mb/google/octopus: Implement touchscreen/digitizer power sequencing

For octopus variants with a touchscreen/digitizer, drive the enable and
reset GPIOs high in romstage, then disable the reset GPIOs in ramstage.
Where available, only set the GPIOs for SKUs which have a touchscreen.
This will allow coreboot to detect the presence of i2c touchscreens
during ACPI SSDT generation (implemented in a subsequent commit).

TEST=tested with rest of patch train

Change-Id: Ia725b4054069c0a4f60afd7e0bca6e2fd5fdcbba
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63212
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/google/octopus/variants/ampton/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 
 smm-y += gpio.c

src/mainboard/google/octopus/variants/ampton/gpio.c

@@ -53,13 +53,14 @@ static const struct pad_config variant_override_table[] = {
 	/* LPSS */
 	PAD_CFG_GPIO_HI_Z(GPIO_81, UP_20K, DEEP, HIZCRx0, DISPUPD), /* GPIO_81_DEBUG (Boot halt) -- MIPI60 DEBUG */
 	PAD_NC(GPIO_84, NONE), /* LPSS_SPI_2_CLK - unused */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),/* GPIO_105 -- TOUCHSCREEN_RST */
 	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, EDGE_BOTH, INVERT, HIZCRx1,
 				DISPUPD),/* GPIO_137 -- HP_INT_ODL */
 	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),/* GPIO_140 -- PEN_RESET */
 	PAD_NC(GPIO_143, UP_20K), /* GPIO_143 - NC */
 	PAD_NC(GPIO_144, UP_20K), /* GPIO_144 - PEN_EJECT */
 	PAD_NC(GPIO_145, UP_20K), /* GPIO_145 - PEN_EJECT */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD), /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD), /* EN_PP3300_TOUCHSCREEN */
 
 	/* AUDIO COMMUNITY GPIOS*/
 	PAD_NC(GPIO_157, DN_20K),/* AVS_I2S0_BCLK -- unused */
@@ -115,3 +116,20 @@ const struct pad_config *variant_early_gpio_table(size_t *num)
 	*num = ARRAY_SIZE(early_gpio_table);
 	return early_gpio_table;
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/bloog/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 ramstage-y += variant.c
 

src/mainboard/google/octopus/variants/bloog/gpio.c

@@ -30,8 +30,10 @@ static const struct pad_config default_override_table[] = {
 	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1,
 				DISPUPD),
 
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0,
 				     DISPUPD),
 };
 
@@ -40,3 +42,18 @@ const struct pad_config *variant_override_gpio_table(size_t *num)
 	*num = ARRAY_SIZE(default_override_table);
 	return default_override_table;
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/bobba/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 ramstage-y += variant.c
 

src/mainboard/google/octopus/variants/bobba/gpio.c

@@ -21,8 +21,11 @@ static const struct pad_config default_override_table[] = {
 				DISPUPD),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-				     DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
 };
@@ -36,8 +39,11 @@ static const struct pad_config lte_override_table[] = {
 				DISPUPD),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-				     DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
 
@@ -87,3 +93,20 @@ const struct pad_config *variant_early_override_gpio_table(size_t *num)
 
 	return lte_early_override_table;
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/dood/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 ramstage-y += variant.c
 

src/mainboard/google/octopus/variants/dood/gpio.c

@@ -16,8 +16,10 @@ enum {
 static const struct pad_config default_override_table[] = {
 	PAD_NC(GPIO_104, UP_20K),
 
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0,
 				     DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
@@ -27,8 +29,10 @@ static const struct pad_config lte_override_table[] = {
 	/* Default override table. */
 	PAD_NC(GPIO_104, UP_20K),
 
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0,
 				     DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
@@ -77,3 +81,18 @@ const struct pad_config *variant_early_override_gpio_table(size_t *num)
 
 	return lte_early_override_table;
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/fleex/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 
 ramstage-y += variant.c

src/mainboard/google/octopus/variants/fleex/gpio.c

@@ -23,7 +23,11 @@ static const struct pad_config default_override_table[] = {
 	PAD_NC(GPIO_145, UP_20K),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 
 	/* AVS_I2S1_MCLK -- PLT_RST_LTE_L */
 	PAD_CFG_GPO(GPIO_161, 1, DEEP),
@@ -56,3 +60,20 @@ const struct pad_config *variant_early_override_gpio_table(size_t *num)
 
 	return lte_early_override_table;
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/foob/Makefile.inc

@@ -1,3 +1,4 @@
 bootblock-y += gpio.c
+romstage-y += gpio.c
 ramstage-y += gpio.c
 ramstage-y += variant.c

src/mainboard/google/octopus/variants/foob/gpio.c

@@ -14,8 +14,11 @@ static const struct pad_config default_override_table[] = {
 	PAD_NC(GPIO_143, UP_20K),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-					DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_161, DN_20K),
 
