE_FALLBACK_IMAGE=0
|
||||
option ROM_IMAGE_SIZE=FAILOVER_SIZE
|
||||
option XIP_ROM_SIZE=FAILOVER_SIZE
|
||||
option COREBOOT_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover"
|
||||
end
|
||||
|
||||
|
||||
buildrom ./coreboot.rom ROM_SIZE "fallback" "failover"
|
||||
#buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
|
||||
Loading…
Reference in New Issue