GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/google/kahlee: use override devicetrees for variants 

This helps with deduplicating the identical parts of the variants'
devicetrees.

Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie050c4624327b904e8cb0959b40421339e43f825
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68634
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
This commit is contained in:
Felix Held 2022-10-20 23:06:56 +02:00
parent fed17f968d
commit 34362d0c0f
10 changed files with 204 additions and 576 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
src/mainboard/google/kahlee/Kconfig
View File

@ -64,7 +64,10 @@ config MAINBOARD_PART_NUMBER
default "Treeya" if BOARD_GOOGLE_TREEYA
config DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/devicetree.cb"
default "variants/baseboard/devicetree.cb"
config OVERRIDE_DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAINBOARD_FAMILY
string

151
src/mainboard/google/kahlee/variants/aleena/devicetree.cb
View File

@ -1,151 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "spd_addr_lookup" = "
{
{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
}"
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "32 * MiB"
register "stapm_percent" = "80"
register "stapm_time_ms" = "2500000"
register "stapm_power_mw" = "7800"
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 95,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 45,
.fall_time_ns = 4,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 26,
.fall_time_ns = 11,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 20,
.fall_time_ns = 19,
}"
register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
GPIO_I2C2_SCL | GPIO_I2C3_SCL"
device domain 0 on
device ref iommu off end # IOMMU (Disabled for performance and battery)
device ref gfx on end
device ref gfx_hda on end
device ref gpp_bridge_1 on end # WLAN
device ref gpp_bridge_3 on
chip drivers/generic/bayhub
register "power_saving" = "1"
device pci 00.0 on end
end
end
device ref hda_bridge on end
device ref hda on end
device ref xhci on end
device ref ehci on end
device ref lpc_bridge on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device ref sdhci on end
end #domain
device ref i2c_0 on
chip drivers/generic/adau7002
device generic 0.0 on end
end
chip drivers/i2c/da7219
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
register "jack_det_rate" = ""32ms_64ms""
register "jack_rem_deb" = "1"
register "a_d_btn_thr" = "0xa"
register "d_b_btn_thr" = "0x16"
register "b_c_btn_thr" = "0x21"
register "c_mic_btn_thr" = "0x3e"
register "btn_avg" = "4"
register "adc_1bit_rpt" = "1"
register "micbias_lvl" = "2600"
register "mic_amp_in_sel" = ""diff""
register "mclk_name" = ""oscout1""
device i2c 1a on end
end
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
register "sdmode_delay" = "5"
device generic 0.1 on end
end
end
device ref i2c_1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "desc" = ""Cr50 TPM""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
device i2c 50 on end
end
end
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "wake" = "7"
register "detect" = "1"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "generic.wake" = "7"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end
device ref i2c_3 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
end
end #chip soc/amd/stoneyridge

70
src/mainboard/google/kahlee/variants/aleena/overridetree.cb Normal file
View File

@ -0,0 +1,70 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "stapm_percent" = "80"
register "stapm_time_ms" = "2500000"
register "stapm_power_mw" = "7800"
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 95,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 45,
.fall_time_ns = 4,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 26,
.fall_time_ns = 11,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 20,
.fall_time_ns = 19,
}"
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "wake" = "7"
register "detect" = "1"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "generic.wake" = "7"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end
device ref i2c_3 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
end
end #chip soc/amd/stoneyridge

46
src/mainboard/google/kahlee/variants/grunt/devicetree.cb → src/mainboard/google/kahlee/variants/baseboard/devicetree.cb
View File

@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
@ -8,38 +9,6 @@ chip soc/amd/stoneyridge
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "32 * MiB"
register "stapm_percent" = "80"
register "stapm_time_ms" = "2500000"
register "stapm_power_mw" = "7800"
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 95,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 62,
.fall_time_ns = 2,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 170,
.fall_time_ns = 91,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 84,
.fall_time_ns = 50,
}"
register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
GPIO_I2C2_SCL | GPIO_I2C3_SCL"
@ -66,6 +35,7 @@ chip soc/amd/stoneyridge
end
device ref sdhci on end
end #domain
device ref i2c_0 on
chip drivers/generic/adau7002
device generic 0.0 on end
@ -113,18 +83,6 @@ chip soc/amd/stoneyridge
end
end
device ref i2c_3 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""