@@ -67,3 +70,31 @@ const struct pad_config *variant_override_gpio_table(size_t *num)
 
 	return c;
 }
+
+/* Touchscreen GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_touch_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	const struct pad_config *c;
+	uint32_t sku_id;
+
+	sku_id = google_chromeec_get_board_sku();
+	if (no_touchscreen_sku(sku_id)) {
+		c = NULL;
+		*num = 0;
+	} else {
+		c = romstage_touch_gpio_table;
+		*num = ARRAY_SIZE(romstage_touch_gpio_table);
+	}
+
+	return c;
+}

src/mainboard/google/octopus/variants/garg/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 ramstage-y += variant.c
 

src/mainboard/google/octopus/variants/garg/gpio.c

@@ -14,9 +14,10 @@ static const struct pad_config default_override_table[] = {
 	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1,
 				DISPUPD),
 
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-				     DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
 };
@@ -35,9 +36,10 @@ static const struct pad_config hdmi_override_table[] = {
 	PAD_CFG_GPI_APIC_IOS(GPIO_137, NONE, DEEP, LEVEL, INVERT, HIZCRx1,
 				DISPUPD),
 
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-				     DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
 
@@ -52,8 +54,11 @@ static const struct pad_config lte_override_table[] = {
 				DISPUPD),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-				     DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_213, DN_20K),
 
@@ -108,3 +113,20 @@ const struct pad_config *variant_early_override_gpio_table(size_t *num)
 
 	return lte_early_override_table;
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/meep/Makefile.inc

@@ -1,5 +1,7 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
+
 ramstage-y += gpio.c
 ramstage-y += variant.c
 

src/mainboard/google/octopus/variants/meep/gpio.c

@@ -15,8 +15,11 @@ static const struct pad_config default_override_table[] = {
 				DISPUPD),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-				     DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 };
 
 static const struct pad_config hdmi_sku_override_table[] = {
@@ -34,8 +37,11 @@ static const struct pad_config hdmi_sku_override_table[] = {
 				DISPUPD),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-					DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 };
 
 const struct pad_config *variant_override_gpio_table(size_t *num)
@@ -55,3 +61,20 @@ const struct pad_config *variant_override_gpio_table(size_t *num)
 		return default_override_table;
 	}
 }
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}

src/mainboard/google/octopus/variants/phaser/Makefile.inc

@@ -1,5 +1,6 @@
 bootblock-y += gpio.c
 
+romstage-y += gpio.c
 romstage-y += memory.c
 
 ramstage-y += variant.c

src/mainboard/google/octopus/variants/phaser/gpio.c

@@ -19,8 +19,11 @@ static const struct pad_config default_override_table[] = {
 	PAD_NC(GPIO_143, UP_20K),
 
 	/* EN_PP3300_TOUCHSCREEN */
-	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 0, DEEP, NONE, Tx0RxDCRx0,
-					DISPUPD),
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
 
 	PAD_NC(GPIO_161, DN_20K),
 
@@ -79,3 +82,32 @@ const struct pad_config *variant_override_gpio_table(size_t *num)
 
 	return c;
 }
+
+
+/* Touchscreen GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_touch_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	const struct pad_config *c;
+	uint32_t sku_id = SKU_UNKNOWN;
+
+	google_chromeec_cbi_get_sku_id(&sku_id);
+	if (no_touchscreen_sku(sku_id)) {
+		c = NULL;
+		*num = 0;
+	} else {
+		c = romstage_touch_gpio_table;
+		*num = ARRAY_SIZE(romstage_touch_gpio_table);
+	}
+
+	return c;
+}

src/mainboard/google/octopus/variants/yorp/Makefile.inc

@@ -1 +1,2 @@
 bootblock-y += gpio.c
+romstage-y += gpio.c

src/mainboard/google/octopus/variants/yorp/gpio.c

@@ -38,3 +38,35 @@ const struct pad_config *variant_early_gpio_table(size_t *num)
 	*num = ARRAY_SIZE(early_gpio_table);
 	return early_gpio_table;
 }
+
+static const struct pad_config default_override_table[] = {
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 0, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(default_override_table);
+	return default_override_table;
+}
+
+/* GPIOs needed to be set in romstage. */
+static const struct pad_config romstage_gpio_table[] = {
+	/* Enable touchscreen, hold in reset */
+	 /* EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_146, 1, DEEP, NONE, Tx0RxDCRx0, DISPUPD),
+	/* GPIO_105 -- TOUCHSCREEN_RST */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_105, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+	/* GPIO_140 -- PEN_RESET */
+	PAD_CFG_GPO_IOSSTATE_IOSTERM(GPIO_140, 1, DEEP, NONE, Tx1RxDCRx0, DISPUPD),
+};
+
+const struct pad_config *variant_romstage_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(romstage_gpio_table);
+	return romstage_gpio_table;
+}