85
src/mainboard/google/kahlee/variants/careena/devicetree.cb → src/mainboard/google/kahlee/variants/careena/overridetree.cb
View File

@ -1,13 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "spd_addr_lookup" = "
{
{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
}"
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "32 * MiB"
register "stapm_percent" = "68"
register "stapm_time_ms" = "2500000"
register "stapm_power_mw" = "7800"
@ -41,54 +34,11 @@ chip soc/amd/stoneyridge
.fall_time_ns = 19,
}"
register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
GPIO_I2C2_SCL | GPIO_I2C3_SCL"
device domain 0 on
device ref iommu off end # IOMMU (Disabled for performance and battery)
device ref gfx on end
device ref gfx_hda on end
device ref gpp_bridge_1 on end # WLAN
device ref gpp_bridge_3 on
chip drivers/generic/bayhub
register "power_saving" = "1"
device pci 00.0 on end
end
end
device ref hda_bridge on end
device ref hda on end
device ref xhci on end
device ref ehci on end
device ref lpc_bridge on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device ref sdhci on end
end #domain
device ref i2c_0 on
chip drivers/generic/adau7002
register "wakeup_delay" = "20"
device generic 0.0 on end
end
chip drivers/i2c/da7219
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
register "jack_det_rate" = ""32ms_64ms""
register "jack_rem_deb" = "1"
register "a_d_btn_thr" = "0xa"
register "d_b_btn_thr" = "0x16"
register "b_c_btn_thr" = "0x21"
register "c_mic_btn_thr" = "0x3e"
register "btn_avg" = "4"
register "adc_1bit_rpt" = "1"
register "micbias_lvl" = "2600"
register "mic_amp_in_sel" = ""diff""
register "mclk_name" = ""oscout1""
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""10EC5682""
register "name" = ""RT58""
@ -104,29 +54,6 @@ chip soc/amd/stoneyridge
register "property_list[1].string" = ""oscout1""
device i2c 1a on end
end
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
register "sdmode_delay" = "5"
device generic 0.1 on end
end
end
device ref i2c_1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "desc" = ""Cr50 TPM""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
device i2c 50 on end
end
end
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "wake" = "7"
device i2c 15 on end
end
end
device ref i2c_3 on
chip drivers/i2c/generic
@ -141,18 +68,6 @@ chip soc/amd/stoneyridge
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""GTCH7503""
register "generic.desc" = ""G2TOUCH Touchscreen""

51
src/mainboard/google/kahlee/variants/grunt/overridetree.cb Normal file
View File

@ -0,0 +1,51 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "stapm_percent" = "80"
register "stapm_time_ms" = "2500000"
register "stapm_power_mw" = "7800"
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 95,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 62,
.fall_time_ns = 2,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 170,
.fall_time_ns = 91,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 84,
.fall_time_ns = 50,
}"
device ref i2c_3 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
end
end #chip soc/amd/stoneyridge

151
src/mainboard/google/kahlee/variants/liara/devicetree.cb
View File

@ -1,151 +0,0 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "spd_addr_lookup" = "
{
{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
}"
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "32 * MiB"
register "lvds_poseq_varybl_to_blon" = "0x5" # in 4ms
register "lvds_poseq_blon_to_varybl" = "0x5" # in 4ms
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 85,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 3,
.fall_time_ns = 2,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 3,
.fall_time_ns = 2,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 16,
.fall_time_ns = 8,
}"
register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
GPIO_I2C2_SCL | GPIO_I2C3_SCL"
device domain 0 on
device ref iommu off end # IOMMU (Disabled for performance and battery)
device ref gfx on end
device ref gfx_hda on end
device ref gpp_bridge_1 on end # WLAN
device ref gpp_bridge_3 on
chip drivers/generic/bayhub
register "power_saving" = "1"
device pci 00.0 on end
end
end
device ref hda_bridge on end
device ref hda on end
device ref xhci on end
device ref ehci on end
device ref lpc_bridge on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device ref sdhci on end
end #domain
device ref i2c_0 on
chip drivers/generic/adau7002
register "wakeup_delay" = "20"
device generic 0.0 on end
end
chip drivers/i2c/da7219
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
register "jack_det_rate" = ""32ms_64ms""
register "jack_rem_deb" = "1"
register "a_d_btn_thr" = "0xa"
register "d_b_btn_thr" = "0x16"
register "b_c_btn_thr" = "0x21"
register "c_mic_btn_thr" = "0x3e"
register "btn_avg" = "4"
register "adc_1bit_rpt" = "1"
register "micbias_lvl" = "2600"
register "mic_amp_in_sel" = ""diff""
register "mclk_name" = ""oscout1""
device i2c 1a on end
end
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
register "sdmode_delay" = "5"
device generic 0.1 on end
end
end
device ref i2c_1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "desc" = ""Cr50 TPM""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
device i2c 50 on end
end
end
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "wake" = "7"
register "detect" = "1"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "generic.wake" = "7"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end
device ref i2c_3 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
end
end #chip soc/amd/stoneyridge

75
src/mainboard/google/kahlee/variants/liara/overridetree.cb Normal file
View File

@ -0,0 +1,75 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "lvds_poseq_varybl_to_blon" = "0x5" # in 4ms
register "lvds_poseq_blon_to_varybl" = "0x5" # in 4ms
# Enable I2C0 for audio, USB3 hub at 400kHz
register "i2c[0]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 85,
.fall_time_ns = 3,
}"
# Enable I2C1 for H1 at 400kHz
register "i2c[1]" = "{
.early_init = 1,
.speed = I2C_SPEED_FAST,
.rise_time_ns = 3,
.fall_time_ns = 2,
}"
# Enable I2C2 for trackpad, pen at 400kHz
register "i2c[2]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 3,
.fall_time_ns = 2,
}"
# Enable I2C3 for touchscreen at 400kHz
register "i2c[3]" = "{
.speed = I2C_SPEED_FAST,
.rise_time_ns = 16,
.fall_time_ns = 8,
}"
device ref i2c_0 on
chip drivers/generic/adau7002
register "wakeup_delay" = "20"
device generic 0.0 on end
end
end
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "wake" = "7"
register "detect" = "1"
device i2c 15 on end
end
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
register "generic.irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_5)"
register "generic.wake" = "7"
register "generic.detect" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end
device ref i2c_3 on
chip drivers/i2c/generic
register "hid" = ""RAYD0001""
register "desc" = ""Raydium Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 39 on end
end
end
end #chip soc/amd/stoneyridge

74
src/mainboard/google/kahlee/variants/nuwani/devicetree.cb → src/mainboard/google/kahlee/variants/nuwani/overridetree.cb
View File

@ -1,13 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "spd_addr_lookup" = "
{
{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
}"
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "32 * MiB"
register "stapm_percent" = "80"
register "stapm_time_ms" = "2000000"
register "stapm_power_mw" = "7800"
@ -44,14 +37,7 @@ chip soc/amd/stoneyridge
.fall_time_ns = 8,
}"
register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
GPIO_I2C2_SCL | GPIO_I2C3_SCL"
device domain 0 on
device ref iommu off end # IOMMU (Disabled for performance and battery)
device ref gfx on end
device ref gfx_hda on end
device ref gpp_bridge_1 on end # WLAN
device ref gpp_bridge_3 on
chip drivers/generic/bayhub
register "power_saving" = "1"
@ -59,54 +45,8 @@ chip soc/amd/stoneyridge
device pci 00.0 on end
end
end
device ref hda_bridge on end
device ref hda on end
device ref xhci on end
device ref ehci on end
device ref lpc_bridge on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device ref sdhci on end
end #domain
device ref i2c_0 on
chip drivers/generic/adau7002
device generic 0.0 on end
end
chip drivers/i2c/da7219
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
register "jack_det_rate" = ""32ms_64ms""
register "jack_rem_deb" = "1"
register "a_d_btn_thr" = "0xa"
register "d_b_btn_thr" = "0x16"
register "b_c_btn_thr" = "0x21"
register "c_mic_btn_thr" = "0x3e"
register "btn_avg" = "4"
register "adc_1bit_rpt" = "1"
register "micbias_lvl" = "2600"
register "mic_amp_in_sel" = ""diff""
register "mclk_name" = ""oscout1""
device i2c 1a on end
end
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
register "sdmode_delay" = "5"
device generic 0.1 on end
end
end
device ref i2c_1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "desc" = ""Cr50 TPM""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
device i2c 50 on end
end
end
device ref i2c_2 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
@ -165,17 +105,5 @@ chip soc/amd/stoneyridge
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
end
end #chip soc/amd/stoneyridge

72
src/mainboard/google/kahlee/variants/treeya/devicetree.cb → src/mainboard/google/kahlee/variants/treeya/overridetree.cb
View File

@ -1,13 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
chip soc/amd/stoneyridge
register "spd_addr_lookup" = "
{
{ {0xA0, 0x00} }, // socket 0 - Channel 0, slot 0
}"
register "dram_clear_on_reset" = "DRAM_CONTENTS_KEEP"
register "uma_mode" = "UMAMODE_SPECIFIED_SIZE"
register "uma_size" = "32 * MiB"
register "stapm_percent" = "80"
register "stapm_time_ms" = "2000000"
register "stapm_power_mw" = "7800"
@ -44,14 +37,7 @@ chip soc/amd/stoneyridge
.fall_time_ns = 8,
}"
register "i2c_scl_reset" = "GPIO_I2C0_SCL | GPIO_I2C1_SCL | \
GPIO_I2C2_SCL | GPIO_I2C3_SCL"
device domain 0 on
device ref iommu off end # IOMMU (Disabled for performance and battery)
device ref gfx on end
device ref gfx_hda on end
device ref gpp_bridge_1 on end # WLAN
device ref gpp_bridge_3 on
chip drivers/generic/bayhub
register "power_saving" = "1"
@ -59,39 +45,9 @@ chip soc/amd/stoneyridge
device pci 00.0 on end
end
end
device ref hda_bridge on end
device ref hda on end
device ref xhci on end
device ref ehci on end
device ref lpc_bridge on
chip ec/google/chromeec
device pnp 0c09.0 on end
end
end
device ref sdhci on end
end #domain
device ref i2c_0 on
chip drivers/generic/adau7002
device generic 0.0 on end
end
chip drivers/i2c/da7219
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_14)"
register "btn_cfg" = "50"
register "mic_det_thr" = "500"
register "jack_ins_deb" = "20"
register "jack_det_rate" = ""32ms_64ms""
register "jack_rem_deb" = "1"
register "a_d_btn_thr" = "0xa"
register "d_b_btn_thr" = "0x16"
register "b_c_btn_thr" = "0x21"
register "c_mic_btn_thr" = "0x3e"
register "btn_avg" = "4"
register "adc_1bit_rpt" = "1"
register "micbias_lvl" = "2600"
register "mic_amp_in_sel" = ""diff""
register "mclk_name" = ""oscout1""
device i2c 1a on end
end
chip drivers/i2c/generic
register "hid" = ""10EC5682""
register "name" = ""RT58""
@ -107,20 +63,6 @@ chip soc/amd/stoneyridge
register "property_list[1].string" = ""oscout1""
device i2c 1a on end
end
chip drivers/generic/max98357a
register "hid" = ""MX98357A""
register "sdmode_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_119)"
register "sdmode_delay" = "5"
device generic 0.1 on end
end
end
device ref i2c_1 on
chip drivers/i2c/tpm
register "hid" = ""GOOG0005""
register "desc" = ""Cr50 TPM""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_LOW(GPIO_9)"
device i2c 50 on end
end
end
device ref i2c_2 on
chip drivers/i2c/generic
@ -167,17 +109,5 @@ chip soc/amd/stoneyridge
register "has_power_resource" = "1"
device i2c 39 on end
end
chip drivers/i2c/generic
register "hid" = ""ELAN0001""
register "desc" = ""ELAN Touchscreen""
register "probed" = "1"
register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPIO_11)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_85)"
register "reset_delay_ms" = "20"
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPIO_76)"
register "enable_delay_ms" = "1"
register "has_power_resource" = "1"
device i2c 10 on end
end
end
end #chip soc/amd/stoneyridge